Hyderabad Metropolitan Development Authority Tender

Item;Engaging Labour for assitance, e cleaning and lifting of debris, rubbish, unwanted material etc and carting away the same etc including loading, unloading, carting away etc and for other miscellaneous works etc including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply and transportation and laying of 4 core X 10 Sqmm XLPE insulated 1100V grade armored aluminium cable etc., including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply,Transportation and laying of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: DURA LINE (Dura Guard) / Bajaj / Gamson /Ultra Plus including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply & applying Of Duco Paint in Glossy/ Matt finish duly cleaning the surface, removing the old exisiting paint and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, includung applying Metal Primer and allowing it to dry over night and applying Two coats (2) of NC putty duly giving required gap between two coats using suitable knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, after the surface preparation and water cutting applying One coat of approved Duco Paint by spray, air-dry overnight, Sand again with 180 No. emery paper and removing dust, applying second coat of Duco Paint , air drying for 4 - 6 Hrs, Sand with 320 No emery paper, preparing the required finish etc., including access scaffolding charges till required heights, cost & labour charges, emery papers, cost of Metal Primer ,NC Putty, Duco Paint and other essentials etc of approved brands such as Esdee,Duco, Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Providing independent earthing for Important equipment with 40mm dia 'B'class 2.5m long G.I pipe and 19mm dia 'B'class G.I pipe of 0.3mtr. Long including labour and transportation charges with cost and conveyance of all materials including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Painting with 2 coats of ready mixed synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 30grams/Lit. over primer coat of first quality of approved make for new wood/concrete kerb work including cost and coneyance of all materials likr paint brushes etc. to site including all labour charges for prepration of surface painting etc including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Fabrication, Transportation, supply, errection and commissioning of hot dip galvanized octagonal pole with BSEN 10025 Grade S 355 Jo Steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with Bakelite sheet and MCB?s and making connections with inter connected wire leads and hinged door as per IS specification suitable to withstand the wind speed of 180 KMPH for 6.0 Mts height pole having dimensions bottom 130 mm, Top 70 mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long ?J? bolts along with template along with 1.0 Mtr length Single Arm decorative Bracket made with MS galvanized of 48.3mm dia of 3.2mm thick for main bracket and using 48.3mm dia of 3.2mm thick for supporting and providing Foundation and erection of octagonal pole duly erecting on standard template duly providing 4 No foundation bolts with nuts and providing M 20 grade CC work vibrated concreting mix with necessary steel reinforcement as directed by the engineer during execution including all labour charges and cost and conveyance of all materials etc complete as per the drawing enclosed etc complete for finished item of work. Foundation and erection charges with special T&P, for 6.0Mtr long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.55x0.55x1.2 Mtr size M20 cc and 100mm thick PCC with 1:4:8 work vibrated concreting mixing with necessary steel (14.72kgs) reinforcement as directed by the field engineers during execution including all labour charges and cost and conveyance of materials etc. complete in all soils.Makes: As per SSR 2024-25. including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Laying of Plain Cement concrete 1:2:4 nominal machine mixing with concrete mixture (Cement:Sand: Metal) as per IS 456 using 20mm size graded machine crushed hard granite metal (Course aggregate) from approved Quarry / source including cost and conveyance of all materials like Cement , sand, Metal, Water etc to side and inclusive of all materials all operational incidental , labour charges like machine , mixing placing of concrete compacting, curing, overhead charges and contractor profit etc excluding seigniorage charges etc. complete for foundations flooring footings bed etc.including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply,Transportation and Fixing 40W Post of fitting etc and including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply of 3 Mtr post top Poles (Decorative) including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Foundation and Erection of 3.0 mtr poles including cost and conveyance of all material and all labour charges etc. including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supplying and fixing of GI chainlink fencing of mesh PVC Coated size 50mm x 50mm x 8g incl. Tying the chainlink fencing to the MS IS T bars posts, horizontal ties and vertical struts with 2mm GI wire, conforming to IS 278 - 1978 and incl tack welding of the chain link fencing at 300mm - 400mm interval to the MS angle of vertcal posts vertcal sruts and top & bottom horizontal weldingwhere ever required. grinding smooth edges smooth fabrication hosting and installationall as per specification at all height etc, including painting with synthetic enamel, including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Cladding with Flamed/ bush hammered grey Granite slabs 25-30 mm thick slab set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth. the item is inclusive of cost and conveyance of all materials like granite, cement, sand and water & machine cutting etc to site and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

Item;Engaging Tractor for carting away of silt, rubbish, waste material dismantled material, debris, and other material etc including crew, oils, conveyance of machinery to site and all other incidental charges. including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply, Transportation and erection of 9W bollard (K-Lite Cat No:6956) with E27 holder and 9W warm white bulb with pole size 130X500 mm IP65, IK08 dia including Foundation cost and conveyance of material etc.,including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge. (Make: K-lite,Philips or other superior make)

Item;Supply & application of one coat water based cement primer, acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. of approved brand and shade, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply and transportation and fixing of IP-66 LED street light luminaire made out of high pressure die-cast aluminum housing with lumen output more than 6000 lumens and wattage not exceeding 60 W as per the technical specifications and on the bracket including making connections with 3CX1.5 Sqmm PVC flexible copper cable and the Guarantee shall be not less than 7 years complete for finished item of work. (LUMINAIRE MAKE : As per SSR 2024-25). including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Dismantlimg of existing poles etc., including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply, Transportation and fixing of 3 HP Three phase submersible Motor of approved make with fixing and Labour Charges, including removing of existing Motor etc and including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Earth work excavation of Trench in hard ground soil up to 0.9 mtr depth, laying of U.G cables upto 50 Sq,mm and back filling of Trench including cost and conveyance of materials and labour charges, etc including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Plain Cement concrete 1:4:8 nominal machine mixing with concrete mixture (Cement:Sand: Metal) as per IS 456 using 20mm size graded machine crushed hard granite metal (Course aggregate) from approved Quarry / source including cost and conveyance of all materials like Cement , sand, Metal, Water etc to side and inclusive of all materials all operational incidental , labour charges like machine , mixing placing of concrete compacting, curing, overhead charges and contractor profit etc excluding seigniorage charges etc. complete for foundations flooring footings bed etc.including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Earth work excavation for foundations and depositing on sides with all lifts and initial lead of 10.0 mts includingf all operational incidental, labour charges like shoring, sheeting planking, shuttering etc., complete by manual means upto 3mts depth in all soils, including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr). including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply, transportation and fixing of 3 HP Control panel Board of approved make including removing of existing panels etc and including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge..

Item;Supply and Erection of mild steel structural steel members like angles, channels, I sections etc incl tax duties, and all incidental and operational charges etc, including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified Grading II (13 mm nominal size), premixed with bituminous binder VG 30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic big paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects with all leads (MORTH 5.8) including lead and lift charges, Contractors profit and overhead charges but excluding Seigniorage Charges and taxes complete for fiished item of work and as directed by the Engineer-in-charge MoRT&H 509/5.8

Item;Providing and applying tack coat with Bitumen emulsion (RS-1) (Rapid Setting) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom including conveyance of bitumen emulsion round the trip as per Technical Specification Clause 503 MoRT&H ,/5.2 including lead and lift charges, all labour and material charges, Contractors profit and overhead charges but excluding Seigniorage Charges complete for finished item of work and as directed by the Engineer-in-charge.

Item;Supply, Transportation and fixing of 300x200x125mm thermo plastic pole box with din channel, 6-32A MCB-8No, 4way connector with suitable nuts & Bolts with connection etc with necessary cc work and earth work etc., including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.

Item;Supply, Transportation and fixing of star rated 20.00 HP 24-40 Stage Three phase ISI submersible motor pumpset suitable for 6" Bore well. Texmo / CRI / KSB / Aryenvarsha /Lubi / Falcon including fixing and labour charges and removing of existing motors etc including contractors profit and overhead charges but excluding seignorage charges complete for finished item of work and as directed by Engineer in charge.