All India Institute Of Medical Sciences Tender

PCB Replacement (Non inverter) only single side indoor or out door compitable to existing unit.

PCB Replacement (Non inverter) only Both side indoor and out door

PCB Replacement (inverter) only single side indoor or out door compitable to existing unit

PCB Replacement (inverter) Both side indoor and out door

PCB Repair (Non inverter/Inverter)

Sensor Replacement

Stabilizers for 1/1.5 ton

Stabilizers for 2 ton

Blower Motors Replacement

Swing motors replacement for 1.5/2 Ton Split

Blower

Air filters

Remote control Units Original

Louver set

Split AC Out door Unit

Out door Fan Motor Replacement

Out door Fan Replacement

Fan Capacitor Replacement

Compressor Replacement

Compressor Capacitor

Condenser Coils replacement and gas fiiling in condenser coil

Gas Filling including Refrigerant

For All type of Split and cassette Air conditioners

Relocation (including indoors and out door unit)

Supply and laying with foarm insulation of 12mm Copper pipe including tubular foam Insulation

Supply and laying with foarm insulation of Supply 15mm Copper pipe including tubular foam Insulation

Laying cost of copper pipe up to 15 mm (if material Provided by AIIMS)

Outdoor stand set

Core cutting (including Wall/Concrete)

Foam Insulation

For Cassette Air conditioner

General servicing 2/3 ton Cassette AC: General servicing of 2/3ton cassette Air conditioners includes as follows i) Inspection of the AC – IDU and ODU for any abnormality in operation, sound etc ii) Testing the Performance of AC for desired cooling. iii) Remove dust and clean the inside and outside units. iv) Testing of Gas pressure if necessary and check for any leakages near the check nut etc or diagnose any other fault. v) Remove the filter, water service and fix it back after drying. If any damage Replace with new filters (Filter amount Paid sepparetly) vi) Clean the drain tray and drain pipe and remove any choke for free flow of drain water. vii) Clean the Evaporator with brush and remove the dirt/dust. Check for any fungus formation or bad smell and wash it with chemical, if required. viii) Water washing of Condenser Coil. ix) Topping of Refrigerant gas, if required (Refrigerent amount to be paid for separately) x) Clean the condenser coil with blower. xi) Clean the external grill/casing with soap water jet wash. xii) Check for any loose connections. xiii) Lubricate the motors, whenever necessary and carry out maintenance of compressor/fan motor. xiv) Wet cleaning/de-scaling must be carried. xv) Carry out Repairs/Maintenance of any other items/parts of the unit including unit bracket and casing. (Major Spare parts repaire or to be paid for separately) xvi) Seal a small opening around the pipings with gum type sealer.

For Cassette Air conditioner Indoor Unit

Blower indoor

Blower Motors Replacement

Drain Water pump

PCB replacement including sensors one side indoor or out door unit for Cassete AC 2/3Ton

PCB replacement including sensors Two sides indoor and out door unit for Cassete AC 2/3 Ton

PCB Repair indoor and out door unit for Cassette AC 3/4 Ton

Main supply terminals

Capacitor replacement

Running Capacitors

Nitrogen Leakage Testing and Rectification

Contactors heavy 3 phase

For Cassette Air conditioner Out door Unit

Out door Fan Motor Replacement

Out door Fan Replacement

Fan Capacitor Replacement

Compressor Replacement

Compressor Capacitor

Gas Filling including Refrigerant in 2Ton

Gas Filling including Refrigerant in 3Ton

Filters

Remote control Units Original

Condenser Coils replacement and gas fiiling in condenser coil

Cabling from IDU to ODU

Minor Parts of indoor / Outdoor unit enclosures fastners

Drain piping from IDU to drain point