Bharat Sanchar Nigam Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 10,500Document Cost
₹ 590Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BSNL_195922_1Bid Award Id
ViewTender No
NIT No. 19/CECTSCZ/HYD/2024-25Tender Authority
Bharat Sanchar Nigam Limited ViewPurchaser Address
-Website
http://https://www.bsnl.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
a) Of area 3 sq. metres and below
1
-
-
3) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
a) For thickness of tiles 10 mm to 25 mm
1
-
-
4) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1
-
-
5) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
2
-
-
6) Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge:
-
-
-
a) All kinds of soil
1
-
-
7) Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
a) All kinds of soil
-
-
-
i) Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
1
-
-
8) Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
0.5
-
-
9) Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
200
-
-
10) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
1
-
-
b) 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
1
-
-
11) Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
a) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1
-
-
b) Lintels, beams, plinth beams, girders, bressumers and cantilevers
1
-
-
c) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
1
-
-
d) Weather shade, Chajjas, corbels etc., including edges
1
-
-
12) Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
0.5
-
-
13) Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
50
-
-
14) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
0.5
-
-
15) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
a) Cement mortar 1:4 (1 cement :4 coarse sand)
0.5
-
-
16) Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
-
-
-
a) 25 mm dia (heavy type)
2
-
-
17) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
3
-
-
18) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
a) 300x16 mm
2
-
-
b) 250x16 mm
2
-
-
19) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
2
-
-
a) 250x10 mm
2
-
-
b) 200x10 mm
2
-
-
20) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
a) 125 mm
2
-
-
b) 100 mm
2
-
-
21) Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
a) Twin rubber stopper
5
-
-
22) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash
-
-
-
fasteners of required dia and length complete as per direction of Engineer-In- Charge.
-
-
-
(M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
a) Frame size 50 x 100 mm
5
-
-
23) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.
-
-
-
(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
-
-
-
a) 30 mm thick
4
-
-
24) Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
-
-
-
(i)Single socketed pipes.
-
-
-
a) 75 mm diameter
5
-
-
b) 110 mm diameter
5
-
-
25) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
a) 75mm
1
-
-
b) 110mm
1
-
-
Single tee with door
-
-
-
a) 75x75x75 mm
1
-
-
b) 110x110x110 mm
1
-
-
Bend 87.5°
-
-
-
a) 75 mm bend
1
-
-
b) 110 mm bend
1
-
-
Shoe (Plain)
-
-
-
a) 110 mm Shoe
1
-
-
26) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
-
-
-
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
-
-
-
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
-
-
-
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
-
-
-
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
1
-
-
27) 15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
a) 1:6 (1 cement: 6 fine sand)
1
-
-
28) 6 mm cement plaster of mix :
-
-
-
a) 1:3 (1 cement: 3 fine sand)
1
-
-
29) Neat cement punning
1
-
-
30) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
-
-
-
a) Two or more coats on new work.
200
-
-
31) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
a) Water thinnable cement primer.
50
-
-
32) Finishing walls with water proofing cement paint of required shade :
-
-
-
a) New work (Two or more coats applied @ 3.84 kg/10 sqm).
50
-
-
33) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
a) Two or more coats on new work.
25
-
-
34) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
50
-
-
35) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
a) One or more coats on old work.
50
-
-
36) Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturer's specification.
-
-
-
a) One or more coats on old work.
25
-
-
37) Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
a) Old work (One or more coat applied @ 0.90 ltr/10 sqm).
100
-
-
38) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.
-
-
-
a) With cement mortar 1:4 (1 cement : 4 fine sand).
5
-
-
39) Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.
10
-
-
40) Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
2
-
-
41) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
3
-
-
42) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
2
-
-
43) Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
a) 100 mm inlet and 75 mm outlet
-
-
-
i) Sand Cast Iron S&S as per IS- 1729.
2
-
-
44) Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
a) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
1
-
-
45) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
-
-
-
a) 20 mm nominal outer dia. Pipes.
20
-
-
b) 25 mm nominal outer dia .Pipes.
15
-
-
c) 32 mm nominal outer dia. Pipes.
5
-
-
d) 40 mm nominal outer dia. Pipes.
1
-
-
46) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work
-
-
-
a) 20 mm nominal outer dia. Pipes.
2
-
-
b) 25 mm nominal outer dia. Pipes.
2
-
-
c) 32 mm nominal outer dia. Pipes.
1
-
-
d) 40 mm nominal outer dia. Pipes.
1
-
-
47) Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
a) 100 mm diameter
2
-
-
b) 150 mm diameter
2
-
-
48) Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
-
-
-
a) 100 mm diameter S.W. pipe
2
-
-
b) 150 mm diameter S.W. pipe
2
-
-
49) Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
a) 100x100 mm size P type
-
-
-
i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
50) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
a) W.C. pan with ISI marked white solid plastic seat and lid
2
-
-
51) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.
25
-
-
52) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete.
5
-
-
53) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
a) 40 mm thick with 20 mm nominal size stone aggregate
1
-
-
54) Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter.
-
-
-
The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.
-
-
-
Note :- (1) The elevational area of the scaffolding shall be measured for payment purpose.
-
-
-
(2) The payment will be made once only for execution of all items for such works.
200
-
-
55) Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
2
-
-
56) Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
a) 100x63x3.2 mm
2
-
-
b) 75x63x3.2 mm
2
-
-
57) Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
a) 25 to 40 mm nominal bore
2
-
-
58) Removal of vegetation at walls/ roofs and floors/ drainage systems/ water supplying stream of the building/ over head tanks or at any location and applying any special chemical to defective area to prevent vegetation growth and finishing the same with cement concrete/ mortar to match the surface of walls/ floors/ roofs., etc complete as per the directions of Engineer-in-charge. (cement concrete/mortar to be paid in separate item.) (Uprooting of vegetation in each location will be measured as one job)
10
-
-
59) Cutting /Pruning branches of trees for avoiding entering houses and obstructing colony lighting and electrical wire free passing and disposing the cutting pieces away from the compound to the dumping ground as directed by the engineer-incharge. (Pruning/cutting of each branches for each tree will be measured as one job)
1
-
-
60) Removing and refixing G.I.Pipes of all diameters after attending necessary repairs and removal of blockages/ chockages/ scales by rodding/ hammering etc complete at all heights as directed by Engineer-in-charge.
10
-
-
61) Rebate for taking away the unserviceable sanitary / water supply fittings including removing from the existing position . etc., complete.
-
-
-
a) GI pipes 15mm/20mm/ 25mm/ 32mm /40mm
10
-
-
62) Cleaning of Under ground water storage tank or sump or over head tank of any capacity by following method: (1) Empty the tank/sump and make it to near dry, (2) Apply bleaching powder uniformly ( tank capacity @ 0.50gms/liter) surface of inside the tank/ sump perfectly by removing scales on walls and wait for one hour (3) after one hour clean/ rinse at the tank/ sump with fresh water ,repeat the above process , (2) and (3) for two to three times , (4) remove the mud/ silt/ sludge and garbage from the tank with specified sludge pump, (5) spraying anti bacterial agents on walls to kill harmfull bacteria. Rate includes for all above operations including the equipment and material required for cleaning all complete as directed by the Engineer- in- charge.
-
-
-
Liquid capacity of water tanks of any capacity in litres is measured for payment
10000
-
-
63) Cleaning of exisitng sewer lines, manholes etc. Cost includes all labour for removing the silt, slush, waste etc. and rodding the sewer lines and manholes by mobile sewer rodding equipment/manually from manhole to manhole to clear the blockage, chokages etc for proper functioning of sewer lines( The payment shall be made for removal of blockages in between manhole to manhole as one job with all above operations.)
20
-
-
64) Providing and fixing Pre-cast gully trap cover of INDO/KITTO make or equivalent of 25mm thickness of size 300 x 300 mm or of required size as per requirement for existing gully trap with necessary repairs etc all complete as per the directions of Engineer-In-Charge
1
-
-
65) Supplying and fixing in position precast RCC Man hole frame with cover, frame square of size 650 x 650 x 75 mm of approved make. The cover should be 40mm thick and provided with required quantity of reinforcement. The frame shall be fixed in cement mortar over the manhole opening and rounding of edges etc., shall be made complete all as per the directions of Engineer-in-charge.
1
-
-
66) Cleaning of nahni traps/floor traps including removing the silt outside the compound all complete as per the directions of Engineer-In-Charge.
1
-
-
67) Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete.
-
-
-
a) 20 mm nominal bore
2
-
-
b) 25 mm nominal bore
2
-
-
c) 40 mm nominal bore
2
-
-
68) Providing and fixing CPVC union in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete.
-
-
-
a) 20 mm nominal bore
2
-
-
b) 25 mm nominal bore
2
-
-
c) 40 mm nominal bore
2
-
-
69) Replacing existing damaged sanitary pipes by providing UPVC SWR soil waste and vent pipes by cutting, removing, replacing with working pressure 6kgf/sq.cm conforming to IS : 13592 Type B including jointing with 'T' shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i)Single socketed pipe(couplings,other accesories will be paid seperately)
-
-
-
a) 110mm diameter
5
-
-
b) 75mm diameter
5
-
-
70) Replacing existing on wall face damaged unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting,replacing,jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.
-
-
-
a) Coupler
-
-
-
i) 110mm
1
-
-
ii) 75mm
1
-
-
b) Plain bend of required degree
-
-
-
i) 110mm bend
1
-
-
ii) 75mm bend
1
-
-
c) Tee with door
-
-
-
i) 110X110X110
1
-
-
II)75X75X75
1
-
-
d) Door bend
-
-
-
i) 110mm
1
-
-
ii) 75mm
1
-
-
e) Single Y with door of required degree
-
-
-
i) 110X110X110
1
-
-
ii) 75X75X75
1
-
-
71) Providing and fixing unplasticised -PVC pipe clips of approved design for fixing of unplasticised - PVC pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting chases in brick work, fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall with rich cement plaster etc. complete.
-
-
-
a) 110mm
5
-
-
b) 75mm
5
-
-
72) Providing and fixing C.P Brass waste with all accessories etc complete as directed by the Engineer-in-Charge
-
-
-
a) 32mm diameter
2
-
-
73) Providing pointing of tile joints with polisulphide/white cement up to 2mm depth by removing existing damaged/loosened white cement from joints to arrest leakage as directed by engineer in charge(Area of tiled flooring/ dadoo where above operations are made is measured for payment)
1
-
-
74) Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with T.W. beading 15x1mm and nails & screws complete.
-
-
-
a) Stainless steel (grade 304) wire gauze of 0.3 mm dia wire and 1.8mm aperture on both sides.
0.5
-
-
75) Cleaning, washing mopping of floors of including cleaning of Dado, washroom and flooring in Toilets by scrubbing with wire brush, cleaning with detergent, liquids and water etc., including its disposal of rubbish, garbage outside the compound complete etc as directed by the Engineer-in-charge.
1
-
-
76) Charges for demolising the existing WC pan with trap from position including surrounding lime concrete comple to minium required size to fix new WC pan with trap including jointing with the existing waste, refilling the surroundings with lime concrete and finishining the floor with cement concrete flooring using required quantity of Fosroc or equivalant liqued all complete as per the direction of Engineer-in Charge.(The rate includes the disposal of all the debries to the dumpimg ground)
1
-
-
77) Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm :
-
-
-
a) For windows in ground floor and /or for windows which can be accessed from inside of the room / bolcony with a ladder.
2
-
-
b) For windows in upper floors (other than ground floor) up to 8 floors, fixing of glass panes with Jhoola arrangement.
2
-
-
78) Charges for making the steel window shutters freely moving by oiling the hinges , cleaning of rust on all sides etc at all levels ., complete as per the direction of Engineer-in-charge.
5
-
-
79) Cleaning of canopy/ chajjas by removing leaves grass dust, rubbish and other deposited / accumulated materials etc including removal of blockages/chockages of khurras/spouts of terrace/chajjas etc by disposal of rubbish to the dumping ground out side periphery of the building. (plan area of thechajja/canopy will be measured for payment)
-
-
-
a) Blocked chajas, inaccessible canopy & like upto First floor level .
50
-
-
b) Blocked chajas, inaccessible canopy & like Above first floor level .
50
-
-
80) Providing clog cleaning of entair drainage system in the compound consisting of manholes, sewer lines, gully traps etc., including removing the sludge, silt, slash, waste etc., from the manholes and disposing the waste out side the compound etc., complete as per the direction of the Engineer-in-charge. (rate for cleaning of entair drainage system will be measured as one job)
1
-
-
81) Removing the damaged sanitary and water supply fittings and replacing them with new fittings including necessary white lead/ lead wool etc complete as directed by the engineer in charge.
-
-
-
a) P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
2
-
-
b) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe
-
-
-
i) 32 mm dia
5
-
-
c) PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
-
-
-
i) 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.
4
-
-
d) Uplasticised PVC connection pipe 15 mm nominal bore and 45 cm length with brass unions :
5
-
-
e) C.P. brass shower rose 100 mm diameter with 15 or 20 mm inlet :
1
-
-
f) PTMT stop cock 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour.
5
-
-
g) PTMT pillar cock 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. of approved quality and colour .
5
-
-
h) PTMT grating 100 mm nominal dia. Circular type. of approved quality and colour.
10
-
-
i)Providing and fixing PTMT health faucet with PVC pipe including holder complete etc., as directed by the Engineer-in-charge.
2
-
-
j) C.P. brass two in one bib cock 15 mm nominal bore. of approved quality conforming to IS:8931:
2
-
-
k) solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
1
-
-
l) PTMT Bib cock 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour.
5
-
-
m) C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931:
2
-
-
n) C.P. brass stop cock 15 mm nominal bore. of standard design and of approved make conforming to IS:8931.
2
-
-
o) C.P. brass pillar cock 15 mm nominal bore. of standard design and of approved make conforming to IS:8931.
2
-
-
82) Charges for arranging carpenter / plumber along with helper whereever required for attending minor repair works in the compound etc., complete as directed by the Engineer-in-charge. (The required fittings & fixtures exept screws/nails, drilling etc.shall be paid separately and measured for each half day)
5
-
-
83) Welding by gas or electric plant including transportation of plant at site etc. complete.
20
-
-
84) Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.
-
-
-
a) Upto and including 12mm dia.
10
-
-
85) Supplying and application of ready to use anticorrosive coating Nitozinc Primer of M/s Fosroc chemicals (India) Pvt. Ltd., or equivalent in two coats coats @ 28ml per R.M. (Proportion of 600ml Nitozinc base + 400 ml Nitozinc primer hardener = 1 ltr)over the reinforcement bars, stirrups, lateral ties of slabs, beams & columns complete as per the manufacturer's specification and as per the instructions of Engineer in charge, the rate is inclusive of the cost of all materials, hire charges of tools, labour charges etc.
-
-
-
a) upto 12mm dia
20
-
-
b) more than 12mm dia, upto 25mm dia
20
-
-
86) Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
a) Bars upto 12 mm diameter
10
-
-
b) Bars above 12 mm diameter
10
-
-
87) Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
a) 50 mm average thickness
2
-
-
88) Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections
10
-
-
89) Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
5
-
-
90) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
0.5
-
-
91) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
a) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)
0.5
-
-
92) Rebate for taking away of steel reinforcement obtained from dismantling of RCC Chajjas.
20
-
-
93) Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge.
5
-
-
94) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1
-
-
95) Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
4
-
-
96) Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:
-
-
-
a) Two or more coats on new work.
100
-
-
97) Providing and fixing 100 mm vertical venetian blinds of approved shade, colour, dust guard treated fabric along with all hardware etc., as per manufacturer's specifications etc., of VISTA LEVELOR make or equivalent all complete as per the direction of the Engineer-in -charge (outer to outer area will be measured for payment. Deduction will be made for opeinings of area exceeding 0.20Sqm)
10
-
-
98) Fixing anodized aluminum partitions and doors with available materials after making required sections as per the drawing for powder coated aluminum sections , particle board, glass panels, neoprene gasket and snap on beading) including fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/Neoprene felt etc, aluminum sections shall be smooth, rust free, straight , mitered and jointed mechanically wherever required all complete as per the architectural drawings and the directions of the Engineer-in-charge.
10
-
-
99) Dismantling anodized aluminium partitons, doors and other frames including proper numbering, laoding and unloading and placing at the required place in the building as directed by the Engineer-in-charge .( The rate includes the rectifying the damages made in the floors/masonry and concrete surfaces as directed by the Engineer-in-charge)
50
-
-
100) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements