Hyderabad Metropolitan Development Authority Tender

ITEM;Construction of granular sub-base by providing well graded / Close Graded (Grade I) material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site upto lead of 1000 m spreading in uniform layers with motor grader on prepared surface and compacting with smooth wheel roller 80-100 kN to achieve the desired density, complete as per Technical Specification Clause 401 RBR-SBBS-1 (Plant Mix Method) contractors profit & overhead charges but excluding seigniorage charges

ITEM;Cement brick Masonery in CM 1:6 (Cement :Sand) mix using bricks of 23x11x7Cms size having a minimum compressive strentth of 50 Kg per Sqm including cost and conveyance of all materials, like cement, sand, water, bricks, etc to site including taxes on all materials all operational incidentals, labour charges curing contractors profit & overhead charges but excluding seigniorage charges etc Complete for finished item of work and as directed by Engineer In Charge.

ITEM;Desinging,Fabrication, supply,Transportation, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 3.2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid alluminiun strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for out going each floor set complete with following in coming and Outgoings, suitable for operation on 415v, phase, 50hz ac supply. make of L&T/siemens INCOMING : 125A, 50kA 3 Pole MCCB 1 nos Digital Voltmeter 0-500V with selector switch 1 no Digital Ammeter (0-125 A) with selector swtich & CTs etc. 1 no LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps 1set Set of alluminiun Bus out going 150 amps outgoing 63amp MCBTP 2 nos 32 AMp MCB single pole 12 no timer with centralized controlling monitory system and 100amps 4 pole contractor and provision of 3 phase meter energy meter including all labour chagers etc completed for finished item of work as directed by Engineer-in-charge.

ITEM;Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using Hard Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing, Overheads and contractor profit etc., excluding Seigneorage Charges complete for finished item of work for foundation and basement

ITEM;Plastering with CM (1:5), 20 mm thick single coat including cost and conveyance of all materials like cement, sand, water etc. to site, exclusive of seigniorage charges, inclusive of all operational, incidental , labour charges like mixing, placing, curing etc, overhead charges complete for finished item of work and as directed by Engineer In Charge.

ITEM;Refilling with useful available excavated earth / soils in trenches, sides of foundations & basement and the pipeline treanches after laid, jointed, executed, tested with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering consolidating each layer by watering and ramming including cost and coveyance of water to work site and all operatinal, incidental, labour charges, hire charges at T&P, overhead charges but excluding seigniorage charges complete for finished item of work and as directed by Engineer In Charge

ITEM;Flooring with cobble stones 150x150x100mm size set over CM 1: 8 bed of existing CC Bed or masonery bed already laid including site all operational incidentials labour charges like dressing of stones, laying, curing etc, including Contractor's and overhead charges but excluding seigniorage charges, complete for finished item of work and as directed by the Engineer-in-charge.

ITEM;Providing Polyurethene (PU) painting to ornamental cast iron railing by SHOT blasting process and properly cleaned and subsequently grinded for a better look and smooth surface finish. further all parts are painted in 4 layered spray coating with an over all thickness 120 microns in which first layer with epoxy primer to prevent corrossion and the second layer with epoxy base colour and the third layer with metallic polyurethene (PU) paint (Gold / green / copper / silver/black) and the final layer with Polyurethen lacquer as instructed by the Engineer-in-charge, including all operational, incidental, labour charges, scaffolding charges, safety nets, safety belts, cost and coonveyance of material etc including contractor's profit and overhead charges and complete for finished item of work as directed by Engineer-in-charge.

ITEM;Providing and fixing ornamental cast iron grills for railing including cutting and fabricating to required sizes and shapes placing in position as per approved designs and drawings. The decorative parts made of cast iron castings must be of FG-150 grade as per IS-210 (2009) standard, hardness must be in range between 130 BHN to 180 BHN. Cast iron must have chemical composition of carbon 3.0% to 3.8%, Silicon1.5% to 2.0%, Magnesiu 0.5% to 0.7%, Sulpher 0.02% to 0.04% & Phosperous 0.07% to 0.09% this composition is best suitable for product strength and life. the decorative ornamental C.I decorative pillars should structurally strong to take full structural load. In proess of pillar casting there should be 3 core holes of round 50 mm on equal intersection of the decorative pillar. The center most core holes should be packed with cast iron decorative embellishement / covers for better look. The decorative pillars in round shape with decorative cronies designs & above it is having antique embellishments. It will be fixed with suitable foundation bolts in existing RCC foundation Railing: including cost and conveyance of all cast iron sections and all wastages such as overlaps, couplings etc and all operational, incidental charges including labour charges for fabricating all heavy cast iron works including cost of welding rods, power charges etc and labour charges for fixing and erecting and fixing in position by using chain pulley blocks, Derek pole aggangements and cranes etc including overheads and contractor's profit complete for finished item of work as directed by Engineer-in-charge.

ITEM;Manufacture, Supply and delivery of Unplasticised PVCs Pipes of dia 315 mm 6.0 kg/sqcm conforming to IS : 4985/2000 (third revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere Testing of Pipelines with required pressure as per relevant IS Specification including filling with water with a water lead upto 500 M, including hire charges of testing equipment and labour, Materials needed for testing (as per Sub Analysis 2 A) PVC Pipes for water supply & Electrical cables (including laying ,jointing and testing charges), overheads & contractors profit complete etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Supply and fixing of Pre-Cast CC Flat blocks (600 X 300 X 100mm) true to its alignment as specified by the Dept. to form divider including pointing with cement motor (1:3) prop. Cost and conveyance of all materials like cement and water etc., made with rubberized modules of M30 grade Design Mix with 350 Kgs cement / Cum of Concrete, 20mm to 6mm nominal size (SS 5) Hard Granite machine Crushed metal @ 0.80 cum/cum. Of concrete and sand @ 0.40 cum/cum of concrete for RCC works including cost and conveyance of all materials like cement sand coarse aggregate water etc., to site, labour charges for mixing, laying concrete, tamping, vibrating, lifting, curing finishing top surface including hire charges of machinery and vibrator complete for finished item of work and transportation of Pre-Cast CC Flat blocks from casting site to work site of each 0.6m length (CC block as per design & specification),overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Supply and Laying with Honed black Granite slabs 25-30 mm thick slab each slab not less than 2.5'x1' over base coat of of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth. the item is inclusive of cost and conveyance of all materials like granite, cement, sand and water etc to site and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Supplying and fixing of M-20 Grade precast utility chambers of size(0.6x0.3x0.4(ht)) with a cage welded reinforcement 8mm dia 200mm c/c of 125mm wall thickness at bottom and 45mm wall thickness on top with a provision for tees including all labour charges, transportation, incidental,operational charges ,fixing in position overhead charges and contractors profit complete etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Laying of 1:2:4 Nominal mix proportion by concrete mixer (cement: fine aggregate: Coarse aggregate) using 6 to 20 mm and down size Hard Granite macine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, exclusive of seigniorage charges, inclusive of all operational incidental , labour charges like machine , mixing, placing of concrete, compacting, curing, overhead charges and contractors profit complete etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Supply and fixing of M20 grade precast storm water drain chamber of size 0.6X0.3 depth is 0.34m with a cage welded reinforcement 6mm dia 80mm c/c of 75mm wall thickness including a provision of 180mm drained for drain pipe including all labour charges, transportation charges incidental operational charges, fixing in position over heads & contractor's profit etc but excluding seigniorage complete for finished item of work as directed by Engineer-in-charge.

ITEM;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 with minimum cement content of 330 Kgs per 1 Cum using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc.,centering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc including all operataional and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of over heads & contractor's profit etc but excluding cost of steel and its fabriation charges and excluding seigniorage charges complete for finished item of work as directed by Engineer-in-charge. (APSS No 402) (For Pedestral)

ITEM;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 with minimum cement content of 330 Kgs per 1 Cum using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc.,centering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc including all operataional and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of over heads & contractor's profit etc but excluding cost of steel and its fabriation charges and excluding seigniorage charges complete for finished item of work as directed by Engineer-in-charge. for Grade slab/Slab resting on ground

ITEM;Supply and spreading of stone crusher dust (HBG stone chips 2.36 mm and below ) not more than10% passing 0.075 sieve for resting the pavers and filling the voids and crevices between the pavers, including cost and coveyance of all materials to site, leads, lifts, and labour charges, overheads & contractors profit excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Supply, laying and fixing of machine cut natural dressed granite kerb perfect to the size of 1000 mm x 300 mm x 75mm jointing with cement mortor 1:3 including cost and conveynace material and labour charges complete etc., and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Supply, laying and fixing of saucer drain of size 600mmx300mmx60mm (varying 40 to 60mm thickness) of M40 GRADE jointing with cement mortor 1:3 including conveynace and labour charges complete etc.,and overheads & contractors profit excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Providing Grooves 2-3mm of granite slab of any thickness of granite slab for ornamental appearance including cost of labour charges, overheads & contractors profit complete etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Providing full rounding the edges of any thickness of granite slab without polishing for ornamental appearance including cost of labour charges and overheads & contractors profit complete etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Skirting with Flamed/ bush hammered grey Granite slabs 25-30 mm thick slab set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth. the item is inclusive of cost and conveyance of all materials like granite, cement, sand and water etc to site and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;Supply and Laying with Flamed/ bush hammered grey Granite slabs 25-30 mm thick slabof size around 5'x2.5' to suit the design over base coat of of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth. the item is inclusive of cost and conveyance of all materials like granite, cement, sand and water etc to site and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

ITEM;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 with minimum cement content of 330 Kgs per 1 Cum using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc.,centering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc including all operataional and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of over heads & contractor's profit etc but excluding cost of steel and its fabriation charges and excluding seigniorage charges complete for finished item of work as directed by Engineer-in-charge. (APSS No 402) (For Plinth beam)

ITEM;Providing concrete for plain concrete of Grade M-10 in open foundations using 20 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.excluding seigniorage and including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Supply and Transportation of Outer dia 63mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: DURA LINE (Dura Guard) / Bajaj / Gamson / Ultra Plus (Electrical SSR 4.9.1 (b)) including overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Supply and Transportation of Outer dia 50mm and Inner dia 38mm.. double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: DURA LINE (Dura Guard) / Bajaj / Gamson / Ultra Plus (Electrical SSR 4.9.1 (a)) including overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Supply and fixing of high performance expansion joint filler board conforming to IS: 1838 - 25 mm THICK, using mastic pad of (25mm) thick including cost and conveyance of all materials to site and labour charges, including all incidental, operational & all labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Supply and fixing of MS structral steel,angles, channels, MSJ bolts for electrical poles/ railing including cost of material, welding rods power charges fixing in position as per approved designs and drawings including cost and conveyance of bolts from approved source to site of work with all operational incidental and labour charges such as cutting bending placing in position etc., including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.( APSS No.126)

ITEM;Manufacture, Supply and delivery of Unplasticised PVCs Pipes of dia 160 mm 6.0 kg/sqcm conforming to IS : 4985/2000 (third revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere Testing of Pipelines with required pressure as per relevant IS Specification including filling with water with a water lead upto 500 M, including hire charges of testing equipment and labour, Materials needed for testing (as per Sub Analysis 2 A) PVC Pipes for water supply & Electrical cables (including laying ,jointing and testing charges) including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Carting away the surplus excavated earth/dismantled material/unwanted debris etc, from the work site with a lead of 20.0 km including initial lead including all incidental, labour charges, overheads and contractors profit and also loading& unloding and conveyance etc. Complete for finished item of work and as directed by Engineer in charge.

ITEM;Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 MORD / MORTH - By Mechanical Means and including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately etc, complete for finished item of work as per Technical Specification Clause 202 MORD / MORTH and including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH excluding seigniorage and including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Dismantling of the existing Grill with vertical of any height by manual means and disposal of dismantled material with all lifts and upto a lead of 1000 m, stacking serviceable materials and unserviceable materials separately as per Technical Specification Clause 202 MORD / MORTH and additional carting of 2 Km including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

ITEM;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage , dewatering charges etc as per SS - 20 B (APSS 308). complete for Ordinary Soil-Manual Means-Upto 3 m depth complete for finished item of work including all incidental, labour charges, overheads and contractors profit etc and as directed by Engineer in Charge.

ITEM;Dismantling of 75mm thick Bangalore/Rudraram stone flooring, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m and additional carting of 2 Km as per Technical Specification Clause 202 MORD / MORTH including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.