Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Supply delivery and fixing of new 10 HP;Providing HYSD steel bars (Fe 500/Fe550 Grade as per IS 1786 to 1979) Steel Manufactures within Telangana with minimum integrated Installed Production Capacity of 2 Lakh MT per annum (AF STAR TMT/MS LIFE TMT, RADHA TMT, SUGNA TMT), of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in positions with cover blocks of approved materials and size and tying and lapse splicings with binding wire of 18 guage forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as over lapse, coupling, chairs, spacer bars, including cost and conveyance of binding wires, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding taxes like GST on all materials etc., complete foer finished item of work in all floors (APDSS No.126). For bars < 36mm dia for reinforcement (APDSS No.126) asper RCC Quantity x 60kg/per cum

Supply delivery and fixing of new 10 HP;Supply and placing VRCC M-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (As per GO Ms No 37 Industries and Commerce (Mines-1) Dept, dated 29.05.2018, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 is adopted), coarse aggregate, water etc., to site and all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, steel centering & steel shuttering, etc., complete but excluding cost of steel and its fabrication charges for finished item of work, centering, shuttering, and also excluding seigniorage charges and taxes like GST etc. (APSS 403) M20 Grade Pedestals size of 0.30x0.30x1.00mtr

Supply delivery and fixing of new 10 HP;Lowering and jointing G.1. pipes and specials/fittings including excavation of trench of 0.5m width and 0.5m depth in all soils except rock requiring blasting and refilling trenches after laying and jointing pipes also including cost of jointing materials but excluding the cost of pipes, reference to specifications. BIS No 783/85, as directed by the H. M.W.S.&. S. Board Engineers. 75 mm dia Gl pipe