Indian Institute Of Chemical Technology Tender

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing Brass 100mm (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in IICT Campus lead as directed by Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) For fixed portion

Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With ALUMINIUM U beading.

Providing and application of nito zinc standard primer, cost including preparation of surface as directed by engineer in charge.

Providing and application of nito bond SBR, cost including preparation of surface as directed by engineer in charge.

Providing and application of nito bond EP, cost including preparation of surface as directed by engineer in charge.

Supplying and fixing the following fitting to the laboratories furniture and fume hoods cost including removing of existing damged fittings.

Fume hood sash belt SIZE: 10m width T-5 Pitch Make : Bando

SS D Handle Size: 126mm make: DECO WELL

Laboratory work bench drawer locks as suitable to the existing provision. 22mm Model Hettech/Ebco or Equivalent approved make.

Telescopic channels 500mm long and capacity 45kg as suitable to the existing provision. Model Hettech/Ebco or Equivalent approved make

Zero crank hinges 70mm as suitable to the existing provision. Model Hettech/Ebco or Equivalent approved make

Fume hood base cabinet wheels size 70mm dia approved make

Electrical trunk box GI construction duly powder coated with electrical sockets -legrand or equivalent make

Providing and applying multi color epoxy spray painting to the laboratory furnitures, fume hoods and doors

a) Wall bench (with sink unit) size: 5000Lx750DX750H mm

b) Wall bench of size: 2910Lx750DX750 H mm

c)Wall bench (with sink unit) size: 3510Lx750DX900H mm

d) Fumehood with closing pannels size:1500Lx915DX2950H mm

e) Island bench size:3510Lx1500DX900H mm

f) Chemical storage rack size:600Lx450DX1800H mm

g) Aluminum doors size: 1.2x2.35

h) Spot extractors brackets.

Note: Before quoting the rates contractor has to visit the site during working hours