Defence Research And Development Organisation Tender
... More
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 22,50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DRDO_853180_1Bid Award Id
ViewTender No
CCEESTS/ENQ/CIV/DYSL-SM/ HYD/318/2024-25Tender Authority
Defence Research And Development Organisation ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Annexure-IV, V and VI and List of Tender Drawings
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 SQM on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
... More
All kinds of Soil
112
173
19376
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 SQM on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
... More
Ordinary rock
26
485
12621.18
... More
Hard rock(where blasting is prohibited)Excavated rock to be stacked for measurement.
70
1481
103735.1
... More
credit for hard rock
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 SQM on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All Kinds of soil
148
253
37444
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 SQM on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
Ordinary rock
132
615
81293.52
... More
Hard rock(where blasting is prohibited) Excavated Hard Rcok to be stacked for measurement
424
1481
628338.32
... More
credit for hard rock
424
-100
-42400
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth, consolidating EACH deposited layer by ramming & watering, lead up to 50m & lift upto 1.5m.
889
191
169799
... More
Supply and stacking at site good earth brought from outside MOD land in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50 meter and lead upto 1.5 meter
276
945
260820
... More
SUBHEAD-III ANTI TERMITE TREATMENT
-
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20%
283
228
64682.48
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL
anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor
1306
301
393994.08
... More
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
-
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
-
-
-
... More
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
230
52
11962.3
... More
SUBHEAD- IV : PLAIN & REINFORCED CEMENT CONCRETE
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 Coarse sand (Zone III) derived from natural sources) : 8 Graded stone aggregate 40 mm nominal size derived from natural sources)
317
6628
2101101.36
... More
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., upto floor five level, excluding the cost of centering, shuttering and finishing
19
9628
182932.57
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarses and (zoneIII) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
165
729
120296.55
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement
-
-
-
... More
All works upto plinth level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 KG /CUM
551
9248
5095714.12
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
87
9395
817365
... More
All works above plinth level upto floor V level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 KG /CUM
828
9594
7943972.76
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
17
9741
165597.68
... More
Add for using extra cement in the items of design mix over and above
the specified cement content therein.
315
713
224815.5
... More
Centering and shuttering including strutting, proppingetc. and removal of form for
-
-
-
... More
Foundations, footings, bases of columns, etc. for massconcrete
620.8
381
236872.45
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
2389
716
1711766.28
... More
Suspended floors, roofs, landings, balconies and access platform
2088
902
1883814.48
... More
Edges of slabs and breaks in floors and walls under 20 cm wide
223
202
45251.16
... More
Walls (anythickness) including attached pilasters, butteresses, plinth and string courses etc.
298
819
244285.5
... More
Columns, Pillars, Piers, Abutments, Postsand Struts
1544
935
1444164.96
... More
Arches, domes, vaults up to 6 m span
120
2096
251541.6
... More
Extra for shuttering in circular tank (20% of respective centering & shuttering)
250
983
245925
... More
Extra for additional height in centering, shuttering where ever required
with adequate bracing, propping etc., including cost of de-shuttering
and decentering at all levels, over a height of 3.5 m, for every additional
height of 1 metre or part thereof (Plan area to be measured); Suspended floors, roofs, landings, balconies and access platform
1850
373
691752
... More
SUBHEAD- V: STRUCTURAL AND STAINLESS STEEL WORK
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
187
104938
19623406
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
6.2
130090
806558
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or Lhooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mmthickwithzinccoatingnotlessthan275gm/m²
200
1058
211646
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
6500
751
4885075
... More
SUBHEAD- VI: MASONRY WORK
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)
17
6939
117974.39
... More
Providing brick masonry with bricks of class designation 7.5 in cement mortar 1:6(1 cement: 6 coarse sand) in superstructure at all levels and locations etc., complete all as per drawing and specifications.
747.07
8860
6619103.89
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand
250
1093
273365
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
82
7113
583335.7
... More
SUBHEAD- VII: FINISHING
-
-
-
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.
2011
385
776125.34
... More
Providing of 12mm cement plaster of mix in all surface with (a) cement mortar 1:6 ( 1 cement : 6 fine sand ) at all levels
3360
324
1089816
... More
15mm thick plastering in cement mortar 1:6(1 cement: 6 fine sand) on internal surfaces of walls finished smooth and even etc., complete at all levels and locations.
2810
372
1047174.6
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge
2600
522
1359644
... More
White washing with lime to give an even shade : New work (three or more coats)
1876
38
71288
... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
630
65
41315.4
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
630
151
95564.7
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
6856
180
1238467.84
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 SQM over and including priming coat of exterior primer applied @ 2.20 KG/ 10 SQM) Apex Ultimar of Asain/Berger or Equivalent.
2590
166
431183.2
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
5700
151
865488
... More
Providing & fixing Chicken wire mesh at the junctions of RCC and brick wall , 200mm overlapping on both sides, 100mm on each side with all necessory hardware etc. complete with guage and mesh size- 20swg and 20mm mesh
274
234
64116
... More
SUBHEAD -VIII : FLOORING WORK
-
-
-
... More
Providing and laying anti skid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
140
1066
149371.6
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
262
1233
323234.64
... More
Providing and laying Vitrified tiles in floor in different Size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily
-
-
-
... More
Double Charge Vitrified tile polished finished of size. Size of tile 1000 X 1000 mm
550
1753
964177.5
... More
Double Charge Vitrified tile polished finished of size. Size of tile 600 X 600 mm
450
1414
636480
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Double Charge Vitrified tile polished finished of size. Size of tile 1000 X 1000 mm
40
1579
63169.2
... More
Double Charge Vitrified tile polished finished of size. Size of tile 600 X 600 mm
35
2104
73647
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
164
1027
168526.4
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.: 18 mm thick
26
644
16748.42
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent.
500
4360
2180150
... More
Providing and fixing 18 mm thick granite of any colour and shade with area of slab upto 0.50 sqm.gang saw cut, mirror polished granite area of slab over 0.50 Sqm, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, risers of steps and treads and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red.
200
5267
1053468
... More
Providing edge moulding to 18mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in-Charge. Granite work
135
497
67115.25
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).
67
9558
640423.52
... More
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove with poly sulphide sealant complete as per specifications and direction of the Engineer-in-Charge.
310
100
31186
... More
SUBHEAD -IX :DOORS & WINDOWS WOOD /ALLUMINIUM & PVC WORK
-
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
133
3380
449553.3
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters
-
-
-
... More
a) 80x1.20 mm M.S. laths with 1.20 mm thick top cover
16
3217
51484
... More
Providing and fixing ball bearing for rolling shutters.
6
479
2874.36
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
35
517
18095
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
26
617
16050.32
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
34
5182
176188
... More
A Providing and fixing factory made uPVC glazed/wiremesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced withgalvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inlines as hadaptor(where ever required) of appropriate dimension, EPDM gasket, hardware,SS304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleevefor fixing frame to finished wall as perIS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners,including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproo fsilicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paidseparately. Note:-Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed45m/sec as per IS875–Part3 (ii) Sites with structure height more than 20m for all wind speeds
-
-
-
... More
Three trach three panel sliding window with two glazed and one wire mesh panels using R3 series with frame and glazed and fly proof sash with zinc alloy powder coated handle on every glazed panel along with multi point locking system
150
10581
1587150
... More
Providing and fixing factory made uPVC white colour fixed glazed ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads ofappropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Using R1 series with frame ( Height upto 0.9m)
10
8025
80250
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:(SINGLE REBATE door frame) Profile C
10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb
256
595
152320
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness.The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
40
556
22240
... More
Providing and fixing 30 mm thick Fiber glass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
12
4368
52416
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125mm
36
64
2304
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to Brick wall/column by dash fasteners
535
213
113955
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
200x10 mm
39
97
3783
... More
150X10mm
31
80
2480
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 KG to 80 KG and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
28
957
26796
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colou rand shade, with necessary screws etc. complete.
twin rubber stopper
30
70
2100
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not
less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete (ALDROP)
-
-
-
... More
a) 300x16 mm
24
295
7080
... More
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
20
971
19420
... More
SUBHEAD -X STRUCTURAL GLAZING
-
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
175
403
70544.25
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
-
-
-
... More
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
... More
b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
-
-
-
... More
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
... More
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
... More
e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified.
-
-
-
... More
The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving
authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
-
-
-
... More
1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr” 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331- 09 testing method for a range up to 2000 ml.” 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml” 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME- 330-10 testing method for a range upto 50 mm”
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)
upto 2000ml”
100
3416
341600
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment, only the actual area of glass on face # 1 of the glass (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.250.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
100
3618
361800
... More
SUBHEAD -XI : MISCELLEANOUS WORKS
-
-
-
... More
Providing and fixing at all height 12.5mm thick Gypsum board false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the angle hangers of 25 x 25 x0.55 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 mm x 15 mm x 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick botton wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @ 230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting.
700
1319
923300
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
1314.4
1639
2154459.33
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
(a) Serrated with central bulb (225 mm wide, 8-11 mm thick)
105
318
33474
... More
Providing and fixing on wall face unplasticised Rigid Single socketed PVC rain water pipes conforming to IS : 13592 Type A, along with injection moulded fittings as required e.g., bends on any angle, sockets, junction, cowls, offsets, access pieces, including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, providing and fixing MS stays & clamps and cutting & making good the holes in floors and walls wherever required etc. all complete. (For Rain water pipe). 110 mm dia
84
367
30845.64
... More
SUBHEAD -XII: SANITARY
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid pastic seat and lid
8
7790
62323.36
... More
Providing and fixing white vitreous china flat back smalll urinal of size 26.5 X 31.5 X 44 CM with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required :(a) Single half stall urinal P.V.C. manual flushing cistern (Make : Hindware,Jaquar or equivalent).
7
9672
67708.13
... More
Supplying and fixing wash hand basin suit comprising of :
(a) Best quality of vitrious china countertop wash basin of approved make or equivalent including 15mm piller cock,stop cock , waste coupling , bottle trap etc of approved make. Hindware, Cat No. 91094, with pillar cock Jaguar Code : FUS CHR - 29001 including waste coupling etc., including necessary PVC connections, CP brass waste pipe of 32 mm dia etc. all complete.
2
13882
27764
... More
Providing and fixing wash basin with C.I. brackets, 15mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreus China Wash basin size 550 x 400 mm with a 15 mm CP Brass single hole basin mixer including waste pipe etc.
8
3853
30828.96
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
8
952
7618.24
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 60 cm length, 5 mm nominal bore
24
95
2280
... More
Supplying and fixing in position CP Towel rod of 600 mm long fixed to wall with necessary plugs screws , washers etc., complete.
5
1292
6460
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
-
-
-
... More
Kitchen sink with drain board
-
-
-
... More
510x1040 mm bowl depth 250 mm
1
6758
6758.07
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
1564
7822.7
... More
Supplying and fixing of CP Health faucet with 8mm dia and flexible tube wall hook, and angular stop cock etc., complete.
8
1048
8384
... More
Providing and fixing square mouth SW gully trap clas sp- complete with CI grating brick chamber with water tight CI cover with frame of 300 x 300mm size weight of cover not less than 4.5kg and frame weight not less than 2.7kg, with common burnt clay FPS bricks of class designation 7.5
12
1564
18774.48
... More
Providing and fixing toilet paper holder: C.P. brass.
7
782
5474
... More
SUBHED -XIII : INTERNAL WATER SUPPLY
-
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
18
493
8876.16
... More
Providing and fixing C.P. brass long Nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore
3
798
2395.62
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931. 15 mm nominal bore
8
652
5218.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
75
484
36327
... More
25 mm nominal outer dia Pipes
75
610
45773.25
... More
20 mm nominal dia Pipes
75
523
39231
... More
32 mm nominal dia Pipes
150
719
107901
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
7000
10
74900
... More
Supplying, laying, jointing, testing and commissioning; uPVC(SWR) pipe (Type-B) as per IS : 13592/1992 including specials of best quality and approved make fixed to wall/floor including chasing, cutting, making the hole in walls/floors, cutting the pipes to the required size of length jointing the pipes and specials with suitable resin and testing etc.,complete all as specified and directed. (Specials at junctions must have access doors wherever required.)
-
-
-
... More
a) 110 mm dia
200
367
73442
... More
SUBHEAD XIV : BOUNDARY WALL
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 SQM on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All Kinds of soil
150
253
37950
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 SQM on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
Ordinary rock
5
616
3080
... More
Hard rock(where blasting is prohibited)Excavated rock to be stacked for measurement
10
1481
14819.3
... More
Credit for hard rock
10
-100
-1000
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm in depth, consolidating EACH deposited layer by ramming & watering, lead up to 50m & lift upto 1.5m.
120
191
22920
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 Coarse sand (Zone III) derived from natural sources) : 8 Graded stone aggregate 40 mm nominal size derived from natural sources)
16
6628
106049.28
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement
-
-
-
... More
All works upto plinth level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 KG /CUM
8
9248
73984.96
... More
All works above plinth level upto floor V level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 KG /CUM
32
9594
307013.44
... More
Centering and shuttering including strutting, proppingetc. and removal of form for
-
-
-
... More
Foundations, footings, bases of columns, etc. for massconcrete
14
381
5341.84
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
200
716
143304
... More
Columns, Pillars, Piers, Abutments, Postsand Struts
62
935
57991.08
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1.4
104938
146913.2
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1.3
130090
169117
... More
Providing brick masonry with bricks of class designation 7.5 in cement mortar 1:6(1 cement: 6 coarse sand) in superstructure at all levels and locations etc., complete all as per drawing and specifications.
16
8860
141761.44
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
120
7113
853662
... More
Providing of 12mm cement plaster of mix in all surface with (a) cement mortar 1:6 ( 1 cement : 6 fine sand ) at all levels
150
324
48652.5
... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
300
65
19650
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
300
151
45507
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 SQM over and including priming coat of exterior primer applied @ 2.20 KG/ 10 SQM) Apex Ultimar of Asain/Berger or Equivalent.
150
166
24972
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete
3700
122
452695
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
800
1038
830624
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
-
-
-
... More
Flush/ Ruled pointing
266
374
99747.34
... More
SUBHEAD XV : EXTERNAL SEWARAGE
-
-
-
... More
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
150
342
51396
... More
Supplying laying jointing testing and commisioning best quality and approved make glazed stone ware pipesof Grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1cement : 1 fine sand ) including necesary joints if any etc,complete all as specified and directed.
-
-
-
... More
a) 150mm dia
150
677
101551.5
... More
Providing and laying cement concrete 1:5:10 (1 cement :5 Coarse aggregate: 10 graded stone aggregate 40mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
-
-
-
... More
a) 150 mm diameter S.W. Pipe
150
1147
172198.5
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
(a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
(i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
10
10408
104081.2
... More
Supply, lowering & installation of RCC readymade hume pipe septic tank of approved make at suitable location as directed including excavation, back filling, sewer line connections at inlet & outlet, inspection chambers, etc. complete as standard design and as directed. 25 Users
2
47757
95514
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
26136
52273.26
... More
SUBHEAD XVI : ROAD WORK
-
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
2300
213
489900
... More
Supply and stacking at site good earth brought from outside MOD land in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50 meter and lead upto 1.5 meter
600
945
567000
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
600
24
14508
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge
500
2835
1417805
... More
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity
175
10734
1878507.75
... More
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
175
8185
1432523.75
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
60
9844
590665.2
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- charge 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
1000
1017
1017420
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
a) 100 mm dia. R.C.C. pipe
30
493
14800.8
... More
b) 150 mm dia. R.C.C. pipe
20
541
10828.6
... More
c) 300 mm dia. R.C.C. pipe
25
967
24186.25
... More
SUBHEAD XVII : AREA DEVELOPMENT AND DRAINAGE
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 SQM on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All Kinds of soil
525
253
132825
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 SQM on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
Ordinary rock
52
616
32032
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level :
-
-
-
... More
1:4:8 (1 Cement : 4 Coarse sand (Zone III) derived from natural sources) : 8 Graded stone aggregate 40 mm nominal size derived from natural sources)
46
6628
304891.68
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)
250
6939
1734917.5
... More
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., upto floor five level, excluding the cost of centering, shuttering and finishing
10
9628
96280.3
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement
-
-
-
... More
All works upto plinth level
-
-
-
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
15
9395
140925
... More
Centering and shuttering including strutting, proppingetc. and removal of form for
-
-
-
... More
Walls (anythickness) including attached pilasters, butteresses, plinth and string courses etc.
200
819
163950
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
104938
104938
... More
Providing of 12mm cement plaster of mix in all surface with (a) cement mortar 1:6 ( 1 cement : 6 fine sand ) at all levels
800
324
259480
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge
25
2998
74968.5
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
(a) 450 mm dia RCC pipe
25
1577
39429.5
... More
b) 600 mm dia. R.C.C. pipe
16
2182
34925.28
... More
SUBHEAD XVIII : ARBOICULTURE
-
-
-
... More
Supply of Grass and planting by dibbling the area including watering & Maintenance of Lawn for 30 days or more till grass forms a thick lawn cushion free from weeds. With Doob Grass (15 cm x 15 cm apart) including one year maintenance after completion of work
2000
278
556000
... More
Trees:- Digging of pits of size 1x1x1m and refilling with good agriculture soil and well decomposed cattle manure in 4:1 ratio. Supply and planting of approved Tree species of healthy grownup saplings with good root system. Saplings should be of minimum 4 ft height from ground level after plantation. Maintenance includes, regular watering, de-weeding, loosening of soil fortnight, manuring with cattle manure and fertilizer, training, pruning, staking and spraying of insecticide and fungicide, including one year maintenance after completion of work
74
440
32560
... More
Shrubs: Digging of pits of size 0.60x0.60x0.60m and refilling with good agriculture soil and well decomposed cattle manure in 3:1 ratio. Supply and planting of approved Shurbs species of healthy grownup saplings with good root system. Saplings should be of minimum 2 ft height from ground level after plantation. Maintenance includes, regular watering, de-weeding, loosening of soil fortnight, manuring with cattle manure and fertilizer, training, pruning, staking and spraying of insecticide and fungicide,including one year maintenance after completion of work
59
125
7375
... More
Hedges: Digging of trenches of size 0.30 x 0.30m (width & depth) and refilling with good agriculture soil and cattle manure in 4:1 ratio. Maintenance includes, regular watering, de-weeding, loosening of soil fortnight, manuring with cattle manure and fertilizer, pruning, shaping and spraying of insecticide and fungicide,including one year maintenance after completion of work
80
111
8880
... More
Flower Beds: Digging upto 0.10m refilling with good soil and cattle manure in 3:1 ratio. Preparation of beds supply and planting of healthy grown up plant material. Maintenance includes regular watering, de-weeding, manuring with manure and fertilizer.pruning, shaping and spraying of insecticide and fungicide,including one year maintenance after completion of work
30
96
2880
... More
Potted Plants: Supply and maintaining the Indoor and Outdoor potted plants in a good healthy and disease free condition of various varieties and in 300 mm Dia.PVC Plastic Pot.
108
248
26784
... More
SUB HEAD-XIX : RAIN WATER HARVESTING WORK
-
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
7
1469
10283.28
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7
1496
10477.04
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
7
1496
10477.04
... More
Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
16
1969
31517.44
... More
SUB HEAD-XX INTERNAL ELECTRIFICATION
-
-
-
... More
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required including connections. (NOTE - Colour code shall be maintain as per IE rule for all schedule items and including resistance test, wiring diagram and inventory shall be made after completion,complete all as specified and as directed.)
-
-
-
... More
One Light point controlled by one 6A Switch
258
1467
378486
... More
One ceiling fan point controlled by one 6 A Switch and electronic fan regulator of 100W step type with concealed MS Fan hook box.
68
1467
99756
... More
One Exhaust fan point controlled by one 6A Switch
14
1467
20538
... More
One Call bell point controlled by one 6A Switch
5
1467
7335
... More
Wiring for control one light point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, controlled by Two, Two way modular switch, modular plate, suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required including connections. (NOTE - Colour code shall be maintain as per IE rule for all schedule items and including resistance test, wiring diagram and inventory shall be made after completion,complete all as specified and as directed.)
6
1562
9372
... More
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed medium class PVC conduit as required. (NOTE - Colour code shall be maintain as per IE rule for all schedule items and including resistance test, wiring diagram and inventory shall be made after completion,complete all as specified and as directed.)
-
-
-
... More
(a) 2 runs x 2.5 Sqmm and 1 x 2.5 Sqmm (For Socket/light Circuit)
1300
275
357500
... More
(b) 2runs of 4Sq.mm wires with 1run of 4 Sq.mm wire in and including 25mm dia PVC Conduit (For Power Sockets).
700
334
233800
... More
(c) 2runs of 6Sq.mm wires with 1run of 6 Sq.mm wire in and including 25mm dia PVC Conduit. (For AC Sockets).
600
439
263400
... More
(d) 4 runs of 6 Sq.mm wires with 2 runs of 6 Sq.mm wires in and including 32 mm Dia PVC Conduit (For Lighting Sub Mains)
500
754
377000
... More
(e) 4 runs of 10 Sq.mm wires with 2 runs of 6 Sq.mm wire in and including 32 mm Dia PVC Conduit (For Power Sub Mains)
600
1005
603000
... More
Supplying and fixing following size / module G.I box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
2 Module (75 MM x 75MM)
10
298
2980
... More
3 Module (100 MM x 75MM)
50
327
16350
... More
6 Module (200 MM x 75MM)
50
402
20100
... More
8 Module (125 MM x 125MM)
10
454
4540
... More
12 Module (200 MM x 150MM)
20
547
10940
... More
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connection but excluding modular plate etc. As required.
-
-
-
... More
(a) 5/6 Amp Switch
521
103
53663
... More
(b) Two way 5/6 Amp Switch
12
148
1776
... More
(c) 15/16 Amp Switch
93
156
14508
... More
(d) Bell push
5
140
700
... More
(e) 5/6 Amps, 5 pin (250 Volts) single phase modular type socket controlled by 6 Amps SP Switch.
181
122
22082
... More
(f) 15/16 Amps, 6-pin (250 Volts) single phase modular type socket controlled by one 16 Amps SP Switch.
93
197
18321
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts complete as required.
5
99
495
... More
Supply and fixing of factory made 25A, single phase Metal clad socket with plug top & 25A SP MCB in MS box including all fixing accessories.
45
3530
158850
... More
Supply and fixing of factory made 32A, single phase Metal clad socket with plug top & 32A MCB in MS Box including all fixing accessories.
6
3665
21990
... More
Supplying and fixing of factory made 32A, 415 volt,Three phase & Neutral industrial type socket outlet, with 4 pole and earth, Metal enclosure plug and top alongwith 32 Amps “C” curve TP MCB , in sheet steel ewnclosure, on surface or in recess, with chained metal cove4r for the socket outlet and complete with connections, testing and commissioning etc. As required.
3
4107
12321
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
36
40
1440
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
181
477
86337
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16Amodular socket outlet and 15/16 A modular switch, connections etc. as required.
93
586
54498
... More
Supply andf fixing LED light fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. The fixtures shall be complete with all prewired upto the terminal block. All fixtures shall be supplied with lamps. The Catalogue Numbers refers to Philips Make .
-
-
-
... More
(a) Supply and fix green LED ultima square, ultra sleek recessesed downlight for low height bfalse ceiling in square profile 2ft x 2ft LED40W Luminaire with Diffuser (Philips : DN097BLED 10S-6500 PSU WH) or equivalent approved make.
100
3222
322200
... More
(b) 40W LED luminaire 4ft LED Luminaire essential bright batten (Philips : BN170C LED 40S-6500 PSU L120) or equivalent approved make.
106
2834
300404
... More
(c) 20W LED luminaire 2ft LED Luminaire essential bright batten (Philips : BN021 LED 221S-6500 PSU CW GR120) or equivalent approved make.
19
1658
31502
... More
(d)20W MIRROR LIGHT Surface Mounted MAKE-PHILLIPS BN 308C LED 20 S-6500L 60PSU WH or equivelent
10
1381
13810
... More
(e) Philips 10 W Endura LED Bulkhead, 6500 K WT202W LED6S CW PSU S2 PC or equivelent
10
1243
12430
... More
Supply,installation, Tesdting and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Mnotor, class of insulation B. 3 Nos, blades,30cm long down rod,2 nos. Canopies,shackle kit,safety rope,copper wionding, power factor not less than 0.9 , Service value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350mn RPM(tolerance as per IS : 347-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers,temperature rise= 75 degree C(max0.insulation resistance more than 2 mega ohm, suitable for 230V, 50 Hz,, single phase AC supply,earthiing complete as required and as directed by Engineer-in-Charge.
68
2730
185640
... More
Supply of Exhaust fans of 305 mm sweep with Metalic blades and MS gravity louvers including all accessories / Installation materials required.
14
2122
29708
... More
Installation of Exhaust fan in the existing opening including making good the damage connectionj testing commissioning etc. As required upto 450 mm sweep.
14
261
3654
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) including taking down of the unserviceble distribution board.( for lighting, Power, AC and Labs).
(a) 4 way (8 + 12), Double door
12
4091
49092
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V on surface/recess, complete with tinned copper bus bar, earth bar, din bar, interconnections, powder painted including earthingetc. As required.(But without MCB/RCCB/Isolator)
-
-
-
... More
(a) 6 Way, Double door
4
2206
8824
... More
(b) 8 Way, Double door
4
2573
10292
... More
(c) 12 Way, Double door
5
2315
11575
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
(a) 63A
12
2872
34464
... More
Supplying and fixing of 6A to 32A rating 240/415V,10kA , C Curve miniature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete.
-
-
-
... More
(a) MCB Single pole
205
256
52480
... More
(b) MCB Single pole and neutral
30
599
17970
... More
(c) MCB Triple pole and neutral
12
1007
12084
... More
SUB HEAD XXI – TELEPHONE CONDUITS
-
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25 mm for LAN/Telephone/CCTV
800
145
116000
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
35
298
10430
... More
Supplying and drawing following pair 0.5 sqmm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2Pair
500
31
15500
... More
Providing, fixing connecting and testing of under noted size of solderless telephone tag block Connector in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted.
-
-
-
... More
10 Pair Tag Block
4
7976
31904
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
Telephone socket outlet (RJ11)
35
148
5180
... More
Supplying and fixing of modular type Lan (RJ-45) outlet in existing Box complete as required.
-
-
-
... More
Supplying and fix for socket outlet (RJ 45)
35
612
21420
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required
-
-
-
... More
1 run of cable
600
57
34200
... More
Supplying and fixing metal box of following sizes (nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
... More
180 mm X 100 mm X 60 mm deep
35
245
8575
... More
Supply, Installation, Testing, Commissioning of Rack for mounting the Switches, LIUs, etc. The rack shall be provided with utility sockets, cabling with cable ties & proper cable management, fans for ventilation, cable entry plates/ports all mounting accessories, complete as per all requirements of technical specifications.
-
-
-
... More
9U Rack
1
27482
27482
... More
Passive Components
-
-
-
... More
Supply, Installation, testing & Commissoning of 6 core Single mode Optical fiber armoured cable (OM3) with all mounting accessories, complete as per all requirements of technical specifications.
-
-
-
... More
6 core Single mode mode Optical fiber armoured cable
500
345
172500
... More
Laying of one number PVC insulated and PVC cable of of following size direct in ground including excavation and refilling the trench etc. As required, but excluding sand cushioning, protective covering .
-
-
-
... More
(a) Upto 35 sq. mm
400
200
80000
... More
Supply, Installation, testing & Commissoning of 4c x 1.5 sq.mm FRLS armourd cable for power, all laying & support accessories, complete as per all requirements of technical specifications.
-
-
-
... More
4c x 1.5 sq.mm FRLS armourd cable
150
276
41400
... More
Supply, Installation, Testing, Commissioning of LIU Singlemode, fully loaded with pigtails, adapter plates, blank plates, splicer tray, fibre optic patch cords ,etc, duplex LC optical connectors with all the necessary enhanced sliding mechanism based on wheels, with all the necessary wiring, mouning brackets, fixing & support accessories,etc. with all mounting accessories, complete as per all requirements of technical specifications.
-
-
-
... More
6 PORT LIU Single mode
6
4258
25548
... More
12 PORT LIU Single mode
2
131234
262468
... More
Pigtail for fiber connectivity
3
73567
220701
... More
Supply, Installation, Testing, Commissioning of 24 port Cat-6 patch panel, fully loaded, rack mount along with all the necessary fixing supports, patch cords (at both camera & Switch ends) , etc. with complete accessories.
-
-
-
... More
24port Patch Panel
3
43038
129114
... More
Patch cord 1 mtr
20
934
18680
... More
Patch cord Fiber 2 mtr
20
1181
23620
... More
SUB HEAD XXII- LIGHTNING PROTECTION SYSTEM
-
-
-
... More
Earthing with GI earth plate 600 mm X 600 mm X 3 mm
thick including accessories, and providing masonry enclosure
with cover plate having locking arrangement and watering pipe
of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
7472
44832
... More
Providing and laying G.I. tape 32mm X 6mm from the earth electrode directly in ground as required.
60
195
11700
... More
Providing and fixing G.I tape 20mm X 3mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run). NOTE – all GI tape shall be fixing with DMC Insulated Supports.
400
126
50400
... More
Providing and fixing G.I tape 20mm X 3mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run). NOTE – all GI tape shall be fixing with DMC Insulated Supports.
100
197
19700
... More
Providing and fixing testing , joint, made of 20mm X 3mm thick GI strip, 125mm long, with 4 nos. Of GI bolts, nuts, check nuts,and spring washers etc. Complete as required.
6
195
1170
... More
Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, GI tube having single prong at top, 85mm dia 6mm thick GI base plate including holes etc. Complete as required.
6
518
3108
... More
Providing and fixing testing jointing, made of 20mm x 3mm thick GI tape on parapet or surface of wall for lightning conductor complete as required for vertical run, complete all as specified and as directed.
400
80
32000
... More
Supply and fix single pointed air termination aluminium rod 12mm dia, 300mm long .
6
401
2406
... More
SUB HEAD XXIII - FIRE FIGHTING SYSTEM
-
-
-
... More
(A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisiting of following complete in all respects as required( Terrace pump)
-
-
-
... More
(B) Horizontal type, multistagem centrifugalm spllit casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS:1520
-
-
-
... More
(C) Suitable HP squirell cage induction motor TEC type suitable for operation on 415 Voltsm 3 Phase 50Hzm AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with class F insulation, confirming to IS: 325
-
-
-
... More
(D) MS fabricated common base plate coupling m coupling guard foundation bolts etc as required
-
-
-
... More
(E) Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
... More
a) 450 LPM at 35M head
1
86202
86202
... More
CONTROL PANEL FOR FIRE PUMP
-
-
-
... More
a) Fabricating & Supply, installing, testing and commissioning of control panel 450 LPM Booster Pump
1
64784
64784
... More
INCOMING :-
-
-
-
... More
a)1 Nos. 63A, 4P, MCB, 16kA with electrical(shunt trip coil)
-
-
-
... More
b)1 Set of RYB indicating lamps with controlled by 4P, MCB, 4A
-
-
-
... More
c)1 No. 96 Sq.mm 0-100 Amps. Digital Ammeter and suitable rated current transformers.
-
-
-
... More
1 No. 0-500 96 Sq.mm Digital Voltmeter.
-
-
-
... More
OUT GOING:-
-
-
-
... More
a) 1 No, 63A, TP, MCCB, 25kA, without releases (feeder for 450 LPM Booster Pump).
-
-
-
... More
b) Pressure switch 2.5 kg rated
-
-
-
... More
c) Star delta starter with overload relay, single phase preventor and indicating lamps with ON/OFF push buttons.
-
-
-
... More
Providing, laying , testing and commisssioning of C class heavy duty MS pipe confirming to IS:3589/IS 1239 including welding, fittings like elbows, tees, flanges, tapers,nuts bolts, gaskets etc., and fixing the pipe on the wall/ celling with suitable clamp/support frame and paintng with two or more coats of synthetic enamel paint of required shade complete as required.
-
-
-
... More
32mm Dia
100
851
85100
... More
50mm Dia
100
1281
128100
... More
65mm Dia
100
1614
161400
... More
80mm Dia
200
1885
377000
... More
Supplying and fixing single headed internal hydrant valve with instantaneous gunmetal /Stainless steel coupling of 63mm dia with cast iron wheel ISI marked confirming to IS 5290(type A) with blank gunmetal/ stainless steel cap and chain as required
-
-
-
... More
Single headed gunmetal
1
7646
7646
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13096 of following sizes as required.
-
-
-
... More
80mm Dia
1
4982
4982
... More
40mm Dia
2
5700
11400
... More
Supplying, fixing, testing and commissioning of double flanged sluice vavle of of PN 1.6 rating non rising spindle bronze/gunmetal seat ISI marked complete with nuts, bolts, washers, geskets confirming to IS 780 following sizes as required.
-
-
-
... More
40mm Dia
2
10696
21392
... More
80mm Dia
2
10696
21392
... More
Supplying and fixing orifice plate made out of 6mm thick stainless steel ( Grade 304) with Orifice of required size to be fitted between flange and landing valve of external and interanl hydrants to reduce pressure at the outlet to the level of 3.5Kg/Cm2 complete as required
1
1179
1179
... More
providing, installation,testing and commissioning of non-return valve of following sizes confirming to IS : 5321 complete with rubber gasket, GI bolts , nuts, washers etc as required.
-
-
-
... More
40mm Dia
2
5790
11580
... More
80mm Dia
2
7691
15382
... More
providing, installation,testing and commissioning of stainless steel Y- strainer fabricated out of 1.6mm thick stainless steel grade 304 sheet with 3mm dia holes with stainless steel flange.
-
-
-
... More
80mm Dia
1
4710
4710
... More
supply and fixing first-aid Hose Reel with MS construction spary painted in post office red, conforming to IS 884 complete with the following as required. 20mm nominal internal dia water hose thermoplatic ( textile reinforced) type -2 as per IS : 12585. 20mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipements on wall. connections from riser with 25mm dia stop gun metal valve & MS pipe and socket
-
-
-
... More
30M
4
4886
19544
... More
Supply, fixing 63mm dia gun metal short branch pipe with 20mm norminal interal diameter size nozzle conforming to IS 903 suitable for intstantaneous connection to interconnect hose pipe coupling as required
-
-
-
... More
gun metal
4
2416
9664
... More
Supply fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required
-
-
-
... More
2 way 100mm dia MS Pipe
1
6742
6742
... More
Supply and fix fire hose reel Drum with 20mm dia bore and 30 mrtres long hose and SS Heavy duty shunt off Nozzle red colour manual mode operation for fire fighting system, complete all as specified and as directed.
4
12457
49828
... More
Supply and fixing for wrap coating with anticorrossive wrapping tape 4mm thick for fire fighting under ground MS pipe complete as required and asw directed.
90
617
55530
... More
SUB HEAD XXIV - FIRE ALARM SYSTEM
-
-
-
... More
Supply,Testing and commissioning of the following number of Loops Microprocessor based addressable type (EN / UL approved) Fire alarm control panel with Zonal Indications, supervised inputs, supervised and non-supervised outputs,Zener barriers, two way media converter / Signal booster for in / out network connectivity with OF cableand with battery Power pack as per specifications.
-
-
-
... More
a) 2 - Loop
2
117854
235708
... More
Supply installation, testing and commissioning of analog addressable type multi sensor (smoke/ Heat) photo electric detectors with base and LED indication lamp along with all fixing accessories.
60
3582
214920
... More
Supply, Installation, Testing and commissioning of anologue addressable loop sounders along with all fixing accessories.
8
5035
40280
... More
Supply, Installation, Testing and commissioning of fault isolators along with all fixing accessories.
4
3236
12944
... More
Supply,Installation,Testing and commissioning of anologue addressable type monitor module along with all fixing accessories.
4
3798
15192
... More
Supply,Installation,Testing and commissioning of addressable control module along with all fixing accessories.
4
4174
16696
... More
Supply, Installation,Testing and commissioning of anologue addressable ordinary Manual call point with push type along with all fixing accessories.
8
4552
36416
... More
Supply and laying of 25mm dia medium class FRLS PVC conduit concealed in wall /ceiling / above false ceiling including bends,elbows, junction boxes, saddles, spacers etc., and other material required for fixing complete as per requirement.
1000
79
79000
... More
Supply,laying,testing of twisted pair 1.5sq mm shielded FR insulated copper conductor flexible wire in existing PVC conduit.
1200
217
260400
... More
Supply, fixing and installation of fire exit signage's self illuminating light fixtures displaying exit with an arrow towards the exit door.
12
1021
12252
... More
FIRE EXTINGUISHERS
-
-
-
... More
Supply & Installation of Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete, confirming to IS: 2878.
4
5053
20212
... More
Supply & Installation of Water CO2 Type fire extinguisher of 9 Ltrs. Capacity, filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete confirming to IS: 940.
2
2679
5358
... More
SUBHEAD XXV - POWER WIRING
-
-
-
... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MV panel made out of 2mm thick CRCA/Galvanised steel enclosure for main frame and 1.6mm thick partitions and shall have IK Certification as per IEC 62262 for mechanical strength/ruggedness, after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below.The panel shall be got fabricated from manufacturers as per IEC 61439(Part-1&2). Indoor panels shall have IP-4X degree of protection and Enclosure shall be powder coated with RAL-7035 coat with matt finish. Design ambient temperature shall be 50 degree centrigrade. No use of hygroscopic material like FRP/Hylam/Bakellite sheet inside the panel for partitions or any other purpose.
1
221484
221484
... More
The PCC shall have at least two spare cubicles. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on 75MM U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF /Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely.ACB's shall have built-in All ACBs shall be provided with Digital type Ammeter of suitable range along with CTs. All ACBs shall be provided with ON/OFF/TRIP indication lamps and shunt trip coils. All MCCB/ACBs of rating 160A and above shall be with Micro processor releases All MCCBs below 160A shall be with adjustable thermal magnetic based releases. All MCCBs shall be with spreader links and rotary handle. All MCCBs shall be over load & short circuit releases with Icu=100% Ics. All CTs/CBCT shall be resin cast type. All Controlling wiring shall be FRLS cables, all the bus bar sleeves shall be Heat shrinkable kits. Panels shall have form 4b/form 3b construction as per the requirement. ACBs shall conform to IEC 60947 (part 1&2), shall be suitable for rated system voltage 690V, Insulation voltage 1000V and Impulse withstand of 12KV. In case of 4 pole ACB, neutral rating shall be 100% of phase.ACBs shall have same height & depth for entire range irrespective of frame size. ACBs shall have Icu=Ics=Icw (Icw rating shall be for 1 sec). ACB's shall have ready to close contact. ACB release shall have individual indiaction LEDs for faults (L,S,I,G). ACB release shall be provided with built-in LCD display for following: Current measurement and display with bar graph, date & time stamping for events, last trip data & last 20 trip data. Release shall have over temp.protection. Release shall be provided with battery back-up to assist user to diagnose in the events of fault. Panel Front side Glass to be provided for clear visibility for each section.
-
-
-
... More
For MCCB with Microprocessor based release : A common indication LED for internal temp/ fault/alarm . MCCB should have in-built feature of logical selectivity by which it can give a time delay of 50msec between upstream and downstream MCCB & ACB. The microprocessor based release should have the following settings:
• Overload Settings: 0.4 to 1 times of Ir
• Short Circuit Settings: 1.25 to 10 times of Ir.
• Earth fault Settings: 0.2 to 1 times of In.
• Neutral protection settings: 0 – 50% – 100%Ir. • Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. • MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) • The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. (FOR BUILDING MAIN PANEL)
-
-
-
... More
BUILDING MAIN PANEL
-
-
-
... More
INCOMING :-
-
-
-
... More
(a) MCCB, with Microprocesssor release with 250Amps, 35kA, TP - 1 SET
-
-
-
... More
(b) Incomer shall have one set of the following items:
-
-
-
... More
(c) 0 - 500V Digital Volt meter - 1No.
-
-
-
... More
(d) 0 – 400A Digital Ammeter- 1 No.
-
-
-
... More
(e) Multi function digital meter of suitable range to read Volt,Amp, KVA, KVAH, KWAH, KW, KVAR, PF, Hz etc and LED display with required Nos CTs, 15 VA, class 1 class and control circuit wiring with MCBs - 1 No.
-
-
-
... More
(f) One Set of Indication Lamps, LED type, R,Y,B and breaker 'ON' , 'OFF', 'TRIP' & spring charged lamps.
-
-
-
... More
BUS BAR
-
-
-
... More
FP Alluminium busbar of 400A with 50 KA fault level capacity, mounted on non-hygroscopic, glass fibre reinforced insulators-1Set
-
-
-
... More
OUTGOINGS :-
-
-
-
... More
(a)100A, 25KA TPN MCCB (Thermal Magnetic Release)- 2No
-
-
-
... More
(b)63A, 10KA TPN MCB- 12 Nos
-
-
-
... More
(c)40A, 10KA TPN MCB - 4 Nos
-
-
-
... More
(d) 32A, 10KA SPN MCB – 4 Nos
-
-
-
... More
(e)1 Lot of control wiring & outgoing feeder indication lamps 1 Set of designation plates.
-
-
-
... More
(f)Two numbers 50mm X 6mm GI earthing terminals - one on each side of the panel with earth strip run inside the panel
-
-
-
... More
Earthing with GI earth plate 600 mm X 600 mm X 3 mm
thick including accessories, and providing masonry enclosure
with cover plate having locking arrangement and watering pipe
of 2.7 metre long etc. with charcoal/ coke and salt as required.
26
7472
194272
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.
20
144
2880
... More
Supplying and fixing 6 SWG dia G.I wire on surface or recess for loop earthing aws required.
350
70
24500
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (For light & Socket)
450
233
104850
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
450
275
123750
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
500
334
167000
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
500
439
219500
... More
4 X10 sq. mm + 2 X 6 sq. mm earth wire
550
1005
552750
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
... More
100 mm x 50 mm x 1.6 mm
50
669
33450
... More
150 mm x 50 mm x 1.6 mm
50
716
35800
... More
225 mm x 50 mm x 1.6 mm
35
895
31325
... More
300 mm x 50 mm x 1.6 mm
30
963
28890
... More
Providing and fixing of maintenance free earthing which consists of 40mm standrad Dia ,standrad length (as per Equipment Supplier ) electrode capsule,filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancing compound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete.
10
21083
210830
... More
Supply and laying under ground/above ground of following size strips including all necessary interconnections between earth station and equipments including earth excavation, back filling, intermediate supports for strips as applicable and directed by engineer in charge.
-
-
-
... More
25x5mm Copper strip on DMC insulators
950
978
929100
... More
SUB HEAD XXVI - AIR CONDITIONING SYSTEM
-
-
-
... More
Supply, Installation, testing and commissioning of 2 Ton capacity 5 Star rating split unit air conditioners as per BEE and ISEER with 20813 Btu/hr cooling capacity, Rotary compressor and R32 Refrigerant, 100% copper condenser type with compressor, condenser, evaporators including Pre-set mode to provide the right cooling comfort, optimises power usge in real time and integrate advanced sensors and micro controllers cooling and fan speed, energy saving, 4 way swing and anti-corrosive blue film for protection on condenser and evaporators etc. and including 1set MS bracket suitable for fixing out door unit of split AC unit. As directed by Engineer-in-Charge.
23
50119
1152737
... More
Supply, Installation, testing and commissioning of 1.5 Ton capacity 5 Star rating split unit air conditioners as per BEE and ISEER with17000 Btu/hr cooling capacity, Rotary compressor and R32 Refrigerant, 100% copper condenser type with compressor, condenser, evaporators including Pre-set mode to provide the right cooling comfort, optimises power usge in real time and integrate advanced sensors and micro controllers cooling and fan speed, energy saving, 4 way swing and anti-corrosive blue film for protection on condenser and evaporators etc. And including 1set MS bracket suitable for fixing out door unit of split AC unit. as directed by Engineer-in-Charge.
20
45483
909660
... More
Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for the following KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for Air-conditioner for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete.
-
-
-
... More
(a) 4 KVA
20
5118
102360
... More
(b) 5 KVA
23
5811
133653
... More
HVAC [LOW SIDE ITEMS] Supply, installation and testing of the following sizes of Refrigerant Piping consisting of Copper tubes of wall thickness 20G/22G inclusive of Suction Gas Piping & Fittings,Liqid Line Piping & Fittings, between indoor and outdoor unit with class "O" nitrile rubber Insulation with finish as required.The piping to be mounted & supported properly with suitable size of clamp, M.S.hanger, tray etc., as required at site. The insulation shall be closed cell/cross linked elastomeric Nitrile rubber of thickness 13/19 mm.The insulation thickness upto 19.1 mm dia pipe shall be 13 mm and above 19.1 mm dia, the insulation thickness shall be 19 mm.Testing of refrigerant piping and procedure shall be done as per Manufacturer's recommendations
-
-
-
... More
Provisioning and fixing of following size of copper Refrigerator tubing with 6 mm thickness insulation Nitrile rubber and aluminium foil sheet above with clamps, ties etc complete in all respect.( This is over and above the standard length of 3 mtr supplied along with Item Ser No. 74&75 Above).
-
-
-
... More
Ǿ6.4 mm
40
1239
49560
... More
Ǿ9.5 mm
40
1426
57040
... More
Ǿ12.7 mm
40
1682
67280
... More
Ǿ15.9 mm
40
2201
88040
... More
Supply, installation and testing of UPVC Drain Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings (Including enlarger, bends, T Joints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap.
160
692
110720
... More
Supply, installation,testing and commissioning of pvc insulated armoured copper cable between indoor unit and outdoor unit with supports ,clamping,end terminations,as per standerd length of the following sizes, complete . (a) 4cx2.5sq.mm copper pvc insulated cable
350
517
180950
... More
SUB HEAD XXVII – WATER COOLERS
-
-
-
... More
Supply installation of 40/80 lTRS Capacity Water Coolers with RO water Purifier ,including necessary fittings all as per manufacturers specifications etc., complete
2
80837
161674
... More
SUB HEAD XXVIII – DG SET
-
-
-
... More
Supply, installation, testing and commissioning of Diesel generator set of 200 KVA, and including AMF Panel out door type, 3-phase, 415 volt, 50 HZ, Power factor 0.8 pf lagging, Silent type – Noise level at 1 metre 75 dBA (with canopy), Fuel Tank capacity 400 Ltrs. ENGINE output (Prime Continuous rating as per ISO 8528-1), 6 cylinder, 6 cubic capacity, 105 X 125 bore stroke, 1500 RPM, Lubricantion change period- 500 hrs. Lube Oil capacity – 25 ltrs.coolant capacity- 28.9 ltrs, Adblue/DEF capacity – 45 ltrs. ALTERNATOR insulation class – H, Efficiency (AT 100% LOAD) 0.8 pf as per standard IEC 60034-1), Alternator set mounted on common base frame in outdoor type acoustic enclosure with canopy, inbuilt Suitable Standard tank ,with control Panel,battery, battery charger, return fuel cooler, anti vibration mounting pads including residential silencer, pcc based auto start & synchronization set, safeties with accessories as per specification complete as required. DG st shall be complinces with PCBC norms Diesel engine shall conform to IS:10000 and alternator shall be self excited complete with AVR to IS:4722. NOTE - DG Set shall be Install on the PCC Platform. (Note- PCC Platform shall be measured and paid separately).
1
2674702
2674702
... More
SUB HEAD XXIX - LAN SYSTEM
-
-
-
... More
Supply and fixing of 24Port with POE 2xSFP Managed Switch
2
106935
213870
... More
Supply and fixing of 24Port Patch Panel
3
29070
87210
... More
Supply of 1Gigabit Ethernet SFP+ module, LC connector.
3
19311
57933
... More
Supply of 1Gigabit Ethernet SFP+ passive cable assembly, 1m length. (1m SFP+ Cable).
3
12085
36255
... More
Supply and fixing of AP 802.11n/ac with Dual Radio Integrated Antenna AP, Mount Basic White Kit,Ethernet Indoor Rated Midspan Injector, PC-AC-IN India AC Power Cord & LIC-AP Controller per AP Capacity License ELTU with Necessary Items.
12
62196
746352
... More
Supply and fixing of keystone unshielded outlet 180DG,C6 yellow
40
1027
41080
... More
Supply and fixing of Supply of face plate shuttered UK style,dual
40
1155
46200
... More
Supply and fixing of high speed gigabit ethernet UTP Cat 6 Unarmoured Cable,C6
200
48
9600
... More
Supply of high speed gigabit 24AWG UTP Patch cord,LSZH,C6,yellow(1mtr)
40
274
10960
... More
Supply and fixing of 12Core Single mode OFC cable for UpLink
300
95
28500
... More
Supply and fixing of 8Port LIU Loaded with Adapter Plates and Pigtails.
3
3281
9843
... More
12U rack -Wall Mounted Rigid frame construction, Vented front glass door with a fully vented rear steel door, Top cover with gland plate and single fan cut out, powder coated with black shade with required power distribution Unit. Rate Shall include Single Phase 16A PDU with required no. of sockets.
1
17774
17774
... More
Fluke Testing for DATA & Voice
40
167
6680
... More
SUB HEAD XXX– STREET LIGHT WITH LED
-
-
-
... More
Supply anfd fix 3meter round lightingPole of size (Bottom 114x1000x3mm, Top 89x2000x3mm and Bottom plate 200x200x10mm) and including one coat of zink red oxide primer with two coats of silver aluminium paint, 01 metre of designed single arm bracket, M16x500 mm foundation bolts with nuts and washer set, In built electrical box with MCB SP 6Amps,4Pole connector,3core x 1.5 Sqmm copper cable required length. 50 Watts capacity LED Street light fitting IP-65 complete all as manufacturer specification and as per approved makes.
14
9945
139230
... More
Supply and fix post top lantern fitting 40 Watt 40w Gate light (IP65) complete all as specified or as directed.
18
8076
145368
... More
1:4:6 (1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggegate 40mm nominal size derived from natual sources ) for foundation of light poles.
2
6812
13624
... More
1:3:6 (1 cement : 3 manufacture sand derived from recycle Agreegate : 6 graded stone aggegate 40mm nominal size derived from natual sources ) for copingof light poles.
1
5639
5639.85
... More
Supply and fix for Polel wall mounted Junction Box, made up of sheet moulding compound (SMC) Type with hinged type door band locking arrangement, whote colour of size 280x170x130 mm out side and 240x130x110mm internal dimensions comprising 01 No- 6 Amps capacity,aluminium busbar-04 Nos, earthing terminals, bolts & nuts including connecting up cables with aluminium terminal lugs and suitable size of clamps, bolts, nuts and washers fixed on pole complete all as specified and as directed and including taking down unserviceable junction box as directed. Make – SINTEX or equivalent ISI marked.
4
1502
6008
... More
Supply of following size 1.1KVgrade XLPE insulated armoured aluminium conductor underground cable, in built up cable trench/ already laid RCC hume pipe / on surface of slab and walls with clamps or on cable tray with all installation materials. The cable shall conform to IS.
-
-
-
... More
4 C X 16Sq.mm Aluminium
160
479
76640
... More
4 C X 10Sq.mm Aluminium
150
449
67350
... More
4 C X 6Sq.mm Aluminium
100
329
32900
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1100 volts grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
(a) Upto 35 sq. mm
400
387
154800
... More
Providing spiral coil earthing with 8 SWG G.I wire including spreading os salt and charcoal as per IS: 3043-87 with lastest ammendments.
18
2714
48852
... More
Supplying and laying 6 SWG GI wire at 0.50 metre below ground level for conductor earrth electrode, including connection/ termination weith GI thimble etc. As required.
30
51
1530
... More
SUB HEAD XXXI- SOLAR SYSTEM
-
-
-
... More
Supply, Erection, Testing & Commissioning of Solar PV Modules
(Mono PERC, 540-550Wp) - REC, Q-Cells, Vikram, Waaree
Type: Monocrystalline PERC(Tier-1 Panels)
Efficiency: 21%
Warranty: 25 Years
Certifications: IEC 61215, IEC 61730
106
16000
1696000
... More
Supply, Erection, Testing & Commissioning of Grid-Tied Inverter
(50 kW, 3-Phase) - SMA, Fronius, Delta (High Efficiency 98%)
Efficiency: 98%
Input Voltage: 600-1000V DC
Output: 415V, 3-Phase AC
Protections: Anti-Islanding, MPPT, Overvoltage
1
450000
450000
... More
Supply, Erection, Testing & Commissioning of Mounting Structure (Hot-Dip Galvanized, MS Steel) - IS 2062, HDG 80 µm
Material: Mild Steel (Wind Load Rated)
Coating: 80 micron Hot-Dip Galvanization
Wind Load: 150 km/h
2000
100
200000
... More
Supply, Erection, Testing & Commissioning of Lightning Protection System (ESE Type) - Indelec, ABB (Complete Earthing)
Type: Early Streamer Emission (ESE)
Coverage: 60m Radius
Material: Copper/Aluminum
Standard: NFC 17-102
1
60000
60000
... More
Supply, Erection, Testing & Commissioning of DC Cables (4 sq. mm, Cu) - Polycab, KEI, Finolex (UV Resistant)
Material: Copper
Insulation: XLPE, UV Resistant
Voltage Rating: 1000V DC
Standard: IEC 62930
500
80
40000
... More
Supply, Erection, Testing & Commissioning of AC Armoured Cables (16 sq. mm, Al) - Polycab, KEI, Havells
Material: Aluminum
Insulation: XLPE, Armoured
Voltage Rating: 1100V AC
Standard: IS 1554
200
125
25000
... More
Supply, Erection, Testing & Commissioning of Connectors (MC4) - Stäubli, Amphenol (IP67 Rated)
Type: MC4 Compatible
Current Rating: 30A
Voltage: 1000V DC
IP Rating: IP67
120
600
72000
... More
Supply, Erection, Testing & Commissioning of ACDB & DCDB - Schneider, ABB, L&T
Type: Protection & Distribution Boards (Complete Protection)
Breakers: MCB, MCCB, SPD
IP Rating: IP65
Standard: IEC 61439
1
70000
70000
... More
Supply, Erection, Testing & Commissioning of Step-up Transformer (50 kVA, 415V/11kV) Oil Cooled)(- Siemens, Schneider
Type: Oil Cooled
Efficiency: 98%
Standard: IS 2026, IEC 60076
Cooling: ONAN
1
315000
315000
... More
Supply, Erection, Testing & Commissioning of Control Cables (2.5 sq. mm, Cu) (Shielded) - Polycab, Havells
Material: Copper
Insulation: PVC, Shielded
Voltage Rating: 600V
Standard: IS 694
100
90
9000
... More
Supply, Erection, Testing & Commissioning of Concrete Works (Foundation, RCC) (For Mounting) - M25 Grade including Shuttering & Reinforcement.
Mix Ratio: 1:1.5:3
Strength: 20 MPa
Standard: IS 456
5
20000
100000
... More
Supply, Erection, Testing & Commissioning of Painting & Anti-Corrosion Coating (Weather Resistant) - Epoxy Based
Type: Epoxy Primer & Paint
Thickness: 100 micron
Standard: IS 13607
50
300
15000
... More
Supply, Erection, Testing & Commissioning of SCADA & Monitoring System (Remote Monitoring) - SMA, Fronius
Communication: Ethernet/Wi-Fi
Data Logging: Real-time
Display: Web & Mobile App
Standard: IEC 61724
1
130000
130000
... More
SUB HEAD XXXII - EXTERNAL WATER SUPPLY
-
-
-
... More
Conducting Geographycal Survey in the respective area for bore well and submission of details report.
1
11381
11381
... More
Drilling and developing of 150mmk dia bore wells by DHT method in any type of soil, conducting yield test as per V Notch method and subssion of yield report, including filling of filter media, clamps, MS cover etc. Complete.
-
-
-
... More
0-100 mtrs
100
462
46200
... More
101-200Mtrs
100
996
99600
... More
201-280 Mtrs
80
1565
125200
... More
Supply and install MS suitable size plain casing pipe for 150 mm dia bore.
60
2241
134460
... More
Supply nand install HDPE pipe PE-80 grade (12.5 kg/sq.cm) of 63mm OD for bore well.
280
400
112000
... More
Supply, Erection, testing and commissioning of 3 cu.m/hr at 70 m head submersible pump set 3 phass-415 v.50 Hz, 10 HP/ 12 stages,2900 RPM as approved by Engineer-in-charge at site .
1
543060
543060
... More
Supply,laying, testing and commissioning of medium grade GI pipes for following conforming to IS 1239 part-1 including qall necessary GI fittings. like- Unions, Bends, Nipples etc. Complete.
-
-
-
... More
(a) 20 mm dia bore
400
368
147440
... More
(b)25mm dia bore
200
467
93550
... More
(c) 32 mm dia bore
300
540
162090
... More
(d) 40 mm dia bore
100
617
61705
... More
(e) 50 mm dia bore
300
762
228645
... More
Supply, fixing and testing pvc insulated screened PVC sheathed LT weather proof submersible cable cable 1100 volts grade stranded copper conductor, cross sectional are 10 Sqmm 3 core, complete all as specified and as directed.
350
1073
375550
... More
Constructing masonry Chamber 90x90x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
10354
10354.95
... More
Providing and fixing gun metal Gate Valve with C.I. wheel of approved quality (Screwed End)
-
-
-
... More
(a) 20 mm dia bore
4
539
2159.8
... More
(b)25mm dia bore
1
622
622.4
... More
(c) 32 mm dia bore
1
689
689.6
... More
(e) 50 mm dia bore
1
1026
1026.65
... More
Providing and fixing gun metal non-return valve of approved quality vertical type of size 50mm nominal bore.(Screwed end)
1
1445
1445
... More
Earthing with G.I earth plate 600x600x6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. With charcoal / coke and salt as required.
2
7472
14944
... More
Supply and laying 25mm X 5mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolts, spring, washers, etc. As requirewd.(Jointing shall be done by overlapping and with 2 sets of GI nuts bolts and spring washer spaced at 50mm.
20
144
2880
... More
Supply, installation,testing and commissioning of weather proof type box (IP-55) made out of 2mm thick CRCA sheet including painting with epoxy powder coating. The box shall be consisting of Star-Delta starter suitable for 3 Cm/ hr and 200 metres head pump motor with MCCB contractor over load relay, ON/OFF push button Non/off / TRIP indication, Ammeter with resin cost Cls and selector switch voltmeter with selector switch. The box shall be suitable for terminating suitable cable. The box shall be mounted on suitable angle frame work of 450 mm height on a PCC pedestal including all materials complete.
1
48948
48948
... More
Supply and fix Sheet metal box enclosure suitable size and including MCCB100 Amps capacity, 50 Hz, 16 KA, 3 phase,4 pole to connnect bore well submewrsible pump set with 3 core flat copper conductor, all as specified.
1
8326
8326
... More
SUB HEAD XXXIII- EXTERNAL ELECTRIC SUPPLY
-
-
-
... More
VCB : Supply, installation, testing and commissioning of incomer 630A, 3P, 11 KV Indoor type, drawout, Vacuum circuit breaker Panel board fabricated out of minimum 2 mm thick CRCA sheet as per specification. The panel shall be complete with all accessories & cable termination boxes for incoming 3C x 120 Sqmm XLPE and outgoing 3C x 120 Sqmm XLPE, 11 KV cable. All current carrying parts should be of Copper.
1
908053
908053
... More
a)The panel shall be comprising of 1 no, 11 KV, 650A,3P, drawout type vacuum circuit breaker with spring charged stored energy mechanism having spring charging motor 240VAC, Closing coil suitable for 24V DC, Tripping coil suitable for 24V DC, Aux. Contacts 6NO+6NC, Antipumping device, Mechanical Close & Trip Lever, Manual spring charging device, mechanical operation counter, mechanical ON/OFF, Mechanical spring charged indication
-
-
-
... More
i)One (1) number multi function meter with RS 485 port with minimum parameters Voltage, Ampere, KWH, KVAh, KW, KVA, KVAR, PF & HZ. with 1 Set (3 Nos) of 50/5A ratio,CL 1.0 C.T,s & control fuses.
-
-
-
... More
ii)1 Set of phase indication lamps with HRC fuses (Red, Yellow and Blue).
-
-
-
... More
Iii)1 Set of indication lights with HRC fuses for CB open, CB close, Auto trip, Spring charged, battery low`.
-
-
-
... More
iv)Auxillary switch/ relay, under voltage, master trip, Anti-pumping relay and other control relays etc. as per requirement -Lot. 1 Set of IDMTL O/C and E/F relay similar to CDG-61 of M/s ALSTOM or equivalent complete with 3 nos. (1 set). Current transformer 50/5A, CL-5P 10 for protection, 15 VA burden.
-
-
-
... More
v)1 Set of potential transformer 11KV/1.732, 110/1.732 volts 100 VA burden.
-
-
-
... More
vi)1 set of 6 window, Audio / visual annunciation system complete feeders trouble & protection trip annunciation.
-
-
-
... More
TRANSFORMER : Supply, installation, testing and commissioning of 11 KV/ 433V, 3 phase, 50 Hz delta/star-11 connected, in door type, 400 KVA Transformer, oil immersed ON cooled, Copper wound, complete with all fittings such as oil conservator, silica gel breather, thermometer, explosion vent, On Load tap changer with + 5 % to – 7.5 % tappings in the steps of 2.5%, bi-directional roller, diagrams & rating plate, Oil gauge, Oil temperature indicator, & Winding temperature indicator, weather proof Marshalling Box, lifting lugs, first filling of oil, weather proof H.T. cable box & disconnecting chamber/ LT cable box & disconnecting chamber, (All instrument/relay/CT terminals / contacts wiring to be done upto marshalling Box). etc. complete as per specification
1
2153674
2153674
... More
i)All relays, contacts & CT terminals to be wired upto marshalling box.
-
-
-
... More
ii)Enclosure shall be of split up type so that top portion of the enclosure can be removed without disturbing core-coil assembly for shifting purpose.
-
-
-
... More
MAIN MV PANEL
-
-
-
... More
Supply, installation, testing and commissioning of 3 phase and Neutral 433V 4 wire free standing floor mounted indoor type MV Panel made out of 2mm thick CRCA sheet for main frame and 1.6 mm thick for partions after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar 650 Amps rated (at the rating 1.0 Heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below and as per Technical specification. The panel shall be got fabricated from manufactures with CPRI Test certificate only. The PCC shall have atleast two spare cubicles to suit the highest rating outgoing MCCB. The size of all Panel Mounting Meters shall be 96X96 mm. The Panels shall be mounted on U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF push buttons, ON/OFF / Trip indication lamps of LED type and shunt trip coils wherever Electrical Interlocking is specified. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely. All ACBs/MCCBs 160A and above shall be with Micro processor releases. All CTs/CBCT shall be resin cast type. All MCCBs below 160A shall be with adjustible Thermal magnetic releases. All ACBs/MCCBs shall be Icu=Ics=100%. All MCCBs shall be provided with spreader links and Rotary handles.
1
1163886
1163886
... More
a) Transformer Incomer : 650 A FP EDO, ACB 50KA micro processor release O/L,S/C, E/F protection,TNC,under voltage release.
-
-
-
... More
i)Metering & protection for each transformer Incomer :
-
-
-
... More
ii)0-500V Digital Voltmeter with selector switch and MCBs
-
-
-
... More
Iii)500 A Digital Ammeter with selector switch
-
-
-
... More
iv)Multifunction meter with RS 485 ci-0.5-1set
-
-
-
... More
v)500/5-5A,15 VA,Cl-0.5 CTs resin cast including 1 for APFCR & 1 for RPR
-
-
-
... More
vi)LED Phase indication lamps with individuals MCBs and control with toggle switches -1set
-
-
-
... More
vii)ON /OFF/TRIP indication lamps
-
-
-
... More
viii)Spark Gap Surge Separator.
-
-
-
... More
ix)Reverse power relay & Voltage monitoring relay
-
-
-
... More
b) DG Incomer -1: 400 A FP EDO, ACB 35 KA micro processor release O/L,S/C, E/F protection,TNC,under voltage release-1nos
-
-
-
... More
i)250 A TP MCCB with DOM 45KA thermal megnetic release,ON OFF indication light-1set.
-
-
-
... More
ii)Metering & protection for DG Incomer :
-
-
-
... More
Iii)0-500V Digital Voltmeter with selector switch and MCBs
-
-
-
... More
iv)500 A Digital Ammeter with selector switch
-
-
-
... More
v)Multifunction meter with RS 485 ci-0.5-1set
-
-
-
... More
vi)500/5A,15 VA,Cl-0.5 CTs resin cast including 1 for RPR - 4 nos
-
-
-
... More
vii)LED Phase indication lamps with individuals MCBs and control with toggle switches -1set
-
-
-
... More
viii)ON /OFF/TRIP indication lamps
-
-
-
... More
ix)ON /OFF Push button
-
-
-
... More
c) CHANGE OVER SWITCH :-
-
-
-
... More
(a) 650A 35KA 4P Motorized Chage Over set – 1 No
-
-
-
... More
(b) 400A 35KA 4P MCCB – 1 No
-
-
-
... More
d) BUS COUPLER :
-
-
-
... More
i) 650 A FP EDO, ACB 50KA micro processor release O/L,S/C, E/F protection,TNC switch,under voltage release auxilary contactor.
-
-
-
... More
ii)ON /OFF/TRIP indication lamps,MCB, Castle lock etc as required.
-
-
-
... More
iii)Mechanical & electrical interlocking with PLC to complete the jobiii)
-
-
-
... More
e) BUSBAR : 650A TPN Aluminium Busbar with heat shrinkable sleeve- 1 Set
-
-
-
... More
OUT GOING :
-
-
-
... More
i) MCCB 250A TP+NL 25 KA TM release with O/L,S/C protection,rotary handle,spreader link etc - 01 nos
-
-
-
... More
ii) MCCB 100A TP+NL 16 KA TM release with O/L,S/C protection,rotary handle,spreader link etc - 02 nos
-
-
-
... More
iii) MCCB 63A TP+NL16 KA TM release with O/L,S/C protection, rotary handle,spreader link etc - 04 nos
-
-
-
... More
iv) MCB 40A TP+NL16 KA – 02 Nos
-
-
-
... More
v)70 KVAR, 525V, Capacitor bank, MPP (Heavy duty) with 14% detuned reactor.
-
-
-
... More
vii) Timer switch for street light feeder.
-
-
-
... More
Supply, testing and commissioning of following size 11KV (E) grade XLPE insulated armoured aluminium conductor under ground cable, The cable shall conform to IS 7098/ Part I.
-
-
-
... More
a) 120 sq.mm 3 Core
200
4171
834200
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
150
525
78750
... More
Supply, testing and commissioning of following size 11KV (E) grade XLPE insulated armoured aluminium conductor under ground cable, The cable shall conform to IS 7098/ Part I.
-
-
-
... More
a) 400 Sqmm 3.5 Core.
100
6942
694200
... More
b) 70 Sqmm 3.5 Core.
150
1474
221100
... More
c) 16 Sqmm 4 Core.
40
479
19160
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1100 volts grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
(a) Upto 35 sq. mm
70
387
27090
... More
(b) Above 35 sq. mm and upto 95 sq. mm
100
405
40500
... More
(c) Above 185 sq. mm and upto 400 sq. mm
20
474
9480
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
8
13838
110704
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
16
7472
119552
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm).
80
972
77760
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
160
144
23040
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.pipe from earth electrode including connection with brass nut,bolt, spring, washer excavation and re-filling etc. as required.
10
1551
15510
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
10
706
7060
... More
Supply and making indoor cable end joint with Heat shrinkable jointing kit complete with all accessories including lugs suitable for following size 3 core, XLPE aluminium conductor cable of 11 KV graded as required.
-
-
-
... More
120 sqmmn
2
14968
29936
... More
Supply and making outdoor cable end joint with Heat shrinkable jointing kit complete with all accessories including lugs suitable for following size 3 core, XLPE aluminium conductor cable of 11 KV graded as required.
-
-
-
... More
120 sqmmn
4
20100
80400
... More
Supply and making end termination with brass compression gland and aluminium lugs for following size PVC insulated and PVC sheathed /XLPE aluminium conductor cableof 1.1 KV grade as required.
-
-
-
... More
i) 3x16 sqmm (22mm)
2
270
540
... More
ii) 3.5x70 sqmm (35mm)
2
369
738
... More
iii) 3.5x400 sqmm (82mm)
8
1556
12448
... More
Supplying and fixing of light class G.I pipe of 80 mm dia (nominal) 3 metres length along the pole for protection of under vground cable as required.
3
3606
10818
... More
Supplying and erection of 11 KV pin insulator complete with large steel head GI pin, nuts washers etc. As required.
6
3121
18726
... More
Supply nand fix Gang Operated Air Break Switch(GOD) HT 11 KV, out door type suitable for horizontal or vertical mounting fixed type complete with 9 insulators of rating 630 Amps, complete all as specified or as directed by Engineer-In-Charge.
1
57387
57387
... More
Supply and fix Lightning Arrestor HT 11 kv 10 KA station class, complete all as specified and as directed.
1
13180
13180
... More
Supply of the following safety items as per standards and specification
-
-
-
... More
Supply & Installation of Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete, confirming to IS: 2878.
4
5053
20212
... More
Supply & Installation of Water CO2 Type fire extinguisher of 9 Ltrs. Capacity, filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete confirming to IS: 940.
2
2679
5358
... More
Rubber Mats 11kV, 2 m x 1 m
2
3461
6922
... More
Rubber Mats 415 V, 2 m x 1 m
4
2076
8304
... More
Shock treatment Chart with wooden frame and glass
2
2769
5538
... More
First Aid Box
2
1730
3460
... More
3 Nos of buckets with canopy & stand
3
2076
6228
... More
415 V Danger Boards
1
1038
1038
... More
11KV Danger Boards
1
1038
1038
... More
11 KV Hand Gloves
2
3045
6090
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements