Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply, Delivery, Fixing and trial run of 415 V 3 Phase neutral cubical switch gear panel board for operating 2 Nos of 25 10 HP Pump set with the panel shall be cubical in size made from 16 G CRC sheet flush front mounted with individual compartment and efficient earthed neutral , all accessories to IS specification & amps; IE rules panel painted with seven ? tank processes powder coated paint. The panel shall have Aluminium bus bar with PVC heat shrink sleeves, internal wiring with copper control cables including cost of fabrication, assembling cost and conveyance of material, loading, unloading, transportation with all incidental and operational charges, duties and hinged the following items, star delta starter with relay range 16-21 amps, contractors, timers setting device with contractors, auto/manual start switch, single phasing preventor, reverse powerpreventor, start- stop switch, voltmeter, ammeter, CT, PT, contactors, selectors switch rotary type, indicating lamp, internal PVC insulated power wiring, lugs, ports, sealing, fasteners, fixing holders, nuts, bolts, washers, main switch board, 63 Amps capacity, kit-kat fuses, rewireable type, top and base porcelain based material, complete with fuses, knife switch, board made with steel sheet, cables multi-strand flexible cable, ISI make copper conductor wire, capacity of 63 Amps and capacity of 40amps complete the main control panel board complete, and its entire related works complete. As directed by the departmental officers. .( To Suit 25 HP Motor & Air Blowers).

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and laying of ASHIRVAD CPVC pipes and fittings or equivalent for hot & cold confirming to IS 15778:2007 with malleable specials such as tees, elbows, check nuts, unions, bushes etc., solvent cement including fixing in walls, ceilings, floors include for necessary excavation in all sorts of soils, chiselling in the walls etc., refilling consolidation with the excavated earth and making good the chiselled surface in cement mortar and complete when making a transition use metal threads fittings, including all for finished item of work etc complete as directed by the departmental officers.a) 15.90 mm OD pipe SDR 13.5-280 Rmt, b) 28.60 MM OD pipe SDR 13.5 -80 Rmt, c) Elbow 90 deg with reducer of 22.20x15.90mm -100 Nos, d) Elbow 90 deg of 28.60 mm -100 Nos, e) Tees 28.6x28.6x28.6 mm -80 Nos, f) Bushes 28.60mm OD -100 Nos, g) bushes 22.2x15.9mm OD-100 Nso, H) Thread Nipples -28.60mm OD -100mm .

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply of MS fittings medium grade properties and weight as per ISI 1239 such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for MS bends, union and MS connectors with check out and socket swastik make or equivalent etc., complete as directed by the departmental officers.a) 150mm dia pipe of 4 mm thick i) Tees 150x150x100 - 1 No, ii) Tees 150x150x80-3 Nos, iii) Elbows 90 deg -8 Nos iv) Flanges-4 Nos, v) Bolts, nuts, gaskets and washers ( for above items )- 1 No. b) 100mm dia pipe of 4 mm thick vi) Tees 100x100x100-1 No, vii) Tees 100x100x80-4 Nos, viii) Elbows 90 deg- 8 Nos, ix) Flanges -4 Nos, x) bolts, nuts , gaskets and washers ( for above items)- 1 No, c) 80 mm dia pipe of 4 mm thick iv) Tees 80x80x80-1 No, v) Elbows 90 deg- 5 Nos, vi) Flanges -4 Nos, vii) bolts, nuts , gaskets and washers ( for above items)- 1 No.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and fixing of MS pipe medium grade properties and weight as per IS 1239 with fittings such as elbows, tees, coupling, nipples, plugs, including excavation for trenches complete except for MS bends, union and MS connectors with check out and socket Jindal make or equivalent etc complete as directed by the departmental officers.a) 150mm dia pipe of 4mm thick -45 Rmt, b) 100mm dia pipe of 4 mm thick- 35 Rmt,c) 80mm dia pipe of 4mm thick -15 Rmt.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Transportation charges, loading & unloading and stacking charges of materials such as MS structural steel at site and all materials etc complete as directed by the departmental officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and delivery of structural steel supporting system for aeration pipes & fitting for diffusers at various locations of raw water in Phase-II of WTP, Kalabgoor including cost of materials, labour charges, hire charges of welding & cutting machines, generator hire charges and including operational & incidental charges etc., complete as directed by the departmental officers. a) 75X40X7.3mm for ?C? Channel frame for stilling chamber and compressor foundation.- 250 kgs b) 50X50X6mm for ?L? angle framefor distribution chambers, flash mixture and PST out-flow channel- 1000 kgs C) 40X40X6mm for ?L? Angle frame for distribution chambers, flash mixture and PST out-flow channel - 750 kgs

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Design Manufacture , Supply and Delivery at site of Air Compressor ( Blower), make Everest transmission or equivalent confirming to relevant IS standard with a capacity of 1000 cubic meter per hour of pressure 0.50kg/cm2 with continuous duty operation including TEFC motor ( Totally enclosed fan cooled) make Kirloskar or equivalent make of 25 HP motor including MS base frame, coupling, suction silencer, foundation, bolts, anti-corrosive painting etc., including transportation, loading, unloading, CED and complete as directed by the departmental officers

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Manufacture, Supply, Delivery and Fixing pressure guage confirming to IS 1095/1991 including transportation, CED complete as directed by the Departmental Officers

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Manufacture, Supply and delivery of Ball valves confirming make ZOLOTO , ISI mark or equal including transportation, CED etc complete as directed by the Departmental Officers.a) 100 mm dia valve PN-1.0 -3 Nos,b) 80mm dia valve PN-1.0-4 Nos, c) 65mm dia valve PN-1.0-6 Nos, d) 50mm dia valve PN-1.0-4 Nos, e) 40mm dia valve PN-1.0-5 Nos,f) 25mm dia valve PN-1.0-20Nos

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Manufacture and Supply of Air Release ? Valve suitable for compressed air at a flow of 1000 cum/hr at 0.70 Bar pressure , PN -1 Bar rating , complete with painting at 200 Microns , Spring loaded Air pressure Release valve make EVEREST Valve or equal complete manufactures in accordance with IS relevant standards, all for finished item of work etc complete as directed by the Departmental Officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply of GI Pipe Medium Grade properties and weight as per IS 1239 with GI Fittings such as Elbows , Tees Couplings, Nipples , Plugs, including excavation for trenches and Re-filling the Trenches complete except for GI Bends , Union and GI Connectors with check out and socket TATA or ZINDAL or Equivalent etc complete as directed by the Departmental Officers.(a) 65mm dia i) Tees 65x65x25 -5Nos, ii) Elbows 90 Deg-20 Nos, iii) Reducers 65x40mm - 4 Nos, b) 50mm dia pipe i) Tees 50x50x50 -25Nos, ii) Tees 50x50x25-20 Nos iii)Elbows 90 Deg-15 Nos, iv) Reducers 50x25mm - 3 Nos, c) 40mm dia pipe i) Tees 40x40x40 -8Nos, ii) Tees 40x40x25-15Nos iii)Elbows 90 Deg-15 Nos, iv) Reducers 40x25 - 30 Nos, d) 25mm dia pipe i) Tees 25x25x25 -45 Nos, ii) Elbows 90 deg -30 Nos iii) Nipples 25 mm -180 Nos, iv) Union Joints 25 mm -130 Nos)

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and Fixing of GI Pipe medium grade properties and weight as per IS 1239 with GI Fittings such as Elbows, Tees Couplings, Nipple, Plugs, including excavation for trenches and Re-filling the Trenches complete except for GI Bends, Union and GI Connectors with check out and socket TATA or ZINDAL or Equivalent etc complete as directed by the Departmental Officers.(a) 65mm dia pipe -40mtrs, b) 50mm dia pipe-60 mtrs, c) 40mm dia pipe-130 mtrs, d) 25mm dia pipe -100 mtrs)

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply, Delivery at Site, Installation and Testing and Commissioning of Non Clog Type Fine Bubble EPDM Tubular Diffusers of 65 mm OD in 615 mm length confirming to IS Standard complete with stainless steel Nipple and Clamps at both ends including cost of materials, cost towards packing and forwarding, labour charges, necessary consumables etc and operational and incidental charges etc complete as directed by the Departmental Officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Providing Air Diffusers (Fine Bubble) at MWSS Phase-II, WTP Kalabgoor under Kalabgoor Section, SD-I , Kalabgoor, O& M Dn- VIII, Patancheru . (Slice - II)

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Testing and Commissioning of two air blower and 25 HP motors sets duly providing electrical cable connections to motor testing with tong tester for idle run and trail run motor run motor on load including supply, fixing of 10sqmm 3 core copper armoured PVC sheeted cable duly laying and crippling the lugs and connection including cable trays with hinged etc., complete including the cost and conveyance , labour charges, transportation to site, transit risk etc complete as directed by the departmental officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;RCC Foundation for Installation of Compressor :RCC 1:11/2:3 with 6 to 20mm grade HBG metal including cost of material, labour charges, curing and all other incidential charges etc., complete as directed by the departmental officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Fabrication of all supports anti-corrosive painting in two coats, installation and fixing of structural steel supporting nut & bolts system for aeration pipes & fittings for diffusers at various locations of raw water in phase-I of WTP, Rajampet including cost of materials, labour charges, hire charges of welding & cutting machines generator hire charges and including operational and incidential charges etc complete as directed by the departmental officers

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply, Delivery, Fixing and trial run of 415 V 3 Phase neutral cubical switch gear panel board for operating 2 Nos of 25 10 HP Pump set with the panel shall be cubical in size made from 16 G CRC sheet flush front mounted with individual compartment and efficient earthed neutral , all accessories to IS specification & amps; IE rules panel painted with seven ? tank processes powder coated paint. The panel shall have Aluminium bus bar with PVC heat shrink sleeves, internal wiring with copper control cables including cost of fabrication, assembling cost and conveyance of material, loading, unloading, transportation with all incidental and operational charges, duties and hinged the following items, star delta starter with relay range 16-21 amps, contractors, timers setting device with contractors, auto/manual start switch, single phasing preventor, reverse power preventor, start- stop switch, voltmeter, ammeter, CT, PT, contactors, selectors switch rotary type, indicating lamp, internal PVC insulated power wiring, lugs, ports, sealing, fasteners, fixing holders, nuts, bolts, washers, main switch board, 63 Amps capacity, kit-kat fuses, rewireable type, top and base porcelain based material, complete with fuses, knife switch, board made with steel sheet, cables multi-strand flexible cable, ISI make copper conductor wire, capacity of 63 Amps and capacity of 40amps complete the main control panel board complete, and its entire related works complete. As directed by the departmental officers.( To Suit 25 HP Motor & Air Blowers).

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and laying of ASHIRVAD CPVC pipes and fittings or equivalent for hot & cold confirming to IS 15778:2007 with malleable specials such as tees, elbows, check nuts, unions, bushes etc., solvent cement including fixing in walls, ceilings, floors include for necessary excavation in all sorts of soils, chiselling in the walls etc., refilling consolidation with the excavated earth and making good the chiselled surface in cement mortar and complete when making a transition use metal threads fittings, including all for finished item of work etc complete as directed by the departmental officers. a) 15.90 mm OD pipe SDR 13.5-200 Rmt, b) 28.60 MM OD pipe SDR 13.5 -50 Rmt, c) Elbow 90 deg with reducer of 22.20x15.90mm -75 Nos, d) Elbow 90 deg of 28.60 mm -80 Nos, e) Tees 28.6x28.6x28.6 mm - 60 Nos, f) Bushes 28.60mm OD -80 Nos, g) bushes 22.2x15.9mm OD-80 No, H) Thread Nipples -28.60mm OD -70mm .

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply of MS fittings medium grade properties and weight as per ISI 1239 such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for MS bends, union and MS connectors with check out and socket swastik make or equivalent etc., complete as directed by the departmental officers a) 150mm dia pipe of 4 mm thick vi) Tees 150x150x100 - 1 No, vii) Tees 150x150x80-3 Nos, viii) Elbows 90 deg -8 Nos ix) Flanges-4 Nos, x) Bolts, nuts, gaskets and washers ( for above items )- 1 No. b) 100mm dia pipe of 4 mm thick i) Tees 100x100x100-1 No, ii) Tees 100x100x80-3 Nos, ii) Elbows 90 deg- 5 Nos, iv) Flanges -3 Nos, v) bolts, nuts , gaskets and washers ( for above items)- 1 No, c) 80 mm dia pipe of 4 mm thick i) Tees 80x80x80-1 No, ii) Elbows 90 deg- 3 Nos, iv) Flanges -3 Nos, v) bolts, nuts , gaskets and washers ( for above items)- 1 No.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and fixing of MS pipe medium grade properties and weight as per IS 1239 with fittings such as elbows, tees, coupling, nipples, plugs, including excavation for trenches complete except for MS bends, union and MS connectors with check out and socket Jindal make or equivalent etc complete as directed by the departmental officers. a) 150mm dia pipe of 4mm thick -25 Rmt, b) 100mm dia pipe of 4 mm thick- 15 Rmt,c) 80mm dia pipe of 4mm thick -10 Rmt.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Transportation charges, loading & unloading and stacking charges of materials such as MS structural steel at site and all materials etc complete as directed by the departmental officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and delivery of structural steel supporting system for aeration pipes & fitting for diffusers at various locations of raw water in Phase-I of WTP, Rajampet including cost of materials, labour charges, hire charges of welding & cutting machines, generator hire charges and including operational & incidental charges etc., complete as directed by the departmental officers. A) 75X40X7.3mm for ?C? Channel frame for stilling chamber and compressor foundation. - 200 kgs B) 50X50X6mm for ?L? angle frame for distribution chambers, flash mixture and PST out-flow channel.- 800 kgs C) 40X40X6mm for ?L? Angle frame for distribution chambers, flash mixture and PST out-flow channel.- 400 kgs.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Design Manufacture , Supply and Delivery at site of Air Compressor ( Blower), make Everest transmission or equivalent confirming to relevant IS standard with a capacity of 1000 cubic meter per hour of pressure 0.50kg/cm2 with continuous duty operation including TEFC motor ( Totally enclosed fan cooled) make Kirloskar or equivalent make of 25 HP motor including MS base frame, coupling, suction silencer, foundation, bolts, anti-corrosive painting etc., including transportation, loading, unloading, CED and complete as directed by the departmental officers

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Manufacture, Supply, Delivery and Fixing pressure Guage confirming to IS 1095/1991 including transportation, CED complete as directed by the Departmental Officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Manufacture, Supply and delivery of Ball valves confirming make ZOLOTO, ISI mark or equal including transportation, CED etc complete as directed by the Departmental Officers. a) 100 mm dia valve PN-1.0 -2 Nos,b) 80mm dia valve PN-1.0-3 Nos, c) 65mm dia valve PN-1.0-4 Nos, d) 50mm dia valve PN-1.0-3 Nos, e) 40mm dia valve PN-1.0-4 Nos,f) 25mm dia valve PN-1.0-10Nos

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Manufacture and Supply of Air Release ? Valve suitable for compressed air at a flow of 1000 cum/hr at 0.70 Bar pressure, PN -1 Bar rating, complete with painting at 200 Microns, Spring loaded Air pressure Release valve make EVEREST Valve or equal complete manufactures in accordance with IS relevant standards, all for finished item of work etc complete as directed by the Departmental Officers

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and fixing of GI pipe medium grade properties and weight as per IS 1239 with GI fittings such as Elbows, Tees, Nipples, Reducers, including excavation for trenches and re-filling the trenches complete with check out and socket TATA or Zindal or Equivalent etc., Complete. as directed by the departmental officers.(a) 65mm dia i) Tees 65x65x25 -4Nos, ii) Elbows 90 Deg-15 Nos, iii) Reducers 65x40mm - 4 Nos, b) 50mm dia pipe i) Tees 50x50x50 -15Nos, ii) Tees 50x50x25-13 Nos iii)Elbows 90 Deg-10 Nos, iv) Reducers 50x25mm - 2 Nos, c) 40mm dia pipe i) Tees 40x40x40 -6Nos, ii) Tees 40x40x25-10 Nos iii)Elbows 90 Deg-10 Nos, iv) Reducers 50x25 - 20 Nos, d) 25mm dia pipe i) Tees 25x25x25 -25 Nos, ii) Elbows 90 deg -20 Nos iii) Nipples 25 mm -120 Nos, iv) Union Joints 25 mm -100 Nos)

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply and Fixing of GI pipe medium grade properties and weight as per IS 1239 with GI pipe including excavation for trenches and re-filling the trenches complete except for GI bends , union and GI connectors with check out and socket TATA or Zindal or Equivalent etc., Complete. as directed by the departmental officers.(a) 65mm dia pipe -30mtrs, b) 50mm dia pipe-45 mtrs, c) 40mm dia pipe-100 mtrs, d) 25mm dia pipe -75 mtrs)

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Supply, Delivery at site, Installation and Testing and Commissioning of Non Clog Type Fine Bubble EPDM Tubular Diffusers of 65 mm OD in 615 mm length conforming to IS Standard complete with stainless steel Nipple and Clamps at both ends including cost of materials, cost towards packing and forwarding , labour charges necessary consumables etc and operational and incidental charges etc ., Complete. as directed by the departmental officers.

Providing Air Diffusers Fine Bubble at MWSS PhaseI Water Treatment Plant at Rajampet and MWSS Ph;Providing Air Diffusers (Fine Bubble) at MWSS Phase-I, WTP Rajampet Section, SD-I , Kalabgoor, O& M Dn- VIII, Patancheru . (Slice - I)