Water Resources Department Tender

Earth Work Excavation for foundation in all soils and sub soils and to full depth as may be directed by the Departmental Officers except hard rock requiring blasting including shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated soil in layers not exceeding 15 cm thick, well rammed and consolidated and depositing including all initial leads and initial lifts, etc., complete complying with standard specifications and as directed by the departmental officers. (Narrow excavation)

Supplying and erecting centring for vertical plain / RCC concrete walls of supply channel, retaining wall etc upto Specified height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers

Upto 0.90m Height

Upto1.80m height

Upto 2.70m / 3.00 m Height

3.00 to 4.00 M Height

4.00 to 5.00 M Height

5.00 to 6.00 M Height

6.00 to 7.00 M Height

7.00 to 8.00 M Height

8.00 to 9.00 M Height

Providing and placing in position of plain cement concrete M 10 grade using graded hard blue granite broken stone 40 mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing Bitumen felt Pad of 20mm thickness conforming to IS for joints including cost of all materials and labours atc complete complying with standard specifications and directed by the departmental officers

Supplying and fixing of PVC pipe 110 mm dia (4Kg/cm2) for weep holes provide in the wing walls of either side etc.,complete as directed by the departmental officer.

Providing and placing Plain Cement Concrete M15 grade using crusher broken hard granite course aggregate (well graded) of nominal maximum size 60% of 40mm and 40% of 20mm and down graded to I.S specified grading (To achive the specified characteristic strengh of 15N/mm2 in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by baling / pumping and diverting wherever necessary placing in layers and vibrating, water curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strengh specified in the approved drawing and specifications, as per the direction of the engineer in charge of works and complying with technical specifications.

Below Ground level upto 1.5 m depth

Below Ground level 1.5 m to 4.5 m depth

Above Ground Level upto 4.5 m height

Above Ground Level above 4.5 m height

Providing and placing in position of plain cement concrete M 20 using hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Below Ground level upto 1.5 m depth

Above Ground Level above 4.5 m height

Providing and placing in position of Reinforced Cement Concrete M 20 using hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick excluding form works, centring, shuttering and steel fabrications compacting, consolidation by using vibrators, finishing, watering, curing, etc complete complying with standard specifications and as directed by the departmental officers

Above Ground Level above 4.5 m height

Supplying, fabricating and placing in position of HSD (high Yield Strength) bars for all reinforced cement concrete works including cost of binding wire, steel rods, conveyance charges and labour charges etc., complete, complying with standard specifications and as directed by the Departmental Officers of work.. (Specification No.9.1 to 9.12.1)

Supplying and filling with river sand of each layer not more than 15 cm thick including consolidation etc complete as directed by the Engineer in charge of works and as per the technical specifications etc complete as per specification clause 4.1.2 to 4.1.4)

Gravel backing for revetment in layers not exceeding 15 Cm thick including stacking for premeasurement, watering, consolidation and trimming the top surface so as to receive the rough stones, etc complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing in position of demarcation R.C.C. pre cast post in Cement concrete of grade M 15 with well graded aggregates and the nominal maximum size of coarse aggregate of size 20 mm of size 0.20 x 0.20 x 1.45 M and 0.45 x 0.20 x 0.30 m base fixing the post 30 Cm depth below ground level, the post includes using 4 numbers of 12 mm RTS main rod to a length of 1.45 M, using 6 mm MS @ 23 cm spacing as strips with steel centering and painting the post with enamel paint allround the post etc. complete and conveying the post to the site of demarcation boundary such as canal bund/water spread area etc including earth work excavation for foundation in HSC having the base plain cement concrete of 15 cm of grade M 7.5 with well graded aggregates and the nominal maximum size of coarse aggregate of 40 mm, and the post embedded by using Cement concrete of grade M15 with well graded aggregates and the nominal maximum size of coarse aggregate of 20 mm as per the drawing enclosed including cost of earth work, concrete, moulding charges, steel reinforcement, finishing, watering, curing, painting them and marking at top of post, etc .complete

Launching Apron of loose boulders of each size greater than 300mm and weigh more than 40kg etc complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing the Cement concrete block of size 300 mm X 250 mm X 200 mm of M 15 using hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost and conveyance of all materials to work site, labour charges for fixing the same in position and including all other incidental charges, compacting, consolidation by using vibrators, finishing, watering, curing etc complete complying with standard specifications and as directed by the departmental officers

Fabricating, Supplying and erection of Screw gearing steel shutters of size 1.70m x 0.90 consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.

Fabricating, supplying and fixing of Shutter Groove Angle made up of 65x65x6mm Mild Steel angle for required height including welding hold fast of size 25x25x6mm Mild steel angle 2 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty for 5 years etc., complete, etc.,

Fabricating, supplying and fixing of 63mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod,conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete

Fabricating, Supplying and fixing of Top Beam made up of 150x75mm (ISMB 150) duly drilled to suit the Head Set Assembly with required bed bolt made out of 25mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary Fish plate made out of 12mm mild steel plate of size 0.30 x 0.15m 2Nos with required holes. Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent in correct position including dismantling the existing eroded top beam, conveying and stacking and the section stores. The top beam should be painted with two coats of AC black paint over one coat of Red Oxide primer. The Rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil works conveyance charges for labours and materials and warranty for 5 years etc.., complete.

Supplying and fixing of Head Set Assembly medium duty with hexagonal nut (Approximate 70 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required rust fre bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at sectio store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours charges for wooden pattern, moulding and charges for labours and materials and warranty for 5 years etc., complete.

GST 18% IN FIGURES