Indian Institute Of Chemical Technology Tender

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With Aluminium U beading.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm

Providing and applying white cement based putty of Two coats, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with one coat of primer.

Removing the existing peeled off/ areas of damaged paint from the walls and ceilings wherever it is required and as directed and providing and applying one coat of interior cement primer touchups on damaged areas as per the directions and providing and applying one or more quotes of plastic emulsion paint of approved brand and manufacture to give an even shade on old work with all leads and lifts etc., complete.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Supplying and fixing 10 Gauge weld mesh of size 100mm x 100 mm for shed enclosure as directed by Engineer-In-Charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. 25 mm nominal dia Pipes

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Labour charges for making holes with using core cutting of 4'' thick with 3'0'' long stone masonry walls of upto average thickness as per site conditions, as directed by Engineer-In-Charge.

Providing and fixing 15mm dia. 3way heavy swan neck laboratory water tap of approved quality vijaya make CAT No : 891

Providing, fixing and jointing/welding with Polypropylene material 110mm outer diameter Polypropylene pipes of approved make with necessary G.I. Clamps and base etc., with all leads and lifts complete as directed by Engineer-in-charge.

Providing and fixing 110mm outer diameter Polypropylene plain bends of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge.

Providing and fixing 110mm outer diameter Polypropylene plain Tees of approved quality including jointing with all leads & lifts complete as directed by Engineer-in-Charge.

Providing and fixing 110mm outer diameter Polypropylene flanges of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge.

Labour Charges for Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Note: Only steel is supplied by department.

Supply, installation, WALL TABLE (Instrument table) as per the SEFA Standard of size 3330L X 750W X 900H mm. 20 gauge electro galvanized sheet with epoxy polyster powder coating. It consist of continous modular with top drawer and bottom cupboard. Bottom cupboard will have one No innner horizontal partitions. All the drawer will have locking arrangements. 4 No.s of reagent reack shall be provided. 4 No's of 15/5 Amps 3 pin Electrical socket cum switch shall be provided. 2 No.s of PP/PORCELAIN SINK (560X355) MM with 3-way water tap shall be provided. 18mm thick 'Z' black granite top shall be provided (Ivory/Blue) and as directed by Engineer-In-Charge.

Supply, installation, WALL TABLE (Instrument table) as per the SEFA Standard of size 3330L X 750W X 900H mm 20 gauge electro galvanized sheet with epoxy polyster powder coating. It consist of alternative modular with top drawer and bottom cupboard. Bottom cupboard will have one No innner horizontal partitions. All the drawer will have locking arrangements. 18mm thick 'Z' black granite top shall be provided (Ivory/Blue) and as directed by Engineer-In-Charge.

Supply, installation, Grand Deluxe Fumehood of 1200Lx900Wx2400H in mm, bed size 1050mmx750mm of ASHARE 110: 1995 tested 18 gauge electro galvanized sheet with epoxy polyster powder coating. It consist of Single, vertical sliding, concealed type 5mm thick glass door balanced with counter weights and wire rope etc., The Fumehood is powered by 1 HP 1380 RPM TEFC 3 PH Kirloskar/ Siemens make motor. (in-Built). It consists: Ducting-Rigid ducting of FRP OF 200MM dia. 10 feet 4 mm Thick rigid FRP pipe will provide with suitable rain hood. Baffle: A stable, non -adjustable with a single slot on the Back baffle to aid in distributing the flow of air in to and through the hood. The baffle shall be spaced out from the back linear and shall be removable for cleaning. Impeller: Dynamically balanced FRP impeller Baffled by: 3 mm thick FRP Sheet Air regulator baffle. Centrifugal blower: Silent high efficiency remote blower Consisting of continuous rating motor and chemical resistant Impeller. The blower is designed to give a face Velocity at safe working height as per the International safe velocity norms(ANSI).The blower Body is FRP UV treated high density and chemical (Corrosion) resistant and is mounted on a metallic Stand. Casing: 6 MM thick FRP Bisphenol A' fumerate Resin Noise level: 70db Coupling: Direct C'' Frame Construction : 40X4Omm FRAME with Epoxy polyester powder coating will be provided. Bottom arrangement: 18 gauge electro galvanized sheet with epoxy polyester powder coating. Top: 18mm(+1mm) thick ; 'Z' BLACK GRANITE TOP will be provided. Suction expected: 800-1000 CFM Colour: Ivory/ Blue Amenities included: Lighting 2 Nos LED Light will be provided. Electrical arrangements: The hood super structure shall be fully wired. It also has 2 No's 15/5 AMPS, 3 PIN SOCKET CUM SWITCHES, indicator lamp, starter will be provided. Cable entering port : For easy access of cable of from fume hood to Electrical sockets. Sink & Water tap : 1 No of FRP SINK (12"X 10") with Single Way Water tap shall be provided and as directed by Engineer-In-Charge.

Supply, installation, 'L' shape WALL TABLE (Computer Work Station) (7056+1600)L X 600W X750H mm, BWP PVC Grade with plastic lamination. The total unit made out of 18mm THICK BWP PVC. The back side will be removable. The drawer bottom shall be 6mm PLY with PVC lamination. 5 No's Key board tray, 5 No's cable Manager and 5 no's CPU platform. EACH WORKING PERSON: 2 Nos 5/15 Amps, 3 pin SOCKET CUM SWITCH AND 1 No DATA POINT will be provider. 25mm (+1mm) THICK LAMINATED PLYWOOD TOP shall be provided and as directed by Engineer-In-Charge.

Supply, installation, 'L' shape WALL TABLE (Computer Work Station)(5026+1600)L X 600W X750H mm, BWP PVC Grade with plastic lamination. The total unit made out of 18mm THICK BWP PVC. The back side will be removable. The drawer bottom will be 6mm PLY with PVC lamination. 4 No's Key board tray, 4 No's cable Manager and 4 no's CPU platform. EACH WORKING PERSON: 2 Nos 5/15 Amps, 3 pin SOCKET CUM SWITCH AND 1 No DATA POINT. 25mm (+1mm) THICK LAMINATED PLYWOOD TOP shall be provided and as directed by Engineer-In-Charge.

Supply, installation, WALL TABLE (Computer Work Station) 2500L X 600W X750H mm, BWP PVC Grade with plastic lamination. The total unit made out of 18mm THICK BWP PVC. The back side will be removable. The drawer bottom will be 6mm PLY with PVC lamination. It consists of 2 No's Key board tray, 2 No's cable Manager and 2 no's CPU platform. EACH WORKING PERSON: 2 Nos 5/15 Amps, 3 pin SOCKET CUM SWITCH AND 1 No DATA POINT. 25mm (+1mm) THICK LAMINATED PLYWOOD TOP shall be provided and as directed by Engineer-In-Charge.

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.

1 x 1.5 sq. mm

2 x 1.5 sq. mm

3x2.5 sq.mm

3x4 sq.mm

5x4sq.mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (i) Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group -C

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories on Metal Angular frames, pipes with necessary weldings to fix pvc pipe/ surface/recess cutting the wall and making good the same in case of recessed conduit as required.(Make:Sudhakar) (i) 25mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module (200mmX75mm)

12 Module (200mmX150mm)

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required.

5/6 A switch

15/16A Switch

3 pin 5/6 A socket outlet

6 pin 15A/16A power socket outlet

Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required. Make: Legrand

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supply of 28watts, 1200mm BLDC ceiling fan sweep: 1200mm (48"), Rated Voltage: 230V, Frequency:48-52 Hz, BEE Rating: 5 Star Operating Voltage:140-285v single phase AC, Power factor:0.99, Air Delivery:235 CMM Rated power: 28-30watts, Motor Speed: 340 RPM with speed control, Bearing: Double Ball Bearing, Down rod size with rubber bushes: 300mm, Operating temperature within 2 degree of ambient, warranty: 3 yrs on site, Speed control: Remote/Regulator control, Report: The firm has to submit type test report from government accredited test labs like CPRI and as directed by Incharge Elecrical. Model:EFFICIO Sweep:1200mm (48") colour:White Make: Atomberg/Crompton / Usha/Orient/ Hawa

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length 1feet to 3 feet with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (i) 8 way (4 + 24), Double door

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required.

Single pole

Triple Pole

Triple Pole & Neutral

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Labelling and Lettering of PDB / LDB of required font to suit the equipment with required coloured paint with elegant finishing as required by the department

Labelling and Lettering of Switchboard/Power board of required font to suit the equipment with required coloured paint with elegant finishing as required by the department

Supply of 4CX25 sq.mm Al. Conductor armoured XLPE, PVC sheathed 1.1kV grade cable.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (i) Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass /PVC compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (i) 4 X 25 sq. mm (28mm)

Disconnection and removing of Existing surface/ Recessed switch boards, MCB Enclosure boxes, Distribution boards, existing light fittingsof all types, ceiling fans etc. of all types and sizes and with all accessories including removing of old existing wiring and transporting all the removed material to Department or debris yard as directed by Engineer Incharge.

Supply of false ceiling recess mounted 600mmx600mm LED panel luminaire complete set including driver etc as directed by Engineer incharge. Specifications:Operating voltage 140v-270v AC input 50Hz, 26-30watts , 3000-3500 lumens,5700K-6500K,UGR19,2x2 Panel, recess mounted suitable for Armstrong/Grid ceiling/POP, CRCA powder coated white after phosphochromate treatment, 595x595x70mm , opal polystyrene diffuser sheet with special glare cut film, Compliance to EN-12464-1 : Luminaire luminance 3000cd/m2 between 65-90 deg elevation angle, High efficiency long life LED package in integral module with System lumen efficacy of 110 lm/W, Powered by an independent Isolated, SELV Output electronics LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test, Supports 0-10V, DALI and POE,3400Lm,CRI80,5700K-6500K, THD10%,PF0.95, IP20,IK03,Life class of 50,000 hrs @ L70,Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ, Internal Surge Protection:2.5 KV; Protection : Reverse Polarity, Open & Short Circuit, EMI/EMC compliance, driver safety requirement standards :is 15885-2-13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source, driver and fixture to be BIS certified. make:philips/Havells/Crompton/Trilux

Installation, Testing & Commissioning of 600mmx600mm recess mounted LED luminaires with necessary chain supports in the existing false ceiling, connections etc; as directed by Engineer incharge.

P/F 4mm copper earth wire with conduit/cable: Providing and fixing 4.00mm dia. copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.

S/F 'C' series MCB: Supplying and fixing of following rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Make:Legrand/L&T/Scheinder/ABB (i) 4 pole 63A MCB

Providing of 105mmx50mm DLP PVC trunking with all accessories and joints on the wall /table/Wall panelling as directed by Engineer incharge. Make:Legrand

Providing of 80mmx50mm DLP PVC trunking with all accessories and joints on the wall /table/Wall panelling as directed by Engineer incharge. Make:Legrand

Supply of 4C x 25 sq.mm Copper Conductor Unarmoured, FRLS, PVC Insulated, PVC sheathed 1.1kV grade Flexible Multistrand cable.

S/F 'C' series MCB: Supplying and fixing of following rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles including MCB enclosure box of suitable size complete with connections, testing and commissioning etc., as required. Make:Legrand/L&T/Scheinder/ABB (i) 4 pole 100A MCB

Supply of single phase, 230 V, 50Hz, 305mm sweep, 1400 RPM Heavy duty exhaust fan complete set as directed by Engineer incharge. Make:Crompton/Havells/Almonard