Bharat Sanchar Nigam Limited Tender

b) Wire management : The double skin partition shall have integrated "CLIP ON" race-way/ways . The arrangement shall ensure the separation of power and networking cables etc. One metal raceway tile to mount switches below the table top level for power and and another skirting tile for data. c) one mobile drawer : Minimum 400mm (W)xMinimum 450mm(D) x Minimum 600mm (H) consisting of 2 No's sliding Drawers and 1 No. File Drawer made of 18 mm thick prelaminated particle board (Drawers bottom panel with 6mm thick prelaminated particle board) and provided with suitable lock for top drawer with castors& Finger groove handles as per manuctureres specifications . d) Metal/ABS key board tray with mouse pad and MS powder coated CPU trolley: shall be as per manufacturers specifications.Average Rate shall be quoted for one workstation keeping in view the approved layout of the workstation arrangement. The rate shall be quoted for the work stations having broad specifications as listed above and as per the manufacturer's specifications conforming to Featherlite make/ Godrej make / BP ERGO/Steel case /HGNI or any reputed make. i) Work station of size 1200mm length X 600 mm depthX 1200 mm height for the arrangment having 6 nos linear sharing work stations in a row with back to back arrangement(3+3) with 60 mm thick intermediate side vertical partitions/supports ( Each work station of 1.20m size is measured for payment )

ii) Work station of size 1200mm length X 600 mm depthX 1200 mm height for the arrangment having 3 nos linear nonsharing work stations in a row with 60 mm thick intermediate side vertical partitions/supports ( Each work station of 1.20m size is measured for payment )

Providing and placing in positi on Mid Back Chairs with the following broad specifications. 1)SEATASSEMBLY: The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The stitched cover should be made from spacer fabric and leatherette. Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. Seat size 47.0cm.(W)x48.0cm. (D) 2)BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. BACK SIZE : 45 cm. (W) x 60.5 cm. (D) 3)ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk MS E.R.W tube. The armrest height adjustable up to 6.5±0.5cm in 5 steps.The Armrest structure should be powder coated (DFT 40-60 micron). 4)ACTIVE BIO-SYNCHRO mechanism : The adjustable tilting mechanism should be with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The mechanism housing should be made up of HPDC Aluminium black powder coated "

.5)SEAT DEPTH ADJUSTMENT Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.4)ACTIVE BIO-SYNCHRO mechanism (FU3401/3402): The adjustable tilting mechanism should be with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. 5)SEAT DEPTH ADJUSTMENT Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. 6) ADJUSTABLE BACK SUPPORT Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 7)PNEUMATIC HT. ADJUSTMENTThe pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. 8)PNEUMATIC HT. ADJUSTMEVT (FU3401/3402): The pedestal is injection moulded in black 33% glass-filled Nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.1±0.5cm. pitch-center dia.(76.1±1.0 cm. With castors.) 9) TWIN WHEEL CASTOR : 5 Nos. twin wheel castors should be injection moulded in plastic having 6.0±0.1cm wheel Diameter and assembled to pedestal of model Versa canvas of Godrej make /equivalent of HNI / STEEL CASE or any approved equivalent reputed make as approved by the Engineer-in-charge.

Providing and fixing Handcrafted Brass Flower Pot/ Brass Planter/Plant Container for Indoor or Outdoor Plant with Lacquer Finish/Polish (Size: 12 inches x 12 inches x 7.5 inches & Net. Wt. 1.75 - 1.85 k.gms) of brand P-TAL or approved equivalent as approved by the Engineer-in-charge