Indian Institute Of Chemical Technology Tender

Wall painting with anti fungal paint premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats of interior primer wherever required to achieve even shade and colour.Two coats as directed by Engineer incharge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 20 kg/sqm)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete,

Labour charges for removing, repairing and re-fixing of existing aluminium doors/shutters including floor springs and providing hardware like pivots s.s.screws,PVC / Neoprene gasket etc., complete as directed by Engineer-In-Charge.

Providing and fixing of wall table of Size: 2450 L x 900 W x 900 H IN MM STANDARD : As per the SEFA standard Material of construction : 20 gauge electro galvanized sheet with epoxy polyster powder coating with FRP bisphenol "A "FUMARATE resin rinsed Under bench modular: It consist of continuous modular with 1 no of foot rest and bottom cupboard will be provided. Bottom cupboard will have one no.Inner horizontal partitions with single door Electrical arrangement: 2no's 6 modular plate electrical boxes will be provided. Top: 18mm (+or-1mm) thick black granite will be provided.

Providing and fixing of Wall storage cubboard (without door) Size: 750 L x 750 W x 750 H IN MM Material of construction : 20 gauge electro galvanized sheet with epoxy polyster powder coating with FRP bisphenol "A "FUMARATE resin rinsed It will have 1no. of horizontal partitions will be provided.

Providing of Revolving stool with back rest: The frame structure of the stool made out of heavy guage MS round pipe and finished in IVORY colour epoxy polyster power coat backed at 200º C The top of the stool and back rest will be CUSHION TOP seat dia 380mm height 450 to 600 mm and pipes 19mm dia clour as directed by the Scientist Incharge Note: See image of revoling stool with back rest in annexure-i enclosed in tender schedule.

Disconnecting and removing of Switch boards/ Light fittings, Ceiling fans and all electrical Gadgets in Sitting Room of area 180 sft: Disconnecting and removing of existing light fittings of all types/ Ceiling Fans/ wall mount brackets and Existing Switch boards, MCB Enclosure boxes, Old DB of all types including existing wiring and transporting all the dismantled materials with out any damage from the site to departmental stores/ debries yard as directed by the Engineer in charge.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (i) 12 way , Double door

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (i) Group C

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.

3x2.5 sq.mm

3x4 sq.mm

5x4Sq.mm

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories on Metal Angular frames, pipes with necessary weldings to fix pvc pipe/ surface/recess cutting the wall and making good the same in case of recessed conduit as required.(Make:Sudhakar) (i) 25mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module (200mmX75mm)

12 Module (200mmX150mm)

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supply of false ceiling recess mounted 600mmx600mm LED panel luminaire complete set including driver etc as directed by Engineer incharge. Specifications:Operating voltage 140v-270v AC input 50Hz, 26-30watts, 3000-3500 lumens, 5700K-6500K, 2x2 Panel, recess mounted suitable for Armstrong/Grid ceiling/POP, UGR19, CRCA powder coated white after phosphochromate treatment, 595x595x70mm, opal polystyrene diffuser sheet with special glare cut film, Compliance to EN-12464-1: Luminaire luminance 3000cd/m2 between 65-90 deg elevation angle, High efficiency long life LED package in integral module with System lumen efficacy of 110 lm/W, Powered by an independent Isolated, SELV Output electronics LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test, Supports 0-10V, DALI and POE, 3400Lm, CRI80, 5700K-6500K, THD10%, PF0.95, IP20, IK03, Life class of 50,000 hrs @ L70, Operating Temperature: -10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency: 50-60 Hz, Internal Surge Protection: 2.5 KV; Protection: Reverse Polarity, Open & Short Circuit, EMI/EMC compliance, driver safety requirement standards: IS15885-2-13, test report to be submitted; photo biological safety norms: IS16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source, driver and fixture to be BIS certified. Make:philips/ Havells/ Crompton/ Trilux Model: RC380B LED36S-6500 G6 L60W60 PSU OD S1 Philips make.

Installation, Testing & Commissioning of 600mmx600mm recess mounted LED luminaires with necessary chain supports in the existing false ceiling, connections etc; as directed by Engineer incharge.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required.

Single pole

Triple pole

Triple pole & Neutral

Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required. Make: Legrand

S/F 'C' series MCB: Supplying and fixing of following rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Make:Legrand/L&T/Scheinder/ABB

3 pole 63A MCB

4 pole 63A MCB

Supply of 36 W, 1200 mm, UV Light Tube with 1XTL 1200 mm Frame/fixture with all accessories and as directed by Engineer In-charge. Make: Philips

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED Fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required and as directed by Engineer incharge.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supply of 4CX25 sq.mm Al. Conductor armoured XLPE, PVC sheathed 1.1kV grade cable.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (i) Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass /PVC compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 4 X 16 sq. mm (28mm)

P/F 4mm copper earth wire with conduit/cable: Providing and fixing 4.00mm dia. copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.

Supply and transportation of 5 star inverter model, 1.5 TR high wall Split AC unit capable of delivering 17,500 BTU/hr to 18,000 BTU/hr with high wall mounted single split 100% copper consisting of indoor and outdoor condensing unit, hermetically sealed compressor suitable for operation on 230V, 50 Hz, single phase AC supply capable of performing cooling, dehumidifying, air circulation and filtering with cooling and condensing units with 3.0 mts of copper pipe installation kit and 4mts of 4 core copper flexible cord and cordless remote control with eco friendly refrigerant. say R-410A/R-32. Complete as per the directions of Engineer in-charge Makes: Carrier, Blue star, Voltas, LG or equavalent directed by engineer in-charge.

Providing 2 runs of copper tubes for suction and liquid between indoor and outdoor unit for split airconditioner including foaming etc, complete. Size: 5/8”x 1/4" or 1/2" x 1/4" or as per manufacturer standards as directed by engineer in-charge.

Supply and installation of 4 KVA stabiliser including standard test reports Input Working Range: 150V-280V, Output Working Range: 200V - 240V ± 5%, Automatic Low & High Cut Off, Initial Time Delay, Auto Start, Included. Complete as per the directions of Engineer in-charge Features : Full Protection, An Ergonomic Wall Mounting Design for Easy Installation as directed by the Engineering incharge Warranty Description : Five year Warranty or as offered by the manufacturer Makes: V-guard /Real guard/Unit stab/ITL/IFB or equivalent

Installation of Split Air Conditioner. Complete as per the directions of Engineer in-charge

Supply, fabrication of one set MS bracket suitable for fixing outdoor unit of Split ACs

Removing of existing Split Air Conditioner with out damaging to the copper pipe. Complete as per the directions of Engineer in-charge

Supply of PVC insulated 3 core 2.5 sqmm flexible copper cable of makes Finolex / RR kable / Hevells/ Polycab / RPG / KEI or manufacturer standards

Supply of PVC insulated 4 core 2.5 sqmm flexible copper cable of makes Finolex / RR kable / Hevells/ Polycab / RPG / KEI or manufacturer standards

Supply of 50mm PVC flexible pipe Make: Precision or equavalent

Making hole in stone masonary/RCC wall/RCC slab with core cutter for accomodating refrigerant pipe,darin pipe,cables etc of 50 mm dia per running 9 inch. Complete as per the directions of Engineer in-charge length,Rate per inch = 93.85/- (9 inch = 844.64/-)

Supply, transportation, installation, testing & commissioning of an automatic air curtain suitable for mounting above a 4 feet wide door., The air curtain shall activate automatically using a door limit switch. Dimensions : suitable for a 4 feet wide door. Operation : Enable air curtain upon door opening and disables upon closing, should work on 230 V single phase & concealed wiring.Complete as per the directions of Engineer in-charge Make : Dolphy, cronax or as directed by engineer in-charge.