Water Resources Department Tender

Providing and placing in position of plain cement concrete M 10 grade using M. Sand graded hard blue granite broken stone jelly of 40 mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers.

Providing and placing in position of plain cement concrete M 20 using M. sand hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and laying of ready mix for M 25 grade of concrete having charaterstic strength not less than specified in the IS 456 - 2000 using Ordinary portland cement with minimum cement content of 300 Kg / cum confirming to IS 8112. Coarse aggregates having a specific gravity of 2.60 using 20 mm down graded hard blue granite broken stone jelly and fine aggregate without flyash as per IS 383 - 1970 ( 2007 ) with suitable water cement ratio not less than 0.45 and not exceeding 0.50 of water quality confirming to IS 456 - 2000 including use of plasticizer of approved make & dosage of required grade at all locations and levels with specified high workability as per IS 1199 - 1959 ( 2004 ). The initial & final setting time confirming IS 12269 - 1987 ( 2004 ) with maximum temperature of concrete at the time of placing should not exceed 32 0 C. The admixtures affecting the quality and strength of the concrete should not be used and should confirm IS 9103 - 1979 [ usual admixture - Air entraining & water reducing ]. ges as per IS 456 - 2000, 4031 - ( Part 3 & 6 ) / 1988 ( 2005 ) & ( Part 2 ) / 1999 ( 2004 ) and 516 / 1959 ( 2004 ), 4926 - 1976 ( 1990 ), mix design details to be got approved before commencement of the work adopting pour card system and other OK cards. Excluding the cost of form works, centering and shuttering placed in position etc, complete complying with standard specifications and as directed by the departmental officers. (RCC work)

Supplying and erecting centering for vertical plain / RCC concrete walls of supply channel, retaining wall etc for following height height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers

Upto 0.90 M Height

ocm to 180cm height

Upto 2.70/3.00 M Height

3.00 to 4.00 M Height

4.00 to 5.00 M Height

5.00 to 6.00 M Height

6.00 to 7.00 M Height

Supplying, fabricating and placing in position of Mild Steel or Ribbed Tor Steel for all RCC works as per design & drawing given including cost of steel, binding wire and labour charges for cutting, bending, laying in position and tying with binding wire, etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing 300mm wide PVC EXPANSION JOINT in the 20mm expansion gap provided in between decks over piers and in between deck and dirt wall over abutment as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealant etc., complete

Supplying and fixing of PVC pipe 110 mm dia (6Kg/cm2) for weep holes provide in the wing walls of either side etc.,complete as directed by the departmental officer.

De-watering of using diesel pump set having capacity 7.50HP including cost of hire charges, diesel, labour etc complete complying with standard specifications and as directed by the departmental oficers

Sand and Silt Under Water (SS20B) Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Slush and silt under water upto 0.75m depth requiring the aid of basket and vessels (SS20B) including conveyaning the excavated earth to the low lying area with lead of 10Km including levelling as directed by the feld engineers etc., complete complying with standard specification and as directed by the departmental officers

Earthwork in all Soils except Hard Rock requiring blasting and conveying for formation of bund with a lead of 10 KM deploying earth moving machineries and tipper including benching formation of bunds breaking clods sectioning with extra watering and consolidation by power roller and including hire charge etc., complete complying with standard specification and as directed by the departmental officers. (10 KMMR).

Fabricating, supplying and erection of Screw Gearing Steel Shutters of Size widh 2.10m and up to 2.00 m height consist of Skin plate made out of 8 mm thick Mild Steel plate and horizontally stiffened with 150 x7 5 mm RSJ at an interval not more than 0.50 m and vertical stiffeners made out of 100 x 50 mm MS channel at an interval not more than 0.60m and provided with 10 mm thick Mild Steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red oxide primer. The rate including cost of materials, consumables, labours, power charges, conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty 5years including all taxes etc., complete.

Fabricating, Supplying and fixing of Top Beam made up of 200 x100mm (ISMB 200) duly drilled to suit the Head set Assembly with required bed bolt made out of 25 mm Mild Steel Round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary Fish plate made out of 16mm Mild Steel Plate of size 0.20 x 0.30m 2 nos. with required holes. Conveying and leading the top beam arrangements to the worksite. Fixing the top beam arrangements at the top of the vent to correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil works conveyance charges for labours and materials and warranty 5years including all other taxes etc., complete.

Fabricating, supplying and fixing of 63 mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and and warranty 5years including all other taxes etc., complete.

Fabricating supplying and fixing of shutter Groove Angle made up of 100 x 100 x 10mm Mild Steel angle for required height including welding hold fast of size 40 x 40 x 6mm Mild steel angle 3Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The Groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty 5years including all other taxes etc., complete.

Fabricating, Supplying and fixing of Head Set Assembly medium duty with hexagonal nut(approximate 70 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for all machining equipments, conveyance charges for labours and materials and warranty 5years including all other taxes etc., complete.

GST 18% IN FIGURES