Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply of 120 Sq.mm 3.5 Core XLPE insulated, 1100V grade armoured aluminium cable with ISI mark as per specification confirming to IS:7098 (Part 1) Makes: RPG/ V-Guard/ Fortune Art / Suncab/Finecab/ Gemscab/Payal/Orbit complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply and Fixing of DOL Starter 7.5 HP, 250v, single Phase, 50Hz, with SS enclosure comprising of contactor with bi-metallic relay with necessary push buttons etc.complete -makes: Semens/Crompton greaves/L&T/BCH/ABB complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply and transportation of 43 / 45 W +/-10% (>=4500 Lumens) LED Street light Body made of high grade pressure die cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F> 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver. Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS,CRI>70, Inbuilt Electrical protections like Overvoltage, short circuit, Over load, Open Circuit, Misfiring, etc complete with BIS certification with 5 years warranty. The contractor must furnish the manufacturer warranty letter, LM 79and LM 80 certificates. LUMINAIRE MAKE: PHILIPS / OSRAM / CROMPTON/Wipro / HAVELLS / FIEM / Panasonic / GM/ MAKE: PHILIPS LUMILEDS /CREE / NICHIA /OSRAM/SAMSUNG complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply of 6 Sq.mm 4 Core XLPE insulated, 1100V grade armoured aluminium cable with ISI mark as per specification confirming to IS:7098 (Part 1) Makes: RPG/ V-Guard/ Fortune Arrt / Suncab /Finecab / Gemscab / Payal / Orbit complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply of power supply cable outdooe type junction box of Height 14" X width 16" x Depth 8" with connectors complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Limit Switch Operated by the motion of a mechanical part or the presence of an object complete as directed by dept officers..

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply of 1.5 Sq.mm 2 Core PVC/XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098/ Part-1/1988 including all transportation charges etc complete. Makes: Finolex / RR kabel / Havells / Polycab / RPG/KEI/Gloster / V-Guard / Ollivin / Beljin/ Bonton /Avocab complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply of 10 Sq.mm 4 Core XLPE Insulated, 1100V grade armoured aluminium cable with ISI mark as per specification confirming to IS:7098 (Part 1) Makes: RPG / V-Guard/ Fortune Arrt / Suncab /Finecab / Gemscab / Payal / Orbit

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Supply, Transportation, and Installation of 150mm x 50mm x 2mm thick hot dip GI perforated cable tray without cover along with coupler plates, T's, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall Ceiling etc. complete for finished item of work. (Makes: DEC/MNR/ H FAB or equivalent) complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Providing 15 HP Motor Control Panels including control panel all aspects of 160 Amp MCCB, RYB LED indicators, Voltmeter, Volt selector switch, 150/5A Ammeter, Amps selectors with, 120A 4 Pole on load C.O.S, 125A MCCB TPN 30 KV,100A MCCB TPN 30 KV etc complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Rectification of Electrical operating system of Crest Gates of Manjira Barrage duly Providing New Elec control Panels, Cable Trays, Replacement of Cables

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;HOISTS: machinery Components - painting hoist machinery, on sand blasted surfaces with one coats of zinc phosphate primer (airless spray preferred) 50microns/coat and three coats of aluminium paint or synthetic enamel, 25 microns/coat cost of all materials, labour, scaffolding etc., complete with all leads and all lifts IRR-GAW-3-5 complete as directed dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;HOISTS:STRUCTURAL COMPONENTS- painting structurals on sand blasted surfaces with two coats of zinc phosphate primer (airless spray preferred) 40microns/coat and one coat 65+/-5 of alkyd based micaccous iron oxide paint followed by two coats of synthetic enamel paint 25 microns/coat cost of all materials, labour, scaffolding etc., complete with all leads and all lifts (SI: IRR. GAW:3-4/2023-24) complete as directed dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Painting of embedded metal parts and all types of gates, stoplogs,etc, on sand blasted surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5 and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns (total 300 microns) cost of all materials, labour, scaffolding etc., complete with all leads and all lifts (IRR-GAW-3-2/2023-24) complete as directed by dept officers.

Sand Blasting and Painting to EM Parts, Vertical gates, Hoist bridges and Hoist Equipment;Cleaning gates/Hoist/Embedded parts/lifting beams etc expose fresh metal surface for painting by sand blasting method as per specifications inlcuding cost of all meterial, labour, machinery, scaffolding etc complete with initial lead for sand upto 1 km and all lifts (SI: IRR-GAW-3-1) complete as directed by dept officers.