Hyderabad Metropolitan Development Authority Tender

BOQ;Supply installation,testing and commossioning of 3 phase and neutral 415V free standing floor mounted Out door Type MV Panel made out of No.16/14 gauge CRCA sheet after 7 tankprocess and paintng with poweder coating.The panel shall consists of suitable rating TPN Aluminium (busbar with rating with DMC/SMC barriers and colour coaded with heat shrinkable sleeves,flexibility to accept the up four out going cables and necessary cable chamber.The panel shall have comprised of following switch gear. Including internal connections cost and conveyance of all materials and labour Charges. Incommer : 630A FP MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel |Mounted with spreader Terminals & Rotary Handle extended makes: L&T /Schneider/ Seimens/ Legrand.-1.No.

BOQ;Supply and laying 32x6mm Copper Plate / Strip / SWG wire No.8 /10 / 14

BOQ;Supply and laying of 50x6mm GI Strip

BOQ;Providing CTPT plinth 600mm x 600mm x2.1 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top duly plastered 20mm thick outsides including watering etc.,complete.

BOQ;Providing of Transformer Support Suaitable PSCC Pole as Per TSSPDCL Sepcification.

BOQ;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brickmassonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

BOQ;Providing independent earthing byexacavating a pit to a depth of 2.25Mtr inall soils as per size specified in the datafor Sophisticated Electronic equipmentwith 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

BOQ;End termination for 3.5 C X 240 SQ.MM CABLE Suitable.

BOQ;Earth work excacvation for 3CX95Sq.mm 11KV HT Cable

BOQ;Supply of 3.5C X 240 sq.mm XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Payal / RR kable / Beljin / Ollvin / Finecab / RPG / V - Guard / Orbit / Fortune Arrt / Gemscab / Bonton / SPM / Unistar / Windsor/ Avocab / Pawancab / Nakoda / Suncab

BOQ;Supply of 3C X 95 sq.mm HT XLPE (E) insulated 11000 V grade armoured Cable, as per IS specification confirming to IS 7098/II/85with latest amendments. Makes : Torrent / Unicab / Universal / Polycab / Havells / KEI / RPG / Gloster.

BOQ;Providing and erecting heat shrinkable indoor termination kit for 11 KV HT XLPE insulated armoured cable 3C X 95 Sq.mm with necessary materials etc., complete. Makes : Raychem / Transeal / M Seal

BOQ;Providing and erecting heat shrinkable indoor termination kit for 11 KV HT XLPE insulated armoured cable 3C X 95 Sq.mm with necessary materials etc., complete. Makes : Raychem / Transeal / M Seal

BOQ;Supply and Transportation of 500 KVA TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per IS:1180 OCTC with level - I with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes: Kirloskar / PETE / Esennar / Voltamp / Crompton / ABB / Schneider. 1. Quantity : 1 2. Rated KVA : 500KVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth. 5. Wound : Copper Double wound 6. Type : Core type oil immersed 7. Cooling : ONAN 8. Temp Rise : 40?C in oil, 45?C by resistance 9. Vector Group: Dyn 11 10. Primary Connection : Delta 11. Nominal Voltage / Current : ______ 12. Highest system Voltage: 12000V 13. Primary Frequency :50 HZ +/- 3% 14. Number of Phases : 3 15. Primary wires: 3 16. Secondary connection : Star 17. Secondary Volts / Current : 433V 18. Secondary phases : 3 19. Secondary wires: 4 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps) 27. Standrad Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs:Two c. Off-circuit tap switch :One d. Earthing Terminals :Two e. Radiators ( Attachable) :Adequate f. Explosion vent with Diaphragm :One g. Conservator with Drain plug:one h. Oil filling hole with cap :One i. Oil level indicator : One j. Dehydrating Silicagel Breather : One k. Terminal Arrangement: HV With Treminal Box l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Filter valve with blanking plate : One o. Drain cum filter valve with blanking plate : One p. Air release device : One q. Thermometer Pocket : One r. Four :Unidirectional flat rollers s. One :10Cm dial thermometer(Rigid stem type)

BOQ;Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick massonry chambers etc complete for finished item of work. a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring chargesd mechanis with 2 no + 2 NC.b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection., d) Indication lamps., e) Manual trip Push buttion. Make : Megawin / Pentagon /Venkateshwara / Jyothi.

BOQ;Supply , Fabrication, Transportation and fixing of Box type RS Joist pole made with 2 Nos 175X85 mm ( ISMB Modified ) or equivalent about 30'-0 length / 9.1mtrs length poles welded together including excavation of pit, coil earthing, Special T&P, painting of Pole with 1 coat of Red oxide and 2 coats of alluminium paint, CC 1:3:6 upto ground and 1:2:4 for Couping work, 200A AB Switch, HG fuse sets, required angle iron channels, clamps, nuts and bolts, 11KV pin insulators, 2Nos GI pipe earthings as per the IS with brick massonry chamber including labour and transportation charges etc., complete.

BOQ;Providing independent earthing for Important equipment with 40mm dia 'B'class 2.5m long G.I pipe and 19mm dia 'B'class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) etc., including transportation charges with cost and conveyance of all materials Complete for finished item of work and as directed by Engineer In Charge

BOQ;Earth work excavation of Trench in hard ground soil up to 0.9 mtr depth, laying of U.G cables upto 95 Sq,mm and back filling of Trench including cost and conveyance of materials and labour charges, etc Complete for finished item of work and as directed by Engineer In Charge

BOQ;Supply,Transportation and laying of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: DURA LINE (Dura Guard) / Bajaj / Gamson /Ultra Plus

BOQ;Fabrication. Transportation and Erection 14SWG CRCA sheet and labour charges for incoming 125A MCCB-1No, Outgoing 40A to 63A MCB ? 4No, 6A to 32A SPMCB-12Nos, metering unit etc., with stand necessary foundation work etc., including cutting, bending drilling, welding and reveting etc., complete with cleaning with 7 tank process and painting with powder coating including cost and conveyance of all materials etc., complete for finished item of work and as directed by Engineer-in-charge.

BOQ;Supplying, installation, testing & commissioning of cubical type IP 55 for outdoor type Distribution Panel for 415V, 3 Phase, 4Wire 50 Hz AC supply system fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable capacity extensible type TPN Copper bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 50KA for 1 Sec., bottom base frame angle of MS section not less than 50mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sq.mm. zero halogen fire retardant insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears. The panel shall be mounted on the suitable foundation etc., complete for finished item of work for High Mast feeder pillar .All cable glands should use double compressed gland only.

BOQ;Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr) (Data No. )

BOQ;Supply and run of 16 Sqmm 4Core XLPE insulated, 1100V grade armoured aluminums cable in the existing duct/conduit pipe as per specification confirming to IS:7098 (Part - I) in existing trench/wall including providing end terminations with glands. lugs , crimping job etc complete for finished item of work Makes: As per SSR 2021-22

BOQ;Supply and run of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminum cable in the existing conduit/duct pipe as per specification confirming to IS:7098 (Part - I) in existing trench/wall including providing end termination with glands. lugs , crimping job etc complete for finished item of work. Makes: As per SSR 2021-22

BOQ;Supply and run of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured aluminum cable in the existing conduit/duct pipe as per specification confirming to IS:7098 (Part - I) in existing trench/wall including providing end termination with glands. lugs , crimping job etc complete for finished item of work. Makes: As per SSR 2021-22

BOQ;Supply and transportation and fixing of IP-66 LED street light luminaire made out of high pressure die-cast aluminum housing with lumen output more than 17500 lumens and wattage not exceeding 140 W as per the technical specifications and on the bracket including making connections with 3CX1.5Sqmm PVC flexible copper cable and the Guarantee shall be not less than 7 years complete for finished item of work. (LUMINAIRE MAKE : As per SSR 2021-22)

BOQ;Supply and transportation and fixing of IP-66 LED flood light luminaire model (Integrated) with two LED modular or high pressure die-cast aluminum housing with lumen output more than 48000 lumens and wattage not exceeding 400W for 20Mtr High Mast with non dimmable drivers as per the technical specifications and on the bracket including making connections with 3CX 2.5 Sqmm PVC flexible copper cable and the Guarantee shall be not less than 7 years complete for finished item of work. Makes: As per SSR 2021-22

BOQ;Fabrication, transportation and supply and erection of 30 Mtrs Polygon High Mast with 20 sided with two sections of Bottom 4mm thick, and Top section with 3mm thick of Bottom 460mm and Top 150dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 670mm dia 25mm thick with its accessories. Mast shall be in 2 sections. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 3 point suspension system with steel rope 8 mm dia and 6mm dia 7/19 construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M 30 x 750 mm foundation bolts of required quantity with GLS type aviation twin lamp including junction box and lantent carrige with 10 no.s luminars fixing earth work excavation with a approximate quantity of 16.46 Cum for erection of 20 Mtrs high mast and refilling with a quantity of 0.78 Cum of PCC 3.85 Cum M 25 grade concrete and (166 Kgs) reinforced steel of 12mm / 10mm / 6mm, Soil bearing capacity of more than 10 T/Sqm, Anchor plate with cost and conveyance of all above materials & labour charges for erection of High Mast and Carriage with foundation as per the drawing enclosed with GLS type aviation twin lamp ,latent carriage suitable to fix as per lighting design up to Ten to fourteen luminaries etc complete for finished item of work as per the drawing enclosed..Makes: As per SSR 2021-22

BOQ;Fabrication, transportation and supply and erection of 20 Mtrs Polygon High Mast with 20 sided with two sections of Bottom 4mm thick, and Top section with 3mm thick of Bottom 460mm and Top 150dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 670mm dia 25mm thick with its accessories. Mast shall be in 2 sections. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 3 point suspension system with steel rope 8 mm dia and 6mm dia 7/19 construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M 30 x 750 mm foundation bolts of required quantity with GLS type aviation twin lamp including junction box and lantent carrige with 10 no.s luminars fixing earth work excavation with a approximate quantity of 16.46 Cum for erection of 20 Mtrs high mast and refilling with a quantity of 0.78 Cum of PCC 3.85 Cum M 25 grade concrete and (166 Kgs) reinforced steel of 12mm / 10mm / 6mm, Soil bearing capacity of more than 10 T/Sqm, Anchor plate with cost and conveyance of all above materials & labour charges for erection of High Mast and Carriage with foundation as per the drawing enclosed with GLS type aviation twin lamp ,latent carriage suitable to fix as per lighting design up to Ten to fourteen luminaries etc complete for finished item of work as per the drawing enclosed..Makes: As per SSR 2021-22

BOQ;Fabrication, Transportation, supply, errection and commissioning of hot dip galvanized octagonal pole with BSEN 10025 Grade S 355 Jo Steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with Bakelite sheet and MCB?s with making connections with inter connected wire leads and hinged door as per IS specification suitable to withstand the wind speed of 180 KMPH for 9mts height pole having dimensions bottom 190mm, Top 80mm with 3mm thick, base plate 280 x 280 x 20mm and 4 Nos of M 30 x 1000 mm long ?J? bolts along with template along with 1.5 Mtr length Single Arm standard type Bracket made with MS galvanized of 60.3mm dia of 3.6mm thick for main bracket and using 48.3mm dia of 3.2mm thick for supporting and providing Foundation and erection of octagonal pole duly erecting on standard template duly providing 4 No foundation bolts with nuts and providing M 20 grade CC work vibrated concreting mix with necessary Steele enforcement as directed by the engineer during execution including all labour charges and cost and conveyance of all materials etc complete as per the drawing enclosed etc complete for finished item of work. Foundation and erection charges with special T&P, for 9Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.80Mtrx0.80Mtrsx1.50 Mtr size M20 cc work vibrated concreting mixing with necessary steel (27.27kgs) reinforcement as directed by the field engineers during execution including all labour charges and cost and conveyance of materials in all soils incl rock etc. complete including champion make 75mm hose pipe 2.0Mtrs for cable entry and complete finished item of the work. . Makes: As per SSR 2021-22