Centre For Cellular And Molecular Biology Tender

Demolishing lime concrete / cinder with cement mortar manually / by mechanical means and disposal of material within 50 metre lead as per direction of Engineer-in-charge.

Demolishing brick work manually/ by mechanically means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Enginer-in-charge. In cement mortar

Dismantling doors , windows , and clearstory windows ( steel or wood ) shutter including chowkhats , architrave , holdfasts etc. Complete and stacking within 50 metres lead : Of area 3 sq. Metres and below

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Removing mortar from and cleaning stones and concrete articles ( net quantity of stacks of cleaned materials will be measured ) : In cement mortar

Earth work in excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) , including dressing of sides and ramming of bottoms , lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m . All kinds of soil

15mm cement plaster on rough side of single or half brick wall of mix : 1:6 ( 1 cement : 6 coarse sand )

Providing and fixing aluminium work for doors , windows , ventilators , and partitions with extruded built up standard tabular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285 , fixed with dash fasteners of required dia. and size , including necessary filling up the gaps at juctions , i.e. at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free , straight , mitre and jointed mechanically wherever required including cleat angle , Aluminium snap beading for glazing / panelling , C.P. brass / stainless steel screws , all complete as per architectural drawings and the directions of Engineer - in- charge.( Glazing , panelling and dash fastners to be paid separately ) a ] For fixed portion . Powder coated aluminium ( minimum thickness of powder coating 50 micron )

[ b ]For shutters of doors , windows & ventilator including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid separately ) Powder coated aluminium ( minimum thickness of powder coated 50 micron )

Providing and fixing in glazing in aluminium door , window , ventilator shutters and partitions etc. With EPDM rubber / neoprene gasket etc. Complete as per the architectural drawings and the directions of Engineer-in-charge. ( cost of aluminium snap beading shall be paid in basic item ) With float glass panes of 5 mm thickness( weight not less than 12.50 kg/sqm )

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II , in panelling fixed in aluminium doors , windows shutters and partition frames with C.P. Brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. Complete.

Providing and fixing aluminium round shape handle of outer dia. 100 mm with SS screws etc. complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminium

Providing and fixing aluminium tower bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade , with necessary screws etc. Complete. [ a ] 150 mm x 10 mm

Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size. Size of Tile 600 x 600 mm

Providing and fixing homogeneous Poly VINYL Chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop S-758 , Fevicol SR 998 or equivalent including rolling with light wooden roller weighting about 5kg all complete as directed by Engineer-in-charge , in approved colour and shade including levelling of floor by POP and removing existing damaged PVC flooring etc. complete. 2mm thick sheet

Providing and applying white cement based putty of average thickness 1mm , of approved brand and manufacturer , over the plastered wall surface to prepared the surface even and smooth complete. [ BIRLA PUTTY ]

Applying priming coat with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content leass than 50 grams / litre .

Wall painting with premium arcrylic emulsion paint of interior grade , having VOC ( Volatile Organic Compound ) content less than 50 grams / litre of approved brand and manufacture , including additional coats where required to achive even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work

Providing and laying in position cement concrete of specified grade excluding the cost of centring & shuttering : All work upto plinth level 1:2:4 ( 1 cement : 2 coarse sand ( Zone - III ) derived from natural source : 4 graded stone aggregate 20 mm nominal size derived from natural source )

Providing and fixing Stainless steel A ISI 304 ( 18/8 ) Kitchen sink as per IS : 13983 with C.I. Brackets and stainless steel plug 40 mm , including painting of fittings and brackets , cutting and making good the walls wherever required : Kitchen sink without drain board 610 x 510 mm bowl depth 200 mm

Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand ) : Flush / Ruled pointing

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size ) upto plinth level with : Cement mortar 1:6 ( 1 cement : 6 coarse sand ) Dismantled stone shall be use for construction

Providing and fixing CP 3way swan neck including making hole in granite etc. complete. [ HD ] [ VIJAY MAKE ]