Hyderabad Metropolitan Development Authority Tender

BOQ;Engaging Tipper for Carting of Debries/ excavated earth, Unserviceable material with a lead of 5 KM into low level areas etc. Including loading, unloading, conveyance, Contractors profit and Overhead charges, incl cost of Hire, fuel, crew charges etc., complete for finished item of work and as directed by Engineer In Charge.

BOQ;Engaging JCB along the boundary of the land for clearance of boulders and levelling etc., Complete incl cost of diesel, driver batha, Contractors profit and Overhead charges etc., Complete for finsihed item of work and as directed by Engineer In Charge.

BOQ;Supplying and erection of 600mm dia Concertina coil fencing to the MS Angle vertical over the compound wall of all height using Super Razor Punched barb tape (SRPBT) Aluminum base helix coil of 600mm dia and coil to the MS Angle with fising accessories viz box clips C&J Clips etc made of SS 304 Grade aligning the fencing etc all as per manufacture specifications and as directed. The work also includes coverage of coil 50 turn per 6m of wall length, HTS wire as per IS-4454 galvanised as per IS-2629 Razor punched strip made of steel comprising of aluminium base with Zinc alloy @150gm/m2 as required etc. complete for finished item of work and as directed by Engineer in Charge.

BOQ;Manufacturing ,Supply , Fabrication, Erection and Fixing ofpowder coated steel wire of ANTI CLIMB MESH/ Smart Fencing 3.0-5.0mm dia, tensile strength 450-600 Mega Pascal (MPA) and PVC Coated Less than 9 mm opening between horizontal wires with powder coated including Labour charges for fixing in position power charges, cost and conveyance of all materials Complete for finished item of work and as directed by Engineer in charge.

BOQ;S& F 50 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings fixing the chain link fencing to Mild steel angular poles @ spacing 0f 3-0 metres C/C and supporting inclined poles of 2 nos of size 75 x 75 x 5 mm for every 15 metres C/C spacing including the cost of pipe & its fittings&labour charges,contractor profit and overhead charges etc., Complete for finished item of work and as directed by Engineer in charge.

BOQ;Manufacturing ,Supply , Fabrication,Erection and Fixing of Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2½"x2½" (63 mm x 63 mm) - 8 Gauge- including Labour charges for fixing in position power charges, contractor profit and overhead charges cost and conveyance of all materials Complete for finished item of work and as directed by Engineer in charge.

BOQ;Providing of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over a base coat of Zinc Chromate Yellow Oxide Primer paint for iron works including cost and conveyance of all materials labourcharges,contractor profit and overhead charges etc., complete for finished item of work and as directed by the Engineer-in-charge.

BOQ;Supplying and fixing Galvanized 2 stand Steel Barbed wire of 2.24 mm dia, 2.0 mm dia barbeh spacing and straining and fixing to MS Angles conforming to IS 278 - 1978 : Type A - IOWAType Designation as per standard specification including Labour charges for fixing in position power charges, cost and conveyance of all materials,contractor profit and overhead charges etc., Complete for finished item of work and as directed by Engineer in charge.

BOQ;Manufacturing, Supply, and Fixing of angular posts 50 X 50 X 6 mm at an espacement of 0.45 mts and bending goose neck 45 angle (0.4m height) with horizontal ties with MS angles 50 X 50 X 6 mm , as per the drawing including Nut and bolts,including cost of Labour charges for fixing Grills in position power charges, cost and conveyance of all materials ,allowances, contractor profit and overhead charges Complete for finished item of work and as directed by Engineer in charge.

BOQ;Providing and applying Weather scheld acrylic (APEX) emulsion paint of approved color and shade to External walls and after plastered surface and finishing with two coats of primer, and two coats of paint including cost of material, labour, scaffolding, contractor profit and overhead charges, lead and lift charges etc., all complete as directed by the Engineer incharge. Rate to include application at all heights & levels, surfaces and textures. Engineer incharges' approval required after each coat. Tenderer to submit sample to the Engineer incharges for approval and as directed by Engineer-in-charge

BOQ;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves, overheads & contractors profit complete, excluding sales & other taxes on all materials etc., excluding seignorage charges, GST as applicable etc., complete for finished items of work. (SS 901,903 & 904). and as directed by Engineer-in-charge

BOQ;Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materialslike cement, sand, bricks, water etc., to site, labour charges, scaffolding and curing, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, contractor profit and overhead charges etc., complete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls. but excluding seignoarge charges, GST as applicable complete for finished item of work and as directed by Engineer-in-charge. (APSS No. 501 & 504).

BOQ;Supply and placing of the RCC M25 Design Mix Concrete corresponding to IS 456 using Batching Plant , Transit mixer and concrete pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry and with minimum quantity of cement of 380 kg/cum as per IS code from standard suppliers approved by the department, including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges, such as weigh batching, machine mixing, laying concrete, curing, contractor profit and overhead charges etc., including pumping, lead and lift charges, centering, shuttering, laying concrete, vibrating, curing etc.for finished item of work (APSS No. 402) but excluding Seigniorage charges, cost of steel and its fabrication charges, GSTas applicable. complete for finished items of work and as directed by Engineer in Charge. For Column

BOQ;Supply and placing of the RCC M25 Design Mix Concrete corresponding to IS 456 using Batching Plant , Transit mixer and concrete pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry and with minimum quantity of cement of 380 kg/cum as per IS code from standard suppliers approved by the department, including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges, such as weigh batching, machine mixing, laying concrete, curing, contractor profit and overhead charges etc., including pumping, lead and lift charges, centering, shuttering, laying concrete, vibrating, curing etc.for finished item of work (APSS No. 402) but excluding Seigniorage charges, cost of steel and its fabrication charges, GSTas applicable. complete for finished items of work and as directed by Engineer in Charge. For Footing

BOQ;Supply and placing of the RCC M25 Design Mix Concrete corresponding to IS 456 using Batching Plant , Transit mixer and concrete pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry and with minimum quantity of cement of 380 kg/cum as per IS code from standard suppliers approved by the department, including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges, such as weigh batching, machine mixing, laying concrete, curing, contractor profit and overhead charges etc., including pumping, lead and lift charges, centering, shuttering, laying concrete, vibrating, curing etc.for finished item of work (APSS No. 402) but excluding Seigniorage charges, cost of steel and its fabrication charges, GSTas applicable. complete for finished items of work and as directed by Engineer in Charge. For Coping Beam & Plinth Beam

BOQ;Supply and placing of PCC M20 grade Nominal Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry and with minimum quantity of cement of 400 kg/cum as per IS code from standard suppliers approved by the department, including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including pumping, centering, shuttering, laying concrete, vibrating, curing, contractor profit and overhead charges etc., but excluding Seigniorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402)complete for finished items of work and as directed by Engineer in Charge.

BOQ;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)(BLD-CSTN-4-1 Amendment dt01.08.11 item 29)

BOQ;Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Hard Granite stones from approved quarry and minimum cement quantity of 59 kg/cum including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing, contractor profit and overhead charges etc., excluding seigniorage charges, GST as applicable complete for finished items of work and as directed by Engineer-in-charge for foundation and basement (APSS No. 601 & 615)

BOQ;Plain Cement Concrete (1:3:6) proportion by machine mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Granite macine crushed metal from approved quarry and minimum quantity of cement of 220 kg/cum, including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, lead and lfit charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as machine mixing, laying and ramming concrete in 150mm layers finishing top surface, curing concrete, contractor profit and overhead charges etc., excluding seigniorage charges, GST as applicable etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

BOQ;Excavation in Ordinary Rock Not requiring Blasting for as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Mechanical Means upto 3m depth Ordinary Rock Not requiring Blasting excluding seinorage charges including overhead and contractors profit complete for finisheditems of work and as directed by Engineer-in-charge

BOQ;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, contractor profit, overhead charges etc., excluding seigniorage charges and dewatering charges etc as per SS - 20 B (APSS 308). for ordinary soils mechanical means upto 3 m. complete for finished items of work and as directed by Engineer-in-charge.