Endowments Department Tender

Shed at Nampally 1;Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms as per Table - I of IS:1077-1992 Non-Modular or traditional size 23x11x7cm, having compressive strength not less than 35kg/cm2, including cost & conveyance of all materials and labour charges, centering & scafolding charges, constructing masnory, lift charges, curing, overhead charges & Contractors profit etc., complete. But excluding seignorage chages and taxes like GST. (APSS No.501 & 504) for Super structure.

Shed at Nampally 1;Plain Cement concrete Grade M20 - Nominal Mix using 20mm metal with machine mixing incuding cost and covneyance of all materials and labour charges etc., complete.

Shed at Nampally 1;Supply and filling of Stone Dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost of sand, all operational, incidental, labour charges, complete for finished item of work, including cost and conveyance of all materials and labour charges, and contractors profit & over heads, but excluding seigniorage charges & taxes like GST etc. , complete. (APSS NO. 309 & 310)

Shed at Nampally 1;Construction of RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like trap stones, cement, sand, water, etc., to site including all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., and including over heads & contractor's profit, but excluding seigniorage charges and taxes like GST complete for finished item of work for foundation and basement etc. (APSS No. 601 & 615).

Shed at Nampally 1;Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters

Shed at Nampally 1;Supply and Fixing of 20mmØ foundation bolts

Shed at Nampally 1;Roofing with pre-painted galvalumme trapizoidal profile roofing sheet 0.50mm thick fixed to the purlins with 14 size self drilling screws with neopreme washers sidelops are stitched with self tapping/driling screws end lops are to be sealed with 25 x 3mm butyl tap. the sheet are provided with anticapillary grove

Shed at Nampally 1;Supply and Fixing of MS Plates In any thickness 1'-0" x 1'-0" x 12mm thick including cost and conveyance of all materials and labour charges etc.,complete

Shed at Nampally 1;Supply and Fabrication and fixing of heavy steel works using M.S tubs, pipes, flats as per IS 1161 including cost of fabrication labour charges for fixing etc., in position including cost and conveyance of all materials and labour charges etc.,complete

Shed at Nampally 1;Footing

Shed at Nampally 1;Spply and placing VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, steel centering & steel shuttering, etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, centering, shuttering, and also excluding seigniorage charges and taxes like GST etc. (APSS 403)

Shed at Nampally 1;Providing HYSD / TMT steel bars (Fe 415/ Fe 500 / Fe550 Grade as per IS 1786 to 1979) of different diameters for RCC works, including labour charges for straitening, cutting, bending to required sizes and shapes, placing in positions with cover blocks of approved materials and size and tying and lapse splicings with binding wire of 18 guage forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as over lapse, coupling, chairs, spacer bars, including cost and conveyance of binding wires, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding taxes like GST on all materials etc., complete foer finished item of work in all floors (APDSS No.126). For bars < 36mm dia for reinforcement (APDSS No.126)

Shed at Nampally 1;ordinary rock(not requiring blasting) mechanical means up to 3m depth

Shed at Nampally 1;Grouting the holes with neat cement slurry excluding cost of steel 20 mm dia meter (Sl.no.145. P.no.30)

Shed at Nampally 1;Drilling holes in hard granite or sheet rock 20 mm dia meter (Sl.no.139. P.no.29)