Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Electrical Work;supply, delivery and fixing of ISI ABC power MAP 2 KG Fire extinguisher mono ammonium phoshphate power 50,stored pressure type, pressure guage gross wt.8 kg,empty wt.3 kg,can H 449 mm,Diameter 150mm ,Discharge time less than 15 sec,controllable discharge mechanism, range min.4 mtrs applicable on classes A,B,C electrically started fires, A-rating 144A,B-rating 89B,can construction :Forging & Machining internal coating of Can Epoxy polyster poder coating,sheet metal thickness :1.80mm, Helium leakages detection tested,ISI & EN approved with 2 years warranty (Min/Safex/Reliance Make) including transportation, all taxes and all labour charges etc.complete.as directed by the Department Officers.

Electrical Work;Supply and laying of 25mmX6mm Gl strip from earth pit to switch gear unit including cost and conveyance of all materials etc., complete as directed by the departmental officers.

Electrical Work;Providing independent Earthing for sophisticated electrical & elecronic equipments with 600mm X 600mm X3.15mm thick copper plate fixed to 40mm G.I pipe of 3 Mts length connected with reducer providing GI funnel with wire mesh as natural elecronic code including CC chamber of size 400mm X 400mm X400mm covered with RCC slab filling with salt, charcol giving earth connection from electrode through G.I strip of 25mmx6mmx200mm length with all accessories and labour charges etc ..complete as per I.S specification 3043. complete as directed by the departmental officers.

Electrical Work;Providing end terminations to the 50 Sq.mm. copper lugs duly wrapping with insulation tapes including labour charges etc., complete as directed by the departmental Officers.

Electrical Work;Supply, delivery and laying of 50 Sq. mm. 3 core flexible copper cable Finolex/Finecab make from starter to motor in suitable size and lengths pvs pipe including digging laying as per IS specifications and giving connections labour charges complete as directed by the departmental Officers.

Electrical Work;Supply, delivery and fixing of Oil type pressure gauge (0 to 7kg/Pm2) monitary apparatus for reading the section and delivery pressure including cost and conveyance of materials viz. siphon pipe reducer and Zolto valve, labour charges etc., complete as directed by the departmental officers.

Electrical Work;Manufacture, supply and delivery of DI/D/F swing check valves slanted/straight seated with metallic, corrossion proof and wear resistant seat faces body and disc of ductile cast iron GGG-40SG iron 420/12, or equivalent grade as per IS 3896-Part -2-1985 and subsequent revisions, All the inside and outside of the body is to be coated with double coating of epoxy liquid.Drilled as per IS 1538.dimensions as per IS 5312 or equivalent codes.Including all taxes duties .Incidental and operational charges, PN 16.- 250mm dia valve

Electrical Work;Manufacture, supply and delivery of DI D/F gate valves (soft Seated) resillient seated soft sealing Gate Valve (Sluice valve) with body bonnet of ductile cast inron of grade GGG 40, SG 400/12 or equivalvalent grade as per IS 3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per Bs 5163 - 89/IS 14846 2000DIN 3202 F 4. All the valves should be with electrostatic power coating both inside and outside and with pocket less body passage. Drilled as per IS 1538. Including all taxes,excise duties,transportation, incidental and operational charges PN - 16. 200mm dia Sluice Valve.

Electrical Work;Manufacture, supply and delivery of DI D/F gate valves (soft Seated) resillient seated soft sealing Gate Valve (Sluice valve) with body bonnet of ductile cast inron of grade GGG 40, SG 400/12 or equivalvalent grade as per IS 3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per Bs 5163 - 89/IS 14846 2000DIN 3202 F 4. All the valves should be with electrostatic power coating both inside and outside and with pocket less body passage. Drilled as per IS 1538. Including all taxes,excise duties,transportation, incidental and operational charges PN - 16. 250mm dia Sluice Valve.

Electrical Work;Manufacturing, supply, delivery of following Ms-Specials of suitable thickness MS plate including cost of MS plate including cost of MS and its fabrication, coloring with eproxy on both sides cost and conveyance etc., complete - 200mm dia MS flanged with suitable thickness .

Electrical Work;Manufacturing, supply, delivery of following Ms-Specials of suitable thickness MS plate including cost of MS plate including cost of MS and its fabrication, coloring with eproxy on both sides cost and conveyance etc., complete - 250mm dia MS flanged with suitable thickness .

Electrical Work;Manufacturing. Fabrication, supply, delivery and fixing of 250mmX200mm dia MS Convergent (Tapper) of length (0.6) Mtr made with suitable thickness MS plate, including cost of fabrication, painting, finishing and labour charges complete materials complete etc., as directed by the departmental officers.

Electrical Work;Manufacturing and Supply, delivery, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes: Jindal Hissar /Tata pipes ( Laying from Suction end of the pump ) 250mm dia MS pipe with a length of (10) Mtrs, with suitable thickness

Electrical Work;Supply delivery testing and trail run of 75HP Cental panel to accommodate 400A, 3 pole manual draw out ACB as incomer for operating 75HP pumpset the panel shall be cubical of suitable size made from 16G CRC Sheet flush front mounted with individual compartment and efficient earthed neutral ,all accessories conforming to IS Specifications and IE rules,panel painted with seven tank process powder coated paint the panel should have suitable aluminium Bus bar with PVC heat shrink sleeve, internal wiring with copper control cables including cost of fabrication, assembling, loading, unloading transit risk upto destination with all incidental and operational charges etc..complete.the panel comprises the following materials:a) 400A 3 pole manual draw out L&T/C&S-INo.b) 250A TPN SFUL&T/C&S-2Nos c)100A TPN SFU L&T/C&S-2 Nos d) 32A MCBs-2Nos e)400A Al Bus bar PVC Sleeve insulated -4Nos.f)3 pole power contactor type MNX 110A ? 1 No., MNX140 ? 2 Nos., 415V 50Hz L&T Make-1No.h)Bimetallic Over Load Relay relay Type MN5 in L&T Make-2 Nos. i)0-100sec. Timer L&T Make-2 Nos.j) Push Button R&G 4Nos.k)LED Indication Lamp-2Nos. 1)0-500V voltmeter 3Phase Digital Enercon Make 3Nos.n)LED PHASE ON Indication lamp-3 Nos. o)40KVAR capacitor banks with ISI mark 1 No. p) auto power factor corrector and indicater as directed by departmental officers. HMWSSB Engineers.

Electrical Work;Supply, delivery, testing and trial run of new 75HP / 55 KW 1450 RPM squirrel cage TEFC induction motor of rating 415 volts, 50Hz, 3 phase Kirloskar/Crompton Greaves /ABB make including cost and conveyance of materials, taxes and operation charges and transits upto destination etc., complete as directed by the departmental officers.

Electrical Work;Supply, delivery, testing and trial run of new horizontal split case single stage centrifugal pump ?Model UP 150/38 B? in standard CI construction of Gun Metal /Red-Brass impellor, Shaft, Sleeves, Neck rings (i.e, alloy copper (88%), tin (10%), zinc with 200/150mm suction/delivery to discharge 330 Cum / Hr. at head 45 Mtrs of Kirloskar/M+P or its equivalent including conveyance of all materials, taxes and incidential operation charges and transits risk upto destination etc.. complete as directed the departmental officers

Electrical Work;Erection new base CC Bed as per standard requirements etc..complete as directed by the departmental officers.

Electrical Work;Providing Suitable MS base with MS channel for mounting both pump and motor duly assembling with proper alignment and fixing with a length of 2' X 1% dia 8 no's Bed Bolts, Nuts and washers with necessary fasteners including cost, conveyance and all materials and incidental, operational charges transits risk upto destination etc., complete as directed by the departmental officers.

Electrical Work;Dismantling and removing of an existing old 50 HP pumpset along with induction starter by disconnecting the Electrical Connection from motort, decoupling the pumpset breaking the old CC bed with compresser ,Base Frame and Cement concrete Bed at narayanaguda Pump room from the existing bed after de-screew the bolts, nuts and power cable connections and suction/delivery pipe lines i.e.,Suction End and Delivery End to MS Mainfold and removing of existing rusted holes Man fold ,valves, NRV's, tappers, control panel board...etc. including transportion from site to store room, including loading, unloading and labour charges etc. complete. as directed by the departmental officers.