V O Chidambaranar Port Trust Tender

Providing and laying Reinforced Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., and excluding the cost of form work and reinforcement grills for all RCC works in all floors upto full height of the building etc., complete complying with AISS and as directed by the departmental officers.

Providing Form work including centring, shuttering, (shuttering Planks shall not less than 38 mm thick) so as to give a rough finish shuttering and propping etc., in all floors upto full height of the building and removal of the same for in situ RCC work such as beam, slabs, lintels, sunshade etc., complete complying with AISS and as directed by the departmental officers.

Fabricating and placing in position of M.S / Tor steel grills for R.C.C works in all floors including cost of Steel, cutting, bending, binding with 16 Gauge GI Binding wire and placing in position etc., complete complying with AISS and as directed by the departmental officers

Filling in basement with M. Sand (Crushed Stone Sand) to the required thickness in layers including watering, ramming, consolidating and dressing etc., complete complying with AISS and as directed by the departmental officers.

Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) (One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in all floors up to floor two level of the building including cost of all materials, labour, curing etc.,complete complying with AISS and as directed by the departmental officers.

Providing Half Brick Masonry wall using chamber burnt bricks in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) (One cement, three M. Sand (Crushed Stone Sand)) for Partition walls etc., in all floors including cost of all materials, labour, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.

Applying One coat of Alkali Resistant Primer and Two coats of ACE - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings andother foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers

Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Providing and laying approved colour and quality of Vitrified floor tiles 60 x 60 cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 20 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles aremulti chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with overall the edges of frame and shutter. The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers.

Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23 cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers.

Cleaning the Juliflora jungle, debris and bushes including up rooting juliflora trees, rank vegetation, grass, wood saplings ans trees not exceeding 30m girth etc., and removing not exceeding 50m outside the periphery of the area cleared and filling and levelling the pits formed where the trees are up rooted etc., including all labour, tools, etc., complete and as directed by the departmental officers.

Dismantling and removal of Brick Masonry work (BW) in Cement Mortar above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.

Providing R.C.C. Work smooth finishing of the exposed surfaces in all floors with Cement Mortar 1:3 (Plastering Sand (P-Sand)) (One Cement, Three Plastering Sand (P-Sand)) 6 mm thick including scaffolding, labour charges, cleaning etc., complete complying with AISS and as directed by the departmental officers.

Supplying, fabricating and fixing in position of GI pipe ladder for a height of 6m using 40mm dia. GI pipe as vertical member & joint horizontal step using 40mm dia. GI pipe and for Hand Rail of required lengt using 20mm dia GI pipe. The rate includingcost of 40mm dia. GI pipe, 20mm dia. GI pipe, transportation charges, fabrication charges, fixing charges, including one coat primer and two coats of synthetic enamel paint, labour, tools, equipments, etc., complete and as directed by the departmental officers.

Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer).

Providing and fixing 50 x 50 mm size PVC Coated chain link fabric fencing made of G.I. wire of dia. 4mm to achieve outer dia. not less than 5 mm in required colour and shade of required width including strengthening with 2 mm dia wire or nuts, bolts and washers as required, all labour, materials, tools & plants etc., complete and as directed by the departmental officers.

Dismantling Barbed wire or Flexible wire rope in fencing including making rolls and stacking them within a lead of 100m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing of G.I. Barbed wire 10 gauge (6Rm. / Kg.) two ply three points confirming to I.S. Code No. 278 -1962 Type - I, straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanised mild steel wire, stapples or steel pins etc., for horizontal and tying with the fencing / M.S angle post using G.I steel wire including all materials, labour, tools etc., complete complying with AISS and as directed by the departmental officers.

Fabricating and fixing in position MS sheet Caution board of size 1.20m x 0.90m with MS angle 35mm x 35mm x 5mm for frame and MS angle 75mm x 75mm x 8mm for legs to a height of 3.0m including cost of angle, 2mm tk. MS Sheet, all materials, one coat of primer (Red oxide) and two coats of Synthetic enamel paint over the red oxide primer and writing letters & figures of height 7.50 cm, including Earthwork excavation, Plain Cement Concrete 1:4:8, labour, conveyance etc., complete and as directed by the departmental officers

Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.