Indian Institute Of Chemical Technology Tender

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.

3x2.5 sq.mm

3 x 4 sq.mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular indicator switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (i) Group C

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories on Metal Angular frames, pipes with necessary weldings to fix pvc pipe/ surface/recess cutting the wall and making good the same in case of recessed conduit as required.(Make:Sudhakar) 25mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm)

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required.

5/6 A switch

15/16A One way Switch

3 pin 5/6 A socket outlet

6pin 15A/16A power socket outlet

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required.

Single pole

Triple pole

Triple pole & Neutral

Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required. Make: Legrand

S/F 'C' series MCB: Supplying and fixing of following rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Make:Legrand/L&T/Scheinder/ABB

3 pole 63A MCB

4 pole 63A MCB

Supply of false ceiling recess mounted 600mmx600mm LED panel luminaire complete set including driver etc as directed by Engineer incharge. Specifications:Operating voltage 140v-270v AC input 50Hz, 26-30watts, 3000-3500 lumens, 5700K-6500K, 2x2 Panel, recess mounted suitable for Armstrong/Grid ceiling/POP, CRCA powder coated white after phosphochromate treatment, 595x595x70mm, opal polystyrene diffuser sheet with special glare cut film, Compliance to EN-12464-1: Luminaire luminance 3000cd/m2 between 65-90 deg elevation angle, High efficiency long life LED package in integral module with System lumen efficacy of 110 lm/W, Powered by an independent Isolated, SELV Output electronics LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test, Supports 0-10V, DALI and POE, 3400Lm, CRI80, 5700K-6500K, THD10%, PF0.95, IP20, IK03, Life class of 50,000 hrs @ L70, Operating Temperature: -10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency: 50-60 Hz, Internal Surge Protection: 2.5 KV; Protection: Reverse Polarity, Open & Short Circuit, EMI/EMC compliance, driver safety requirement standards: IS15885-2-13, test report to be submitted; photo biological safety norms: IS16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source, driver and fixture to be BIS certified. Make:philips/ Havells/ Crompton/ Trilux Model: RC380B LED36S-6500 G6 L60W60 PSU OD S1 Philips make.

Installation, Testing & Commissioning of 600mmx600mm recess mounted LED luminaires with necessary chain supports in the existing false ceiling, connections etc; as directed by Engineer incharge.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (i) 8 way (4 + 24), Double door

Supply of 4CX25 sq.mm Al. Conductor armoured XLPE, PVC sheathed 1.1kV grade cable.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (i) Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass /PVC compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 4 X 25 sq. mm (28mm)

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

ITC ceiling fan: Installation, testing and commissioning of ceiling fan, including down rods of length(upto 3 feet) with all mechanical supports if necessary, connections, paintings etc; should be done as directed by Engineer incharge.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Disconnecting and removing of old DB/ Light fittings, Ceiling fans and all electrical Gadgets: Disconnecting and removing of existing light fittings of all types / Ceiling Fans/ wall mount brackets and Existing Switch boards, MCB Enclosure boxes, Old DB of all types including existing wiring and transporting all the dismantled materials with out any damage from the site to departmental stores/ debries yard as directed by the Engineer in charge.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (i) 12 way , Double door

P/F 4mm copper earth wire with conduit/cable: Providing and fixing 4.00mm dia. copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/cable as required.