Irrigation And CAD Department Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 15,28,945Document Cost
Refer DocumentsTender Fee
₹ 11,800
Summary
Rayapatnam L.i. Scheme On Right Bank Of Wyra River In Rayapatnam Village, Madhira Mandal,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
552475Tender No
N I T. No: 09/2024-25, Dated:12-09-2024 (2nd Call)Tender Authority
Irrigation And CAD Department ViewPurchaser Address
-Website
http://https://irrigation.telangana.gov.in/icad/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Rayapatnam L.I.Scheme;Providing independent earthing by excavating a trench to adepth of 2.1 M in all soils, as per size specified in the Data,using 40mm dia B class GI pipe of 2.5 Mtrs length withnecessary accessories with hume pipe ring duly providingstaggered holes including filling with equal proportion of Saltand Charcoal in layers and all labour charges complete work as per specification or as directed by the Engineer-in-Charge
1
6635
6635
Rayapatnam L.I.Scheme;Supply and run of 2 of 14/0.3mm (1.50 sq.m) FRLS/ HFFRP.V.C. insulated ISI Copper Cable of make Polycab / Havells /Gold medal /L&T/ HPL with ISI mark in existing metallic /non-metallic conduit pipe for mains including cost andconveyance of all materials to site, labour charges and salestax etc., complete work as per specification or as directed by the Engineer-in-Charge
200
79
15800
Rayapatnam L.I.Scheme;Supply and fixing of 16A 3pin / 6A 3pin plug socket withindicator lamp and 16Amps fuse unit and 16 Amps switchcontrol (5 in one) of Milltec / Vimal opel / Maru mantero /Starex smil / CPL make with ISI mark on decolam sheetcovered board including earth continuity including cost andconveyance of all materials to site, labour charges and salestax etc. complete for finished item of work
8
514
4118
Rayapatnam L.I.Scheme;Supply and fixing of 6A ISI mark Flush type switch of makesAnchor / Gold Medal Olive / Million Zoom with 6A 3/2 pinwall plug socket of Anchor / Gold Medal Olive / MillionZoom make on a common switch board with earth connectionsin surface / consealed wiring including cost and conveyance ofall materialsa and labour charges but excluding GST.
15
158
2376
Rayapatnam L.I.Scheme;Wiring with run of 2 of 14/0.3mm (1.0 Sq.mm) FR / FRLSPVC insulated flexible ISI mark copper cable of GM / L&T /RPG / Havells / V-Guard / Power Flex / Polycab / Gold Medal/ Standard / Milion / Vimal / Sun cab / Paragaon / Fortune Artmake in existing pipe with 6A switch, Ceiling rose and 3mmthick hylam sheet covering to switch control box includingcost and conveyance of all material and all labour charges butexcluding GST etc., complete for light, bell, fan and exhaustfan points including cost and conveyance of all material andlabour charges complete work as per specification or as directed by the Engineer-in-Charge
10
618
6183
Rayapatnam L.I.Scheme;Supply and Laying of 25mm outer dia heavy (2.20mmthickness) grade with IS:9537 part 3 regid PVC pipe of makesSudhakar / Maco Plast / Modi. make concealed in Roof Slabswith all required PVC / Metallic Deep Boxes includingmasonary work and labour charges etc., complete includingmasonary work, including cost and conveyance of all material,all labour charges, complete work as per specification or as directed by the Engineer-in-Charge
50
102
5110
Rayapatnam L.I.Scheme;Supply and laying of 25mm dia 1.8mm thickP.V.C.pipe ISI mark of Sudhakar / Maco Plast / Modimake concealed in wall with PVC / Metallic junctionboxes and all required accessories including masonarywork for light, fan and separate plug point with supplyand fixing of suitable size Metallic deep box includingall labour charges etc., complete including masonarywork, including cost and conveyance of all material, alllabour charges, complete work as per specification or as directed by the Engineer-in-Charge
60
123
7380
Rayapatnam L.I.Scheme;Supply, Transportation, Installation, Testing and Commissioning of 500 KVA - 11KV /433 V Copper wound distribution transformer, out door type, plinth mounted, oil cooled type. TheTransformer shall be designed and manufactured as per IS:1180 with first filling of oil as per IS 335-1993 with standard fittings such as rated and terminal making plates, two earthing terminals, two lifting lugs etc., complete as per specification or as directed by the Engineer-in-Charge
2
1918185
3836370
Rayapatnam L.I.Scheme;Supply and run of earth lead of 25mm x 3mm copper strip including cost of all acessories and all labour charges etc, complete for lightning arrestors . complete as per specification or as directed by the Engineer-in-Charge.
30
1304
39120
Rayapatnam L.I.Scheme;Supply and run of earth lead of 50 mm x 6 mm copper strip including cost of all acessories and all labour charges etc, complete for transformer nuetral. complete as per specification or as directed by the Engineer-in-Charge
60
1304
78240
Rayapatnam L.I.Scheme;Supply and Run of earth lead of 50 x 6mm GI strip including cost of all accessories and all labour charges etc. complete for Transformer Body & DP structure. complete as per specification or as directed by the Engineer-in-Charge.
180
123
22140
Rayapatnam L.I.Scheme;Providing independent earthing other important equipment with 40mm dia 'B' class 2.5m long GI pipe a enclosed with 450 mm dia hume pipe ring with suitable refinforced RCC slab cover duly providing staggered holes of 16 Nos. of 12mm dia to earth electrode filling salt and charcoal around 150mm from the bottom of the piping to the bottom of CC chamber, the connection from the electrode through GI strip of 25mm x 6mm x 200mm length provided with suitable size of 14 Nos. holes with GI washers, nuts, bolts and all labour charges etc., complete as per IS 3043. or as directed by the Engineer-in-Charge
18
6635
119432
Rayapatnam L.I.Scheme;Supply and erecting AAA conductor of size 1 of 7/ 3.15 mm complete erected for over head line with stringing, binding with proper size of aluminium conductor for binding and suitable size of PG clamps for jumpering etc. complete for extension of 11 KV line. complete as per specification or as directed by the Engineer-in-Charge.
90
47
4230
Rayapatnam L.I.Scheme;Supply and run of one of "0" SWG (or 8.25mm dia) hard drawn bare copper wire including copper binding wire etc., complete as required inlcuding connections as required. ( 8.23 mm dia, 473 grams per meter )complete as per specification or as directed by the Engineer-in-Charge.
42
1304
54781
Rayapatnam L.I.Scheme;Supply and fixing of Stay set with guy insulator, anchor rod, bow, eyebolt CC (1:3:6) including excavation of pit, back filling including cost and conveyance of all materials labour etc., complete as per specification or as directed by the Engineer-in-Charge
6
2462
14772
Rayapatnam L.I.Scheme;Supply and erecting of single piece non linear resistor type (set of 3 Nos) for 3 wires, 11 KV OH line Sub Station with rated voltage of 9 KV (RMS) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, GI bolts, nuts and washers etc., required complete as per specification or as directed by the Engineer-in-Charge.
4
7612
30449
Rayapatnam L.I.Scheme;Supply, transportation and fixing of 11 KV Horn Gap (H.G.) fuse set and MS channel base with bolts and nuts etc. with metal parts etc. complete as per specification or as directed by the Engineer-in-Charge.
3
6902
20706
Rayapatnam L.I.Scheme;Supply, fixing, testing and commissioning of 11 KV 400A 3 pole gang operated disconnected AB switch suitable for horizontal mounting complete with operating handle and connecting rod (30mm dia) complete as per specification or as directed by the Engineer-in-Charge.
5
12463
62318
Rayapatnam L.I.Scheme;Supply and erecting 11 KV Pin type insulator complete erected for over head line cross arm with suitable hard ware etc. complete as per specification or as directed by the Engineer-in-Charge.
18
409
7362
Rayapatnam L.I.Scheme;Supply and erecting 11 KV Disc type insulator complete erected for over head line cross arm with suitable hard ware etc. complete as per specification or as directed by the Engineer-in-Charge.
6
795
4772
Rayapatnam L.I.Scheme;Supply and erection of six pole structure of total height of 10 mtrs complete consisting of 6 nos ISMB 175/85 RS jiosts with base plate , 18 nos of 100 mm X 50mm X 6 mm Channels of 3.30 mtrs length , 4 nos of 100 mm X 50mm X 6mm channels of 1.50 mtrs , 4 nos of 65mmX65mmX6mm angles of 2.00 mtrs length, 6 nos of 65mmX65mmX6mm angles of 4.50 mtrs length and suitable clamps, nuts and bolts etc, complete including painting of all metal parts with two coats of aluminium paint etc, completeincluding cost and conveyence of all materials and labour charges. complete as per specification or as directed by the Engineer-in-Charge.
1
324541
324541
Rayapatnam L.I.Scheme;Supply and Erection of 3 nos of 130 KW VT Pump sets including MS pipes, specials, cables and Pannel Board etc.including A). unitised items 1.a). Verticle turbine Pump with 0.18 Cumes discharge and 130KW Induction Motor with 415V terminal voltage, along with associated auxilaries and all associated equipment, 1.b).Gate Valves (Soft Seated) Resilient seated soft sealing and Sluice valves of 300mm for discharge of 0.18 Cumes for Each pump dia, 1.c). Star Delta starter panel, 2. Cables a) L.T.415V power cables and b). Control cables including cable trays laying of cable etc, 3. Miscellaneous (unforseen) items cost 1% on total equipment cost, 4. Spares @ 10% on equipment cost, 5. T&P @ 1% on equipment cost, 6. Freight @ 1% on total equipment cost, 7. Insurance @ 1% on total equipment cost and 8. Erection, Testing and commissioning @ 10% of cost of equipment and B). Common items 1. Statin Auxilary Board (415v) i).2Nos 800A incoming feeders from 5OOKVA transformer, ii). 300A outgoing feeders-4Nos(3Nos for motors and one no. for spare), iii).100A MCBS outcoming feeders-3Nos, iv). 63A ACBs outgoing feeder- 3Nos, v). 32A ACBs outgoing feeder- 4Nos, 2. 100AH, 24V DC Battery with Battery charger with D.C.D.B, 3. Lighting, 4. Power House Earthing, 5. Fire Protection System, 6. Capacitor units 415V, 7. Miscellaneous items @1% on total cost of equipment, 8. Spares @ 10% on equipment cost, 9. T&P @ 1% on equipment cost, 10. Freight @ 1% on total cost of equipment, 11. Insurance @ 1% on total cost of equipment and 12. Erection, Testing and commissioning @ 10% of cost of equipment
1
16372000
16372000
Rayapatnam L.I.Scheme;Supply, Fabrication and fixing of MS Double leaf gate of size 3.60Mx1.50m with 75x75x5mm MS angles, 12mm square rods at 10cmc/c both ways, MSHinges 150 mm long, MS Aldrops 300 mm long, with Red oxide initial coat including all materials, transportation, labour etc complete as per specification or as directed by the Engineer-in-Charge
1
23717
23717
Rayapatnam L.I.Scheme;Spreading of Gravel inside the fencing including all materials, transportation, labour etc complete as per specification or as directed by the Engineer-in-Charge
75
436
32723
Rayapatnam L.I.Scheme;Fabrication, supply and fixing of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge including all materials, transportation, labour etc complete job as per specification or as directed by the Engineer-in-Charge
145
685
99340
Rayapatnam L.I.Scheme;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete as per specification or as directed by the Engineer-in-Charge.
850
76
64770
Rayapatnam L.I.Scheme;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials and all operational, incidental and labour charges, curing etc.,complete including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer-in-Charge for a) Columns
2
10075
20150
Rayapatnam L.I.Scheme;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials and all operational, incidental and labour charges, curing etc.,complete including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer-in-Charge for a) Footings, Peadastals, Plinth beam
15
9466
142001
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete for craddle bed as per specification or as directed by the Engineer-in-Charge
46
7883
362632
Rayapatnam L.I.Scheme;Excavation for Structures- Mechanical MeansEarth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per specification or as directed by the Engineer-in-Charge
145
124
17980
Rayapatnam L.I.Scheme;Supply fabrication and fixing of MS double leaf gate of size 3.6Mx1.50M allround frame with 75x75x5mm angle and 12 mm square rods including all accessories labour etc complete work as per site or as directed by the Engineer in Charge
2
23717
47434
Rayapatnam L.I.Scheme;Supply and fixing of G.I chain link mesh( Diamond wire mesh) of size 2''x2'' arround the yard including labour etc complete work as per site or as directed by the Engineer in Charge
115
685
78787
Rayapatnam L.I.Scheme;a)Supply and fixing of 75x75x6mm MS angles at 6.80Kg/m for fencing posts including corner supports and diagonal supports complete as per specification or as directed by the Engineer-in-Charge.
781
115
90049
Rayapatnam L.I.Scheme;Supply, transportation and spreading of 40 mm metal in transformer yard including labour etc complete work as per site or as directed by the Engineer in Charge
55
2468
135790
Rayapatnam L.I.Scheme;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete as per specification or as directed by the Engineer-in-Charge.
1320
76
100584
Rayapatnam L.I.Scheme;Supply and placing of the Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer in Charge R.C.C grade M 20 (Design Mix) using 20 mm Graded Metal (MORTH) for Ring Beams, Bracings,Motor supporting beams etc.for gate columns
1
10075
10075
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for sub-structure / superstructure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge.
21
9053
190121
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge.
78
7883
614897
Rayapatnam L.I.Scheme;Excavation for foundation in hard rock of all toughness including boulders above 1.2 m dia. by controlled blasting method and controlling fly-rock by muffling arrangements for dam, spillway,intake structure and other appurtenant structures etc., including placing and levelling the excavated rock neatly in dump area or other place as directed etc., complete as per specification or as directed by the Engineer-in-Charge.
67
568
38063
Rayapatnam L.I.Scheme;Carting out of Surplus earth inluding all machinery and labour charges incluidng lead with in 1 km for competion of item of work as directed by the Engineer-in Charge
1478
43
64588
Rayapatnam L.I.Scheme;Fabrication, supply, erection, testing and commissioning of structural steel for MS pipes, flanges, specials for fixing of sluice valves, stem pipe for air valves of required size of pipe dia with all accessories with one coat of red oxide primer and painting with two coats of anti-corrosive bitumen paint including cost of all materials, machinery, labour,welding ,aligning finishingseal fixing etc.with allleads and lifts, complete as per specifications or as directed by the Engineerin-Charge
7602
156
1190473
Rayapatnam L.I.Scheme;Manufacture, supply and delivery and keeping position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept. for 100 mm dia
38
57546
2186767
Rayapatnam L.I.Scheme;Manufacture, supply and delivery and keeping position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement ofthe dept. for 150 mm dia
8
70225
561802
Rayapatnam L.I.Scheme;Manufacture, Supply and Delivery keeping postion Cast Carbon Steel rising / Non rising Sluice valve Pin 16 With spur gear arrangement Class 150 spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998.including labour etc complete work as per specification or as directed by the Engineer-in-Charge For 350mm dia Spur Gear Arrangement.
31
138888
4305556
Rayapatnam L.I.Scheme;Manufacture, Supply and Delivery keeping postion Cast Carbon Steel rising / Non rising Sluice valve Pin 16 With spur gear arrangement Class 150 spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998.including labour etc complete work as per specification or as directed by the Engineer-in-Charge For 400 mm dia Spur Gear Arrangement.
4
265794
1063178
Rayapatnam L.I.Scheme;Manufacture, Supply and Delivery keeping postion Cast Carbon Steel rising / Non rising Sluice valve Pin 16 With spur gear arrangement Class 150 spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998.including labour etc complete work as per specification or as directed by the Engineer-in-Charge For 500 mm dia Spur Gear Arrangement.
2
345447
690894
Rayapatnam L.I.Scheme;Manufacture, Supply and Delivery keeping postion Cast Carbon Steel rising / Non rising Sluice valve Pin 16 With spur gear arrangement Class 150 spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998.including labour etc complete work as per specification or as directed by the Engineer-in-Charge For 600mm dia Spur Gear Arrangement.
1
392140
392141
Rayapatnam L.I.Scheme;Manufacture, Supply and Delivery keeping postion Cast Carbon Steel rising / Non rising Sluice valve Pin 16 With spur gear arrangement Class 150 spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998.including labour etc complete work as per specification or as directed by the Engineer-in-Charge For 700mm dia Spur Gear Arrangement.
1
743714
743715
Rayapatnam L.I.Scheme;Manufacture, Supply and Delivery keeping postion Cast Carbon Steel rising / Non rising Sluice valve Pin 16 With spur gear arrangement Class 150 spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998.including labour etc complete work as per specification or as directed by the Engineer-in-Charge For 750mm dia Spur Gear Arrangement.
1
804987
804987
Rayapatnam L.I.Scheme;Manufacture, Supply, Delivery laying and jointing of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG including labour material complete work as per specification or as directed by the Engineer-in-Charge - b) 315 mm dia 4Kg/cm2
10301
1799
18538710
Rayapatnam L.I.Scheme;Manufacture, Supply, Delivery laying and jointing of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG including labour material complete work as per specification or as directed by the Engineer-in-Charge - a) 400 mm dia 4Kg/cm2
1141
2944
3359903
Rayapatnam L.I.Scheme;Manufacture, Supply, Delivery laying and jointing of 500 mm dia of K7 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9/K7 suitable for push-onjoint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation, lowering, jointing and testing including material, labour etc. complete work as per specification or as directed by the Engineer-in-Charge.
853
10751
9170774
Rayapatnam L.I.Scheme;Manufacture, Supply, Delivery laying and jointing of 600 mm dia of K7 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9/K7 suitable for push-onjoint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation, lowering, jointing and testing including material, labour etc. complete work as per specification or as directed by the Engineer-in-Charge.
218
14336
3125270
Rayapatnam L.I.Scheme;Manufacture, Supply, Delivery laying and jointing of 700 mm dia of K7 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9/K7 suitable for push-onjoint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation, lowering, jointing and testing including material, labour etc. complete work as per specification or as directed by the Engineer-in-Charge.
345
18705
6453536
Rayapatnam L.I.Scheme;Manufacture, Supply, Delivery laying and jointing of 750 mm dia of K7 Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9/K7 suitable for push-onjoint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation, lowering, jointing and testing including material, labour etc. complete work as per specification or as directed by the Engineer-in-Charge.
289
21077
6091369
Rayapatnam L.I.Scheme;Excavation in ordnary rock without blasting for foundations of canal cross drainage and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete with initial lead upto 50 m and initial lift upto 3 m.
3223
157
508267
Rayapatnam L.I.Scheme;Excavation for Structures- Mechanical MeansEarth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per specification or as directed by the Engineer-in-Charge
17327
124
2148548
Rayapatnam L.I.Scheme;Fabrication, supply, erection, testing and commissioning of structural steel for MS pipes, flanges, specials for fixing of sluice valves, stem pipe for air valves of required size of pipe dia with all accessories with one coat of red oxide primer and painting with two coats of anti-corrosive bitumen paint including cost of all materials, machinery, labour,welding ,aligning finishingseal fixing etc.with allleads and lifts, complete as per specifications or as directed by the Engineerin-Charge
246
156
38524
Rayapatnam L.I.Scheme;Manufacture, Supply and delivery of 150 mm pn 16 DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of gradeGGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electro static powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept or as specification
41
23671
970540
Rayapatnam L.I.Scheme;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete as per specification or as directed by the Engineer-in-Charge. .
15094
76
1150163
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for sub-structure / superstructure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete , complete as per specification or as directed by the Engineer in Charge
231.5
9053
2095862
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer in Charge
75.5
7883
595189
Rayapatnam L.I.Scheme;Excavation for Structures- Mechanical MeansEarth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per specification or as directed by the Engineer-in-Charge
623
124
77252
Rayapatnam L.I.Scheme;Fabrication, supply, erection, testing and commissioning of structural steel for MS pipes, flanges, specials for fixing of sluice valves, stem pipe for air valves of required size of pipe dia with all accessories with one coat of red oxide primer and painting with two coats of anti-corrosive bitumen paint including cost of all materials, machinery, labour,welding ,aligning finishingseal fixing etc.with allleads and lifts, complete as per specifications or as directed by the Engineerin-Charge
1253
156
196220
Rayapatnam L.I.Scheme;Carting out of Surplus earth inluding all machinery and labour charges incluidng lead with in 1 km for competion of item of work as directed by the Engineer-in Charge
1124
43
49119
Rayapatnam L.I.Scheme;Supply and fixing of Machine End pair (Socket +Spigot) 600 mm dia per pair with 100mm length MS Barrel on Each side of Socket and Spigot for providing M.S Specials on PSC pipelines excluding cost of M.S Specials including cost of conveyance to site labour etc. complete as per speicification or as directed by the Engineer-in-Charge
12
24096
289159
Rayapatnam L.I.Scheme;Manufacture, Supply and delivery of 600 mm 10 Kg/cm2 zero velocityvalve/ PSLV with MS Fabricated Body with Plain ends. as per AWWA, including Labour charges for lowering & keeping in position as per speicification or as directed by the Engineer-in-Charge
5
201075
1005377
Rayapatnam L.I.Scheme;Manufacture, Supply and delivery of 200 mm dia Air cushion valves 15 Kg Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, including Labour charges for lowering & keeping in position as per speicification or as directed by the Engineer-in-Charge
2
136588
273178
Rayapatnam L.I.Scheme;Manufacture, supply, delivery and lowering fixing of Single Chamber 200 mm DI Air valve 16 Kg/ cm2 with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as perI.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc.,all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept.
14
76908
1076723
Rayapatnam L.I.Scheme;Manufacture, supply ,delivery and laying and jointing of 600 mm M.S Pipes 8 mm thick conforming to IS 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia M.S.Rings at Each end of the pipe/food grade epoxy painting and out coating with cement mortar (1:3) 30mm thick by shortcreting or gunetting duly providing wire mesh of size 50x50x3mm including costof all materials, labour charges, transportation complete as per specification or as directed by the Engineer-in-Charge
2975
16995
50562208
Rayapatnam L.I.Scheme;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete as per specification or as directed by the Engineer-in-Charge.
2540
76
193548
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, gradedaggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., completecomplete as per specification or as directed by the Engineer-in-Charge
20
9892
197846
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge
10
8251
82515
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, gradedaggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge for mat
14
9053
126748
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge for foundations.
20
7883
157666
Rayapatnam L.I.Scheme;Excavation in ordnary rock without blasting for foundations of canal cross drainageand other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete as per specification or as directed by the Engineer-in-ChargeFor HR without Blasting
785
157
123795
Rayapatnam L.I.Scheme;Excavation for Structures- Mechanical MeansEarth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per specification or as directed by the Engineer-in-Charge
7085
124
878540
Rayapatnam L.I.Scheme;Supply, transport and Spreading of Gravel including labour as per site or as directed by the Engineer-in-Charge
4
436
1745
Rayapatnam L.I.Scheme;Manufacture, Supply and delivery of 200 mm dia Air cushion valves 15 Kg Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, including Labour charges for lowering & keeping in position as per speicification or as directed by the Engineer-in-Charge
1
136588
136589
Rayapatnam L.I.Scheme;Fabrication, supply, erection, testing and commissioning of structural steel for MS pipes, flanges, specials for fixing of sluice valves, stem pipe for air valves of required size of pipe dia with all accessories with one coat of red oxide primer and painting with two coats of anti-corrosive bitumen paint including cost of all materials, machinery, labour,welding ,aligning finishingseal fixing etc.with allleads and lifts, complete as per specifications or as directed by the Engineerin-Charge
7410
156
1160406
Rayapatnam L.I.Scheme;Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover 300 mm PN 20 Non ReturnValve as per IS : 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. including Labour charges for lowering & keeping in position as per speicification or as directed by the Engineer-in-Charge
3
82400
247200
Rayapatnam L.I.Scheme;Manufacture, Supply and Delivery 300 MM 20 Kg for Enclosed Spur Gear Arrangement. of Cast Carbon Steel rising / Nonrising spindle sluice valve design standard as per IS:14846/2000 for Water Supply Scheme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1998. (The valve shall be used for High pressure schemes & pumping stations) including Labour charges for lowering & keeping in position as per speicification or as directed by the Engineer-in-Charge
4
103893
415574
Rayapatnam L.I.Scheme;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls up to 3.66 m height
50
137
6895
Rayapatnam L.I.Scheme;Painting to new walls with Oil bound distemper in two coats for inside pump house paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls up to 7.32 m height
72
143
10303
Rayapatnam L.I.Scheme;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls up to 3.66 m height
50
230
11520
Rayapatnam L.I.Scheme;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls up to 7.32 m height
80
235
18856
Rayapatnam L.I.Scheme;Painting to new iron work with 2 coats of plastic emulsion paint ( 20Sqm /lit)of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer in Charge
41
118
4854
Rayapatnam L.I.Scheme;Supply & fixing of 0.90mx1.20m size Windows with suitable shutter frames with 16 gauge shutter sheet, window frames, hinges, tower bolts, handles, safety rods with one coat red oxide primer including fabrication, labour, all materials, accessories etc complete as per specification or as directed by the Engineer-in-Charge
2
7283
14568
Rayapatnam L.I.Scheme;Supply & fixing of 3.00mx3.00m size Rolling shutters Supply machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
18
5217
93910
Rayapatnam L.I.Scheme;Plastering 20mm thick in two coats with base coat in CM(1:5) 16mm thick and top coat in CM(1:4) 4mm thick for even surface incluiding cost and conveyance of all materials, machinary and labour charges forcompletion of work as per specification or as directed by the Engineer in Charge of brick walls up to 3.66
50
536
26835
Rayapatnam L.I.Scheme;Plastering 20mm thick in two coats with base coat in CM(1:5) 16mm thick and top coat in CM(1:4) 4mm thick for even surface of brick walls (outside) incluiding cost and conveyance of all materials, machinary and labour charges forcompletion of work as per specification or as directed by the Engineer in Charge up to 7.32 M
80
542
43360
Rayapatnam L.I.Scheme;Plastering 12mm thick in two coats with base coat in CM(1:5) 8mm thick and top coat in CM(1:4) 4mm thick for even surface of brick walls (Inside) incluiding cost and conveyance of all materials, machinary and labour charges forcompletion of work as per specification or as directed by the Engineer in Charge
98
512
50205
Rayapatnam L.I.Scheme;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete as per specification or as directed by the Engineer-in-Charge.
10800
76
822960
Rayapatnam L.I.Scheme;Hoisting of Girders in position incluidng labour as per standarard speicfication or as directed by the Engineer-in-Charge
2088
9
18792
Rayapatnam L.I.Scheme;Supply, fabrication of Pump base Girders and Gantry Girders including all Labour charges for fabricating structural steel works cost of welding rods, power charges, etc complete job as per specification or as directed by the Engineer-in-Charge
2088
111
233647
Rayapatnam L.I.Scheme;Brick masonry in CM(1:5) using second class bricks including all materials, labour etc complete work as per specification or as directed by the Engineer-in-Charge for super structure up to 7.32 m
14
9678
135492
Rayapatnam L.I.Scheme;Brick masonry in CM(1:5) using second class bricks including all materials, labour etc complete work as per specification or as directed by the Engineer-in-Charge for super structure up to 3.66 m
9
9450
85051
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge (with mechanical mixer)
16
8251
132024
Rayapatnam L.I.Scheme;Supply and placing of the Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer in Charge R.C.C grade M 20 (Design Mix) using 20 mm Graded Metal (MORTH) for Ring Beams, Bracings,Motor supporting beams etc. for 150mm thick Roof Slab
43
2430
104524
Rayapatnam L.I.Scheme;Supply and placing of the Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer in Charge R.C.C grade M 20 (Design Mix) using 20 mm Graded Metal (MORTH) for Ring Beams, Bracings,Motor supporting beams etc for Sunshades
13
1398
18186
Rayapatnam L.I.Scheme;Supply and placing of the Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer in Charge R.C.C grade M 20 (Design Mix) using 20 mm Graded Metal (MORTH) for Ring Beams, Bracings,Motor supporting beams etc. Lintel Beam
1
10075
10075
Rayapatnam L.I.Scheme;Supply and placing of the Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer in Charge R.C.C grade M 20 (Design Mix) using 20 mm Graded Metal (MORTH) for Ring Beams, Bracings,Motor supporting beams etc - for Columns
4
10075
40300
Rayapatnam L.I.Scheme;Supply and placing of the Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer in Charge R.C.C grade M 20 (Design Mix) using 20 mm Graded Metal (MORTH) for Ring Beams, Bracings,Motor supporting beams etc.-for Floor slab
43
2442
105023
Rayapatnam L.I.Scheme;Supply and placing of the Nominal Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete as per specification or as directed by the Engineer in Charge R.C.C grade M 20 (Design Mix) using 20 mm Graded Metal (MORTH) for Ring Beams, Bracings,Motor supporting beams etc.-Beams
16
15426
246819
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, gradedaggregates for well steining including cost of all materials, machinery, labour, formwork,scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curingetc., complete as per specification or as directed by the Engineer in Charge for Well Steining
73
9892
722138
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, gradedaggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge for Mat
25
9053
226335
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete as per specification or as directed by the Engineer-in-Charge
20
7883
157666
Rayapatnam L.I.Scheme;Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for foundations of canal cross drainage and other appurtenant structures and placing the excavated rock neatly in specified dump area or stack yard as directed etc., complete as per specification or as directed by the Engineer-in-Charge
337
568
191450
Rayapatnam L.I.Scheme;Excavation for foundation in all kinds of soil including boulders upto 0.30 m diameter for dam, spillway, intake structure and other appurtenant works and placing the excavated soil neatly in dump area or disposing off the same as directed etc., complete as per specification or as directed by the Engineer-in-Charge
759
124
94116
Rayapatnam L.I.Scheme;Providing, supply, laying and jointing of RCC S/S pipe 1200 mm dia NP3 class including cost and conveyance of all materials etc., complete as per specification or as direced by the Engineer-in-Charge
70
19969
1397886
Rayapatnam L.I.Scheme;Supply and fixing of Trash rack of size 1.80 x 1.80 M including cost of material, transportation, labour etc complete work as per specification or as directed by the Engineer-in-Charge
1
6922
6922
Rayapatnam L.I.Scheme;Formation of Ring Bund with gunny bags with 50%sand and 50% earth including cost of refilling, guny bags, stitching labour charges etc., complete
12142
40
485680
Rayapatnam L.I.Scheme;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete as per specification or as directed by the Engineer-in-Charge.
681
76
51892
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, gradedaggregates for well steining including cost of all materials, machinery, labour, formwork,scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curingetc., complete as per specification or as directed by the Engineer-in-Charge
9
9892
89031
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, gradedaggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 330 Kg / Cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80Cum, Blending Ratio of CA--65:35, FA : 0.45 Cum)
4
9053
36214
Rayapatnam L.I.Scheme;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete work as per specification or as directed by the Engineer-in-Charge for foundations
41
7883
323215
Rayapatnam L.I.Scheme;Excavation in hard rock requiring blasting including boulders above 0.6 m upto 1.2 m dia. forfoundations of canal cross drainage and other appurtenant structures and placing theexcavated stuff neatly in specified dump area or disposing off the same as directed etc.,complete work as per specification or as directed by the Engineer-in-Charge
67
568
38063
Rayapatnam L.I.Scheme;Excavation for Structures- Mechanical MeansEarth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete work as per specification or as directed by the Engineer-in-Charge
1696
124
210304
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements