Hyderabad University Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Hyderabad University Tender
Civil And Construction
Eprocure
Opening Date20 Oct 2020
Closing Date28 Oct 2020
Tender Amount₹ 88,00,000
Costs
EMD
₹ 1,76,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_UoH_591923_1Bid Award Id
ViewTender No
UH/CPU/2020-21/137Tender Authority
Hyderabad University ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender Schedule for Interior furnishing work of Amenity Center and Canteen at UoH campus
Notice Inviting Tender for Interior furnishing work of Amenity Center and Canteen at UoH campus
BOQ Items
... More
Back Rack in DSW's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
90
-
-
... More
Wall Paneling in DSW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge.
36
-
-
... More
Filing / Storage Racks: Providing and installing of 18" deep storage racks , ht 2'6" / 4'0"/ 7'0"/ 8'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished. All as per the instructions.
78
-
-
... More
Dy DSW's / PrSecretaryTables : Table overall size 6'9"x2'6" with Single pedestals of four drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood. 12mm thick glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design in charge.
4
-
-
... More
Psychology Counsellor Tables :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
2
-
-
... More
Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
6
-
-
... More
Back Racks for Dy DSW / Pr. Secr. with Filinf and Storage racks: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
190
-
-
... More
Staff Work Stations: Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for pedestals. Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all internal visible area of plywood. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic channels. All handles of Brush finished SS handles, Strap lock, Box hinges etc standard hardware. All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. Cable manager provision to be provided in the table top. All as per the design and the instructions of the design in charge.
53
-
-
... More
Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor, Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge.
110
-
-
... More
Low Height Storage Racks: Providing and installing of 18" deep storage racks ,ht 2'6" / 4'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate. Inside both sides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished. All as per the instructions.
48
-
-
... More
Overhead Storage Racks: Providing and installing of 16" deep storage racks , properly Fixed on to the Walls above the Worksations, ht 2'6" / 3'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate. Inside both sides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished. All as per the instructions.
110
-
-
... More
Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board.
85
-
-
... More
Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make
380
-
-
... More
Chairs / Sofa Set: Executive Chairs (High back Revolving) HIGH BACK CHAIR High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
5
-
-
... More
Work Stations Chairs ( Medium back Revolving ) MEDIUM BACK CHAIR Medium Back Mesh Chair KM04 Mesh
Self Calibrating Multilock Mechanism Adjustable Lumbar Support
Height Adjustable Arms (AA51)
Nylon Base Model No. Amaze MB ML AA51 (or)
Equivalent in other Make / Brand
12
-
-
... More
Visitors Chairs (Low back Revolving ) LOW BACK CHAIR Versa Mesh Back Chair AN -70 Mesh
Fabric Upholstered Cushion Seat Single Lock Synchro Mechanism Adjustable Lumbar Support Height Adjustable Arms Nylon Base Model No. Versa MBGS AA21 (or)
Equivalent in other Make / Brand
9
-
-
... More
Visitors Chairs at (Low back S type Non Revolving) Forum Low mesh back visitor chair AN 70 Mesh Fabric Upholstered Cushion Seat
Fixed Arms Powder coated Sledge Base Model No. Forum VA PC FXD ARMS SLEDGE BASE (or)
Equivalent in other Make / Brand
30
-
-
... More
Sofa sets ( 1x 3seater + 1x2seater ) THREE SEATER SOFA Featherlite "Converse" Three Seater
Leatherite Sofa Size: 1900L x 750D x 820 HT TWO SEATER SOFA Featherlite "Converse" Two Seater Leatherite Sofa
Size: 1375L x 750D x 820 HT Model No. Converse-S-900-3S and Moder l No. Converse-S-900-2S (or) Equivalent in other Make / Brand
1
-
-
... More
Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24"
2
-
-
... More
Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft)
150
-
-
... More
Full Height Solid Partitions:(Psychology Counsellors ) : Providing and Fixing of Full height partitions all made with Aluminium frame work of 2.5"x 1.5" x2 mm section with 2'0"x2'0" c/c vertically and horizontally. Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the Slab and side wall available. Laminate should be considered in two colour combination. Including door All made in 35mm thick Flush door with 1mm lamination form both sides and 8mm plain glass with Etching / Acid texture border fixed with Steam beach molding duly melamine polished. 35mmX 12mm steam beach Lipping to be provided to all the edges of the door . Rate also to include the cost of Door Frame made with 3.5" X 1.5" Steam beach wood. Door Frame should be fixed properly to the Partitions, All Hardware should be of Brass / SS Brush finish with ISI mark. Hardware includes Concealed Door closer, Cylindrical Lock, Door stopper and other standard needs . All as per design and instructions of the design in charge.
175
-
-
... More
B. CHIEF WARDEN: CHIEF WARDEN CHAMBER
-
-
-
... More
CW's Table : CW's Table overall size 8'0"x3'6" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
1
-
-
... More
CW's Side Runner / Credenza (Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
1
-
-
... More
Back Rack in CW's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
90
-
-
... More
Wall Paneling in CW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge.
36
-
-
... More
Additional CW Table : Table overall size 6'9"x2'6" with Single pedestals of four drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood. 12mm thick glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
1
-
-
... More
Dy CW's Tables :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
2
-
-
... More
Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
3
-
-
... More
Back Racks with storage racks for Additional CW : All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
48
-
-
... More
Staff Work Stations: Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly maleminepolished.Cable manager provsion to be provided in the table top. All as per the design and the instructions of the design incharge.
82
-
-
... More
Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge.
110
-
-
... More
Low Height Storage Racks: Providing and installing of 18" deep storage racks ,ht 2'6" / 4'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions.
72
-
-
... More
Overhead Storage Racks: Providing and installing of 16" deep storage racks ,prpoerly Fixed on to the Walls above the Worksations, ht 2'6" / 3'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions.
124
-
-
... More
Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board.
85
-
-
... More
Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make
300
-
-
... More
Chairs / Sofa Set: Executive Chairs (High back Revolving) HIGH BACK CHAIR High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
4
-
-
... More
Work Stations Chairs ( Medium back Revolving ) MEDIUM BACK CHAIR Medium Back Mesh Chair KM04 Mesh
Self Calibrating Multilock Mechanism Adjustable Lumbar Support
Height Adjustable Arms (AA51)
Nylon Base Model No. Amaze MB ML AA51 (or)
Equivalent in other Make / Brand
12
-
-
... More
Visitors Chairs (Low back Revolving ) LOW BACK CHAIR Versa Mesh Back Chair AN -70 Mesh
Fabric Upholstered Cushion Seat Single Lock Synchro Mechanism Adjustable Lumbar Support Height Adjustable Arms Nylon Base Model No. Versa MBGS AA21 (or)
Equivalent in other Make / Brand
10
-
-
... More
Visitors Chairs at (Low back S type Non Revolving) Forum Low mesh back visitor chair AN 70 Mesh Fabric Upholstered Cushion Seat
Fixed Arms Powder coated Sledge Base Model No. Forum VA PC FXD ARMS SLEDGE BASE (or)
Equivalent in other Make / Brand
10
-
-
... More
Sofa sets ( 1x 3seater + 1x2seater ) THREE SEATER SOFA Featherlite "Converse" Three Seater
Leatherite Sofa Size: 1900L x 750D x 820 HT TWO SEATER SOFA Featherlite "Converse" Two Seater Leatherite Sofa
Size: 1375L x 750D x 820 HT Model No. Converse-S-900-3S and Moder l No. Converse-S-900-2S (or) Equivalent in other Make / Brand
1
-
-
... More
Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24"
2
-
-
... More
Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft)
150
-
-
... More
Full Height Solid Partitions ( Dy CW s): Providing and Fixing of Full height partitions all made with Aluminium frame work of 2.5"x 1.5" x2 mm section with 2'0"x2'0" c/c vertically and horizontally. Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the Slab and side wall available. Laminate should be considered in two colour combination. Including door All made in 35mm thick Flush door with 1mm lamination form both sides and 8mm plain glass with Etching / Acid texture border fixed with Steam beach molding duly melamine polished. 35mmX 12mm steam beach Lipping to be provided to all the edges of the door . Rate also to include the cost of Door Frame made with 3.5" X 1.5" Steam beach wood. Door Frame should be fixed properly to the Partitions, All Hardware should be of Brass / SS Brush finish with ISI mark. Hardware includes Concealed Door closer, Cylindrical Lock, Door stopper and other standard needs . All as per design and instructions of the design incharge.
180
-
-
... More
Open Filling Racks: 18" Deep Ready-made Racks made up of Slotted MS Angles and MS Shelves of 1.2mm thick (18 guage ) MS CRCA Sheets. Duly Powder coated finish. Shelves at every 15" gap. Each module of 7'ht and 3' wide.
15
-
-
... More
C. SEMINAR HALL / COMMON AREAS
-
-
-
... More
Overhead Storage Racks: 6" High Stage all made with 19mm thick ply and laminate, frame of 18"x18" with 6"x19mm ply and top coverd with 19mm ply and 1mm Laminate
96
-
-
... More
Marker Board: White marker board all made with 12mm thick plywood on wall, 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board.
72
-
-
... More
Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make
180
-
-
... More
Table on Dias :3'0"x2'0" Simple Tables with 19mm ply with laminate finish.
4
-
-
... More
Work Stations Chairs ( Medium back Revolving ) MEDIUM BACK CHAIR Medium Back Mesh Chair KM04 Mesh
Self Calibrating Multilock Mechanism Adjustable Lumbar Support
Height Adjustable Arms (AA51)
Nylon Base Model No. Amaze MB ML AA51 (or)
Equivalent in other Make / Brand
4
-
-
... More
Audience Chairs with Foldable Writing Pads:- FOLDING PAD CHAIR Forum Low Mesh Back Visitor Chair
AN 70 Mesh Fabric Upholstered Cushion Seat
Fixed Arms
Writing Desk Powdercoated Four Legs with Nylon castors Model No. Forum VA PC 4 LEGS FXD ARMS WD –BIG (or)
Equivalent in other Make / Brand
72
-
-
... More
Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft)
675
-
-
... More
Waiting lounge Chairs ( Ground and First Floor ): Heavy Duty Set of Waiting Lounge Chairsall made with Stainless Frame and SS perforated Sheet. Each set containing 3 seats. All as per sample approved.
45
-
-
... More
Signages: All the Signages made with 1mm thick SS brush finished Sheet with Etched and Enamel filled Lettering, properly fixed at instructed placement.
85
-
-
... More
Wall Murals / Graphics : 3" to 4" Deep Wall Murals all made with the Mixed material like Siporex/ White cement/with Colour finish, all as per approved designs, the cost should include all material ,making, finishing etc and designing as per clietns requirment. ( Various Sizes equals to 300 Sqft )
300
-
-
... More
D. FIRST FLOOR: CHIEF PROCTOR CHIEF PROCTOR CHAMBER
-
-
-
... More
CP's Table : DWS's Table overall size 8'0"x3'6" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
1
-
-
... More
CP's Side Runner / Credenza ( Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
1
-
-
... More
Back Rack in DSW's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
90
-
-
... More
Wall Paneling in DSW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge.
36
-
-
... More
Tables at CP Pr. Secretary's Room :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
2
-
-
... More
Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
2
-
-
... More
Filing and Storage racks at CP PrSecr. room: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
56
-
-
... More
Conference Room Table: 24" Deep Table with Box type Base and 19 mm Top all with 1mm thick Laminate on top and 1mm lamiante for other surfaces, All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished .Cable manager along with Cable trnchprovsion to be provided in the table top . All as per the design and the instructions of the design incharge. Table Should in 4' Modules..
40
-
-
... More
Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board.
120
-
-
... More
Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make
300
-
-
... More
Chairs / Sofa Set: Executive Chairs (High back Revolving) HIGH BACK CHAIR High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
3
-
-
... More
Conference Room Chairs ( Medium back Revolving ) (High back Revolving) High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
20
-
-
... More
Visitors Chairs (Low back Revolving ) LOW BACK CHAIR Versa Mesh Back Chair AN -70 Mesh
Fabric Upholstered Cushion Seat Single Lock Synchro Mechanism Adjustable Lumbar Support Height Adjustable Arms Nylon Base Model No. Versa MBGS AA21 (or)
Equivalent in other Make / Brand
4
-
-
... More
Visitors Chairs at (Low back S type Non Revolving) Forum Low mesh back visitor chair AN 70 Mesh Fabric Upholstered Cushion Seat
Fixed Arms Powder coated Sledge Base Model No. Forum VA PC FXD ARMS SLEDGE BASE (or)
Equivalent in other Make / Brand
6
-
-
... More
Sofa sets ( 1x 3seater + 1x2seater ) THREE SEATER SOFA Featherlite "Converse" Three Seater
Leatherite Sofa Size: 1900L x 750D x 820 HT TWO SEATER SOFA Featherlite "Converse" Two Seater Leatherite Sofa
Size: 1375L x 750D x 820 HT Model No. Converse-S-900-3S and Moder l No. Converse-S-900-2S (or) Equivalent in other Make / Brand
1
-
-
... More
Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24"
2
-
-
... More
Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft)
150
-
-
... More
Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge.
30
-
-
... More
E. ICC GS CASH Chairperson Chamber:
-
-
-
... More
ICC GS CASH Cp'sTable : Head's Table overall size 7'0"x3'0" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
1
-
-
... More
ICC GS CASH's Side Runner / Credenza ( Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
1
-
-
... More
Back Rack in ICC GS CASH's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
45
-
-
... More
Wall Paneling in DSW Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge.
36
-
-
... More
Tables at ICC GS CASH Staff's Room :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
2
-
-
... More
Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
2
-
-
... More
Filing and Storage racks at ICC GS CASH PrSecr. room: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
130
-
-
... More
Staff Work Stations: Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly maleminepolished.Cable manager provsion to be provided in the table top. All as per the design and the instructions of the design incharge.
10
-
-
... More
Conference Room Table: 24" Deep Table with Box type Base and 19 mm Top all with 1mm thick Laminate on top and 1mm lamiante for other surfaces, All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished .Cable manager along with Cable trnchprovsion to be provided in the table top . All as per the design and the instructions of the design incharge. Table Should in 4' Modules..
40
-
-
... More
Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board.
80
-
-
... More
Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make
230
-
-
... More
Chairs / Sofa Set: Executive Chairs (High back Revolving) HIGH BACK CHAIR High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
2
-
-
... More
Conference Room Chairs ( Medium back Revolving ) (High back Revolving) High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
24
-
-
... More
Visitors Chairs (Low back Revolving ) LOW BACK CHAIR Versa Mesh Back Chair AN -70 Mesh
Fabric Upholstered Cushion Seat Single Lock Synchro Mechanism Adjustable Lumbar Support Height Adjustable Arms Nylon Base Model No. Versa MBGS AA21 (or)
Equivalent in other Make / Brand
3
-
-
... More
Visitors Chairs at (Low back S type Non Revolving) Forum Low mesh back visitor chair AN 70 Mesh Fabric Upholstered Cushion Seat
Fixed Arms Powder coated Sledge Base Model No. Forum VA PC FXD ARMS SLEDGE BASE (or)
Equivalent in other Make / Brand
12
-
-
... More
Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft)
150
-
-
... More
Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge.
45
-
-
... More
F. NSS COORDINATOR
-
-
-
... More
Tables at NSS Coordinators and DO's Room :Table overall size 5'0"x2'3" with Single draw pedestals. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . 12mm thick Glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
2
-
-
... More
Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
2
-
-
... More
Filing and Storage racks at NSS coordtr. room: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
160
-
-
... More
Full Height Solid Partitions ( NSS Coordinator's): Providing and Fixing of Full height partitions all made with Aluminium frame work of 2.5"x 1.5" x2 mm section with 2'0"x2'0" c/c vertically and horizontally. Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the Slab and side wall available. Laminate should be considered in two colour combination. Including door All made in 35mm thick Flush door with 1mm lamination form both sides and 8mm plain glass with Etching / Acid texture border fixed with Steam beach molding duly melamine polished. 35mmX 12mm steam beach Lipping to be provided to all the edges of the door . Rate also to include the cost of Door Frame made with 3.5" X 1.5" Steam beach wood. Door Frame should be fixed properly to the Partitions, All Hardware should be of Brass / SS Brush finish with ISI mark. Hardware includes Concealed Door closer, Cylindrical Lock, Door stopper and other standard needs . All as per design and instructions of the design incharge.
110
-
-
... More
Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board.
24
-
-
... More
Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make
48
-
-
... More
Chairs / Sofa Set: Executive Chairs (High back Revolving) HIGH BACK CHAIR High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
2
-
-
... More
Visitors Chairs at (Low back S type Non Revolving) Forum Low mesh back visitor chair AN 70 Mesh Fabric Upholstered Cushion Seat
Fixed Arms Powder coated Sledge Base Model No. Forum VA PC FXD ARMS SLEDGE BASE (or)
Equivalent in other Make / Brand
8
-
-
... More
Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft)
120
-
-
... More
G. PGAB - Placement Cell PGAB - Chairman Chamber
-
-
-
... More
PGAB Chairman's Table : Head Table overall size 8'0"x3'6" with One Pedestal with 4 Drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel.8 / 9 mm for drawer bottom. Table top should be of Italian Marble of Beige colour Variety ( Rs 275/- to 300/- per Sqft base cost ) to be fixed on 19mm plywood base, Marble duly polished with 3M Tin Oxide Polish with Edges Double moulded. 4mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces and 1mm thick laminate for all internal visible and non visibleareaarea of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should be covered with 12mm thick plain Steam beech beading duly malemine polished. Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
1
-
-
... More
PGAB Head Side Runner / Credenza ( Computer Table ): Side table of size 5'6"x2'3"x21"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate and 4mm thick veneer for the Top and front area. 8mm Glass to be proveded on Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
1
-
-
... More
Back Rack in PGAB Head's Cabin: All as per the Design made in 19mm and 9mm plywood with 4mm veneer with malemineploish finish for all Exposed and 1mm thick laminate for Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
90
-
-
... More
Wall Paneling in Cabin: Providing and Fixing of Wall Paneling made with 1.5"x1.5"x2mm thick Aluminim Frame work Properly fixed to the Wall or Column with proper Spirit / Plumb level. Frame work to be covered with 6mm thick Plywood and 4 mm thick natural veneer (Base rate 120/- sqft ) duly malemine polished for all the exposed surfaces . All as per the design and instructions of the design in charge.
36
-
-
... More
Filing / Storage Racks: Providing and installing of 18" deep storage racks , ht 2'6" / 4'0"/ 7'0"/ 8'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions.
120
-
-
... More
PGAB PrSecretaryTables : Table overall size 6'9"x2'6" with Single pedestals of four drawers. 19mm thick plywood for Top and for padestals . Top should be shown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood. 12mm thick glass TOP. All the surfaces of the draws internally and externally should be covered with 1mm thick laminate. All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly malemine polished. 6mm thick plain glass with bevelled egdes Table top should be provided.Cable manager provsion to be provided in the table top even in glass. All as per the design and the instructions of the design incharge.
1
-
-
... More
Side Tables / Credenzas ( Computer Table ) : Side table of size 5'0"x2'3"x18"deep . 19mm ply for all horizontal and verticals. One Key board tray made with 19mm plywood and 1mm lamination for all inside surfaces , sliding on telescopic chanels. Two Flap door below the Key board tray. 9mm thick for the back side of the side table to be fixed. All exposed areas including back side should be covered with 1mm thick laminate . All exposed areas including back side should be covered with 1mm thick laminate and 1mm thick laminate for the Top. All Hardware matching to the Table. All as per the design and the instructions of the design in charge.
1
-
-
... More
Back Racks for PGAB Pr. Secr. with Filinf and Storage racks: All as per the Design made in 19mm and 9mm plywood with 1mm thick laminate for all Exposed as well as Internal surface of the Plywood. Bottom part up to 2'6" ht will be of 18" deep and remaining ht up to 7'0" will be 16"deep. 8mm glass with etching / acid texture doors should be provided at 16" deep unit with Steam beech wood frame work of 3"x1.5" section duly melamine polished. All the Shelves behind glass doors should be of 12mm thick flat edge polished fixed in SS D brackets. All other Hardware should be matching to table and side table. All as per the design and the instructions of the design in charge.
60
-
-
... More
Staff Work Stations : Work Stations overall size 4'9"x2'0" / 4'6"x2'0" with Single pedestal. 19mm thick plywood for Top and for padestals . Top should be shhown double thickness at the edges. 12mm plywood for modesty panel. 6mm for drawer bottom. 1 mm thick laminate for the top. 1mm thick laminate for all the exposed surfaces and all intrnal visible area of plywood . All the surfaces of the draws internally and externally should be covered with 1mm thick laminate.All the draws and key board tray should slide on telescopic chanels. All handles of Brush finished SS handles , Strap lock , Box hinges etcstanderdhardware.All the Exposed Edges of Plywood should covered with 12mm thick plain Steam beech beading duly malemine polished. 24mm x 40mm thick Steam beech moulding for the Table top duly maleminepolished.Cable manager provsion to be provided in the table top. All as per the design and the instructions of the design incharge.
40
-
-
... More
Low Height Solid Partitions : Providing and Fixing of Low height partitions all made with Aluminium frame work made of 2.5"x1.5"x 2mm thick section with 2'0"x2'0" c/c vertically and horizontally . Frame to be covered with 6mm plywood from both sides. 1mm thick laminate to be covered from both the sides of the partition. Frame should be properly fixed to the Floor , Vertical members should be firmly to the side wall available. Laminate should be considered in two colour combination. All as per the design and instructions of the design in charge.
110
-
-
... More
Low Height Storage Racks: Providing and installing of 18" deep storage racks ,ht 2'6" / 4'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions.
24
-
-
... More
Overhead Storage Racks: Providing and installing of 16" deep storage racks ,prpoerly Fixed on to the Walls above the Worksations, ht 2'6" / 3'0", length as per drg. All made in 19mm thick plywood and 9mm plywood for back side. All the Outside and Inside exposed surfaces of plywood to be with 1mm thick laminate and top with 1.5mm thick laminate.Insidebothsides 1mm laminated 19mm plywood loose shelves to be provided at every 15" gap. Vertical supports should not exceed 3'0" gap and each door shutter size should not exceed 18" in width and 3'6" in ht. All hardware should be as per specs. All exposed edges of plywood should be with 12mm thick Steam beach wood molding duly melamine polished.All as per the instructions.
66
-
-
... More
Pinup Board / Marker Board: Pinup Board / White marker board all made with 12mm thick plywood on wall, with 12mm thick soft board, 6mm sponge and felt cloth on it to be fixed for Soft pin up board. 1mm thick special white marker board laminate to be fixed on 12mm thick plywood for Marker board.
85
-
-
... More
Roller Blinds : Roller Blinds of thick fabric as per specification and brand. All as per the instructions of the design in charge. Mac / Touch or equalent Standard make
240
-
-
... More
Chairs / Sofa Set: Executive Chairs (High back Revolving) HIGH BACK CHAIR High Back with Head Rest Mesh Back Cushioned Seat Multilock Mechanism Height Adjustable Arms (AA51) Nylon Base Model No. Liberate (MESH) HB ML AA51
(or)
Equivalent in other Make / Brand
2
-
-
... More
Work Stations Chairs ( Medium back Revolving ) MEDIUM BACK CHAIR Medium Back Mesh Chair KM04 Mesh
Self Calibrating Multilock Mechanism Adjustable Lumbar Support
Height Adjustable Arms (AA51)
Nylon Base Model No. Amaze MB ML AA51 (or)
Equivalent in other Make / Brand
4
-
-
... More
Visitors Chairs (Low back Revolving ) LOW BACK CHAIR Versa Mesh Back Chair AN -70 Mesh
Fabric Upholstered Cushion Seat Single Lock Synchro Mechanism Adjustable Lumbar Support Height Adjustable Arms Nylon Base Model No. Versa MBGS AA21 (or)
Equivalent in other Make / Brand
6
-
-
... More
Visitors Chairs at (Low back S type Non Revolving) Forum Low mesh back visitor chair AN 70 Mesh Fabric Upholstered Cushion Seat
Fixed Arms Powder coated Sledge Base Model No. Forum VA PC FXD ARMS SLEDGE BASE (or)
Equivalent in other Make / Brand
10
-
-
... More
Sofa sets ( 1x 3seater + 1x2seater ) THREE SEATER SOFA Featherlite "Converse" Three Seater
Leatherite Sofa Size: 1900L x 750D x 820 HT TWO SEATER SOFA Featherlite "Converse" Two Seater Leatherite Sofa
Size: 1375L x 750D x 820 HT Model No. Converse-S-900-3S and Moder l No. Converse-S-900-2S (or) Equivalent in other Make / Brand
1
-
-
... More
Corner / Side table : Corner and Side table at Sofa sets made with wood and Glass Top 24"x24"
2
-
-
... More
Wall Paper : Supply and Fixing A grade washable Wall Paper on properly required wall surface.All as per the instructions of the design in charge.( basic rate Rs 100/- sqft)
150
-
-
... More
Outdoor Furniture : Providing and Supply of 4' dia Table , 4 Chairs and an Umbrella of 5'Dia of Outdoor Grade
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements