Indian Institute Of Chemical Technology Tender

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material out side the campus as per direction of Engineer-in-charge. In cement mortar

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete, as per directions and approval of Engineer In- charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: -This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Supplying, installation, testing & Commissioning of 6 passenger (408 kg) lifts having contract speed of 1 MPS/ 1.5 MPS (Refer para 8 of specifications for selection of speed) serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Location of Lifts: CSIR-IICT (i) Speed: 1MPS/1.5 MPS (ii) Floors: G + 2 (iii) Travel 1 / 1.5 Meters (approx) (iv) Stops & Opening - THree (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device complete with dry maintenance free batteries as required. (vii) Operation: Microprocessor based single automatic push button/ simplex selective collective/ duplex collective selective with / without attendant. (viii) Power – 415 V,3 phase,50 Hz, 4 wires system (ix) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (moon rock finish) (b)Landing doors: Stainless steel AISI441 hair line. Note: In coastal areas stainless steel scratch proof (moon rock finish) landing doors shall be permitted. (x) A hand rail not less than 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car (xi) Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator complete, as per the direction of Engineer-In-Charge.

Point wiring in PVC conduit with modular type switch: Wiring for light point/fan point/exhaust fan point/call bell pont with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FR PVC insulated copper conductor single core cable etc., as required. and as per direction of engineer in charge.\ Group A

Wiring for twin control light point with 1.5 sq.mm FR PVCinsulated copper conductor single core cable in surface /recessed medium classPVCconduit, 2way modular switch, modular plate,suitable GI box and earthing the point with 1.5sq.mm. FR PVC insulated copper conductor single core cable etcas required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

(i) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(ii) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

(iii) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required

(i)5/6A One way Switch

(ii)15/16A One way Switch

(iii)3pin 5/6A socket outlet

(iv)6pin 16A/6A power socket outlet

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required

(i) 3 module

(ii) 4 module

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 12 way, Double door

S/F 'C' series MCB: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:Legrand

(i) Single pole

(ii)Triple pole and neutral

(iii) Triple pole

Supplying and fixing DP sheet steel enclosure on surface/ recessalong with 25/32amps 240 volts "C" curve DP MCB completewith connections, testing and commissioning etc. as required

Supplying and fixing TP sheet steel enclosure on surface/ recessalong with 16/25/32amps 415 volts "C" curve TP MCB completewith connections, testing and commissioning etc. as required.

SITC Bulk Head Luminaires with Clear or opal acrylic Cover including 1xGLS 60W

Supply of 1 x 20W LED Tube fixture with tube and complete set consisting all accessories etc., as required.

ITC fluorescent fitting directly on surface : Installation, testing and commissioning of prewired, fluorescent fittings/ compact fluorescent fitting of all types, complete with all accessories and tube etc., directly on surface/wall including connection with 1.5sq.mm FR pvc insulated, copper conductor, single core cable and earthing etc., as required.

Earthing with copper earth plate 600 mm X 600mm X 3 mm thickincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7metre long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with4.00 mm dia copper wire in 15 mm dia G.I. pipe from earthelectrode including connection with copper thimble excavationand re-filling as required.