V O Chidambaranar Port Trust Tender

Supply and clarnping of 3 1/2 x50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps with Earth connection

Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimbing etc with electrical connection complete

Supply of fixing of High bay fittings and accessories suitable for 150W LED lamp including terminal box and suitable connector in were house

Supply and Fixing of Metal Glad socket and accessories suitable for 32Amps metal Glad socket

Supply and fixing of top lantern fitting(integral type ) and accessories suitable for 120W LED lamp including terminal box and suitableSP MCB and contactor

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure Distribution board with Double door(Metal) 1No 40 Amps DP MCB as incoming and 6 Nos. 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make).for DP inside

supply and fixing of 5A - 60A AC Three phase 500V ,50 HZ Watt hour meter covered with suitable metal or plastic box containing glass door for meter reading and 63A 4P MCB enclosed in 4 way DP .The Accurancy class of the Energy meter should be 0.5 conforming to ISI marked to IS 13779/99 with latest amendments on suitable box complete with earth connections .The meter shall be provideed with the test reports from central government /NABL approved / ILAC acredited lab to prave conformity to the specification.(preferred make ;L & T, HPL ,Schneider or other equivalent brand)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and laying of 3 1/2 x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre puting 0.15 mwter layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 3 1/2 x150 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimbing etc with electrical connection complete

supply and fixing of 16 way (4pole) and neutral sheet enclosure Distribution board with Doubledoor (metal) 2Nos.4P 63A, 3Nos 2P 32Amps DPMCB outgoing with busbar in flush with wall and making good of the concealed portion with earth connection only Also termination.The MCB DB and MCB's should be with ISI mark.

Supply ,installation ,Testing and commissioning of Thermoplastic Polycarbonate distribution panel with back& bottom frame arrangement including switchgears,Bus bar Chambers with copper bus bar ,Meters ,Indicators lamp, interconnection wiring with suitable wire/cables/bus bar arrengement &links, Rotary handle arrengement for MCCB ,Cable chambers required outgoing wire/cable interconnection with channel box arrangemment s, Required metering sets ,indication lamp sets,Termination of existing cable, Civil works for erection (base concrete and back side bolt arrangement .if any as per site condition and as per the specification enclosed (complete set)with the following arrangement-complete set . Incoming : 250A FP 36KA, MCCB -2Nos .MFM with CT and RYB indication set-1No 2)Outgoing : a) 125A, 25KA FP MCCB - 7Nos. b)63A 4P ,10KA, MCB -2Nos. c)RYB indicator lamp arrangement in all outgoing. d)Required terminal blocks.

Supply and fixing of 200 Amps TPN sheet steel double break switch with HRC fuses and neutral on suitable angle iron frame work with MS cable entry boxes PWD Earthing.