Defence Research And Development Organisation Tender

BOQ ITEMS: TORQ SET BITS 3mm, TORQ SET BITS 4mm, TORQ SET BITS 5mm, TORQ SET BITS 6mm, TORQ SET BITS 8mm, SLOTED TORQUE BIT , PHILLIPS TORQUE BIT PH 0, PHILLIPS TORQUE BIT PH 1, PHILLIPS TORQUE BIT PH 3, SOCKET HEAD TORQUE BIT 2MM, SOCKET HEAD TORQUE BIT 2.5MM, SOCKET HEAD TORQUE BIT 3MM, SOCKET HEAD TORQUE BIT 4MM, SOCKET HEAD TORQUE BIT 5MM, SOCKET HEAD TORQUE BIT 6MM, SOCKET HEAD TORQUE BIT 7MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 4.5MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 5.5MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 6.5MM, SCREW DRIVERS FOR SLOTTED SCREWS DRALL DRIVER 8MM, STAINLESS STEEL SCREWDRIVERS FOR PHILLIPS SCREWS SIZE 30, STAINLESS STEEL SCREWDRIVERS FOR PHILLIPS SCREWS SIZE 36, HEXAGON KEY WRENCHES SIZE 1.5MM TO 10MM, HEXAGON KEY WRENCHES SIZE 12MM, HEXAGON KEY WRENCHES SIZE 14MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 4MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 5MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 6MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 7MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 8MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 10MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 12MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 14MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 17MM, 1/2 DRIVE METRIC HEXAGON BIT SOCKETS SIZE 19MM, FEELER GAUGE , RADIUS GAUGE Range 1 to 7 mm, SCREW PITCH GAUGE 0.25 to 6 mm , TORQUE SCREWDRIVER 2 to 10MM, METRIC RATCHET COMBINATION WRENCHES SIZE 10MM, METRIC RATCHET COMBINATION WRENCHES SIZE 13MM, VERNIER CALIPER Range 0 to 150, VERNIER CALIPER Range 0 to 300, MEAURING TAPE Range 5M, MEAURING TAPE Range 10M, MEAURING TAPE Range 30M, STEEL RULE Range 150mm , STEEL RULE Range 300mm, STEEL RULE Range 600mm, STEEL RULE Range 1M, WEIGHING MACHINE Range 0 to 100kg, WEIGHING MACHINE Range 0 to 500kg, WEIGHING MACHINE Range 0 to 1500kg, Flat half cut files with handle, FLAT BASTARD FILES WITH HANDLE, HALF-ROUND SECOND-CUT FILES WITH HANDLE, HALF-ROUND BASTARD FILES WITH HANDLE, SECOND-CUT ROUND FILES WITH HANDLE, ROUND BASTARD FILES WITH HANDLE, SECOND CUT SQUARE FILES WITH HANDLE, SQUARE BASTARD FILES WITH HANDLE, SECOND CUT TRIANGLE FILES WITH HANDLE, TRIANGLE BASTARD FILES WITH HANDLE, HALF ROUND SECOND CUT RASPS MEDIUM CUT, HALF ROUND BASTARD RASPS LARGE CUT, ROUND SECOND CUT RASPS MEDIUM CUT, FLAT RASPS MEDIUM CUT, NEEDLE FILES, EMERY PAPER GRADE 120, EMERY PAPER GRADE 220, EMERY PAPER GRADE320, WIRE TWISTING WRENCH, TWISTING WIRE DIA 0.8 MM 1 SPOOL 8KGS, LED TORCH, PLIER, NOSE PLIERS, TUBULAR HACKSAW, SMALL ANGLE GRINDER SIZE 4, DRILL MACHINE SIZE 13MM, TORQUE WRENCH RANGE 120 to 600 nm , TORQUE WRENCH RANGE 10 to 50 nm , TORQUE WRENCH RANGE 20 to 100 nm , TORQUE WRENCH RANGE 70 to 340 nm , INSULATED GLOVES, SAFETY OVER GLOVES, OUTSIDE PULLER, INSIDE PULLER, LOCKING TWIN SLIP JOINT MULTIGRIP PLIERS 22MM, LOCKING TWIN SLIP JOINT MULTIGRIP PLIERS 28 MM, DOUBLE END OPEN SPANNER SIZE 6 TO 32, LONG METRIC KEY L TYPE 1.5 to 18 mm, METRIC OFFSET RING WRENCHES SIZE 6 TO 22, METRIC OPEN END BITS drive 9x12 mm 16 to 19 mm, METRIC OPEN END BITS drive 14x18 mm 13 to 32 mm, hex bolt nut and washer M6 into 50, hexboltnut and washerM6 into100, hexboltnut and washerM8 into 50, hex bolt nut and washer M8 into 100, hex bolt nut and washer M10 into 5, hex bolt nut and washer M10 into 100, hex bolt nut and washer M12 into 50, hex bolt nut and washer M12 into 100, Socket Head Cap Screw Nut and Washer Size M6 into 50, Socket Head Cap Screw Nut and Washer Size M6 into 100, Socket Head Cap Screw Nut and Washer Size M8 into 50, Socket Head Cap Screw Nut and Washer Size M8 into 100, Socket Head Cap Screw Nut and Washer Size M10 into 50, Socket Head Cap Screw Nut and Washer Size M10 into 100, Socket Head Cap Screw Nut and Washer Size M12 into 50, Socket Head Cap Screw Nut and Washer Size M12 into 100, metric crowfoot open end bits, crane scale , Tweezers