V O Chidambaranar Port Trust Tender

Supply and laying of drain pipe with 9mm insulation with 7mill cloth with lag coating up to the nearest drain points

All kinds of civil work required to complete the installation, including earth excavation, removal, and finishing with paver blocks.

MS frame work for system installation including scaffolding

Supply and Installation of Air curtain at top of the exit door appx 7ft

Design Manufacture supply , Erection Testing and Commissioning of LT floor mounted outdoor type steel cubicle pillar box including 3mm thick sheet steel seprate outer cover with following arrangements and specfications including concrete fountation ,M.S. Base channel bed bolts and nuts etc. Specification: system 415V, 3Phase 4Wire 50 HZ AC supply. Installation : Outdoor type 1) Incomer :400A 4POle main switch with complete operation mechanism external rotary handle, 3 Nos 400 A HRC fuses complete with termination arrangement suitable for the recption of the existing incoming LTUG cable -1Nos. 2) Busbar: Aluminum Bus bar with required length 4 runs of 2 X1/2 Aluminum bus bar #1No. 3)Outgoing : 250A 4pole main switch with complete operation mechanism external rotary handle 4 Nos . 250A HRC fuses complete with termination arrangement sutiable for the reception of the existing incoming LTUG cable #3 Nos. 4)Outgoing : 125A, 4 pole mainswitch with complete operating machanism external rotary handle ,3Nos 125A HRC fuses complete with termination arrangement suitable for the reception of the existing incoming LTUG cable #5 Nos. 5)Outgoing: 63A,10 KA,4 pole MCB #5Nos. 6)Outgoing : 50 MNX contactor ,4pole ,440v coil #1 nos. 7)Outgoing: Analog timer single phase 6KW/43A #1 nos. 8) Digital Multifunction meter: Digital Multifunction meter with RS485 port with required 250/5 CT coil 3 Nos . arrangements with internal wiring etc. 9) providing sutiable MS channel arrangment at bottom for installing the above panel. 10) RYB indicators wherever need 11)Change Over switch : 400A On load changeover switch with suitable external rotary handle -2Nos.

Design Manufacture supply , Erection Testing and Commissioning of LT floor mounted outdoor type steel cubicle pillar box including 3mm thick sheet steel seprate outer cover with following arrangements and specfications including concrete fountation ,M.S. Base channel bed bolts and nuts etc. Specification: system 415V, 3Phase 4Wire 50 HZ AC supply. Installation : Outdoor type 1) Incomer :250A 4POle MCCB with complete operation mechanism external rotary handle, complete with termination arrangement suitable for the recption of the incoming LTUG cable -1Nos. 2) Busbar: Aluminum Bus bar with required length 4 runs of 2 X1/2 Aluminum bus bar #2 No. 3)Outgoing : 63A 4pole MCB with complete operation mechanism 16 Nos . LTUG cable #3 Nos. 4)Digital Trivector meter with communication with required 250/5 CT coil 3 Nos . arrangements with internal wiring with DISCOM(TANGEDCO) Billing Features

Supply and laying of 3 1/2 x 240 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 200mm hume pipe in a trench to be excavate a depth of 0.75mtr putting 0.15mtr layer of sand and refilling and laying paver blocks to make earth good

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry