V O Chidambaranar Port Trust Tender

Supply and laying of ISI standard pipe in road crossing by road cutting to a depth of 300mm and laying of GI pipe and finishing with concrete to the road level. Necessary rubber bushes to be provided in the ends of GI pipe for easy movements and prevent rodents. GI pipe should be of medium duty class having a diameter of 4" for road crossing.

Supply and laying of 3.5 x 50 sq.mm PVC armoured LTUG cable with ISI mark and putting 0.15 metre layer of sand and covering the cable completely with box type bricks and sand and refilling the earth to make good including end termination

Brick work in C.M 1:5 mix including all labour 1charges etc complete Design, Manufacture, Supply, Erection, Testing and Commissioning of LT floor mounted outdoor type steel cubicle pillar box including 3mm thick sheet steel separate outer cover with following arrangements and specifications including concrete foundation, M.S.Base channel bed bolts and nuts etc. Specifications: System: 415V, 3 phase 4 wire, 50 Hz AC supply. Installation: Outdoor type. 1) Incomer: 400A 4pole main switch with complete operating mechanism external rotary handle, 3 Nos.400A HRC fuses complete with termination arrangement suitable for the reception of the existing incoming LTUG cable - 2 Nos. 2) Bus Bar: Aluminum Bus bar with required length 4 Runs of 2 X 1½ Aluminum bus bar # 1 No. 3) Outgoing: 250A 4pole main switch with complete operating mechanism external rotary handle, 3 Nos.250A HRC fuses complete with termination arrangement suitable for the reception of the existing incoming LTUG cable # 3 Nos. 4) Outgoing: 125A, 4pole main switch with complete operating mechanism external rotary handle, 3 Nos. 125A HRC fuses complete with termination arrangement suitable for the reception of the existing incoming LTUG cable # 2 Nos. 5) Outgoing: 63A, 10 KA, 4 Pole MCB # 5 Nos. 6) Outgoing: 50 MNX contactor, 4 Pole, 440 V coil # 2 Nos. 7) Outgoing: Analog timer single phase, 6 kW/43A # 8) Trivector meter with Rs485 port required with 400/5 CT coil with 3 nos arrangements with internal wirings with different slot reading program. 9) Providing suitable MS channel arrangement at bottom for installing the above panel. 10) All incoming and outgoing cable termination including suitable glands, lugs etc. 11) On/Off Indicating lamp in incomings & outgoings. 12) Multifunctional meter for outgoing switches (250A & 125A).

Supply and fixing of 8-way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 2 nos. 63A 4P MCB, 6A to 32A SP MCB-3 Nos as outgoing in flush with wall with earth connection only. Higher End with Wall cutting, grouting, flushing, Labor Charges.etc.

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB Incomer ) with double door (metal door) with 1 no. 63A 3P MCB switch as incoming and 4 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End including earth connection & labour charges

Supply and run of 2 of 4 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories and paintings with suitable colour including continuous earth wire connection of 1 sq.mm Green colour flexible copper wire

Supply and run of 2 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.

Wiring with 2 x 1.5 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe concealed in wall and ceiling with PVC accessories with Polycarbonate cover frame with Modular surface box with 6 A Modular switch with painting of suitable colour, for concealed PVC light point / fan point (6 points per coil)with continuous earth wire connection of 1.0 sqmm Green colour flexible copper wire.

Wiring with 2 x 1.5sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe concealed in wall and ceiling with PVC accessories with Polycarbonate cover frame with Modular switch box for 5A 5 pin shutter modular socket with 5A Modular switch with painting of suitable colour, with continuous earth wire connection of 1.0 sqmm Green colour flexible copper for concealed PVC power plug point. (5A 5pin socket with switch) (5A Plug Pts)

Wiring with 2 x 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe concealed in wall and ceiling with PVC accessories with Polycarbonate cover frame with Modular switch box for 16A 5 pin shutter modular socket with 16 A Modular switch with painting of suitable colour, with continuous earth wire connection of 1.0 sqmm Green colour flexible copper for concealed PVC power plug point. (16A Power Plug Pt)

Supply of 100W Hanging LED light in celing with suitable box for termination of cables (i/c,o/g and luminarie cables) with connectors, glands, etc. Operating input voltage range (inVolts)140 to 270V. Luminaire System Effi cacy – Lumen output -(Lumen/watt) ≥ 120...Ingress Protection (IP) Rating of Luminaire (agreed to furnish testcertifi cates to buyer / consignee on demand) IP 66...Shape of Luminaire Round. Agreed to furnish LM 79, LM 80reports from Central Government lab/NABL/ILAC accrediated lab as perIS:16106:2012 latest and asper IS:16105:2012 latest

Supply and fixing of 200W LED flood light with fitting suitable connector for LED connection between driver output & LED mounting pipe & pole and other accessories. ISI marking of 3 core wire with minimum length of 1 mtr shall be provided along the supply of Material. with suitable box for termination of cables (I/g, O/g and luminarie cables) with connectors, glands, etc

Supply of 1ftx1ft, 30watts, ceiling mounting/Surface mounting LED fittings including integral driver unit, PF 0.90, Lumesn output: Minimum 80lm/W, LED Efficiency: 85%, Colour temperature: 6000- 6500K, THD : Upto 10% Driver Efficiency : 90% Minimum lumens output: 2400 lumens, LED Slim square downlight with high efficient LED & low glare free optical diffuser. Make: Halonix, Bajaj, Philiphs, Crompton greaves, compact, schinider, wipro, banbury.

Supply and fixing of 4'feet 20 W LED T5 battern with frosted diffuser fittings with all accessories.

Supply and fixing of 375mm (15") sweep light duty AC exhaust fan complete with necessary wall opening and making of the wall including providing suitable louvers at outside of the building.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC exhaust fan

Supply and fixing of 1200 mm (48") sweep BLDC ceiling fan with 2 meter down rod with necessary ceiling clamp arrangement, five step regulator Make: Crompton/polar/orient

Supply and fixing of 1.5-ton inverter type 5 star rating split air conditioner unit with copper condenser and if required to provide suitable stand for outdoor unit as per the specification mentioned.

Supply and fixing of 20A DP plug and socket in sheet steel closure with 32A MCB in flush with wall earth connection.

Supply of 400mm wall mounting fan along with all accessories supply voltage: 240v AC, 50Hz, remote control: yes,

Supply and fixing of top lantern fitting (integral type) and accessories suitable for 48/50 W LED lamp including terminal box and suitable SP MCB and connecter suitable for fixing of 2” MS Pipe

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply of Digital 300 KHz Multimeter as IS:9000/part-3/section-5/1977 latest with the following-specifications: Bright, large-digit, wide-viewing-angle display • Dual display for displaying two properties of an input signal (e.g., ac voltage in one display and frequency in the other). • Remote operation via IEEE 488, RS-232, and Ethernet interface. • Trigger in and measurement-complete out • Front panel USB port for optional memory (8846A Only) • 6-1/2 digit resolution • Half-rack width • True rms ac • 2 and 4-wire resistance measurements • Extended 10 Ω and 1 GΩ ranges (8846A Only) • Frequency measurements to 300 kHz (8846A to 1 MHz) • Capacitance measurements (8846A Only) • Temperature measurement (8846A Only) • 10 A current capability • Decibels (dB and dBm) with variable reference impedance and audio power measurement capability • Input terminals on both front and rear panels of the meter • Closed-case calibration (no internal calibration adjustments)Calibration certificate is to be submitted. Make: Fluke

Supply of Digital Earth Resistance Meter As Per IS 9000 (Q3 Category) with the following specifications: Earth resistance ranges: 0.01 Ω to 19.99 Ω, 0.1Ωto199.9Ω, 1Ωto 1999Ω Test current: 20Ωrange,10mA AC RMS approx, 200Ω ranges,1mA AC RMS approx, 2000 Ω range,100 μA AC RMS approx. The test current should be constant throughout the range. Accuracy: ±(1.5%of reading +5 digits) valid from 10 %to 95%of the range. Resolution: 0.01 Ω Earth voltage: 0-200VAC, Resolution-0.1V, Accuracy: 2%of Range. Selectable Test frequency 128 Hz ± 0.5 Hz, Maximum open circuit output voltage 36 V, Storage Temperature -20°C to 70 °C, Withstanding voltage 240 V AC, display 3 ½ Digit LCD, Max Reading 1999, Weight Approx 550 grams, Calibration certificate is to be submitted. Make: Fluke

Supply and fixing of 5A-40A AC three phase 450 V, 50 HZ Watt hour meter (3 Phase, 4 wire, CT operated AC static Watt hour meters) covered with suitable metal or plastic box containing glass door for meter reading and 63A 4P MCB enclosed in 4-way DP. The Accuracy class of the Energy meter should be 0.5 conforming to ISI marked to IS 13779/99 with latest amendments on suitable box complete with earth connections. The meter shall be provided with the test reports from central government /NABL approved/ILAC accredited lab to prove conformity to the specification. (preferred make; L & T, HPL, Schneider or another equivalent brand)

Supply and fixing of thermoplastic Distribution control switch board weatherproof design as follows. Incomer: 32A, 4 pole MCB -1 No.;63A double pole changeover with MCB (L&T /Legrand) Outgoing: 32A double pole MCB-3 Nos.