Hyderabad Metropolitan Development Authority Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
445195Bid Award Id
ViewTender No
HMDA/DEV/CE/13/01/2023-24, Dt:26-07-2023Tender Authority
Hyderabad Metropolitan Development Authority ViewPurchaser Address
-Website
http://https://hmda.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
ITEM;Supplying and fixing of SWR PVC pipes ( Prince/Sudhakar/Kisan/Supreme/ Astral/ Finolex/ Ajay/ Ashirvad/Birla Aerocon/TRUFLO by Hindware/Prayag Polymer, Watertec, Austro, Nandi/ APOLLO PIPES LTD / DEC Industries PVT LTD/Vectus/Suki, Flowkem ) 10 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for 110mm OD
125
273
34180
ITEM;Supplying and fixing of SWR PVC pipes ( Prince/Sudhakar/Kisan/Supreme/ Astral/ Finolex/ Ajay/ Ashirvad/Birla Aerocon/TRUFLO by Hindware/Prayag Polymer, Watertec, Austro, Nandi/ APOLLO PIPES LTD / DEC Industries PVT LTD/Vectus/Suki, Flowkem ) 10 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for 63mm OD
25
170
4251.25
ITEM;Providing one set Floating lane roller including cost and conveyance of all materials, all operational, incidental, and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make
1
235000
235000
ITEM;Providing Floating lane divider made of Polypropylene including cost and conveyance of all materials, all operational, incidental, and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make
125
2500
312500
ITEM;Providing Jumping boards/Starting Blocks fabricated out of SS 304 with an antiskid finish on top including cost and conveyance of all materials, all operational, incidental, and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make
6
20000
120000
ITEM;Providing LED Type Underwater Lighting of 144W/12V DC with required drivers inclusive of transformers and fixing ,wiring for lights used is 2 sqmm up to the filter plant room including cost and conveyance of all materials, all commissioning, operational, incidental and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make
24
15000
360000
ITEM;Providing Pool Cleaning accessories and Maintenance Kit with suction sweeper made of SS 304 with 18? effective brush size, 2 HP self-priming Kirloskar pump mounted on a trolley for easy movement, along with bundle of hosepipe, necessary fittings and etc., 2 No's Pool cleaning brush, 2 No's Leaf Net, Ph and Chlorine Test kit 1 No and Telescopic Pole of 1 No including cost and conveyance of all materials, all operational, incidental, and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make
1
87750
87750
ITEM;Providing SS Ladders of SS 316 of 38.00mm OD with Non-Slippery rubber mats for Pool at required locations including cost and conveyance of all materials, all operational, incidental and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make. for Main pool-2
2
15000
30000
ITEM;Providing SS Ladders of SS 316 of 38.00mm OD with Non-Slippery rubber mats for Pool at required locations including cost and conveyance of all materials, all operational, incidental and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make. for Main pool-1
2
12000
24000
ITEM;Providing Grab rails/holding bars of SS 316 of 38.00mm OD with 4' length including cost and conveyance of all materials, all operational, incidental, and labor charges, etc., including overheads & contractors profit complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make
24
3956
94948.56
ITEM;Providing Grating Fabricated out of Polypropylene with the single central attaching system of 10? width. including cost and conveyance of all materials, all operational, incidental, and labor charges, etc., complete for the finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make including overheads & contractors profit
80
1575
126000
ITEM;Supply, Installation, Testing, and Commissioning of Monoblock Self-priming three phase centrifugal pumps of 5 HP capable of discharging 40 m3/hr @ 12-14m head for filter with a necessary union, flanges, foundation bolts, butterfly valves and foot valves with suitable panel board including cost and conveyance of all materials, all operational, incidental and labor charges, etc., complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make. including overheads & contractors profit
4
85000
340000
ITEM;Providing, erecting, and installation of the vertical sand filter of 1200mm dia fitted with pressure gauge, manual air breeder, water drain, and emptying plug fitted with collector arms and diffuser made from PVC filtration capacity of 40m3/hr/m2 with a working pressure of 2.5 kg/cm2 and flow rate 22m3/hr with 2"multi foot valve including cost and conveyance of all materials, all operational, incidental and labor charges, etc., complete for finished item of work. Make: Water Sign/Astral/Pentair or Equivalent make. including overheads & contractors profit
3
320000
960000
ITEM;Supply, transportation, and Installation of HIGH-PRESSURE LAMINATES - HPL Compact Laminates of 12 mm thickness of approved design/shade for Toilet Cubicles/Partitions including cost and conveyance of all materials and accessories to the site, including all operational, incidental, and labor charges for fixing in position, etc., overheads and contractor's profit complete.
200
6882
1376466
ITEM;Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make (HSW/Parry/Neycer) as approved by Engineer-in-charge, including supply and fixing 15 mm nominal size PVC connection with brass union nut C.P coated, 15 mm brass body CP finish self closing tap push type conforming to IS 1711, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.
7
5001
35009.31
ITEM;Providing and Placing on Terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work.
8000
11
90880
ITEM;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. for 28.60mm OD
75
284
21303
ITEM;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. for 22.20mm OD
50
237
11873
ITEM;Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for 110 mm dia
30
189
5680.8
ITEM;Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for 63mm dia
20
143
2878.4
ITEM;Supplying and fixing Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 7 - 10 years warranty with necessary fittings etc., complete including cost and conveyance of all materials, labour charges, overheads & contractor profit complete for finished item of work in all floors.
8
4003
32030.32
ITEM;Supplying and fixing 15 mm brass body CP finish self closing tap push type conforming to IS 1711 as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work in all floors.
4
338
1354.28
ITEM;Supplying and fixing of 25 mm nominal size dia and 609.6mm long aluminium anodized towel rod with brackets and aluminium screws including cost and conveyance of all materials, labour charges, overheads & contractors profit for finished item of work.
8
206
1654.24
ITEM;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges, overheads & contractors profit for finished item of work in all floors.
8
640
5126.32
ITEM;Supplying and fixing CP finish brass soap dish of approved make ISI quality with CP screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
8
707
5662.56
ITEM;Supplying & Fixing Indian make below counter Wash Hand Basin 1st quality with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block with single CP pillar cock including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work
8
5266
42128
ITEM;Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2-2004 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.
8
16875
135006.24
ITEM;Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
25
194
4850
ITEM;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
4
9870
39483.48
ITEM;Supply of 3 Core 4 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI /L&T ELEC-1.6.3 including overheads & contractors profit
600
200
120390
ITEM;Supply and fixing in place 40 mm dia HDPE(PE 100 grade) 12.5 kg/sqcm pipe inclusive of all labour and material charges including overheads & contractors profit complete for finished item of work and as directed by Engineer-In-Charge
500
110
55315
ITEM;Supply and fixing in place 180 mm dia PVC casing (sudhakar make, 6Kgs/cm2 )inclusive of all labour and material charges including overheads & contractors profit complete for finished item of work and as directed by Engineer-In- Charge
100
774
77414
ITEM;Supply and fixing in place 250 mm dia PVC casing (sudhakar make, 10 Kgs/cm2 )inclusive of all labour and material charges including overheads & contractors profit complete for finished item of work and as directed by Engineer-In- Charge
70
2430
170144.8
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 900-1000 Rft)
200
360
72000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 800-900 Rft)
200
310
62000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 700-800 Rft)
200
260
52000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 600-700 Rft)
200
220
44000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 500-600 Rft)
200
180
36000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 400-500 Rft)
200
150
30000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 300-400 Rft)
200
120
24000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 200-300 Rft)
200
100
20000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 100-200 Rft)
200
80
16000
ITEM;Providing of 6.5 inch borewell drilling including all operational, incidental and labour charges, conveyance of machinery to site, Overheads and Contractors Profit complete for finished item of work and as directed by Engineer -In - Charge(Depth 0-100 Rft)
200
70
14000
ITEM;Supplying and fabricating, erecting and fixing of Entrance Gate of approved design with structural steel of MS Hollow Sections.,complete as per the sketch enclosed including cost and conveyance of all materials, labour charges for erecting & fixing all structural steel works erecting in position and fixing complete in position, labour charges for fabrication, all incidental charges, overheads and contractor profit etc., complete for finished item of work as directed by the Engineer-in-Charge
322.57
159
51378.95
ITEM;Supply and Fixing of precast concrete blocks for paving of M 40 grade and thickness not less than 80 mm for Medium traffic areas confirming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification including labor charges for laying and fixing of precast concrete blocks including loading & unloading, laying to desired lines and levels complete excluding the cost of cement, sand, water, electricity, etc., including overheads & contractors profit complete for finished item of work.
224.4
936
210056.35
ITEM;Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. including overheads & contractors profit
821.35
3
2669.39
ITEM;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement., including overheads & contractors profit but excluding seignorage charges to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.
116.53
1159
135072.25
ITEM;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., including overheads & contractors profit but excluding seignorage charges for finished item of work. (APSS No.707 & 701)
43.5
1011
44005.47
ITEM;Providing dadooing to walls with aqua blue Glass mosaic tiles of 20 x 20 x 4 mm thick 1st quality premium variety of reputed make as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened (sand(50:50)) with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., including overheads & contractors profit but excluding seignorage charges complete for finished item of work. and as directed by the Engineer-in-charge. Make:Bisazza * Palladio * Expansive acqua reactive water barrier grouting system ? NCL Tile grout
160
1752
280446.4
ITEM;Flooring to swimming pool bottom with aqua blue Glass mosaic tiles of 20 x 20 x 4 mm thick 1st quality premium variety of reputed make approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm mixed with Integral water proofing compound and white cement paste mixed with pigment at matching shade and providing lane marking for swimmers with black colour glazed tile for lane dividers with pigment of matching shade, including cost of all materials like cement, (sand(50:50)) , water and tiles etc.,including overheads & contractors profit but excluding seignorage charges complete for finished item of work. and as directed by the Engineer-in-charge. Make:Bisazza * Palladio * Expansive acqua reactive water barrier grouting system ? NCL Tile grout
453
2212
1002162.84
ITEM;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, etc., including overheads & contractors profit but excluding seignorage charges complete for finished item of work . (APSS No.701 & 707)
330.17
5344
1764738.84
ITEM;Supply and Fixing of 25 MM EPDM: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety & Sports total 25MM [ 19 MM SBR & 6 MM EPDM ] thick Rubber flooring systems comprising two layers with the top layer of 6mm being high-quality EPDM granules and the bottom layer is 19 mm SBR There are two types of pigments used in our EPDM which are organic and inorganic. Inorganic pigments are used to manufacture Class 1 colors which are more stable. The granules shall be mixed on-site with specially developed binders and trowelled by hand to specified thickness creating a seamless surface. The flooring system shall be hygienic, durable with high elasticity, all-weather, resilient, nonslip, high impact, and easy maintenance EPDM. The performance requirements and test methods for an impact-absorbing playground surfacing shall comply with SS 495:2001 or ASTM Standards. Make: Koochie or equivalent make.Including overheads & contractors profit
318.4
5575
1775080
ITEM;Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge ncluding overheads & contractors profit but excluding seignorage charges , complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering
10.2
1173
11968.48
ITEM;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 800 x 800mm and thickness between 9-11 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge ncluding overheads & contractors profit but excluding seignorage charges etc., complete for finished item of work. (APSS No.701 & 707)
325.9
1280
417429.02
ITEM;Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2400mm) Including overheads & contractors profit complete for finished item of work
7.2
4216
30362.11
ITEM;Supplying and fixing of 24/26 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws and fitted with Hinges, 2 Nos of 250 mm long MS Aldrop, 2 Nos of 125 mm lond Aluminium door handle, 1 No.of 250 mm long Aluminium tower bolt, 1 no. 250 mm long Aluminium door latch & 1 No.baby lock as per direction of Engineer - in- Charge Including overheads & contractors profit complete for finished item of work
20.16
3085
62209.32
ITEM;Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking and friction stays. Wall thickness of frame, mullion and sash shall be 2.0 mm Including overheads & contractors profit complete for finished item of work
7.2
10241
73735.2
ITEM;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fiber mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site including overheads and contractors profit etc., complete for finished item of work.
110.16
8088
891001.62
ITEM;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Including overheads & contractors profit but excluding seignorage charges complete for finished item of work.
66.14
43
2861.22
ITEM;Providing and applying Exterior grade texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Colouring - Providing / Texture to External walls in Ground Floor in First Floor
455.76
516
235550.44
ITEM;Providing and applying Exterior grade texture ready mixed paint with sand texture added sand particles Acrylic copolymers and mineral compounds, bactericides and various additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Colouring - Providing / Texture to External walls in Ground Floor
1289.01
510
657588.45
ITEM;Painting to new walls with 2 coats of acrylic emulsion paint Interior Grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work in Ground floor.
1744.77
298
519941.46
ITEM;Plastering 20mm thick in First Floor in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work .(SS 901,903 & 904).
455.76
618
281700.7
ITEM;Plastering 20mm thick in Ground Floor in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work .(SS 901,903 & 904).
1289.01
611
788100.71
ITEM;Plastering 12mm thick in the First Floor in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes except GST on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work. (SS 901,903 & 904).
455.76
595
271177.2
ITEM;Plastering 12mm thick in the Ground Floor in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes except GST on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work. (SS 901,903 & 904).
1289.01
589
759226.89
ITEM;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes except GST on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work. (APSS No. 901 & 903).
178.5
636
113526
ITEM;Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) , constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., Including overheads & contractors profit but excluding seignorage charges but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)
21.34
968
20657.12
ITEM;Masonry work in CM (1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) , constructing masonry, lift charges, curing, etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work. (APSS No. 501 & 504) in First Floor.
126.32
9043
1142338.29
ITEM;Masonry work in CM (1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) , constructing masonry, lift charges, curing etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work. (APSS No. 501 & 504) in Ground Floor.
195.99
8745
1714116.78
ITEM;Supply and placing of the Nominal Mix Concrete M 20 grade for Roof Beam in First Floor corresponding to IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as weigh batching, machine mixing, laying concrete, curing, etc., aIncluding overheads & contractors profit but excluding seignorage chargescomplete but excluding the cost of steel and its fabrication charges for finished item of work (APSS No. 402).
56.46
15504
875389.15
ITEM;Supply and placing of the Nominal Mix Concrete M 20 grade for Roof Beam in Ground Floor corresponding to IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete t with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as weigh batching, machine mixing, laying concrete, curing, etc., Including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work (APSS No. 402).
35.7
15134
540297.37
ITEM;Supply and placing of the Nominal Mix Concrete M 20 grade for Lintel Beam in Ground Floor corresponding to IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as weigh batching, machine mixing, laying concrete, curing, etc., Including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work (APSS No. 402).
0.74
15453
11435.69
ITEM;Painting to new iron works with 2 coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints over prime coat having VOC (Volatile Organic Compound) content less than 30 grams/ Lit of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work
161.7
218
35250.6
ITEM;Supplying and fabricating, erecting and fixing in steel works like Compound Wall Grills using MS Structural Steel hollow Square & Rectangular sections of 240 MPA grade conforming to IS 4923-1997 including cost of welding rods, power charges of approved design and including cost and conveyance of all materials, labor charges for erecting & fixing all structural steel works erecting in position and fixing etc., complete in position, labour charges for fabrication, all incidental charges, overheads and contractor profit etc., complete for finished item of work as directed by the Engineer-in-Charge
3805.32
159
606111.37
ITEM;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour charges for cutting stones to required size and shape, mixing of cement, mortar, construction, curing etc., Including overheads & contractors profit but excluding seignorage charges complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
41.15
4631
190592.4
ITEM;Supply and placing of the Nominal Mix Concrete M 20 grade for Slab in First Floor corresponding to IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as weigh batching, machine mixing, laying concrete, curing, etc., Including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work (APSS No. 402).
1497.6
2016
3019416.19
ITEM;Supply and placing of the Nominal Mix Concrete M 20 grade for Slab in Ground Floor corresponding to IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as weigh batching, machine mixing, laying concrete, curing, etc., Including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work (APSS No. 402).
388.93
1974
768016.18
ITEM;Providing Thermo Mechanically Treated bars (TMT) (Fe -500/500D/550D from Primary producer TATA, SAIL, VSP, JSW &Shyam Steel etc as per IS 1786-2008) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes except GST on all materials and overheads & contractors profit complete for finished item of work.( APSS No.126)
57.79
89754
5186883.66
ITEM;RCC M- 20 Nominal mix (Cement: fine aggregate: coarse aggregate) for Plinth Beam corresponding to Table 9 of IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site , including all operational, incidental and labor charges such as machine mixing, laying concrete, curing, etc., including overheads & contractors profit but excluding seignorage chargescomplete but excluding the cost of steel and its fabrication charges for finished item of work.
24.69
14846
366568.73
ITEM;RCC M- 20 Nominal mix (Cement: fine aggregate: coarse aggregate) for Columns in First Floor corresponding to Table 9 of IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site , including all operational, incidental and labor charges such as machine mixing, laying concrete, curing, etc., including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work.
9.72
15431
149989.32
ITEM;RCC M- 20 Nominal mix (Cement: fine aggregate: coarse aggregate) for Columns in Ground Floor corresponding to Table 9 of IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site , including all operational, incidental and labor charges such as machine mixing, laying concrete, curing, etc., including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work.
13.77
14990
206412.3
ITEM;RCC M- 20 Nominal mix (Cement: fine aggregate: coarse aggregate) for Side walls of 230mm thick to Swimming Pool corresponding to Table 9 of IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site, including all operational, incidental and labor charges such as machine mixing, laying concrete, curing, etc., ational, incidental and labor charges such as machine mixing, laying concrete, curing, etc., including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work.
148.5
4337
644118.75
ITEM;RCC M- 20 Nominal mix (Cement: fine aggregate: coarse aggregate) for Footings corresponding to Table 9 of IS 456 with a minimum cement content of 400 kgs per 1 cum of concrete using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site , including all operational, incidental and labor charges such as machine mixing, laying concrete, curing, etc., including overheads & contractors profit but excluding seignorage charges complete but excluding the cost of steel and its fabrication charges for finished item of work.
180.68
10803
1951983.61
ITEM;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring beds using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water, etc. to site, sales & other taxes on all materials except GST and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing, etc., ncluding overheads & contractors profit but excluding seignorage charges complete for finished item of work. (APSS No. 402)
242.33
4909
1189816.07
ITEM;Earth work excavation for foundations (Mechanical Means) in ordinary soils and depositing on the bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labor charges such as shoring, sheeting, planking, strutting, etc., including overheads & contractors profit but excluding seignorage charges complete for finished item of work
1199.88
133
160531.95
ITEM;Earth work excavation for foundations (Manual Means) in ordinary soils and depositing on the bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labor charges such as shoring, sheeting, planking, strutting, etc., including overheads & contractors profit but excluding seignorage charges complete for finished item of work
66.14
304
20155.5
ITEM;Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all peraitonal, incidental, labour charges,hire charges of T&P etc., including overheads & contractors profit but excluding seignorage charges complete for fnished item of work(APSS NO.309&310)
2500
291
729725
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements