Indian Institute Of Chemical Technology Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 1,14,945Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_CSIR_42554_1Bid Award Id
ViewTender No
ESD/L-166/19Tender Authority
Indian Institute Of Chemical Technology ViewPurchaser Address
-Website
http://csir.res.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane 4 mm thick
180
-
-
... More
Removing existing paint , water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete as directed by engineer-in-charge
168
-
-
... More
Providing and applying white cement based putty two or more coats , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with one coat of cement primer etc., complete as directed by Engineer-in-charge JK/Birla or its approved equivalent make
692
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including one coat of cement primer as directed by Engineer-in-charge .
Asian /Beger or its equivalent approved make
-
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as directed by engineer-in-charge Asian /Beger or its equivalent approved make
-
-
-
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The systemshould rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.,screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-inchargE With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
Note :Armstrong make
-
-
-
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints
Size of Tile 600x600 mm
Somany/Johnson/RAK/Nitco or its equivalent approved make
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. external work
25 mm nominal outer dia Pipes
Note::ashirvad /Astral or its equivalent make
30
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
... More
Providing and fixing ball valve with SS Ball and SS Pindle a of approved quality, s per IS-Class I ,Indian Standards 25 mm nominal bore
Make:Heavy Duty
-
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)
-
-
-
... More
Providing, fixing and jointing/welding with Polypropylene material 110mm outer diameter Polypropylene pipes of approved make with necessary G.I. Clamps and base etc., with all leads and lifts complete as directed by Engineer-in-charge.
15
-
-
... More
Providing and fixing 110mm outer diameter Polypropylene plain bends of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge.
4
-
-
... More
Providing and fixing 110mm outer diameter Polypropylene T junctions of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge
4
-
-
... More
Providing and fixing 110mm outer diameter Polypropylene flange joint (two flanges coupled with 1/2"x5" nuts &bolts as directed) of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge.
10
-
-
... More
Providing and fixing 110mm diameter Polypropylene dummies of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge.
2
-
-
... More
Island benches 1500mm/1800mm wide x900mm standing height(or nearest) staright segment of suitable lengt Base storage modules 570mm deep x675mm heig (or nearest) on C-frame as shown in the suggestive sketch of suitable drawer,shelf and door configuration. upright 2-tier reagent shelves 305mm widex610mm height (or nearest) of granite base and length as indicated in the sketch,with 4nos of electrical tiny trip SPMCB and socket for electrical power at intervals of 05mts as suggested in the sketch and pre-wired at the factory/at site. Granite work surface 18mm thick,of suitable size as per manufactures factory standards with suitable marine ply Backing With/without sink as per the laboratory layout given. Additionally envisaged features with quality and size as per laboratory layout given.
10
-
-
... More
Installation charges for island benches as per Item no .20
10
-
-
... More
Dismantling existing work benches(in steel or combination of wood) including electrical and utility lines and disposal in a planned manner as directed by Engineer-in-charge.
10
-
-
... More
Providing and installing Type;Bench Fume Hood size (mm) 1500 lengthx1000Depthx1500 Height(excluding the height of base storage modules) or nearest constant exhaust open By-Pass type the bypass opening is aerodynamically desigened C-frame design for base structure with fume hood depth not less than 1000mm.Hood face openings shall be desigened with aerodynamically steamlined edges. Exhaust volume shall remain constant irrespective of sash position. conformance to ASHRAE 110;95&EN 14175;2003 (type tested as manufactured) Epoxy powder coated externally in Blue or any standard acceptable colour with interrnal laminate lining. the top adopter shall have flanged opening on the top of fume hood suitable for 250mm/300mm dia duct as per supplier's standards.as directed by engineer-in-charge
4
-
-
... More
Dismantling existing Fume hoods including electrical and utility lines and disposal in a planned manner as directed by Engineer-in-charge.
4
-
-
... More
Grouting the porous slabs through entry ports with cement slurry ( grout ratio 15 Kgs cement with 20-22 litres of water ) Prior to grouting all drilled holes shall be cleaned with compressed air.
100
-
-
... More
Removing the existing 4mm thick bitumunious old damaged water proofing treatment and disposal of all rubbish outside IICT-Campus to the approved municipal dumping ground with all leads and lifts etc. complete and as directed by Engineer-in charge.
180
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, of tipper 200cft including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
-
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area beyond 3 sq. Metres
15
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)
5
-
-
... More
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
-
-
-
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
2
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
3.45
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Make: Johnson/Somany/RAK/Nitco or its equivalent make
21
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.Make: Johnson/Somany/RAK/Nitco or its equivalent make
3.12
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls
etc.25 mm nominal outer dia Pipes
Note:A shirvad/Astral or its equivalent approved make
30
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. Complete 25 to 40 mm nominal bore
4
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing
for 48 hours (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)
3.45
-
-
... More
Providing and fixing soil, waste and vent pipes
100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
10
-
-
... More
Providing and fixing soil, waste and vent pipes
75 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
10
-
-
... More
Providing and fixing plain bend of required degree. 100mm dia Sand cast iron S&S as per IS : 3989
2
-
-
... More
Providing and fixing plain bend of required degree.
75mm dia Sand cast iron S&S as per IS : 3989
2
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 3989
2
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75 mm dia
Sand cast iron S&S as per IS - 3989
2
-
-
... More
Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead.
5
-
-
... More
Providing and fixing C.P liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
2
-
-
... More
Providing and fixing C.P towel rod complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms
2
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
1
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require including all fittings as directed by engineer-in-charge
1
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board
610x510 mm bowl depth 200 mm
2
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Second class teak wood
0.5
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size
20
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
5.04
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screwsetc. Complete 300x16 mm
2
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
300x10 mm
2
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
125 mm
4
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
-
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plainwindow sills, staircases and spiral stair cases above plinth level up tofloor five level, including the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
1
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at unctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. For fixed portion:
Powder coated aluminium (minimum thickness of powder coating 50 micron
137
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at unctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-chargeFor shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required includingthe cost of EPDM rubber / neoprene gasket required
412
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)
37
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size
12
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
5
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes 110 mm diameter
30
-
-
... More
Providing and fixing c.p grating of approved quality and colour Circular type 100 mm nominal dia
2
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors100 mm inlet and 100 mm outletSand cast iron S&S as per IS: 3989
2
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparentor dyed to required shade according to IS: 1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approvedstandard section and fixed to the existing window frame with C.P.brass/ stainless steel screws @ 200 mm centre to centre, includingcutting the grill to proper opening size for fixing and operation ofhandles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction ofEngineer-in-charge. (Only weight of grill to be measured for payment
50
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
1
-
-
... More
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
6
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :Cement mortar 1:6 (1 cement : 6 fine sand)
6.5
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
26
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Asian / Beger or its equivalent make
26
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required.Jindal or its equivalent approved make
3.5
-
-
... More
Providing and laying cinder concrete 1:15 ( 1 cement : 15 cinder of 12.5mm nominal size) on floors laid to slope including consolidating the same and as directed by Engineer-In-Charge.
1.035
-
-
... More
Labour charges for removing and Re-fixing aluminium partition with necessary glass & Partical boards, rubber bedding asket etc., as directed by engineer-in-Charge.
5
-
-
... More
Providing and applying Brush Bond RFX of FOSROC or its equilent approved product in over all three coats as per the manufacturers specifications including providing/laying Geo-textile of 40GSM joints filling with brush bond RFX paste whereever required,surface preparation cleaning with wire brushes,washing with water for removing all dirt etc.. complete with all leads and lifts and as directed by Engineer-Incharge.
16
-
-
... More
Providing and laying F.R.P lining in Gutter with 3mm thickness with required slope and making good as directed by Engineer-In-Charge.
18
-
-
... More
Exposing the corroded steel around its full circumference and cleaning the same to remove all loose scales and corrosion deposits by hard brush with emery paper or, by any suitable mechanical means as directed by Engineer-in-Charge, so as to get bright conditions and removing the corrosion deposits from pits and imperfections within its surface by compressed air and water at a high pressure. Providing and applying one full coat of anti corrosive treatment of epoxy 'A' (Nitozinc primer of FOSROC Product ) or any other approved compound over the cleaned and prepared surface as per manufacturers specifications including, providing, sprinkling silica sand on freshly coated reinforcement to have a proper bond
50
-
-
... More
Cleaning of gutter and disposal of waste materials by mechanical means, including loading,transporting, unloading to approved municipal ground as directed by Engineer-in-charge.
25
-
-
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.for internal Complete as directed by engineer-in-charge
514
-
-
... More
Electrical Items:
Point wiring in PVC conduit, with indicator modular type switch . Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed pvc conduit, with modular switch, modular plate, suitable G.I box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required.
Group - C
10
-
-
... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable and 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable as earth wire in existing surface/
recessed steel/PVC conduit including dismantling as required.
Group -C
5
-
-
... More
Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required.(i)3 x 2.5 sq.mm
200
-
-
... More
Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required.(ii)3 x 4 sq.mm
400
-
-
... More
Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required.(iii)5x6 sq.mm
120
-
-
... More
S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess cutting the wall and making good the same in case of recessed conduit as required.(Make:Sudhakar) 25mm
400
-
-
... More
S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required .(i) 5/6A One way Switch, Indicator Type
200
-
-
... More
S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required(ii) 15/16A One way Switch,Indicator Type
100
-
-
... More
S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required(iii) 2pin & 3pin 5/6A socket outlet
100
-
-
... More
S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required(iv) 6pin 15A/16A power socket outlet
100
-
-
... More
S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required.4 module
5
-
-
... More
S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required(ii) 6 module
10
-
-
... More
S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required(iii) 12 module
50
-
-
... More
S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required i)Single pole
32
-
-
... More
S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required (ii) Triple pole
3
-
-
... More
S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required(iii) Triple pole & Neutral
3
-
-
... More
Supplying and fixing of 20A, 240V, SPN Industrial type socket outlet with 2pole and earth, metal enclosed plug top alongwith 20A. C curve ,SPMCB ins heet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc., as required by the site Engineer.
2
-
-
... More
Supply of 1x18 watts LED Tubelight set, consisting of box type industrial housing suitable for 1x18w LED tube ,including LED Tube ,complete with all accessories as directed by Incharge Electrical.
Box type TL fixture:Cat.no.TMC501P 1xT-LED 22W P3241
make:Philips LED Tube: 18watt , 4 feet , make:Philips
10
-
-
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED fittings of all types, with allaccessories and tube etc. directly on ceiling/ wall, includingconnection with 1.5 sq. mm FR PVC insulated, copper conductor,single core cable and earthing etc. as required.
10
-
-
... More
Supply of energy efficient ceiling fans 1200 mm sweep with modular electronic 4 positions step type dimmers complete with all accessories and fixing the dimmer in the existing modular plate with connections etc., as required. Make: Crompton / Bajaj Color:White
5
-
-
... More
Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard length (upto 30 cm) with 1.5
sq. mm FRLS PVC insulated, copper conductor, single core cable
etc. as required.
5
-
-
... More
Removing of Existing DB's,Switch Boards FTLs, and Ceiling fans and other related Electrical Installations of Laboratory Buildings:- Removing of existing lighting Switch boards,power boards,False ceiling fixtures,T/Ls ,ceiling fans and all electrical accessories as directed by Engineer incharge. The entire material has to be handed over in good condition to department.( Above work of Each Lab. building = 1 Job)
1
-
-
... More
Supplying & fixing of Ceiling rose,jumbo type on existing junction box as required.
Make: Anchor
15
-
-
... More
Supply of false ceiling recess mounted 600mmx600mm LED panel luminaire complete set including driver etc as directed by Engineer incharge. cat.no philips RC140B 33watts , make:philips
20
-
-
... More
Installation,Testing & Commissioning of recess mounted LED luminaires with necessary chain supports in the existing false ceiling ,connections etc; as directed by Engineer incharge.
20
-
-
... More
Supply of following XLPE aluminum armoured cable 1.1kV grade of size. Make:Glostar / Havells/Finolex 3.5C x 25sq.mm
70
-
-
... More
Laying of following XLPE aluminum armoured cable in existing trench or on surface / recess including cutting the wall / floor , and making good the same with sand,cement etc; as required. 4cx2.5sq.mm to 4C x 50 sq.mm
200
-
-
... More
Termination of the following sizes of PVC insulated Aluminium conductor armoured cable using glands, copper sockets, bolts & nuts etc., the gland to be earthed by 12 SWG copper wire to the nearest earth bus. i)4C x 2.5sq.mm (19mm)
10
-
-
... More
Termination of the following sizes of PVC insulated Aluminium conductor armoured cable using glands, copper sockets, bolts & nuts etc., the gland to be earthed by 12 SWG copper wire to the nearest earth bus. ii)3.5C x 25sq.mm (28mm)
4
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)
8 way, Double door
2
-
-
... More
Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required.
Make: Legrand
3
-
-
... More
P/F 4mm copper earth wire with conduit/cable :
Providing and fixing 4.00mm dia. copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.
70
-
-
... More
S/F 'C' series MCB: Supplying and fixing of 63A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required.
3
-
-
... More
Supplying and fixing of 3 pin flame proof 16amps power socket with plug top and complete set as directed by Engineer incharge.
10
-
-
... More
Supplying of heavy duty exhaust fan of size 450mmsweep, 230V,900rpm, 50HZ with wall mounting rings, brackets, louvers etc., complete set. Make: Crompton
3
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. On existing window/wall as directed by Engineer incharge.
Upto 450 mm sweep
3
-
-
... More
Supplying and fixing of following ways surface/ recess
mounting, vertical type, 415 V, TPN MCB distribution board of
sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used
where 3 phase outlets are required.)
8 way (4 + 24), Double door
2
-
-
... More
AirConditioning :Supply of 2.0 TR invertor model, 5 star Split AC unit with high wall mounted indoor unit and outdoor condensing unit hermetically sealed compressor suitable for operation on 230 V, 50 HZ, 1 phase AC supply capable of performing cooling dehumidifying air circulation and filtering with cooling and condensing units with 3.5 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible chord and cordless remote control. Makes: Carrier, Blue star, Voltas, LG or equavalent with prior approval of Engineer
1
-
-
... More
Supply of 1.0 TR invertor model, 5 star Split AC unit with high wall mounted indoor unit and outdoor condensing unit hermetically sealed compressor suitable for operation on 230 V, 50 HZ, 1 phase AC supply capable of performing cooling dehumidifying air circulation and filtering with cooling and condensing units with 3.5 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible chord and cordless remote control. Makes: Carrier, Blue star, Voltas, LG or equavalent with prior approval of Engineer
4
-
-
... More
Providing 2 runs of copper tubes for suction and liquid between indoor and outdoor unit for high wall split AC including foaming etc, complete. 1) 5/8”x ¼” or
2) ½”x ¼” or as per manufacturer standards
25
-
-
... More
Supply of 5.0 KVA stabiliser Makes: V-guard/Real guard/Unistab/ITL
1
-
-
... More
Supply of 3.0 KVA stabiliser Makes: V-guard/Real guard/Unistab/ITL
4
-
-
... More
Installation of Split Air Conditioner.
11
-
-
... More
Supply, fabrication of 1 set MS bracket suitable for fixing our door unit of Split AC unit
5
-
-
... More
Supply of PVC insulated 3 core 1.5 sqmm flexible copper cable of makes Finolex / RR kable / Havells/ Polycab / RPG / KEI or manufacturer standards
25
-
-
... More
Supply of PVC insulated 4 core 1.5 sqmm flexible copper cable of makes Finolex / RR kable / Havells/ Polycab / RPG / KEI or manufacturer standards
25
-
-
... More
Supply of PVC insulated 3 core 2.5 sqmm flexible copper cable of makes Finolex / RR kable / Havells/ Polycab / RPG / KEI or manufacturer standards
25
-
-
... More
Supply of PVC insulated 4 core 2.5 sqmm flexible copper cable of makes Finolex / RR kable / Havells/ Polycab / RPG / KEI or manufacturer standards
25
-
-
... More
Supply of ISI 50 mm outer dia rigid PVC pipe of makes: sudhakar / Modi / GM / AKG / VIP / Million plast
25
-
-
... More
Supply of ISI 25 mm outer dia rigid PVC pipe of makes: sudhakar / Modi / GM / AKG / VIP / Million plast
10
-
-
... More
Supply of 50mm PVC flexible pipe
Make: Precision or equivalent
10
-
-
... More
Cutting holes upto size 2.5 inches dia in wall including making good the same.
10
-
-
... More
Removing of existing Air Conditoner without damaging exisiting copper pipe
6
-
-
... More
Instrumentation :Supply and fixing of 1"PVC conduit along with accessories in surface ,including cutting of wall and making good same in case of receesed conduit as required make : SUDHAKAR with 1.5 mm wall thickness
220
-
-
... More
Supply and drwaing of 2 pair ,0.5 mm2 PVC insulated copper conductor ,unarmoured telephone cable in the existing surface PVC conduit as required Make of Cable: FINOLEX/DELTON
300
-
-
... More
Digging and laying of 20pair jelly fixed armoured cable.
50
-
-
... More
Supply and fixing of of RJ11 Telephone outlets with suitable back box and front plate : Make: Legrand with two outlets
15
-
-
... More
Supply and fixing of Junction Boxex with khrones (I.T.I Certified) 50 pair
1
-
-
... More
12V-26AH SMF Batteries with 2 years warranty including inter connecting cables(UNYNIViN U-12 Size)
20
-
-
... More
Safety Items :Addressable Fire (Smoke & Heat Detection) Alarm System Including MCP (Manual Call Point) Addressable fire alarm control panel (FACP) with Auto dialling (including RS485, GSM and Ethernet): Panel: Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 196 devices (including detectors) and minimum 98 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories. The panel shall be compatible for all types of other units (provision may be provided to IBMS system with open protocol BACnet/ Modbus) over IP complete as per specifications.
The Two (2) Analogue Loop control panel with one (1) loop card and all accessories like batteries etc, operate as stand alone or net work with the system and also with other series of panels minimum up to 16 loops and shall have the extending facility with similar type or higher capacity or mix and match of different variants up to minimum of 16 loop networked systems/panels. It shall have liquid crystal display with backlight illumination, facility for configuration by key pad and PC, and the RS-485 port for repeater connection, networking with minimum 16 loops, relay for fire, fault and auxiliary, reliable low battery indicator, and on board diagnostic, and also meet the requirements of EN54 part 2 and 4 in addition to LPCB approval. The supply of panel board with Net work Card, USB isolated upload/down load lead, Batteries (appropriate and sufficient capacity), Auto dialling facility with RS 485 card, GSM auto dialler (with power supply), Ethernet module, appropriate base etc and other appropriate, relevant and required items/devises and compatible with the total system as complete as required. Make: Morlay / Notifier /Honeywell/Edwards or equivalent as directed by engineer incharge
Operation specifications: Panel Board Operation: 230V, 50-Hz AC (+15% /- 15% Tolerance), Max PSU Rating:4.2A (2.5A for control panel, and loop supply, 1.7A charger current), Sounder Rating: 1A, Auxiliary Output : 24Vdc / 250 mA, Loop Load: 460 mA, Ambient Temperature: 00C to 400C, Humidity: 85% non condensing, Batteries: 2X12V - 38 AH(outside)/ or 2X12V - 12 AH(inside), Ingress Protection: IP30, Cable Entry (Minimum): 14X20mm Knock-outs at the top and 2X20mm knock-outs at the bottom, Housing Material: Shall Comply BS. Charger Specifications: Appropriate Preferably Inbuilt and shall supply all other required and compatible spares with the devise and compatible with the total system.
1
-
-
... More
Multi Sensor Detectors(Smoke and Heat): The Supply, Installation, Testing and Commissioning (SITC) of photo-thermal multi sensor has to utilise the thermal assistance to the core photoelectric smoke detector shall give enhanced false alarm immunity and faster response to a wide range of incipient fires. The plug in unit combines two separate sensing elements that are managed by embedded software to act as a single unit, to have the provision to change the modes in to smoke or Heat or Both whenever required. It has to confirm to EN 54-5. The operating voltage 15 to 32 Vdc and color shall be Ivory. The design features of optical chamber shall to facilitate genuine and fast response and the protocol and smoothing filter to suppress false alarms including analogue addressable communications, dual integrated LED for 360° visibility, has to conforms to EN54-7 and approval from LPCB preferably environment friendly and to meet the WEEE and RoHS legislative requirements. It shall supply all other required and compatible spares with the devise and also compatible with the total system as complete with base as required.
Make: Morlay / Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
63
-
-
... More
Heat Detector: The Supply, Installation, Testing and Commissioning (SITC) of detectors, shall be designed to work on fixed temperature analogue addressable sensors employing low mass thermistor and microprocessor technology for fast response and linear temperatures upto 780C (class BS). The features are like the protocol of the detector shall do the smooth filter to suppress false alarms, the range of thermal sensor to be at 78°C, preferably in-built isolator, analogue addressable communications, dual integrated LED for 360° or better visibility, and has to conforms to EN54-5 and approval from LPCB, preferably environment friendly and shall meet the WEEE & RoHS legislative requirements. It shall supply all other required and compatible spares with the devise and also compatible with the total system as complete with base as required.
Make: Morlay / Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
1
-
-
... More
Manual Call Point (MCP): The Supply, Installation, Testing and Commissioning (SITC) of MCP shall design like unique Plug and play, resettable, unbreakable, flexible, element, analogue addressable communications, semi-flush and surface mount, integrated led, integral loop isolation and has to confirm to EN 54-11 and approval from LPCB. It shall be operated on 15 to 30 Vdc and red color. It shall supply all other required and compatible spares with the devise and also compatible with the total system as complete with base as required.
Make: Morlay / Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
2
-
-
... More
Wall Mounted Sounder and Strobe: The Supply, Installation, Testing and Commissioning (SITC) of sounder strobe designed based on piezoelectric transducer with high output LED array technology, highly efficient, minimum current consumption, permit/enabling the maximum number of devises to be allowed to installed on loop, without compromising the sound and light out puts levels. It shall have 32 built-in tones, lower power requirements, IP65 rating, built-in isolator, anti-tamper feature and approvals from CPO, LPCB etc. It shall supply all other required and compatible spares with the devise and also compatible with the total system as complete with base as required.
Make: Morlay / Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
4
-
-
... More
Monitor Module: The Supply, Installation, Testing and Commissioning (SITC) of monitor module shall design like to accommodate intelligent fire alarm control panels to provide single/appropriate input circuit from external devices, each input shall continuously monitor for normal, open and alarm conditions. The changes in the status have to communicate the panel board to take appropriate action. It shall have DIN rail mounting option, rotary decade address switch, analogue addressable communications, preferably tri color LED status, plug-in connectors, built-in short circuit isolator and approved from LPCB, GEA GEI etc. It shall supply all other required and compatible spares with the devise and also compatible with the total system as complete with base as required.
Make: Morlay / Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
1
-
-
... More
Fault Isolator: The Supply, Installation, Testing and Commissioning (SITC) of devise shall be spaced between groups of devices on a communication line/cable to protect the line from short circuit fault occurrences. It has to operate automatically if falls the below a fixed threshold voltage. The DIN rail mounting facility, rotary decade address switch, analogue addressable communications, preferably tri-color LED status but plug-in connectors facility and approval from LPCB, GEA GEI,CEA etc. It shall supply all other required and compatible spares with the devise and also compatible with the total system as complete with base as required.
Make: Morlay / Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
3
-
-
... More
Response Indicator: The Supply, Installation, Testing and Commissioning (SITC) of response indicator shall compatible and in line with system and preferably two/three color LED indicator of the status of the appropriate detector condition i.e. normal, fault, short etc by different colours. It shall supply all other required and compatible spares with the devise and also compatible with the total system as complete with base as required.
Make: Morlay / Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
22
-
-
... More
Control Relay Module: The Supply, Installation, Testing and Commissioning (SITC) of control module with appropriate power supply (24V – 5AH) in addition to power supply from nearest power point as per standard and supply all other required and compatible items with the devise and also compatible with the total system as complete as required.
Make: Morlay/Notifier/Honeywell/Edwards or equivalent as directed by engineer incharge
1
-
-
... More
Cabling: Supplying & laying of 2x1.5 sqmm ISI marked fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
Make: Finolex/ Polycab or as directed by engineer incharge
600
-
-
... More
Cabling: Supplying & laying of 4x1.5 sqmm ISI marked fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
Make: Finolex/ Polycab or as directed by engineer incharge
15
-
-
... More
Computer Items:HPE FlexNetwork 5130-24G-2SFP+-2XGT EI Switch 24 RJ-45 autosensing 10/100/1000 ports Duplex: 10BASE-T/ 100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ fixed 1000/10000 SFP+ ports 2 RJ-45 1/10GBASE-T ports, 1 RJ-45 Serial Console Port
1000 Mb Latency : 5 µs, 10 Gbps Latency : 3 µs
Throughput : up to 96 Mpps
Routing/Switching capacity : 128 Gbps
Routing table size : 512 entries (IPv4),
MAC address table size : 256 entries (IPv6) 16384 entries 1GB SD RAM
Packet buffer size: 1.5 MB
512 MB Flash
19” Rack mountable brackets
Indian AC power card 230V, 5AMP
Console Cable.
Mounting, installation and testing etc.
1
-
-
... More
Aruba 2x2 Wi-Fi Access point, Aruba IAP-207 dual radio integrated antenna AP
(Airwave Software based controller software managed)
802.11ac – 5GHz MIMO – 867 Mbps & 2.4GHz 2.2 MIMO - 400Mbps radios with two Omni-directional dual band antennas.
One 1000-T Ethernet interface (RJ45)
Auto-sensing link speed
Visual indicators for system and radio status & reset button
Direct DC power and PoE Support Flat surface ceiling mount kit, mounting clips
Power card (Indian), Mounting and installation & testing, etc
2
-
-
... More
PD-3501G-AC, 15.4W 802.3af PoE 1000-T Ethernet Power injector for Aruba 2x2 IAP access point.
1
-
-
... More
12U Wall mounting rack supply and installation
Certification: OEM should have ISO 9001, 14001 certified. Rack should be UL listed.
Warranty: life time warranty Mounting fasteners: Hardware packet 50 No. screws. (Mounting nut bolt to be provided.)
Physical size: 12U rack, Width: 560mm, Depth: 600mm Front Door: Front side glass door, back perforated door with side panel.
Bottom: Bottom panel to be protected to enter any rats. Cable entry provision from top & bottom.
Equipment mounting angles: 19” equipment mounting angles at front. With Reducing cable channel with pvc loops Horizontal cable management: 1U cable manager channel on front 1U keyboard Shelf.
Vertical cable management: front side vertical box type channel 2 cable managers Earthling kit: earthling kit split Locking arrangement: Lock with 2 keys for both front doors Blank panel: 6 nos., 1U tool less blank panel
Fan: 360 CFM top through (90x4)
Power Supply: 1U, 6AMP, 5 socket multi pin PDU with 3-m power lead, with 15AMP top at second end.
Wall mounts: Wall mounting screws kit
1
-
-
... More
24 port, 19” fully loaded Cat-6 Jack panel with mount kit and screws
Supply and termination (Crimping)
1
-
-
... More
APC BR-1000G-IN, 01 KVA Online UPS with 30 Min backup, 02* Lithium ion batteries (Cells)
02 years of warranty
1
-
-
... More
3 feet Cat 6A UTP Patch Cord D-Link
The work area equipment cords shall, at a minimum comply with proposed ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair 100 ohm Category 6A Cabling.
Equipped with modular 8-position plugs on both ends, wired straight through with standards compliant wiring. Should have 50 micro inches of gold plating over nickel contacts. Modular cords should include slim clear anti-snag slip-on boots Mounting cords should have ETL component compliance.
20
-
-
... More
7 feet Cat 6A UTP Patch Cord, D-Link
The work area equipment cords shall, at a minimum comply with proposed ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair 100 ohm Category 6A Cabling.
Equipped with modular 8-position plugs on both ends, wired straight through with standards compliant wiring. Should have 50 micro inches of gold plating over nickel contacts. Modular cords should include slim clear anti-snag slip-on boots Mounting cords should have ETL component compliance.
20
-
-
... More
Wall cutting, grouting and concealed with 1” PVC pipe Either horizontal or vertical Openings at bends and metal I/O boxes wall mounting
(Per Mt.)
300
-
-
... More
UTP Cable pulling
(Per Mt.)
900
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements