Indian Institute Of Chemical Technology Tender

(iii) 3x6 sq.mm

(iv) 5x4sq.mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular indicator switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (i) Group C

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories on Metal Angular frames, pipes with necessary weldings to fix pvc pipe/ surface/recess cutting the wall and making good the same in case of recessed conduit as required.(Make:Sudhakar) (i) 25mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (i) 12 Module (200mmX150mm)

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required.

(i) 5/6 A switch

(ii) 15/16A Switch

(iii) 3 pin 5/6 A socket outlet

(vi) 6 pin 15A/16A power socket outlet

Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required. Make: Legrand

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED Fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall/ MS Angular frames, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required and as directed by Engineer Incharge.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supply of 28watts, 1200mm BLDC ceiling fan sweep: 1200mm (48"), Rated Voltage: 230V, Frequency:48-52 Hz, BEE Rating: 5 Star Operating Voltage:140-285v single phase AC, Power factor:0.99, Air Delivery:235 CMM Rated power: 28-30watts, Motor Speed: 340 RPM with speed control, Bearing: Double Ball Bearing, Down rod size with rubber bushes: 300mm, Operating temperature within 2 degree of ambient, warranty: 3 yrs on site, Speed control: Remote/Regulator control, Report: The firm has to submit type test report from government accredited test labs like CPRI and as directed by Incharge Elecrical. Model:EFFICIO Sweep:1200mm (48") colour:White Make: Atomberg/Crompton / Usha/Orient

Supply of 125A ,36 KA, 4 Pole MCCB including Sheet Steel MCCB Enclosure with necessary looping from Busbar of PCC panel as directed by Engineer incharge. Make:Legrand/L&T

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

(i) Upto 35 sq. mm (clamped with 1mm thick saddle)

(ii) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

S/F 'C' series MCB: Supplying and fixing of following rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Make:Legrand/L&T/Scheinder/ABB

(i) 40 A, SP, MCB

(ii) 40 A, DP, MCB

(iii) 3 pole 63A MCB

(iv) 4 pole 63A MCB

Supply of poly carbonate 1x18 watts, 4feet, LED Tube light set, along with 1xTLED fixture, LED Tube-1no,complete with all accessories as directed by Incharge Electrical. Cat.no.TMC501P 1xTLED 20W-14# LED tube 18watts,865,T8 Make:Philips

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required.

(i) Single pole

(ii) Triple Pole

(iii) Triple Pole & Neutral

Supplying and fixing of following ways surface/ recess mounting, Vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting 125 A, MCCB as incomer and MCBs as outgoing. Specifications: 8 way , Double door VTPNDB with powder coated bottom and top cable Entry boxes including following switch gear . 1)125A 3pole 36KA MCCB as incomer-1no Make:L&T/Legrand

Supply and fixing of 50w smart LED outdoor fixture completely with all accessories as directed by Engineer incharge. cat.no.BVP161 LED43/CW 50W 220-240 V WB GREY IN Make:Philips

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. on MS angular frames With MS clamps and necessary welding as required and as directed by Engineer Incharge.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED Fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall/ MS Angular frames, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required and as directed by Engineer Incharge.

SITC of PCC panel of rating 250 A, 415 V, Three Phase and Neutral, 50 Hz, Indoor, Single door, Wall Mounted, Fixed type, Compartmentalised type, CRCA Sheet steel of thickness not less than 2 mm for load bearing members and 1.6 mm thick for Doors of LT panels and 2 mm for Gland plate, suitable Tinned Copper Busbar of 250 A, neutral bus bar of 250A capacity, earth bar, din bar, interconnections with adequate size of copper strip extended upto the cable alley side, powder coated painting with 7tank process of approved color, including earthing etc., MS angle frame pedestal to suit the PCC panel and covered with duly enamyl painted G.I. sheets (screw & nut fixed) for three sides of the pedestal, IP42, Dust and Vermin proof, Top and Bottom provision by Gland plates for Incoming and outgoing cables etc. and making good of floor/base, the general construction shall conform to IS8623:93 with cable and anodized compartments labelling as required by the Engineer incharge and mounting of the following components as per the requirements. The drawing of PCC Panel approval has to be taken before fabrication, PCC panel on site inspection will be done during fabrication and testing by Engineer Incharge, once the final inspection and testing is done the PCC panel can be transported to site. A. INCOMER: Requirements: (i) 200 A, 4P, 36 kA, MCCB with Thermal-magnetic release, O/C & S/C protection - 01 No. (ii) MCCB Mounting Accessories (Spreaders, Spacers etc.) - 01 set. B. OUTGOINGS: 1) 125 A, FP, MCCB Feeder - 02 set Requirements: (i) 125 A, 4P, 25 kA, MCCB with Thermal-Magnetic release, O/C & S/C protection - 01 No. (ii) MCCB Mounting Accessories (Spreaders, Spacers etc.)-01set. 2) 80 A, FP, 'C' Curve MCB - 04 No.

Supply of 3.5C x 35 sq.mm Al. Conductor armoured XLPE, PVC sheathed 1.1kV grade cable.

Supply of 3.5C x 95 sq.mm Al. Conductor armoured XLPE, PVC sheathed 1.1kV grade cable.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

(i) 3.5C X 35 sq. mm (32mm)

(ii) 3.5C X 95 sq. mm (45mm)

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Extension of Existing PCC panel of size 1.15mx1.26mx0.45m on top side of rating 300A, 415 V, Three Phase and Neutral, 50 Hz, Indoor, Single door, Floor Mounted, Fixed type, Compartmentalised type, CRCA Sheet steel of thickness not less than 2 mm for load bearing members and 1.6 mm thick for Doors of LT panels and 2 mm for Gland plate, suitable Tinned Copper Busbar of 300 A, neutral bus bar of same capacity, earth bar, din bar, interconnections with adequate size of copper strip extended upto the cable alley side, powder coated painting with 7tank process of approved color, including earthing etc., IP42, Dust and Vermin proof, maximum operable height of Panel must not be more than 1.7 metre and maximum vertical height of panel must not exceed 2.5 metre, Top provision by Gland plates for Incoming and outgoing cables etc. and making good of floor/base, the general construction shall conform to IS8623:93 with cable and anodized compartments labelling as required by the Engineer incharge and mounting of the following components as per the requirements. The drawing of PCC Panel approval has to be taken before fabrication, PCC panel on site inspection will be done during fabrication and testing by Engineer Incharge, once the final inspection and testing is done the PCC panel can be transported to site. B. OUTGOINGS: 1) 200 A, FP, MCCB Feeder - 01 set Requirements: (i) 200 A, 4P, 36 kA, MCCB with Thermal-Magnetic release, O/C & S/C protection - 01 No. (ii) MCCB Mounting Accessories (Spreaders, Spacers etc.)-01set. 2) 125 A, FP, MCCB Feeder - 01 set Requirements: (i) 125 A, 4P, 25 kA, MCCB with Thermal-Magnetic release, O/C & S/C protection - 01 No. (ii) MCCB Mounting Accessories (Spreaders, Spacers etc.)-01set. 3) 63 A, FP, 'C' Curve MCB - 04 No.

Labelling and Lettering of PDB / LDB of required font to suit the equipment with required coloured paint with elegant finishing as required by the department

Labelling and Lettering of Switchboard/Power board of required font to suit the equipment with required coloured paint with elegant finishing as required by the department

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (i) 8 way (4 + 24), Double door

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as directed by Engineer incharge.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Fixing of 125A ,36 KA, 4 Pole MCCB including Sheet Steel MCCB Enclosure with necessary looping from Busbar of PCC panel as directed by Engineer incharge. Make:Legrand/L&T