Hyderabad Metro Rail Limited Tender

Repairs to existing room;Painting to walls with two coats of water proof cement paint of snowcem or equivalent of approved brand and shade over a base coat of water based Cement Primer of Exterior Grade- 2of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Water proof cement paint - 3 Coats.

Repairs to existing room;Flooring with Polished Shabad stones 1st class 15 to 18 mm thick (Tandur Stone slabs) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, including the cost and conveyance of all materials.

Repairs to existing room;Supply and transportation of 10W, 1000 lumens, 600mm length LED batten tube light, housing made with PC body, wide operating voltage with Single / double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification. 1 No 500.00LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply and transportation of 20W +/-10%, 1900 lumens, 1200mm length LED retro tube light, housing made with aluminum anodised body, wide operating voltage, double side connection, with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc.complete with 5 years warranty etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply of 4.0 Sq.mm 2 Core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:1990 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply of 40mm MS Junction deep box etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply of IS 20mm outer dia heavy grade, FRLS with IS:9537 part 3 rigid PVC pipe. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin / Champion / Austro etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply of 25mm PPR Ball Valve conforming to DIN Standards 8077/8092 etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply of 25mm PPR Union conforming to DIN Standards 8077/8092 etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply of 25mm x ¾? PPR Male Threaded Adaptor conforming to DIN Standards 8077/8092 etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supply of 20mm x ½? PPR Female Threaded Adaptor conforming to DIN Standards 8077/8092 etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;S&F of 15 mm CP finish brass concealed stop valve of not less than 400 grams weight quarter turn spindle conforming to IS etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;S&F Stainless steel 4" dia round Grating for nahany or floor trap cover with cockroach trap with or without hole etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;S&F of 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 893 etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supplying and fixing of 30mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, the door shutter shall be water resistant, fire resistant and termite resistant, with Tensile Strength not less than 170 Kgf/cm2 and the door shutters surface finished deco paint etc., complete excluding cost of hinges, latches, aldrops etc., etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have arebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine.Theready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hole fast etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;S&F premium make CPVC Pipes of 15.90mm OD Pipe etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Supplying & fixing Orissa Pan coloured glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm imcluding constructing Brick masonry seat and CC Squtting plate finishing etc complete as per standard practice for finished item of work. (TBSP-E.I-03)

Repairs to existing room;Supply, Installation and commissioning approved make floor mounted Anglo Indian wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour etc. complete as directed by Engineer in charge

Repairs to existing room;S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5 etc complete for finished item of work as per the directions of Engineering-in-charge.

Repairs to existing room;Plastering to walls with 12mm thick in two coats with base coat of 8mm thick in C.M. (1:5) and top coat of 4mm thick in C.M. (1:3) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand , Water, etc., to site, seigniorage charges, all operational, including charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing , including cutting grooves where ever necessary etc., complete for finished item of work of uneven surfaces of walls. (Internal walls)

Repairs to existing room;Supply and Fixing in position of steel works like Heavy steel works like trusses etc, including cost and conveyance of all material, labour charges for fabrication, erecting and fixing in postion etc,. Complete for finished item of work.

Repairs to existing room;Supply and Fixing of 0.5mm thick galvanized / pre painted G.I. profiled roofing sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self-tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti-capillary grove. including cost andconveyance of all materials, labour charges for transportation, erection at site complete for finished item of work.

Repairs to existing room;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost andconveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Repairs to existing room;BLD-CSTN-5-4-(42): Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, etc., to site cost of Seigniorage charges on all materials, including all labour charges like mixing Cement Mortor, scaffoding charges lift charges , curing charges etc., complete for finished item of work

Repairs to existing room;Plain Cement Concrete M20 nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) 20mm from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. HAND MIXING

Repairs to existing room;Disposal/carting of excavated surplus earth available at site with a lead of 10 KM including transporting ,loading and unloading (by manual means including idle charges of trucks) charges etc.,complete as directed by Engineer-in-charge.

Repairs to existing room;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for laying concrete under foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402): HAND MIXING

Repairs to existing room;Earth work excavation for Trenches/BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mannual Means.

Repairs to existing room;Demolition of existing Brick masonry wall including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead etc complete for finished item of work.