Hyderabad Metropolitan Development Authority Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
138530Bid Award Id
ViewTender No
HMDA/DEV/CE/08/2019-20, Date 27-07-2019Tender Authority
Hyderabad Metropolitan Development Authority ViewPurchaser Address
-Website
http://https://hmda.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for Footings using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
300
-
7509.84
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for PEDESTRALS(COLUMNS UPTO PLITH) using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
34
-
8128.27
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for GROUND FLOOR COLUMNS using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
35
-
10719.98
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for first floor columns using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
33
-
10988.81
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for 2nd floor columns using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
33
-
12384.51
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for 3rd floor columns using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
33
-
12767.41
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for 4th floor/terrace using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
17
-
13148.77
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for plinth beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
55
-
10129.05
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for ground floor staircase using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
5
-
8200.15
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for first floor staaircase using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
5
-
8374.24
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for second floor stair case using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
5
-
8773.74
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for third floor stair case using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
5
-
8960.14
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for lift well (base slab and walls) and 150 mm thick groun d floor slab using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
940
-
1312.03
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for 150 mm thick first floor slab using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
820
-
1353.72
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for 150 mm thick second floor slab using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
820
-
1399.63
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for150 mm thick thick third floor slab using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
820
-
1427.59
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for for150 mm thick thick fourth floor slab ,water tank slab and side walls /terrace floorusing WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
80
-
1461.13
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for ground floor beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
54
-
9140.83
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for First floor beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
48
-
9592.05
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for second floor beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
48
-
9841.94
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for third floor beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
48
-
10090.3
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for stair case mumty & lift well roof and water tank beams & slabsusing WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
16
-
10356.08
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for Ground Floor lintel beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
4.5
-
8069.14
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for firstFloor lintel beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
4.5
-
8261.16
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for second Floor lintel beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
4.5
-
8677.05
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for third Floor lintel beams using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
4.5
-
8891.61
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for ground floor chejja using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
64
-
1348.16
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for first floor chejja using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
57
-
1377.35
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for Second floor chejja using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
57
-
1633.48
Providing and laying Design Mix Concrete corresponding to M 25 grade IS 456 for Third floor chejja using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand(50:50)) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete charges for finished item of work and as directed by the Engineer-in-charge.
57
-
1685.21
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) for Ground Floor using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work as directed by the Engineer-in-charge.( APSS No.126)
93
-
69231.82
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) for First Floor using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work as directed by the Engineer-in-charge.( APSS No.126)
30
-
70752.61
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) for Second Floor using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work as directed by the Engineer-in-charge.( APSS No.126)
30
-
72273.39
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) for Third Floor using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work as directed by the Engineer-in-charge.( APSS No.126)
30
-
73794.18
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) for Fourth Floor using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work as directed by the Engineer-in-charge.( APSS No.126)
7
-
75314.97
Construction of Brick Masonry work in CM(1:6) prop (Cement : Screened sand(Natural:Robo)(50:50)) in Ground Floor with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work as directed by the Engineer-in-charge. (APSS No. 501 & 504).
100
-
6738.32
Construction of Brick Masonry work in CM(1:6) prop (Cement : Screened sand(Natural:Robo)(50:50)) in First Floor with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work as directed by the Engineer-in-charge. (APSS No. 501 & 504).
85
-
7249.35
Construction of Brick Masonry work in CM(1:6) prop (Cement : Screened sand(Natural:Robo)(50:50)) in Second Floor with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work as directed by the Engineer-in-charge. (APSS No. 501 & 504).
85
-
7760.32
Construction of Brick Masonry work in CM(1:6) prop (Cement : Screened sand(Natural:Robo)(50:50)) in ThirdFloor with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work as directed by the Engineer-in-charge. (APSS No. 501 & 504).
85
-
8271.36
Construction of Brick Masonry work in CM(1:6) prop (Cement : Screened sand(Natural:Robo)(50:50)) in Fourth Floor with fly ash cement brick of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash of 80kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work as directed by the Engineer-in-charge. (APSS No. 501 & 504).
60
-
8880.43
Reinforced Masonry for partition walls (115 mm thick) in CM (1:4) prop. (Cement : Screened sand(Robo:Natural)(50:50)) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges all taxes except GST complete for finished item of work as directed by the Engineer-in-charge. (APSS No. of 509) -Ground Floor
350
-
647.38
Reinforced Masonry for partition walls (115 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges all taxes except GST complete for finished item of work as directed by the Engineer-in-charge. (APSS No. of 509) - First Floor
550
-
673.82
Reinforced Masonry for partition walls (115 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges all taxes except GST complete for finished item of work as directed by the Engineer-in-charge. (APSS No. of 509) -Second Floor
550
-
700.26
Reinforced Masonry for partition walls (115 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges all taxes except GST complete for finished item of work as directed by the Engineer-in-charge. (APSS No. of 509) -Third Floor
550
-
726.68
Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x19mm for stiles, & 15mm x 15mm for top &bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work
175
-
2142
Supply and fixing of door of size 1.0 x 2.1m with best seasoned teak wood frame of section 125x75mm and floor shultters of 35mm thick shutter of solid core bond wood block board with commercial ply on both faces and both sides laminated with approved colour including cost and conveyance to site of teak wood frame, shutter including supply and fixing of 6 nos. MS 'Z' hold fasts of size 300x40x5mm including cost of ISI marked aluminium fixtures of 3 nos butt hings 150mm long, 1 no. heavy duty miortice lock 6/7 levers with PC or CP handles, 1 no. heavy duty stoppers and 1 nos. rubber buffer including fixing the fixtures to foor with required number of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10mm) (1000x2100mm) (for all floors) TBSC-D.II-02, c as directed by the Engineer-in-charge
190
-
4351.66
Supply and fixing of door of size 2.1 x 2.1m with best seasoned teak wood frame of section 175x110mm and floor shultters of 35mm thick shutter of solid core bond wood block board with commercial ply on both faces and both sides laminated with approved colour including cost and conveyance to site of teak wood frame, shutter including supply and fixing of 6 nos. MS 'Z' hold fasts of size 300x40x5mm including cost of ISI marked aluminium fixtures of 3 nos butt hings 150mm long, 1 no. heavy duty miortice lock 6/7 levers with PC or CP handles, 1 no. heavy duty stoppers and 1 nos. rubber buffer including fixing the fixtures to foor with required number of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10mm) (2100x2100mm) TBSC-D.II-02, as directed by the Engineer-in-charge
5.25
-
5256.59
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists alminimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials accessories, labour charges for transportation, erection at site complete for finished item of work as directed by the Engineer-in-charge
305
-
5669
Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seignorge charges,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete all taxes except GST for finished item of work.- Ground Floor
645
-
489.53
Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seignorge charges,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete all taxes except GST for finished item of work.- First Floor
498
-
534.97
Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seignorge charges,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete all taxes except GST for finished item of work.- Second Floor
498
-
580.4
Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seignorge charges,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete all taxes except GST for finished item of work.-Third Floor
498
-
625.86
Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seignorge charges,sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete all taxes except GST for finished item of work.- Fourth Floor
600
-
671.3
Plastering 12 mm thick for even surface of wall in two coats with base coat in CM (1:6), 8mm thick and top coat in CM (1:4), 4mm thick with sponze finishing including cost and conveyance of all materials like cement, sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing seigniorage charges all taxes except GST etc., complete for finished item of work and as directed by the Engineer-in-charge -Ground Floor
2200
-
449.2
Plastering 12 mm thick for even surface of wall in two coats with base coat in CM (1:6), 8mm thick and top coat in CM (1:4), 4mm thick with sponze finishing including cost and conveyance of all materials like cement, sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing seigniorage charges all taxes except GST etc., complete for finished item of work as directed by the Engineer-in-charge-First Floor
2000
-
490.74
Plastering 12 mm thick for even surface of wall in two coats with base coat in CM (1:6), 8mm thick and top coat in CM (1:4), 4mm thick with sponze finishing including cost and conveyance of all materials like cement, sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing seigniorage charges all taxes except GST etc., complete for finished item of work as directed by the Engineer-in-charge-Second Floor
2000
-
530.92
Plastering 12 mm thick for even surface of wall in two coats with base coat in CM (1:6), 8mm thick and top coat in CM (1:4), 4mm thick with sponze finishing including cost and conveyance of all materials like cement, sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing seigniorage charges all taxes except GST etc., complete for finished item of work as directed by the Engineer-in-charge-Third Floor
2000
-
571.09
Plastering 12 mm thick for even surface of wall in two coats with base coat in CM (1:6), 8mm thick and top coat in CM (1:4), 4mm thick with sponze finishing including cost and conveyance of all materials like cement, sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing seigniorage charges all taxes except GST etc., complete for finished item of work as directed by the Engineer-in-charge-Fourth Floor
120
-
611.26
Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and shade for interior walls, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete,all taxes except GST for finished item of work as directed by the Engineer-in-charge in all floors.
8320
-
222.6
Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade for exterior walls, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit,all taxes except GST complete for finished item of work as directed by the Engineer-in-charge.
2040
-
255.1
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work -Ground floor
404
-
1027.56
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work-First Floor
413
-
1071.52
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work - Second floor
413
-
1115.48
Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work-Third Floor
413
-
1159.44
Flooring with 16 to 18mm thick High Polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-Ground floor
268
-
4180
Flooring with 16 to 18mm thick High Polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-First Floor
184
-
4260.8
Flooring with 16 to 18mm thick High Polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-Second Floor
184
-
4341.6
Flooring with 16 to 18mm thick High Polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-Third Floor
184
-
4422.4
Providing skirting to internal walls to 15 cm height with 8mm thick mirror polished granite tiles length equal to flooring stones other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge set over base coat of cement mortar (1:3) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-Ground floor
41
-
1903.58
Providing skirting to internal walls to 15 cm height with 8mm thick mirror polished granite tiles length equal to flooring stones other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge set over base coat of cement mortar (1:3) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-First Floor
31
-
1947.54
Providing skirting to internal walls to 15 cm height with 8mm thick mirror polished granite tiles length equal to flooring stones other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge set over base coat of cement mortar (1:3) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-Second Floor
31
-
1991.5
Providing skirting to internal walls to 15 cm height with 8mm thick mirror polished granite tiles length equal to flooring stones other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge set over base coat of cement mortar (1:3) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-Third floor
31
-
2035.46
Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles, seignorage charges etc., and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge.( In toilets) -Ground floor
48
-
864.94
Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles, seignorage charges etc., and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge.( In toilets) -First floor
98
-
908.9
Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles, seignorage charges etc., and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge.( In toilets) -Second Floor
98
-
952.86
Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles, seignorage charges etc., and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge.( In toilets) -Third floor
98
-
996.82
Providing skirting to internal walls to 15 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge.-Ground Floor
61
-
1018.28
Providing skirting to internal walls to 15 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work. as directed by the Engineer-in-charge-First Floor
69
-
1062.24
Providing skirting to internal walls to 15 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge-Second Floor
69
-
1106.2
Providing skirting to internal walls to 15 cm height with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge.-Third Floor
69
-
1150.16
Providing dadoing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete overheads & contractors profit, etc complete for finished item of work as directed by the Engineer-in-charge-Ground Floor
175
-
806.45
Providing dadoing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete overheads & contractors profit, etc complete for finished item of work as directed by the Engineer-in-charge.-First Floor
297
-
817.23
Providing dadoing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete overheads & contractors profit, etc complete for finished item of work as directed by the Engineer-in-charge.-Second Floor
297
-
828.01
Providing dadoing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete overheads & contractors profit, etc complete for finished item of work as directed by the Engineer-in-charge.-Third Floor
297
-
838.79
Supplying and fixing of MS hand railing of 0.90 m height as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with MS base plate of 120mm x 120 mm x 6 mm using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit, etcfor finished item of work as directed by the Engineer-in-charge. (for three floors and balcony)
198
-
2726.96
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) proportion using screened sand, 20mm thick mixed with 1 Kg of water proof compound (as approved by Engineer in charge) per bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seignorge charges,sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work as directed by the Engineer-in-charge.
706.25
-
673.92
Supply and Fixing of 32mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in Roof Slabs including MS junction deep box, Ms bends and all required accessories including masonary work and labour charges etc., complete for finished item of work and as directed by the Engineer-in-charge
Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal /Million Plast
450
-
99.24
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in Roof Slabs with all required MS junction deep boxes, MS bends and all accessories including and labour charges etc., complete for finished item of work and as directed by the Engineer-in-charge. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal /Million Plast
4200
-
81
Supply and fixing of 25mm outer dia Medium grade (1.8 mm thick) FRLS with IS:9537 part 3 rigid P.V.C. pipe (ISI MARK) concealed in wall with all required MS junction deep boxes, MS bends and all accessories including masonary, labour charges etc., complete for fan points, light, EPABX, LAN, and CCTV, Bell, for complete finished item of work and as directed by the Engineer-in-charge. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal /Million Plast
2800
-
86.2
Supply and erecting MS galvanished Fan hook box with hook in RCC slab including all Labour charges etc., complete for finished item of work and as directed by the Engineer-in-charge
230
-
311.81
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular switch box with cover plate including all labour charges etc., complete for Light, Fan, Exhaust Fan etc., complete for finished item of work and as directed by the Engineer-in-charge Makes of cable:Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard. Makes of switches: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina,
700
-
657.26
Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR /ZHFR PVC insulated 1100V gradeas per IS:694/1990 specification for Copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular switch box with cover plate including all labour charges etc., complete for finished item of work and as directed by the Engineer-in-charge Staircase points ( 2 way Switch ).
Makes of cable:Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.
Makes of switches: Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina,
10
-
666.27
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter along with 3 module box with cover plate with 6A modular switch on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete for finished item of work and as directed by the Engineer-in-charge.
Makes of MODULAR SWITCHES AND ACCESSORIES : Legrand Arteor / Schneider Zen celo / Honeywell Blenge
Plus / Cabtree Amare / Logus Platina.
381
-
458.86
Supply and Fixing of 16A/6A, 2 in one socket with 16A switch control modular type along with 3 module box with cover plate including all labour charges etc., complete for finished item of work and as directed by Engineer in charge Makes of MODULAR SWITCHES AND ACCESSORIES : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina.
35
-
588.6
Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete for finished item of work as directed by the Engineer-in-charge
Makes of COPPER FLEXIBLE CABLES : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.
1200
-
25.83
Supply and run of 3 of 22 /0.3mm (1.5 sq.mm) (phase, neutral and earth) FRLS / HFFR / ZHFR PVC insulated1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for sub-circuits including labour charges etc., complete as required for small switch boards complete for finished item of work and as directed by the Engineer-in-charge
Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.
2800
-
66.34
Supply and run of 3 of 36/0.3mm (2.5 sq.mm) (phase, neutral and earth) FRLS / HFFR / ZHFR PVC insulated1100V grade as per IS : 694 / 1990 specification flexible copper cable as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards complete for finished item of work and as directed by the Engineer-in-charge
Makes of COPPER FLEXIBLE CABLES : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.
3250
-
93.61
Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets complete for finished item of work and as directed by the Engineer-in-charge
Makes of COPPER FLEXIBLE CABLES : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.
1100
-
142.26
Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for run of mains including labour charges etc complete for AC points & SDB's etc as required complete for finished item of work and as directed by the Engineer-in-charge
Makes of COPPER FLEXIBLE CABLES : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.
250
-
199.23
Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits including labour charges etc. complete as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] complete for finished item of work and as directed by the Engineer-in-charge
Makes of COPPER FLEXIBLE CABLES : Finolex / RR kabel / Havells / APAR EBXL / KEI / L&T / VGuard.
500
-
310.21
Supply and fixing of DP Metal Enclosure with IP 20 Protection DB along with with 1 No 20A - 32 A, 10 KA DP MCB 10KA, C/D Curve ISI Mark complete for finished item of work and as directed by the Engineer-in-charge Makes of TPN DB: Legrand / Schneider / Siemens / L&T / Cabtree Xpro Makes of MCBs (Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree.
2
-
2290
Supply and fixing of TPN 4 way distribution board IP-43 (8+12 Module) Protection as per IS:13032 with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet Steel enclosure with 40A 4 pole MCB as incomer and 12 No of 6 to 32 Amps single pole , 10 KA breaking capacity 'c' Curve MCB outgoings including making connections etc., complete concealing in wall for finished item of work and as directed by the Engineer-in-charge.
Makes of TPN DB::Legrand / Schneider / Siemens / L&T / Cabtree Xpro.
Makes of MCBs (Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /Cabtree.
8
-
8318
Supply and fixing of SPN 8 way distribution board IP-43 Protection as per IS:13032 flushed in wall suitable for single pole outgoing MCB's in sheet Steel enclosure with 40Amps DP MCB as incomer and 6 No of 6 to 32 Amps single pole, 10 KA breaking capacity 'c' Curve MCBs as outgoings including connections and labour charges etc., complete concealing in wall for finished item of work and as directed by the Engineer-in-charge.
Makes of SPN DB : ABB / Havells / HPL / Hager / Indo Asian (Gold Plus) / C&S
/ Honeywell sentry.
Makes of MCBs (AS PER IS:60898-1:2002) : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora /
Cabtree.
1
-
4577
Supply, fabrication and fixing of metal enclosure made of 14 SWG CRCA sheet steel of dimensions [L-1.0M,B-.75,D-.45] including 1 no 250A, 4P, 415V MCCB, 2 nos 125A, FP MCCB with two sections of busbars suitable for 2 nos 125A each at either side of the MCCB section including suitable MS Stand Each section of 125A cubicles shall have gland plates of 2mm thick for 3.5Cx50 Sq.mm Power Cables which will be connected to VTPN DB's proposed either side of the Metal enclosure complete for finished item of work and as directed by the Engineer-in-charge
Makes of MCCBs:L&T / Schneider / Siemens / Legrand / Hager / ABB.
1
-
53815
Supply and fixing of 8 Way VTPN DB with IP 43 Protection as per IS:13032 and Supply and Fixing of 1 No., of 125A FP MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted as incomer with 6 Nos of 63A, 10KA, TP MCBs C/D Curve ISI Mark & 6 Nos of 32A, 10KA, SP MCBs C/D Curve ISI Mark as Out goings including internal connections and labour charges for FLUSH Mounting etc., complete for finished item of work and as directed by the Engineer-in-charge
Makes of TPN DB : Legrand / Schneider / Siemens / L&T / Cabtree Xpro. Makes of MCCBS / MCB: Makes : L&T / Schneider / Siemens / Legrand / Hager / ABB.
2
-
30007
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) for finished item of work and as directed by the Engineer-in-charge
2
-
10926.36
Supply and run of no 8 SWG GI wire including cost of all accessories and labour charges etc complete for finished item of work as directed by the Engineer-in-charge
50
-
19.36
Supply, transportation and fixing of 22W, 2300 lumens,
1200mm length T5 LED light housing made with alluminium
anodised body, wide operating voltage with PF≥0.9, Surge
protection: 2KV, THD10%, with inbuilt driver and frosted cover, CCT: 3000K - 6500K as desired by the department as per IS,
minimum CRI≥80 etc., complete for finished item of work and as directed by the Engineer-in-charge..
LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro /Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya /Keselec.
LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
250
-
1003.79
Supply, transportation and fixing of 18W, 1800 luminaire back lit LED Down Light Recessed / Surface mounting round/ square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor 0.9, Surge protection: 2KV, System efficacy of 100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI 80, and THD is less than 15% etc , complete for finished item of work and as directed by the Engineer-in-charge
LUMINAIRE MAKE : Phillips / OSRAM / GE Venture / Wipro /Crompton / Bajaj / Havells / Jaquar / Ib LED/ HPL / Syska / Surya /Keselec.
LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs.
115
-
2407.67
Supply and fixing 5W / 9W/11W LED Lamp along with ISI mark batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges, complete for finished item of work and as directed by the Engineer-in-charge. Makes of batten : GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega / HPL / Vimal / CPL. Make of lamp :Phillips / OSRAM / GE Venture / Crompton / Bajaj / Havells /Pharox / Halonix / Greenlites / Ib LED/ Jaquar / C&S / GM / Gold Medal / Million / Stanjo.
146
-
225.3
Supply and Transportation of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter/min but without Regulator, complete for dinished item of work and as directed by the Engineer-in-charge Makes of Fans : Crompton / Havells / Orient
230
-
1995
Supply and Fixing of modular Electronic step type fan regulator hum free step type in the existing switch board ( Modular Type ) complete for finished item of work and as directed by the Engineer-in-charge
Makes Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina
230
-
517.6
Supply and erecting 19/20mm steel tube down rod of 0.45m length with bolts & nuts and twin core wire duly painted with matching colour of fan, complete for finished item of work and as directed by the Engineer-in-charge
Makes of felxible cable : Finolex / RR Kabel / Havells / Polycab / GM / Million / VGuard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda /Payal / Finecab / Gemini / Vimal / Suncab
230
-
256.04
Labour charges for Fixing of Ceiling fan including giving connections with twin core wire etc., complete as directed by the Engineer-in-charge
230
-
173.25
Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete for finished item of work and as directed by the Engineer-in-charge
Makes : Crompton / Bajaj Bahar WG / Havells Ventilair-DB / Orient hill air.
26
-
1381.63
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete as directed by the Engineer-in-charge
26
-
493.5
Supply and laying of RG6 co-axial cable in the existing non metallic conduit pipe with connections etc.,complete for TVs and CCTV Net work for finished item of work as directed by the Engineer-in-charge
Makes: Finolex/ Million / Gold Medal / Anchor / Polycab
450
-
48.61
Supply and fixing of TV outlet Modular type in existing MS/modular box with modular front cover plate with screws connections etc., complete for finished item of work and as directed by the Engineer-in-charge
Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina.
6
-
245.86
Supply and laying of 2 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc., complete for finished item of work and as directed by the Engineer-in-charge
Makes: Finolex / Delton / Surabi / Polycab
350
-
24.68
Supply and fixing of Modular socket type Telephone jack with Connector including module box and cover plate 1 & 2 complete for finished item of work and as directed by the Engineer-in-charge
Makes : Legrand Arteor / Schneider Zen celo / Honeywell BlengePlus / Cabtree Amare / Logus Platina.
4
-
300.86
Supply and fixing of 10 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Complete for finished item of work and as directed by the Engineer-in-charge Makes: Krone or its equivalent.
1
-
1273
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements