Indian Institute Of Chemical Technology Tender

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc.,complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

Providing and applying crack seal of approved make like Dr.Fixit or its equvalent make and it is apply into wall cracks as directed by the Engineer-In charge and including all leads and lifts as directed by Engineer-In-Charge.

Providing and fixing of 19.0mm thick plywood of approved make like greenply/century or its equivalent approved make and cut into required sizes for flooring as directed by Engineer-In Charge.

Providing and fixing PVC floor tiles of approved make of required shade/pattern and including adhesive for fixing etc., complete as directed by Engineer-In-Charge.

Removing, repairing and refixing of Aluminium partitions/ doors including replacement with necessary hardware like neoprene gaskets, ss screws for fixing etc., complete as directed by Engineer-In-Charge.

Providing and fixing of Non reflective Sun control film of GARWARE - G5 make and including all leads and lifts as directed by Engineer-In-Charge.

Supplying of 6A, 3 pin, 230V, Switch Socket Combined with Four fixing holes as required and as directed by Engineer Incharge. Model: 6A, 3 Pin S.S. Comb. Delux with Four Fixing Holes, Anchor Make.

Fixing of 6A, Switch Socket Combined on the existing switch box/ cover including connections etc. As required and as directed by Engineer Incharge.