Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Hire charges for engaging compressor of 8.5 cmm (diesel) including cost of Fuel ,wages for driver helper, to and from charges etc., complete.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Operation of scour valves, air valves, gate valves etc., for scouring the pipe line and closing the scour valves after completing the work of pipe line including labour charges, all other incidental and operational charges etc., complete as directed by the departmental officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Junction work on 2375 MS line with 600 mm dia MS pipe duly lowering and fixing of 600 mm dia MS Pipe carefully into the ready made trenches and fixing it carefully with the existing MS pipe line without damaging the existing pipe line making welding with experience welders who has done similar type of works previously , including hire charges of gas cutting set, Generator, welding transformer wages for Fitters, Welders and helpers all incidental and operational charges etc., complete as directed by departmental officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Job work for fixing the 600mm dia MS dummy plate of 20 mm thick and making 3 line arc welding from inside and outside duly providing and entering into the manhole and providing extra padding to the 600 mm dia MS Pipe with Experienced fitters and welders who has performed similar type of jobs by field gas cutting set welding with 3 line arc welding including, hire charges of welding transformer, equipment, cost of electrodes, gas, charges to semi and skilled workers and and all other labour charges and other incidental and operational charges etc., complete as directed by the dept officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Job work for making Junction work on 600 MS pipe with 600 mm dia MS pipe duly lowering carefully into the ready made trenches and fixing it carefully and making welding with experience welders who has done similar type of works previously, including hire charges of gas cutting set, Generator, welding transformer wages for Fitters, Welders and helpers all incidental and operational charges etc., complete as directed by departmental officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;10 HP Pumps

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Bailing out water from the pipeline trenches with oil engine driven pumpsets, including hire charges fuel charges and wages for driver and helper etc complete as directed by the departmental officers. 5 HP Pumps

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc complete as directed by the departmental officers for finished item of work in all floors.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Plain Cement Concrete PCC M 20 Nominal Mix; using 20 mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;c)For short walls

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;b) For Long Walls

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work,including centering, shuttering. a) For Floor Slab

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Plain Cement Concrete PCC (1:4:8) prop; using 40mm guage hard granite machine crushed metal including cost and conveyance of all materials to site, centering, machine mixing, lifts and delifts, leads, laying in position, compacting, curing, all labour charges, etc., complete up to Plinth Level.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Job work for welding the 600 mm dia MS specials to the 600mm dia valve and Lowering and Fixing of 600mm dia Valve keeping in position, jointing, welding true to alignment and gradient, making leak proof joints tightening with new nuts & bolts, rubber packing with Experienced fitters and welders who has performed similar type of jobs by field gas cutting set welding with 3 line arc welding including, hire charges of welding transformer, equipment, cost of electrodes, gas, charges to semi and skilled workers and and all other labour charges and other incidental and operational charges etc., complete as directed by the dept officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993 excluding cost of MS specials including cost and conveyance to site etc., complete 300 mm dia

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993 excluding cost of MS specials including cost and conveyance to site etc., complete 600 mm dia

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163- 89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. 300 mm dia PN 16

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per requirement of dept 600mm dia PN 16

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of stainless steel / nickel weld overlay, with powder or liquid Epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504 or BS 5155 or IS:13095. Drilled as per requirement of dept. 600mm dia PN 25

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacturing supply, delivery and laying of 300mm dia MS pipe line, fabricated with 12mm thick MS plate including cost of MS plate, fabrication, welding and transportation charges to site, with 2 coats of epoxy black paint etc., complete as directed by the Departmental Officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacture, supply, delivery, laying and testing of 600mm dia MS bend fabricated with 12mm thick MS plate including cost of mild steel plates with 3 line arc welding as per standard and two coats of epoxy blue paint etc., complete as directed by the Departmental Officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacture, supply, delivery, laying and testing of 600mm dia MS bend fabricated with 16mm thick MS plate including cost of mild steel plates with 3 line arc welding as per standard and two coats of epoxy blue paint etc., complete as directed by the Departmental Officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacture, supply and delivery of 600mm dia M.S Pipe fabricated with 12mm thick ms plate conforming to IS 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by shortcreting or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labour charges, Cost of Laying, Jointing, Hydrostatic Filed TestPressure, Including Cost of Site Welding,Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing, transportation to anywhere in T.G, but excluding all taxes.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Manufacture, supply and delivery of 600mm dia M.S Pipe fabricated with 16mm thick ms plate conforming to IS 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by shortcreting or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labour charges, Cost of Laying, Jointing, Hydrostatic Filed TestPressure, Including Cost of Site Welding,Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing, transportation to anywhere in T.G, but excluding all taxes.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Barricading, hoarding, lighting and watching etc., for water supply and sewerage works for trenches of depths upto 6?-0? (2 Meter) below G.L as per with Bamboo, including labour charges and all other incidental and operational and operational charges etc., as directed by the departmental officers etc complete.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Collection supply and filling with Gravel in trenches ,sides of foundations & basement wherever necessary and the pipeline trenches after laid, jointed, executed, tested with intial lead in layors not exceeding 15 cm thick , consolidating each deposited layer by watering and ramming including cost and conveyonce of gravel water to work site and all operational ,incidental,labour charges,hire charges of T&P .,complete for finished item of work (APSS No.309&310)

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Providing Class- S bedding and surround for pipes as per specification drawing with good gravel including cost of gravel and conveyance to site with all leads, lifts including watering tamping, ramming, labour charges and all other incidental and operational charges etc complete as per detailed specification/drawings/ or directions of Departemental Officers

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Excavation in Hard rocky soils by Machine require blasting with controlled blasting such as hard rock, sheet rock and boulders in habitant areas where conventional blasting can not be done including cost of blasting materials, with different lifts as per specifications and drawings and as directed by the departmental officers, including protecting walls and other structures, existing water supply lines, sewers, power cables, telephone cables/ducts, storm water drains, traffic signals etc., wherever it is possible so as not to disturb the existing utility services etc., taking all precautionary measures in the restricted areas such as urban areas diversion of the traffic, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and excluding backfilling for Foundation of Buildings, GLSRS, ELSRS and Compound walls including all incidental and operational charges etc complete as directed by the departmental officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Excavation in Hard rock (blasting prohibited) with benching,chiselling and wedging such as hard rock, sheet rock and boulders in habitant areas where controlled blasting can not be done with different lifts as per specifications and drawings and as directed by the departmental officers, including protecting walls and other structures , existing water supply lines, sewers, power cables, telephone cables/ducts, storm water drains, traffic signals etc., wherever it is possible so as not to distrub the existing utility services etc., taking all precautionary measures in the restricted areas such as urban areas diversion of the traffic,removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and excluding backfilling for Pipe line trenchs, including all incidental and operational charges etc complete as directed by the departmental officers.

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Earthwork excavation and depositing on the bank in all types of soils like black cotton soil, red earth and ordinary gravel, hard gravelly soils, mixture of gravel, soft disintegrated rock, hard disintegrated rock, Conglomerated rock, stoney earth and earth mixed with fair size boulders except rock requiring blasting with different lifts as per specifications and drawings and as directed by the departmental officers including protecting the walls and other structures, existing water supply lines, sewers, power cables, telephone cables/ducts, storm water drains, traffic signals etc., wherever it is possible so as not to distrub the existing utility services etc., taking all precautionary measures in the restricted areas such as urban areas including diversion of the traffic, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and excluding backfilling for Valve chambers and Thrust Block, for foundation of building, GLSR,ELSR and compound walls including all incidental and operational charges etc complete as directed by the departmental officers

Manufacturing, supply, delivery, Lowering, laying, jointing, testing and commissioning of 600 MS lin;Cutting open BT road surface(as well as asphalt concrete upto 75 mm thick )including water bound macadam including labour charges all leads , lifts and conveyance of all materials etc complete as directed by the departmental officers for pipeline trenches.