Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;150 mm diax 90 degree MS bends

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Supply, delivery Jointing of 150 mm dia MS pipe and specials with flanges using 8mm thick MS plate including fabrication charges epoxy painting transportation etc complete also Including of Cost and Conveyance of all the materials, all Leads and Lifts and Labour charges etc., Complete as directed by the departmental officers 150mm dia MS pipe

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;1100 mm diax 25 mm thick

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993 excluding cost of MS specials including cost and conveyance to site etc., complete.as directed by the departmental officers 150 mm diax 15 mm thick

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993 excluding cost of MS specials including cost and conveyance to site etc., complete.as directed by the departmental officers 1000 mm diax 25 mm thick

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacturing, supply and Delivery of 1100x1000 mm dia MS Reducer fabricated with 12mm MS plate, including cost of plate, fabrication, painting, transportation, laying and jointing etc., complete as directed by the departmental officers. 1100x1000mm dia MS reducers

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per Public Health Items (Part ?IV) SoR 2023-24 I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per requirement of dept.1000mm dia DI D/F Butterfly valve

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the deptt.

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the deptt. 150mm dia DI D/F Air valve

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Hire charges for Welding set

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Lpg Gas

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Oxygen Gas

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Welding electrodes 4 mm dia Cost of cionsumables for 2 jobs

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Fitter helpers ( For Night shift )

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Fitter helpers

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Fitters ( For Night shift )

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Fitters

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Welders ( For Night shift )

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Welders

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Man mazdoor ( For Night shift )

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Engaging the following labour for removing of earth under pipeline for the operation of hydaulic excavator and for jointing and welding of MS pipelines with true to alignment and gardient in the ready made trenches during junction work etc., including of all incidental and opearational charges and all other labour charges etc., Complete. within stipulated shutdown period as directed by departmental officers. for junction work at either ends of the pipeline Man mazdoor

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Hire charges for engaging hydraulic Shovel 0.85 cum 110 hp, including cost and convayance of Fuel and lubricants ,wages for operator helper etc and all incidental and operational charges other labour chrges etc., Complete. As directed by dept. officers.

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Hire charges for engaging Air compressor 8.5 cmm (diesel) at site, including cost of Fuel ,wages for operator helper etc and all incidental and operational charges other labour chrges etc., Complete. As directed by dept. officers.

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Hire charges for engaging Diesel Generator set 50 KVA including cost of Fuel ,wages for operator helper etc and all incidental and operational charges other labour chrges etc., Complete. As directed by dept. officers.

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Hire charges of tower crane including cost and convenace of machinery to site wages for operator ,helper with fuel and all other incidental and operation charges etc complete as directed by the departmetal officers.

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacture, Supply, delivery and Jointing of 1200 mm dia MS Bends fabricated by using 12 mm thick MS plate including fabrication charges epoxy painting transportation etc complete also Including of Cost and Conveyance of all the materials, hire charges for required machinery and tools, all incidental and operational charges and Labour charges etc., Complete as directed by the Departmental Officers (iii) 61-90 Deg. bend:

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacture, Supply, delivery and Jointing of 1200 mm dia MS Bends fabricated by using 12 mm thick MS plate including fabrication charges epoxy painting transportation etc complete also Including of Cost and Conveyance of all the materials, hire charges for required machinery and tools, all incidental and operational charges and Labour charges etc., Complete as directed by the Departmental Officers (ii) 31-60 Deg. bend:

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacture, Supply, delivery and Jointing of 1000 mm dia MS Bends fabricated by using 12 mm thick MS plate including fabrication charges epoxy painting transportation etc complete also Including of Cost and Conveyance of all the materials, hire charges for required machinery and tools, all incidental and operational charges and Labour charges etc., Complete as directed by the Departmental Officers. (i) 0-30 Deg. bend:

Making interconnection main between existing 1100mm dia MS inlet of 22ML GLSR from 80ML HMWSSB GLSR;Manufacture Supply and delivery of 1000mm dia Mild Steel pipes using 10mm thick MS plates conforming to IS 2062- 1992 grade A, manufactured as per IS-3589- 2001 in suitable lengths to suit the site conditions, including testing at factory for a test pressure of 24 Kg/sqcm., including inlining and out coating the fabricated MS pipes with foodgrade epoxy paint including cost of mild steel plates, and other required materials and inclusive of all taxes, and duties and delivery of fabricated inlined and outcoated pipes to site, loading, unloading and hoisting carefully, lowering the pipes in to ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and hydraulic testing of pipeline to a field pressure of 18 Kgs/Sq.Cm. in convenient stretches and as directed by the departmental officers, inclusive of the cost of the necessary testing equipment and other incidental and operational charges etc., complete as directed by the Departmental Officers.