Central Reserve Police Force Tender

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) acleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. TWO COATS

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron)

Double rebate windows providing and fixing of double rebate windows mad of high -performance prefabricated factory -made system aluminum with akzonobel power coating of 60 microns (any ral colour )section for for outer frame should be of 114.7 mmx48.3mm weight of the outer frame shall be 1.33 kg /mtre ,glass shutter frame shall be 0.78 kg /mtre mess shutter frame shall be 65 mm x40.2 mm weight of the messh shuttr shall be 0.74 kg /mtre ,6mm glass beading shall be of 32.57 mm x18mm weight ofthe bead shall be 0.21 kg /mtre .all frame cornercleate (NO SCREWING AT CORNER SHALL BE ALLOWED )glass will be 5mm clear mess will be provided in window complete including all texes

Wiring for light point/Fan point /call ball with 1.5 sqmm FRLS PVC onsulated copper conductor single core cable in surface /recessed steel conduit, with piano type switch , phenolic taminated sheet , suitable size MS box and earthing the point with 1.5 sqmm FRLS PVC insulated copper condutor single core ETC. Group B

Wiring for light/power plugwith 2X4 sqmm FRLS PVC copper conductor single core cable in surface /recessed steel conduit, 2 watt modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper condutor single core cable etc. as required. Inner side building

Wiring for light/power plug with 4x4 sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit alongwith 2 Nos 4 sqmm FRLS PVC insulated copper condtor single core cable for loop earthing as required. Inner side building

Supplying and fixing two module stepped type electronic fan regulator on existing modular plate switch box including connection but excuding modular plate etc. as required.

Suppying and fixing suitable size GI box with modular plate and cover in front in surface or in recess , including providing and fixining 6 Pin 5/6 & 15/16 Amp modular socket outlet and 15/16 Amp modular switch connection etc.

Supplying and fixing brass batten/angle holder including connection etc. as required.

Supplying and fixing 5A to 32 A rating , 240/415 V , 10 K C' curve miniature circuit braker suitable for inductiveload of follwing poles in the existing MCB DB complete with connections, testing and commissioning etc ,as required. Single pole

Supplying and fixing 5A to 32 A rating , 240/415 V , 10 K C' curve miniature circuit braker suitable for inductiveload of follwing poles in the existing MCB DB complete with connections, testing and commissioning etc ,as required. dubble pole

Supplying and fixing following size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module

Supplying and fixing following size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module

Supplying and fixing following size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. : 5/6 A switch outet

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. : 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 15/16 amps switch

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch/socket on existing modular plate & switch box including connection but excluding modular plate etc. as required.size/modules GI box along with modular base & cover plate for modular switches in recess etc. as required. Telephone socket outlet

Supplying and fixing of following size of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required : 20 mm

Supplying and fixing of following size of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required : 25mm

Supplying and fixing of following size of medium class PVC conduit along with the accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required : 32mm

Supplying and fixing call bell /buzzer suitable for single phase 230 V, complete as required.

Providing of Ceiling light round shape sixe 9''

Providing of Insulation tap

Providing of Ceiliing fan

Providing of 10 Sqmm dubble core single phase service wire

Providing of Earthing plate size 9''x9''