Indian Institute Of Chemical Technology Tender

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Cutting holes of required size in brick masonry wall for fixing of exhaust pipe for blower connection including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Quantity will be paid as per item no:1 executed quantity.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) For RCC bed at terrace as directed by Engineer incharge.

Providing and laying of Polypropylene 110mm outer diameter pipes of approved make with necessary G.I. Clamps and base etc., with all leads and lifts complete as directed by Engineer-in-charge.

Providing and fixing 110mm outer diameter Polypropylene 3-way Tees of approved quality including jointing with all leads & lifts complete as directed by Engineer-in-Charge.

Providing and fixing 110mm outer diameter Polypropylene plain bends of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge.

Providing and fixing 110mm outer diameter Polypropylene collars /Dummy of approved make including jointing with all leads & lifts complete as directed by Engineer-in-Charge.

ASHARE 110: 1995 (American Society of Heating Refrigerating and Air conditioning Engineers) The bidder must provide valid third party test certificate for Fume Hoods. CERTFICATION : SEFA -8 (Scientific Equipment' s and Furniture Association) The bidder must have valid SEFA Executive membership certificate. STANDARD : SEFA -8W & SEFA -8M CERTIFICATE :SEFA third party test certificate SEFA approved lab should be provided. The Furniture should conform and be tested as per SEFA approved labs (In India or Abroad) As per SEFA Guidelines DIMENSION : 2400 LX 1050W X 2400 H IN mm BED SIZE : 2250 X 900 IN mm MATERIAL OF CONSTRUCTION : 18 GAUGE ELECTRO GALVANIZED SHEET WITH EPOXY POLYESTER POWDER COATING WITH FRP BISPHENOL 'A' FUMARATE RESIN RINSED DOOR: Horizontal sliding 5mm Thick Toughened glass door with wire rope. IMPELLER : Dynamically balanced impeller POWERED BY: 1 HP 1440 RPM TEFC 3PH kiloskar /siemens make Motor. (out -Built) DUCTING : Rigid ducting of FRP of 250 MM dia 10 feet 4 mm Thick rigid FRP pipe will provide with suitable rain hood BAFFLE : A stable, non -adjustable with a single slot on the Back baffle to aid in distributing the flow of air in to and through the hood. The baffle shall be spaced out from the back linear and shall be removable for cleaning. CENTRIFUGAL BLOWER : Silent high efficiency remote blower Consisting of continuous rating motor and resistant lmpeller. The blower is designed to give a face Velocity at safe working height as per the international safe velocity norms (ANSI) The blower Body is FRP UV treated high density and chemical (Corrosion) resistant and is mounted on a metallic Stand.CASING : 6 MM thick FRP Bisphenol ' A ' fumerate Resin COUPLING : Direct SUCTION EXPECTED : 800 -1000 CFM COLOUR : IVORY /BLUE FLOORING : 18 mm (+_ 1mm ) thick BLACK GRANITE TOP will be provided AMENITIES (Included) LIGHTING : 2 NO'S LED Light will be provided. VALVE : 1 No. WATER, 1 No VACCUM, 1 No NITROGEN & 1 No COM . AIR will be provided ELECTRICAL ARRANGEMENTS: The hood super structure shall be fully wired. It also has 1 No's 32 Amps & 3NOS 16/6 Amps, 3 pin socket cum MCB, STARTER, INDICATOR LAMP will be provided CABLE ENTERING PORT : For easy access of cable of from fume hood to Electrical sockets.

Grand deluxe fume hood -Ashare Tested ASHARE 110: 1995 (American Society of Heating Refrigerating and Air conditioning Engineers) The bidder must provide vallid third party test certificate for Fume Hoods. CERTIFICATION : SEFA -8 (Scientific Equipment's and Furniture Association) The bidder must have valid SEFA Executive membership certificate. STANDARD : SEFA -8W & SEFA -8M CERTIFICATE : SEFA third party test certificate from SEFA Approved lab should be provided. The Furniture should conform and be tested as per SEFA approved labs (in India or Abroad) As per SEFA guidelines DIMENSION : 1800 L X 1050W X 2400H IN mm BED SIZE : 1650 X 900 in mm MATERIAL OF CONSTUCTON : 18 GAUGE ELECTRO GALVANIZED SHEET WITH EPOXY POLYESTER POWDER COATING WITH FRP BISPHENOL 'A'' FUMARATE RESIN RINSED DOOR : Single, vertical sliding, concealed type 5mm Thick Toughened glass door Balanced with counter weights and wire rope etc.. POWERED BY : 1 HP 1440 RPM TEFC 3PH Kiloskar /siemens make Motor. (out -Built) DUCTING : Rigid ducting of FRP OF 250MM dia. 10 feet 4 mm Thick rigid FRP pipe will provide with suitable rain hood BAFFLE : A STABLE, non - adjustable with a single slot On the Back baffle to aid in distributing the flow of air in to and through the hood. The baffle shall be spaced cut from the back linear and shall be removable for cleaning. IMPELLER : Dynamically balanced FRP impeller BAFFLED BY : 3 mm thick FRP Sheet CENTRIFUGAL BLOWER : Silent high efficiency remote blower Consisting of continuous rating motor and resistant Impeller. The blower is designed to give a face Velocity at safe working height as per the International safe velocity norms (ANSI). The blower Body is FRP UV treated high density and chemical (Corrosion) resistant and is mounted on a metallic Stand CASIN : 6mm THICK FRP Bisphenol 'A" fumerated Resin. NOISE LEVEL : 70db COUPLING : Direct BOTTOM ARRANGEMENT : 18 GAUGE ELECTRO GALVANIZED SHEET WITH EPOXY POLYESTER POWDER COATING WITH FRP BISPHENOL 'A 'FUMARATE RESIN RINSED. (INNER FRP LINING) TOP : 18 mm (+_ 1 mm) THICK BLACK GRANITE will be provided "C " FRAME CONSTRUCTON : 40 X 40 mm FRAME with Epoxy powder coating SUCTION EXPECTED : 800 -1000 CFM COLOUR : IVORY /BIUE AMENITIES (INCLUDED) LIGHTING : 2 Nos. of Led light will be provided. VALVE : 1 NO WATER, 1 NO VACCUM, 1 NO NITROGEN & 1 NO COM. AIR will be provided. ELECTRICAL ARRANGEMENTS : The hood super structure shall be fully wired It also has 1 nos 32 Amps & 3nos 16/6 Amps, 3 PIN SOCKET CUM MCB, Starter, indicator lamp, will be provided. CABLE ENTERING PORT : For easy access of cable of from fume hood to Electrical sockets. SINK & WATER TAP : 1 No of FRP SINK (12 "X 10" ) with Single way water tap will be provided.

L-Shape wall table Demension: (1650 +3200) L X750WX900H IN MM STANDARD: A s per the SEFA STANDARD MATERIAL OF CONSTRUCTION: 20 GAUGE ELECTRO GALVANIZED SHEET WITH EPOXY POLYESTER POWDER COATING WITH FRP BISPHENOL 'A'' FUMARATE RESIN RINSED Under bench modular: it consists of alternative modular with top drawer and bottom cupboards. Bottom cupboard will have one no inner horizontal partitions. All the drawer will have locking arrangements. Electrical Arrangements: 3 nos 16/6 Amps 3 pin electrical socket cum switch with electrical panel will be provided. Skin and Water tap : 1 no of PP sink (560x335) mm WITH 3WAY WATER TAP WILL BE PROVIDED. TOP: 18MM(+- 1MM) THICK BLACK GRANITE WILL BE PROVIDED.

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required.

1 x 1.5 sq.mm

2 x 1.5 sq.mm

3x 2.5 sq.mm

5 x 2.5 sq.mm

3x 4 sq.mm

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories on Metal Angular frames, pipes with necessary weldings to fix pvc pipe/ surface/recess cutting the wall and making good the same in case of recessed conduit as required. (Make:Sudhakar) 25mm

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required.

Single pole

Triple pole

Triple pole & Neutral

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm)

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required.

5/6 A switch

15/16A One way Switch

3 pin 5/6 A socket outlet

6pin 15A/16A power socket outlet

Disconnecting and removing of old DB/ Light fittings, Ceiling fans and all electrical Gadgets: Disconnecting and removing of existing light fittings of all types / Ceiling Fans/ wall mount brackets and Existing Switch boards, MCB Enclosure boxes, Old DB of all types including existing wiring and transporting all the dismantled materials with out any damage from the site to departmental stores/ debries yard as directed by the Engineer in charge.

Labelling and Lettering of PDB / LDB of required font to suit the equipment with required coloured paint with elegant finishing as required by the department.

Labelling and Lettering of Switchboard/ Power board of required font to suit the equipment with required coloured paint with elegant finishing as required by the Engineer.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting 125 A, MCCB as incomer and MCBs as outgoing. Specifications: 12 way , Double door VTPNDB with powder coated bottom and top cable Entry boxes including following switch gear . 1)125A 4 pole 36KA MCCB as incomer-1no Make: L&T/ Legrand/ Schneider

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

S/F 'C' series MCB: Supplying and fixing of following rating, 240V/415 V, 10 kA, 'C' curve. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Make:Legrand/L&T/Scheinder/ABB

3 pole 63A MCB

4 pole 63A MCB

Supply of 3.5C x 50 sq.mm Al. Conductor armoured XLPE, PVC sheathed 1.1kV grade cable.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C X 50 sq. mm (35mm)

Relocation of existing Tube light fixture including down rods of upto 8 feet length on MS Bars/ frame with suitable clamps and all arrangements with wiring the down rods, connection etc. and as directed by Engineer In-Charge.

Supply of poly carbonate 2x22 watts, 4feet, LED Tube light set, along with 2xTLED fixture, LED Tube-2no, complete with all accessories as directed by Incharge Electrical. Cat.no.TMC501P 2xTLED 22W-14# LED tube 22watts, 865, T8 Make:Philips

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED Fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required and as directed by Engineer incharge.

Extension of Existing PCC panel on top side of rating 300A, 415 V, Three Phase and Neutral, 50 Hz, Indoor, Single door, Floor Mounted, Fixed type, Compartmentalised type, CRCA Sheet steel of thickness not less than 2 mm for load bearing members and 1.6 mm thick for Doors of LT panels and 2 mm for Gland plate, suitable Tinned Copper Busbar of 300 A, neutral bus bar of same capacity, earth bar, din bar, interconnections with adequate size of copper strip extended upto the cable alley side, powder coated painting with 7tank process of approved color, including earthing etc., IP42, Dust and Vermin proof, maximum operable height of Panel must not be more than 1.7 metre and maximum vertical height of panel must not exceed 2.5 metre, Top provision by Gland plates for Incoming and outgoing cables etc. and making good of floor/base, the general construction shall conform to IS8623:93 with cable and anodized compartments labelling as required by the Engineer incharge and mounting of the following components as per the requirements. The drawing of PCC Panel approval has to be taken before fabrication, MCCB with Thermal-Magnetic release, O/C & S/C protection including Spreaders and spacers etc. PCC panel on site inspection will be done during fabrication and testing by Engineer Incharge, once the final inspection and testing is done the PCC panel can be transported to site. B. OUTGOINGS: 1) 125 A, FP, 36 KA, Thermal magnetic release MCCB -02 No. 2) 80 A, FP, 10 KA, MCB-02 No.