Central Board Of Indirect Taxes And Customs Tender

BOOK RACK_2 , BOOK RACK Single Side Addon Center Rack Addon Center Racke Size 900mm Width x 370mm Depth x 1950mm Height. Upright MS 40 x 40 x 1.6 Tube. Side Profile MS Powder coated metal profile of 1.6mm with Acrylic pouch. Band Made of MS Powder coated metal 1.6mm Shelves - Made of MS powder coated metal 1.2mm, supported with brackets. Back Panel Made of MS Powder coted metal 0.8mm. Top panel, Side Panel and Bottom Panel Made of 18mm thk PLT.

BOOK RACK_3 , BOOK RACK Double Side Starter Rack Starter Size 1095mm Width x 700mm Depth x 1950mm Height. Upright - MS 40 x 40 x 1.6 Tube. Side Profile - MS Powder coated metal profile of 1.6mm with Acrylic pouch. Band Made of MS Powder coated metal 1.6mm Shelves - Made of MS powder coated metal 1.2mm, supported with brackets. Back Panel - Made of MS Powder coted metal 0.8mm. Top panel , Side Panel & Bottom Panle - Made of 18mm thk PLT.

Study Carrels Screen , Study Carrels Screen Size 900mm Length x 1650 mm Height and High Table Size 1200mm Length x 600mm Depth x 1050 mm Height, Specification PANELS Aluminium extrusion frame structure corner rounded with ABS connectors, filled with a passive acoustic fibrous cotton structure characterised by high acoustic parameters and upholstered with fabric (various colours available for the same fabric) and Table Specifications Table Top 25mm thick Pre-laminated particle board finished with 2mm PVC Edge Banding on all exposed edges. The table top will be at 750mm height from floor level. Under Structure MS Powder coated sunergy leg with levelers to cater for floor and finished in approved colour powder coating to 50-60 micron thickness. Supporting on MS Powder Coated Cross beams (40X20) ERW tubes the cross beams are joined with the main supports by Hi Tensile Allen bolts at predrilled locations as per the design with 18mm thick Prelaminated twin board shelf finished with 2mm PVC Edge Banding on all exposed edges, Bag hooks.

Crescent 60deg Table Size 1030mm Length X 500mm Depth X 750mm Height , Crescent 60deg Table Size 1030mm Length X 500mm Depth X 750mm Height The table top is in semi curved shape with two edges angled at 60deg & it is from 25mm thick prelam particle board with 2mm PVC edge banding. Each Leg is from Round MS Tube structure of size 44.40 x 1.60mm thick (16g), fixed with high pressure aluminum die cast connector at the top, which is from ADC-12 material. For chemical composition. All 04 legs are fixed with these diecast connectors and the connector to connector are joined by the cross beams of Square shape hollow profiles of 25x25mm, using reverse taper mechanism. Each leg is fitted with Leg bush & adjustable leveller which is an injection moulded in engineering plastic. Product come is knockdown Construction, easy to assemble, All metal & diecast parts comes with powder coating finish of 60-80 microns thick.

Arena , Arena Size 4500mm Length x 1750mm Width x 1200mm Height, Comes with 02 seater sofas 03 no, each sofa will have 02 power + 02 USB charging points, 03 no Genesis Panels Aluminium extrusion frame structure corner rounded with ABS connectors, filled with a passive-acoustic fibrous cotton structure characterised by high acoustic parameters and upholstered with fabric (various colours available for the same fabric) with Table tops on back with 03 power poles, each power pole will have 02 power + 02 USB charging points, & includes 06 no Leaf bar chairs Stackable Chair Polypropylene Seat and Back with Powder coated Legs.

Media Unit with Power Pole and socket without Monitor , Media Unit with Power Pole & socket (No Monitor) Size 1860mm Lenght X 460mm Depth X 1500mm Height Add-on, Media Unit (Comes with 03 Genesis Panels Aluminium extrusion frame structure corner rounded with ABS connectors, filled with a passive-acoustic fibrous cotton structure characterised by high acoustic parameters and upholstered with fabric (various colours available for the same fabric) along with metal stands, one power pole along with 02 power+ 02 USB charging points)

Three Seater Sofa , Three Seater Sofa with Fabric Upholstered Sofa high density resilient polyurethane foam, rown upholstery which is easy to clean comfort Solid rounded armrest which facilitates ergonomic body posture while seating Soft foam for comfort and sinking feeling Demarcated seats with symmetrical stitching lines which makes a statement. Elevated from the ground which facilitates ground clearance for cleaning with powder coating epoxy polyester hybrids thickness of 40-50 microns MS Powdercoated Legs. Size 2050mm Length X 790mm Depth X 790mm Height.

Two Seater Sofa , Two Seater Sofa with Fabric Upholstered Sofa high density resilient polyurethane foam, rown upholstery which is easy to clean comfort Solid rounded armrest which facilitates ergonomic body posture while seating Soft foam for comfort and sinking feeling Demarcated seats with symmetrical stitching lines which makes a statement. Elevated from the ground which facilitates ground clearance for cleaning with powder coating epoxy polyester hybrids thickness of 40-50 microns MS Powdercoated Legs. Size 1450mm Length X 790mm Depth X 790mm Height.

Central Table , Central Table with 18mm thick PLB Top and PC Swage Leg- Black Available Shades for 18 MM Top with Swage Leg 1. Everest White Size 1050mm Lenght x 525mm Depth x 450mm Height 2. Graphite Grey 3. Thanasu Maple 4. Classic Walnut.

2 and 2 seater sofa with side and back panels with acrylic screens , 2+2 seater sofa with side & back panels with acrylic screens Size 1300mm Lenght X 800mm Depth X 1200mm Height Two seater sofa with Fabric Upholstered Sofa high density polyurethane foam with Solid rounded armrest which facilitates ergonomic body posture while seating Soft foam for comfort and sinking feeling. Elevated from the ground which facilitates ground clearance for cleaning. Genesis Panels Aluminium extrusion frame structure corner rounded with ABS connectors, filled with a passive-acoustic fibrous cotton structure characterised by high acoustic parameters and upholstered with fabric (various colours available for the same fabric).

Rectangular Shape Centre Table , Rectangular Shape Centre Table Top Made out of 18mm thick pre-laminated particle board of table top to be finished in approved shade and edges to be finished in matching 2mm thick PVC edge banding, Table top supported on Solid wood leg Size Size 1050mm length x 525mm width x 450mm Height

sofa with side and back panels without laptop table , Sofa with side and back panels without laptop table, Overall Size 2000mm Length X 1360mm Depth X 900mm Height, Table Size 650mm Length X 550mm Depth X 40mm height. Two seat sofa with Fabric Upholstered high density polyurethane foam with Solid rounded armrest which facilitates ergonomic body posture while seating. Soft foam for comfort and sink feeling. Elevated from the ground which facilitates ground clearance for cleaning. Genesis Panels are made of Aluminium extrusion frame structure corner rounded with ABS connectors, filled with a passive acoustic fibrous cotton structure characterised by high acoustic parameters and upholstered with fabric.

Curve Sofa Set , Curve Sofa Set. Rectangle Cushion (F1) of Size 600 L X 675 D X 150 HT, Single Seat with Low Back (F2) of Size 600 L X 675 D X 450 HT, Single Seat with High Back (F3) of Size 600 L X 675 D X 600 HT, Corner Seat with Low Back (F4) of Size 675 L X 675 D X 450 HT, Corner Seat with High Back (F5) of Size 650 L X 650 D X 600 HT, Convex Sofa With Back (F6) of Size 1060 L X 675 D X 450 HT, Convex Sofa With Back (F7) of Size 1060 L X 675 D X 450 HT, Centre Table with Shelf (F9) of Size 600 L X 675 D X 300 HT, End Table (F12) of Size 300 L x 675 D x 18mm Thick. Sofa inner frame structure is made from the combination of treated solid wood (Neem or Pine wood) and plywood. The polyurethane (PU) foam used in Seat & back rest are of 40 density and 32 density respectively. Seat to backrest angle is ergonomically designed to offer the best seating comfort Seat height is normally between Sofa is elevated from ground by about 3 inches using metal powder coated legs, which creates provision for easy cleaning at the same time offers floating look. The fabric used for upholstery is 450 glm.

solid wood Neem Curver Sofa_1 , Curved sofa made of Solid wood neem of Size 4925mm Length X 2800mm width. Sofa inner frame structure shall made from the combination of treated solid wood Neem and plywood. The polyurethane foam used in Seat and back rest are of 40 density and 32 density respectively. Angle between Seat and backrest shall be ergonomically designed to offer the best seating comfort. Seat height shall be between 17 to 18 inches and depth be 20-22 inches. Sofa shall be elevated from ground by about 3 inches using metal powder coated legs, which creates provision for easy cleaning at the same time offers floating look. The fabric used for upholstery shall be 450 gm.

solid wood Neem Curver Sofa_2 , Curved sofa made of Solid wood neem of Size 3500mm Length X 2800mm width. Sofa inner frame structure is made from the combination of treated solid wood Neem and plywood. The polyurethane (PU) foam used in Seat & back rest are of 40 density and 32 density respectively Seat to backrest angle is ergonomically designed to offer the best seating comfort Seat height is normally between 17 to 18 inches and depth is 20-22 inches. Sofa is elevated from ground by about 3 inches using metal powder coated legs, which creates provision for easy cleaning at the same time offers floating look. The fabric used for upholstery is 450 gm.

Solid wood Curver Sofa_3 , Curved Sofa made of solid wood neem of Size 2800mm Length X 2390mm width. Sofa inner frame structure shall be made from the combination of treated solid wood Neem and plywood. The polyurethane (PU) foam used in Seat and back rest shall be of 40 density and 32 density respectively Seat to backrest angle is ergonomically designed to offer the best seating comfort Seat height is normally between 17 to 18 inches and depth is 20-22 inches. Sofa is elevated from ground by about 3 inches using metal powder coated legs, which creates provision for easy cleaning at the same time offers floating look. The fabric used for upholstery is 450 glm.

Pouffe , Pouffe with castors Size 600mm Width x 750mm depth x 725mm Height. Pouffe with castors Size 600mm Width x 750mm depth x 725mm Height. Size of Pouffy is Dia 500 x 500 H including Castors. Writing Table is either from 18mm Hydrosheild material with reverse waterfall edge or from prelam partical board with PVC edge banding finish. The table is supported by metal press formed steel bracket. The table can be used either as writing desk or also as back support. All metal parts comes with black powder coating finish. The product is sturdy & stable, very easy to move, best suitable for training rooms, collab areas, quick meeting / discussion areas.

Movable Book Rack , Movable Book Rack Size 900mm Length x 400mm Depth x 1800mm Height. it is multipurpose mobile product that has a storage, white board marker and provision to mount upto 32 inch TV monitor screen. The product is made from composite materials ie., alumnium extrusions, E1 grame prelam particle board and metal press formed parts. The side panels are of 25mm thk, one is upholstered with laminated fabric and other one is a white board marker. The central portion or the space between two side panels is designed to offer an open storage with multiple storage spaces. Each storage space is about 350Lx400Dx315mm H. There are 05 such storage spaces on each side. The shelves are from E1 grade prelam particle board of 18mm thk with PVC edge banding. So, the space can be used for multiple purposes to keep books, files, stationaries and many more. The Base frame is a press formed steel structure of 8mm thk complying to IS standard 10792009 fixed with 04 castor wheels, two with lock & two without lock. All metal, diecast & alum extrusion parts comes with powder coating finish of 60-80 microns thick. All hardware are of steel 8.8 grade comes with zinc blue / yellow / black passivation. The design of the product is modular, easy to assemble & move.

magazine Rack , Rack is staggered height magazine Rack Size 760mm Width x 430mm Depth x 1000mm Height. Body Complete body made of 18 MM Thick prelam particle board with 2 MM PVC Edge band. Shelf Made of 18 MM Thick prelam particle board with 2 MM PVC Edge band. Construction Knockdown construction.

Movable Laptop Stand , Movable Laptop Stand Size 400mm Lenght x 500mm Depth 675mm Height, Table Top made of 18mm Thick PLB Top. (No Laptop, laptop is only for ref, not included in the cost).

Loung chair with Ms powder coated four legs Size 620mm Length x 640mm depth x 770mm height , Loung chair with Ms powder coated four legs with Fabric Upholstered Cushion Seat & Fabric Upholstered Cushiona Fabric Upholstered Cushion Seat & Fabric Upholstered Cushion Back powder coating epoxy polyester hybrids thickness of 40-50 microns Powdercoated four Legs. Size 620mm Length x 640mm depth x 770mm height, Seat Ht 440mm.

Loung chair with Ms powder coated four legs Size 620mm Length x 600mm depth x 840mm height , Loung chair with Ms powder coated four legs with Fabric Upholstered Cushion Seat & Fabric Upholstered Cushiona Fabric Upholstered Cushion Seat & Fabric Upholstered Cushion Back powder coating epoxy polyester hybrids thickness of 40-50 microns Powdercoated four Legs. Size 620mm Length x 600mm depth x 840mm height, Seat Ht 440mm.

Center Table_1 , Center Table Size 600mm Dia x 550 Height with 18mm thick Pre-laminated particle board finished with 2mm PVC Edge Banding on all exposed edges and MS Powder coated Metal Leg Size 600mm Dia x 550 Height.

Mid back chair with Self Calibrating Multilock Mechansim , Medium Back Chair with Base 640mm in diameter (26 inches) and five-prongs. Base shall be made out of Grey Metal Base Reinforced with bottom ribbing for additional buttress and strength. Castors - Twin Castors 50mm dia castors, Gas lift - Class 4 tested, Upholstery Seat Cushion with pre moulded foam of 50 to 60 density. Density 52 kg/m3, Hardness 12.6kgf at 25% Mechanism. This mechanism is manufactured out of cold Rolled Carbon Steel IS 513 1994 Sheets. The steel components are manufactured with highly precision tools for accuracy in matching other parts for smooth functioning. The steel components are fabricated by using Carbon dioxide welding process for giving uniform surface finish with higher tensile strength. Self Calibrating Multilocked Mechanism. Release lever mechanism for Locking and Gas lift height adjustment. Back Frame is upholstered with Thinner Mesh Adjustable Lumbar Support Allows you to adjust the lumbar support position for good back support and blood circulation. Tension control is below the Seat. Armrest shall be made of Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. Two way adjustable i.e. Height and Swivel Adjustable. Seat is duly upholstered with approved fabric. Seat Size 505W x 485D mm, Back Size 425W x 570H mm, Seat Height 470-570mm, Arms Size -250W x 160-250 Ht. Total Height of the chair Size 990 to 1090mm Ht.

Mid back chair with Centre Tilt Mechanism , Medium Back Chair Frame The frame is made out of 25.4 mm tube of 14 gauge tube confirming to IS 7138 1973, Welded by Carbon dioxide welding process. Base Specially designed 5 pronged structure forged out of CR Sheets of 2 mm thickness. Base of diameter 26 inches for complete stability, extreme durability, sturdiness and pleasant aesthetic looks. Reinforced with Carbon dioxide welding to provide additional strength and support. Twin Castors 50mm dia, Gas lift Class 4. Fasteners High quality hardware conforming to Hardness 38 to 44 and tensile strength 1300 n/mm. IS 1363 1967. Seating Structure Seat is made out of 12mm moulded hot pressed plywood in ergonomic shape fitted with Japanese T nuts and riveted in to the plywood, Upholstery Cushion with pre-moulded foam of 50 to 60kg/m3 density in the shape of plywood. Density 52 kg/m3, Hardness 12.6kgf at 25%, Centre Tilt Mechanism Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob, optimal for good back support. Centre tilt mechanism is fabricated from CR Sheets, undergo through Carbon dioxide welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Armrest Injection moulded polypropylene armrests. Mesh Back on Frame. Back is injected moulded PP. Seat shall be duly upholstered with approved fabric.

Stackable Chair , Stackable Chair Polypropylene Seat & Back Can be ganged for straight line Chrome finish legs with bushes.Seat Size - 440Wmm, Back Size - 440Wmm x 385mm Ht, Seat Height 460mm, Total Height of the chair Size - 845mm Ht.

Chair with Writing Pad , Chair with Writing Pad Frame. The frame shall be made out of 25.4 mm tube of 14 gauge tube confirming to IS 7138 1973, Welded by Carbon dioxide welding process. Powder coating Thermo set. powder coating epoxy polyester hybrids of hardness (pencil) HB 74 and impact resistant (in lab) 60 to 160 kgs per cm and to a thickness of 40 to 50 microns shall be carried out of 7 step pretreatment process. Fasteners High quality hardware conforming to Hardness 38 to 44 and tensile strength 1300 n/mm. IS 1363 1967 Seating Structure Seat is made out of 12mm moulded hot pressed plywood in ergonomic shape fitted with Japanese T nuts and riveted in to the plywood. Upholstery Cushion with pre moulded foam of 50 to 60kg per m3 density in the shape of plywood. Density 52 kg per m3, Hardness 12.6 kgf at 25 percent. Injection moulded polypropylene armrests. Mesh Back on Frame. Back is injected moulded PP. Writing desk Made out of 12mm thick Rubberwood veneers and polished with melamine finish Fabric Seat are duly upholstered with approved fabric. Seat Size W 480 mm x D 530 mm, Back Size 480W x 460H mm, Seat Height 480 mm, Arms Size 230 Ht. Total Height of the chair 899 mm Ht.

Chair with Writing pad and book shelf , Chair with Writing pad and book shelf. Polypropylene Seat and Back Powder coated 4 Legs with castors Width 515 x Depth 500 x Height 800 mm