Indian Institute Of Technology Tender

Supply, Installation, Testing & commissioning (SITC) of 1000W SMD LED Floodlight fixture with minimum System efficacy of 130 lm/W (130000 lumens). Luminaire shall be made up of LM6/ADC12 Alloy, non-corrosive, pure polyester power coated die cast Aluminium housing with PC lens. Luminaire should be of dimension 744mm x 368mm x 120mm height ± 10mm height and the approximate weight should be within the 28.0Kg ± 0.5Kg. Luminaire should be with 15°, 30° and 60° beam angle option. Luminaire should be made of four individual modules of maximum 250W each. All external hardware must be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic package of wattage of 1W-3W from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul/GE should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Maximum LENS dome top temperature shall be less than 95°C at 45°C ambient temperature. Luminaire shall be with IP66 and IK08 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K, CRI of Minimum 70 and SDCM < 5. MCPCB with Aluminium core and copper thickness of 35 micron to be used for LED mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-280V AC. Driver Efficiency > 85% & 5 KV internal surge protection with additional 10KV SPD, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. LED Driver must have short circuit, open circuit, Auto cut-off protection for low and high input voltage. Individual drivers should be provided with individual modules along with ventilated enclosure to hide the wirings. Driver must be with Aluminium casing. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. Lights should be of 5 Years warranty. Installation on 20 meter high mast of fixed height pole & head frame, with required elevated safe working platform of desired height with complete terminations and all required accessories. Similar to Make: Wipro, Model: Olympus Pro Floodlight, LF46-123-015-57-FF

Supply, Installation, Testing & commissioning (SITC) of 1000W SMD LED Floodlight fixture with minimum System efficacy of 130 lm/W (130000 lumens). Luminaire shall be made up of LM6/ADC12 Alloy, non-corrosive, pure polyester power coated die cast Aluminium housing with PC lens. Luminaire should be of dimension 744mm x 368mm x 120mm height ± 10mm height and the approximate weight should be within the 28.0Kg ± 0.5Kg. Luminaire should be with 15°, 30° and 60° beam angle option. Luminaire should be made of four individual modules of maximum 250W each. All external hardware must be of SS304 grade. LM 80-08 compliant LEDs of EMC/ceramic package of wattage of 1W-3W from reputed makes such as Nichia/Cree/ Bridgelux/ Lumiled/ Osram/Seoul/GE should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Maximum LENS dome top temperature shall be less than 95°C at 45°C ambient temperature. Luminaire shall be with IP66 and IK08 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K, CRI of Minimum 70 and SDCM < 5. MCPCB with Aluminium core and copper thickness of 35 micron to be used for LED mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-280V AC. Driver Efficiency > 85% & 5 KV internal surge protection with additional 10KV SPD, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. LED Driver must have short circuit, open circuit, Auto cut-off protection for low and high input voltage. Individual drivers should be provided with individual modules along with ventilated enclosure to hide the wirings. Driver must be with Aluminium casing. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. Lights should be of 5 Years warranty. Installation on 20 meter high mast of fixed height pole & head frame, with required elevated safe working platform of desired height with complete terminations and all required accessories. Similar to Make: Wipro, Model: Olympus Pro Floodlight, LF46-123-030-57-FF

Supply, Installation, Testing and Commisioning (SITC) of 20 M (17M + HF 3M) LIGHTING STADIUM MAST FABRICATED PART AS PER DIMENSION :TOP DIAMETER -200 mm, BOTTOM DIAMETER 610 mm, SECTION - 3(SECTION LENGTH - 8900 mm /8900 mm/3000 mm) PLATE THICKNESS - 4,4,5 mm.BASE PLATE - 840 mm x 30 mm,PCD - 740 mm, With Double dome aviation lamp, Lighntning Arrestor and also Includes the follwing material and works with all required accessories as per the directiond of Engineer-In-Charge. a) Supply of Foundation BOLT M30 x 850 mm x 16 Nos with Template and Anchor Plate b) Supply, handling and Installation of HEAD FRAME with Maintenance cage and Light Fixtures Mounting Platform, incuding all required accessories. c) SUPPLY OF ACCESSORIES SET d) Supply and Installation of Man Riding Unit with all required accessories. e) The scope of work Includes SITC of the 20M height Lighting Stadium Mast including transportation to site, handling at site and loading shifting to the location, installation in all respectes with required Crane/Hydra. f) Inspection of the safe installation with authorised body or licensed agency and submission of safety certification included in the work. g) Laying of wire from flood lights at top of the mast till feeder pillar box at bottom, excluding the wire. h) SITC of Oudoor Feeder Pillar Unit IP 55 rated, power supply to the Stadium Lighting Mast of not less than rated 40KW. I/P 63A 4P MCB, 4 Way Terminal for input and 16 output terminal connections with 6-10A SP MCB for each output with 3 phase uniform loading, Digital Timer, Toggle switch of 6A for Auto Manual Selection, Single Pole MCBs, Overload Relay of 2.5A - 4A, Contactor of Motor Control, 4/3way terminal for motor, Push Switch for Motor operation, Rotary Switch for FWD/REV selection, Pendent Box for Motor Operation.