Tidel Park Limited Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Tidel Park Limited Tender
Electrical Goods and Equipments
Electrical and Electronics
Eprocure
Opening Date29 Sep 2022
Closing Date14 Nov 2022
Tender Amount₹ 21,50,00,000
Costs
EMD
₹ 21,50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_TIDEC_253526_1Bid Award Id
ViewTender No
TIDEL/2022-23/06Tender Authority
Tidel Park Limited ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
33KV HT Outdoor VCB panel (Near RMU )
'Design, supply, installation, testing and commissioning of 33KV HT VCB panel shall be made out of M.S sheet steel clad dust and vermin proof (for outdoor application) with powder coat finish painting of shade RAL 7032, suitable for operation on 33KV 3 Ph, 50 Hz, AC earthed system and comprising of 1No. of 33KV, 800A TP, 1500MVA, 26.2 kA, EDO VCB. The 33KV HT outdoor Panel VCB Board with copper bus bars, inter connections, metering instruments consists of Digital Ammeter, Voltmeter, Frequency meter, Maximum Demand controller , MFM , Dual ratio CTs for metering & protection, dual core PTs, control fuses,MPCB,MCB, RCBOs, RCCB, RYB has indication Lamp, ON,OFF,Trip, SC & TCH indication lamp, TNC switch, PBs, emergency lockable push button, Alarm&Hooter etc., and protection relays consists of 3 O/C + 1 E/F IDMT relay(50,51/50N,51N), under voltage relay(27), over voltage relay(59), frequency relay(81), DC supply supervising relay(80), Trip Ckt supervising relay(95) & Master trip relay(86) etc., & Voltage Surge protection suppressor/devices for Incomer HT VCB and Digital Ammeter, Voltmeter, Multi function meter Dual ratio CTs for metering & protection, control fuses,MPCB,MCB, RCBOs, RCCB, RYB phase indication Lamp, ON,OFF,Trip, SC & TCH indication lamp, TNC switch, emergency lockable push button etc., and protection relays consists of 2 O/C + 1 E/F IDMT relay(50,51/50N,51N), Trip Ckt supervising relay(95) & Master trip relay(86) etc., for outgoing HT VCBs and all required necessary accessories for satisfactory operation and as required by the statutory Electrical authorities as per the detailed specifications & SLD enclosed and 1no isolation earth switch along with in this panel. This panel should have suitable inbuilt power pack (110V DC) as required with fail indication to BMS. The panel shall be extendable at both sides. All relay should be numerical type . The offer should be with all functional components and TANGEDCO /CEIG requirements.
1
-
-
... More
33KV HT 4 VCB Panel at Utility Building-
'Design, supply, installation, testing and commissioning of 33KV HT VCB 4 panel shall be made out of M.S sheet steel clad dust and vermin proof with powder coat finish painting of shade RAL 7032, suitable for operation on 33KV 3 Ph, 50 Hz, AC earthed system and comprising of 1 No. of 33KV, 800A TP, 1500MVA, 26.2 kA EDO VCB as incomer and 3 Nos of 33KV, 800A TP, 1500MVA, 26.2 kA, EDO VCB as outgoings with individual Bus- CT, PT metering cubical . The 33KV HT Indoor 4 Panel VCB Board with copper bus bars, interconnections, metering instruments consists of Digital Ammeter, Voltmeter, Frequency meter, Maximum Demand controller, Dual ratio CTs for metering & protection, dual core PTs, control fuses,MPCB,MCB, RCBOs, RCCB, RYB phase indication Lamp, ON,OFF,Trip, SC & TCH indication lamp, TNC switch, PBs, emergency lockable push button, Alarm&Hooter etc., and protection relays consists of 3 O/C + 1 E/F IDMT relay(50,51/50N,51N), Phase failure relay, Phase reverse relay, under voltage relay(27), over voltage relay(59), frequency relay(81), DC supply supervising relay(80), Trip Ckt supervising relay(95) & Master trip relay(86) etc., & Voltage Surge protection suppressor/devices for Incomer HT VCB and Digital Ammeter, Voltmeter, Multi function meter , Dual ratio CTs for metering & protection, PTs, control fuses,MPCB,MCB, RCBOs, RCCB, RYB phase indication Lamp, ON,OFF,Trip, SC & TCH indication lamp, TNC switch, emergency lockable push button etc., and protection relays consists of 3O/C + 1 E/F IDMT relay(50,51/50N,51N), low set stand by E/F relay (51S) Trip Ckt supervising relay(95), Auxiliary relays for alarm/trip (63 &74) & Master trip relay(86) etc., & Voltage Surge protection suppressor/devices for outgoing HT VCBs and all required necessary accessories for satisfactory operation and as required by the statutory Electrical authorities as per the detailed specifications & SLD enclosed and 1no isolation earth switch along with in this panel. This panel should have suitable inbuilt power pack (110V DC) for the every section of the panel as required. The panel shall be extendable at both sides. All relay should be numerical type .
1
-
-
... More
Design supply and erection of Earth Truck with trolly for 33 KV Breakers- (BUS)
1
-
-
... More
HT CABLES
-
-
-
... More
Supply, laying, testing and commissioning of 3 core 300 sqmm 33KV, XLPE Aluminium conductor individual core screened, PVC sheathed, flat steel strip armoured earthed cable in/ in ground with excavation . (From 33KV RMG to HT single VCB panel, Single VCB to HT indoor VCB 4 panel ). Laying inclusive of Excavation, Cutting of existing ground for supply, laying the above referred cable with RCC truff. Cable to be laid with necessary sand cushioning ,sand fill covering, hv warning protection tape, RCC truff as per standard and CEIG regulations . After laying it is MEP contractor responsibility to make the original surface with proper compaction and hand over to the client. Necessary 33KV cable routing identification post /pillar to be provided with standard intervals as per standard requirements and wherever necessary. Note: Depth of the cable /Hume pipe should be as per the Tangedco /CEIG requirement Necessary warring tape at 300 mm Level and cable warning tile/RCC truff at 800mm level from the NGL/FFL to be provided through out the cable route .
170
-
-
... More
Supply, laying, testing and commissioning of 3 core240 sqmm 33KV, XLPE Aluminium conductor individual core screened, PVC sheathed, flat steel strip armoured earthed cable in hume pipe / cable trench/cable tray (From 33KV HT indoor VCB 4 panel and to individual transformer)
60
-
-
... More
HT Terminations and Joint Kit : Note: All the below termination shall be carried with certified competent person , necessary certification to be produced
-
-
-
... More
Design, supply, termination, testing and commissioning of OUTDOOR type termination kit and accessories suitable for above 33KV, 3 core 300 Sqmm XLPE cable.
1
-
-
... More
Design, supply, termination, testing and commissioning of INDOOR type termination kit and accessories suitable for above 33KV, 3 core 300 Sqmm XLPE cable.
4
-
-
... More
Design, supply, termination, testing and commissioning of OUTDOOR type termination kit and accessories suitable for above 33KV, 3 core 240 Sqmm XLPE cable.
1
-
-
... More
Design, supply, termination, testing and commissioning of INDOOR type termination kit and accessories suitable for above 33KV, 3 core 240 Sqmm XLPE cable.
6
-
-
... More
Design, supply, erection, testing and commissioning of Battery Charger 110V DC 220 AH Trip unit combined with trickle & boost charge facilities with battery bank(SMF) & Distribution Board and as per the detailed specification / drawing enclosed . FCBC charger with DC DB suitable for the specified ( for HT 4 VCB- )
1
-
-
... More
TRANSFORMER 2500kVA 33 KV/433V, DRY TYPE (COPPER WINDING )TRANSFORMER WITH OLTC+ RTCC & AVR- Design, supply, installation, testing and commissioning of 2500 KVA, 33kV/433V DRYTYPE CAST RESIN AN cooled Transformer with on load tap changer & RTCC panel as per the detailed specification enclosed. Transformer Protection relays should be provided, such as Transformer restricted earth fault relay,OLTC surge relay, temperature relay, winding temp relay, Auxiliary relays as per standards. Vendor to be supply the REF and Standby REF protection CTs with suitable to be included in the proposal. The transformer shall be provided with cable termination box on HT side to terminate 3 core 240 Sqmm XLPE cable (with top and bottom cable entry option ) and suitable for terminating sandwich type copper or Aluminium bus duct on LT side 4000A Amps rating all as per the detailed specification and drawing enclosed. The transformer should be suitable for data center, servers, chillers and all type linear and non linear loads NOTE: The rate shall include the following:
The senior service personnel shall be deputed at site for pre-commissioning of the test for the Transformer, HT breakers and test report shall be submitted. The Senior personnel shall attend during the energizing of the HT breakers and Transformer installation. The type test certificate shall be submitted by the successful tenderer. The routine test shall be conducted at the factory which will be witnessed by Client and Architect's Representative. WCT/NCT protection class should be match with panel end OLTC: Vaccum type CTR or its Equivalent make to be provided
Spares list as stated in technical document
3
-
-
... More
Fencing and Yard Leveling :Supply and fixing of 2.4 mtr height Hot dip galvanized weld mesh fencing with vertical angle iron supports spaced as required, 2 Numbers of 2M X 2.5 M double side gate with hinged lock and key, painting with one coat red oxide and two coat aluminium paint, with Construction of 400- 500 mm height ( from FFL ) all around Covering the Switchyard area as required and Necessary MS channel / angle iron support shall be provided. Contractor to refer the site plan
250
-
-
... More
Leveling yards (RMG&HT VCB ) with 40mm blue metal of 150mm depth and 75mm sand cushion below the blue metal in the above yard with all other .
250
-
-
... More
CONTROL CABLES & TERMINATIONS :Supply, laying, testing and commissioning of following sizes of 1100 Volts Copper Multi strand, XLPE insulated, Armoured, FRLS cables
-
-
-
... More
4C x 2.5 Sqmm
400
-
-
... More
12C x 2.5 Sqmm
250
-
-
... More
24C x 2.5 Sqmm
200
-
-
... More
3C x 4 Sqmm
250
-
-
... More
16C x 2.5 Sqmm
250
-
-
... More
End Terminations for above sizes of Copper Armoured Control Cables with all required accessories with double compression glands with suitable size copper lugs, shroud , earth clip etc.
-
-
-
... More
4C x 2.5 Sqmm
24
-
-
... More
12C x 2.5 Sqmm
12
-
-
... More
24C x 2.5 Sqmm
12
-
-
... More
3C x 4 Sqmm
18
-
-
... More
16C x 2.5 Sqmm
12
-
-
... More
HT METERING KIOSK -OUTDOOR TYPE : Supply and installation of HT metering of Kiosk with necessary frame , foundation as per TANGEDCO requirement. Installation charges inclusive of meter fixation charges with its associated control wiring.
1
-
-
... More
SECTION :B' SANDWICH BUSDUCT AND RISING MAINS All installation works should be as complete and as directed by Employer / Employer's representative. The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Design, supply, erection, testing and commissioning of 4000 Amps 65kA indoor IP 55 sandwich type CU 4Pole bus duct with two separate runs of external earth bus bar in the bus duct should be provided with same capacity of Neutral bus bar for entire length of bus duct and the same shall be capable of either withstanding the fault current for 1 minute or half the size of phase bus bar, whichever is higher and suitable support from ceiling as per the detailed specification enclosed. The bus duct should be with straight run, 90 deg. horizontal and Vertical bends., bus bar trunking fittings (elbow, tees, End (Cable) feed Box, end covers, ,horizontal fixing devices,etc.) The horizontal runs of bus bar trunking system shall be supported by hangers at every 1.5 meter. Vertical runs of bus bar trunking system shall be supported by hangers not more than 4m apart and OEM recommendation. The bus duct shall run from transformers to MPCC. The bus duct shall be fabricated as per the detailed specification enclosed.
146
-
-
... More
Design, supply, erection, testing and commissioning of 2500 Amps 65 kA indoor sandwich type IP55 CU 4P bus duct with two separate runs of external earth bus bar in the bus duct should be provided with same capacity of Neutral bus bar for entire length of bus duct and the same shall be capable of either withstanding the fault current for 1 minute or half the size of phase bus bar, whichever is higher and suitable support from ceiling as per the detailed specification enclosed. The bus duct should be with straight run, 90 deg. horizontal and Vertical bends., bus bar trunking fittings (elbow, tees, end End (Cable) feed Box, end covers, , horizontal fixing devices,etc.) The horizontal runs of bus bar trunking system shall be supported by hangers at every 2 meter. Vertical runs of bus bar trunking system shall be supported by hangers not more than 4m apart. The bus duct shall run from DG synch. panel to MPCC panel. The bus duct shall be fabricated as per the detailed specification enclosed.
34
-
-
... More
Design, supply, erection, testing and commissioning of 1600 Amps 65 kA indoor sandwich type IP55 CU 4P bus duct with two separate runs of external earth bus bar in the bus duct should be provided with same capacity of Neutral bus bar for entire length of bus duct and the same shall be capable of either withstanding the fault current for 1 minute or half the size of phase bus bar, whichever is higher and suitable support from ceiling as per the detailed specification enclosed. The bus duct should be with straight run, 90 deg. horizontal and Vertical bends., bus bar trunking fittings (elbow, tees, end End (Cable) feed Box, end covers,, horizontal fixing devices,etc.) The horizontal runs of bus bar trunking system shall be supported by hangers at every 2 meter. Vertical runs of bus bar trunking system shall be supported by hangers not more than 4m apart. The bus duct shall run from DG synch. panel to MPCC panel. The bus duct shall be fabricated as per the detailed specification enclosed.
26
-
-
... More
Design, supply, erection, testing and commissioning of 4000 Amps CU flexible joints suitable to connect DG/Transformer/BBT connections ( sandwich type 4P CU bus duct)/Panels at end terminals including all connecting accessories suitable to similar or bi -metal connection .(RYBN=1 set).
12
-
-
... More
Design, supply, erection, testing and commissioning of 2500 CU flexible joints suitable to connect DG/Transformer/BBT connections ( sandwich type 4P CU bus duct) panels at end terminals including all connecting accessories suitable to similar or bi -metal connection .(RYBN=1 set).
6
-
-
... More
Design, supply, erection, testing and commissioning of 1600 CU flexible joints suitable to connect DG/Transformer/BBT connections ( sandwich type 4P CU bus duct) panels at end terminals including all connecting accessories suitable to similar or bi -metal connection .(RYBN=1 set).
8
-
-
... More
Design, supply, erection, testing and commissioning of 4000 Amps Phase cross changeover box suitable for sandwich type 4P CU bus duct including all accessories. (it will operate in case of phase change over is required as per site condition) (RYBN=1 set)
6
-
-
... More
Design, supply, erection, testing and commissioning of 2500 Amps Phase cross changeover box suitable for sandwich type 4P CU bus duct including all accessories. (it will operate in case of phase change over is required as per site condition) (RYBN=1 set)
3
-
-
... More
Design, supply, erection, testing and commissioning of 1600 Amps Phase cross changeover box suitable for sandwich type 4PCU bus duct including all accessories. (it will operate in case of phase change over is required as per site condition) (RYBN=1 set)
2
-
-
... More
RISNG MAINS AND TAP-OFF BOXES
Note : Rising main and Its associated breakers shall be Type test panels with indication ,lamps, MFM with RS485 , ON//OFF/TRIP status for BMS monitoring .
-
-
-
... More
Supply, Installation, Testing and Commissioning of 4P, 4Wire, 1600A Copper conductor sandwich type Rising Mains with 50X12 mm (2) External GI earthing, Plug in Point at every 500mm, Fire Barriers at every Floor Crossing : Indoor : 50kA The product shall be based on Temp. rise & not on current density and as per technical specification and drawing. Each floor should have minimum three number taping points at a rising main
180
-
-
... More
1600A 50KA 4P MP ACB panel for Lighting and Power rising main Control breaker with Cu flexible connection , adopter boxes for bus terminations. Suitable to terminate Cable at incoming side and 1600A Rising main BBT at outgoing side . Necessary copper flexible to consider at the point of termination
4
-
-
... More
End Covers
8
-
-
... More
Mounting Brackets (Recommended 1Each per 1.5 Mtrs) with spring loaded support
125
-
-
... More
400A Tap Off Box with 50kA 4P MCCB with indication lamp and Dual source energy meter- MFM withRS 485 port
6
-
-
... More
250A Tap Off Box with 50kA 4P MCCB with indication lamp and Dual source energy meter- MFM withRS 485 port
24
-
-
... More
160A Tap Off Box with 50kA 4P MCCB with indication lamp and Dual source energy meter -MFM withRS 485 port
20
-
-
... More
125A Tap Off Box with 50 kA 4P MCCB with indication lamp and Dual source energy meter - MFM withRS 485 port
44
-
-
... More
125A Tap Off Box with 50 kA 4P MCCB with indication lamp and Dual source energy meter - MFM withRS 485 port for AHU
44
-
-
... More
SECTION –C : LT PANEL BOARDS
-
-
-
... More
For all Panel boards in this section section-C, the rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. As mentioned in SLD, MFM WITH RS 485 shall be provided in all panels incomer and MPCC panel's outgoings with necessary CTs, PTs, control switches like MPCB, MCB, ELCB, RCBOs and all other necessary accessories as per the specification and drawing. All the meters should have RS 485 Modbus output for BMS integration and also All ACB & MCCB should have dedicated potential free contacts to monitor (ON/OFF) & TRIP status from BMS system. CT accuracy class shall be 0.5 /0.2 as mentioned at SLD
-
-
-
... More
COMMON NOTE TO INCORPORATE FOR ALL Main and Subpanels:
1) All ACB feeders shall be draw out type, MCCB feeders shall be fixed type . Refer SLD and BOQ for EDO / MDO/ Motorized breakers, Protection relays , meters and its all functional components
2) Except below three points (Point no. 3 & 4), All the breakers which is above 250 A rated breaker should be provided with Microprocessor based release and 250A & below the rated breaker should be provided with thermal magnetic release.
3) The breaker which is feeding the power to UPS should be thermal magnetic breaker in all range.
4) All starter feeders and fire fighting panel feeder should be provided with breaker which is suitable for motor application.
5) All Panels incoming breaker should be provided with microprocessor based release with LSIG.
6)Main l panels should complied with IEC 61439-1&2 ( MPCC- shall be Fully type tested -TTA with internal arc (IEC 61641) test and complete test as per standard requirement & Subpanel shall be partial type tested panel complying IEC 60439 standard) and the manufacturer should have necessary type test certificates and the same to be submitted. (from same OEM)
7) All breakers should have minimum kA rating as mentioned in BOQ. On non availability of specified breaker, immediate higher rating breaker must be provided. Panel vendor should consider all functional components for the complete satisfactory operations
8) All live parts should be shrouded by FRP transparent polycarbonate sheet of 2mm thick
-
-
-
... More
9) All panels incoming breaker and outgoing breakers of MPCC panel should have over current, Time adjustable short circuit and earth fault releases (LSIG).
10) All LT panels (Except MPCC panel) outgoing breakers should have over current and adjustable short circuit.
11) All panels incoming feeder and outgoing feeders of MPCC panel should have Dual source Multi function meter with energy consumption function with RS 485 communication port
12) Surge Arrester to be provided in all panels incoming feeder and the same should be connected to the main earth grid directly.
13) All panel's bus bar should be capable of either withstanding continuous rated Amps rating or to withstand the fault current for 1 minute, whichever is higher.
14) All the earthing busbar in the panel should be provided with same capacity for entire length of panel and the same shall be capable of either withstanding the fault current for 1 minute or half the size of neutral busbar, whichever is higher. 15 ) The busbar should be provided either based on the temperature rise limit or the current density of 0.8A/sqmm and 1.0A/sqmm for aluminium and copper respectively, whichever is higher.
16) All meters should be digital type and all relays should be numerical type with RS 485 /MODBUS communication port 17) All MCCBs should have LOTO provision.
18) All panel should have the provision to receive the pipe lines for proposed panel gas flooding system
19) All details mentioned at BOQ and SLD should be taken into consideration. Next higher side to be consider if the specified items obsolete /not available 20 ) All meter's looped into RS 485 MODBUS communication cable in series and terminated at common meter chamber for BMS feedback.
-
-
-
... More
COMMON NOTE TO INCORPORATE FOR ALL MPCC panels: All the Outgoing feeder shall be ON/OFF/Trip indication lamps, emergency lockable push buttons, all ACB and MCCBs should have two (spare) potential free contactor for BMS monitoring, Combined digital type Multi function meter with RS485 port. All ACB feeders should have TNC switch. The rate shall inclusive of necessary CTs, control switches, Front operating handles etc., All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing. The board shall be fabricated for future extension of the panel board. The transformers, DG incomers and Bus coupler shall be provided with protection relays such as IDMT (2O/C + E/F), REFR (Restricted Earth fault Relay) etc., both the incomer's shall be interlocked with mechanical and electrical arrangements by hardware control wiring along with PLC with Hot stand by PLC (Programmable Logic Controls). The Hardware control wiring & PLC operation shall be feasible to extend for future 1 Each Transformer & all as per the detailed specification and drawings enclosed. The PLC should have suitable communication port for BMS integration.
The both incoming & bus coupler breakers should be with energy releases & will measure the following parameters such as current demand, voltages, instantaneous power, power factor, power demand etc. All outgoing breakers shall be with built-in microprocessor based release with overload, short circuit, earth fault, neutral protection,etc.
Incoming meter for Transformer shall be with demand controller, Harmonic THD and individual harmonic display+ Regular parameters like V, I, KVA, KVAR, KW, KWH, KVARh, PF, Freq, Max, AVG All Outgoing Feeders in Main panel shall be with MFM monitoring V,I, KWH, KVARH, PF, Energy consumption reading with RS 485 BMS integration. All the meters to be connected in series thro' bus cable terminated at common meter chamber.
The panel should have the provision to receive the pipe lines for proposed panel gas flooding system
-
-
-
... More
Design, supply, erection, testing and commissioning of cubicle type floor mounting main power control center made out of MS sheet enclosure with copper busbars, single busbar system, cable chamber, interconnection, painting, earthing, protection relays etc. comprising of the following : (MPCC PANEL-1)
INCOMER: 3 Nos. 4000 Amps 4 Pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, & 1 No 3200A 4 Pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, shunt release shutter assembly, with mechanical , electrical interlocks by using with PLC (with Hot stand by ) door interlock and all other accessories. Suitable to operate auto, manual and remote operation . Additionally one number 1000A 4P 65KA ACB with busbar arrangement with required protection as per regulation solar power incomer Instruments Panel All incomers : Providing TNC switch, emergency lockable push button, Maximum demand controller cum multifunction meter with RS485, Ammeter, Voltmeter, Instantaneous over current, earth fault relay (2 O/C+ 1 E/F), Restricted earth fault relay(64R) for the direct transformer incomer and necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs, RYB Indication lamps and “ON/OFF/Trip/Rest" indicating lamp, voltage surge protection with emergency lockable push buttons. 3200A NCT shall be provided in the Transformers side of the neutral and also refer the specification and SLD.
Bus coupler
1 No.4000 Amps 4 pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, shunt release, shutter assembly, door interlock and all other required necessary accessories and ON/OFF/TRIP lamps
The incomer shall be provided with mechanical & electrical Interlocking arrangements with PLC (with hot stand by ). and also should have TNC switch, emergency lockable push button, Ammeter, Voltmeter, indication lamps and instantaneous over current, earth fault relay (2 O/C + 1 E/F), CTs, PTs and control MPCB/MCB/ ELCB/RCBOs with all other necessary accessories and also refer the SLD.
OUTGOINGS 2500A 4P MDO ACB, 65KA – 1 No
2000A 4P MDO ACB, 65kA – 1 No
1250A 4PMDO ACB, 65kA – 4 No
630 A 4P MCCB, 65kA – 3 No
400 A 4P MCCB, 65kA – 2 No
4000Amps 65 kA 4P CU busbars:- All the neutral busbars shall have the same capacity of phase busbars.
1
-
-
... More
Design, supply, erection, testing and commissioning of cubicle type floor mounting main power control center made out of MS sheet enclosure with copper bus bars, single busbar system, cable chamber, interconnection, painting, earthling, protection relays etc. comprising of the following : (MPCC PANEL-2)
incomer: 3 Nos. 4000 Amps 4 Pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, & 1 No 3200A 4 Pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, shunt release shutter assembly, with mechanical , electrical interlocks by using with PLC (with Hot stand by ) door interlock and all other accessories. Suitable to operate auto, manual and remote operation . Additionally one number 1000A 4P 65KA ACB with busbar arrangement with required protection as per regulation solar power incomer Instruments Panel All incomers : Providing TNC switch, emergency lockable push button, Maximum demand controller cum multifunction meter with RS485, Ammeter, Voltmeter, Instantaneous over current, earth fault relay (2 O/C+ 1 E/F), Restricted earth fault relay(64R) for the direct transformer incomer and necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs, RYB Indication lamps and “ON/OFF/Trip/Rest" indicating lamp, voltage surge protection with emergency lockable push buttons. 3200A NCT shall be provided in the Transformers side of the neutral and also refer the specification and SLD. Bus coupler
1 No.4000 Amps 4 pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, shunt release, shutter assembly, door interlock and all other required necessary accessories and ON/OFF/TRIP lamps
The incomer shall be provided with mechanical & electrical Interlocking arrangements with PLC (with hot stand by ). and also should have TNC switch, emergency lockable push button, Ammeter, Voltmeter, indication lamps and instantaneous over current, earth fault relay (2 O/C + 1 E/F), CTs, PTs and control MPCB/MCB/ ELCB/RCBOs with all other necessary accessories and also refer the SLD.
OUTGOINGS
2500A 4P MDO ACB, 65kA – 1 No
1000A 4P MDO ACB, 65kA – 1 No and 1250A 4PMDO ACB, 65 kA – 4 Nos
1600A 4PMDO ACB, 65 kA – 3 No and 630 A 4P MCCB, 65 kA – 3 Nos
400 A 4P MCCB, 65 kA – 2 Nos and 250 A 4P MCCB, 65 kA – 1 Nos
4000Amps 65 kA 4P CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, supply, erection, testing and commissioning of cubicle type floor mounting main power control center made out of MS sheet enclosure with copper bus bars, single busbar system, cable chamber, interconnection, painting, earthing, protection relays etc. comprising of the following : (MPCC PANEL-3)
INCOMING Incomer :3 Nos. 4000 Amps 4 Pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, & 1 No 3200A 4 Pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, shunt release shutter assembly, with mechanical , electrical interlocks by using with PLC (with Hot stand by ) door interlock and all other accessories. Suitable to operate auto, manual and remote operation . Additionally one number 1000A 4P 65KA ACB with busbar arrangement with required protection as per regulation solar power incomer Instruments Panel All incomers : Providing TNC switch, emergency lockable push button, Maximum demand controller cum multifunction meter with RS485, Ammeter, Voltmeter, Instantaneous over current, earth fault relay (2 O/C+ 1 E/F), Restricted earth fault relay(64R) for the direct transformer incomer and necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs, RYB Indication lamps and “ON/OFF/Trip/Rest" indicating lamp, voltage surge protection with emergency lockable push buttons. 3200A NCT shall be provided in the Transformers side of the neutral and also refer the specification and SLD. Bus coupler
1 No.4000 Amps 4 pole 65 kA micro processor based electrical draw out type Air circuit breaker with RS485, shunt release, shutter assembly, door interlock and all other required necessary accessories and ON/OFF/TRIP lamps
The incomer shall be provided with mechanical & electrical Interlocking arrangements with PLC (with hot stand by ). and also should have TNC switch, emergency lockable push button, Ammeter, Voltmeter, indication lamps and instantaneous over current, earth fault relay (2 O/C + 1 E/F), CTs, PTs and control MPCB/MCB/ ELCB/RCBOs with all other necessary accessories and also refer the SLD.
OUTGOINGS
2500A 4P MDO ACB, 65kA – 1 No 1250A 4PMDO ACB, 65 kA – 3 No and 1600A 4PMDO ACB, 65 kA – 3 No
630 A 4P MCCB, 65 kA – 3 No and 400 A 4P MCCB, 65 kA – 7 No
4000Amps 65 kA 4P CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
HYBRID PFCR PANEL:
1100kvar Hybrid Power Quality conditioner / Hybrid Power Factor correction system
Design, fabrication, assembly, testing, supply, installation and commissioning of Hybrid Power Quality conditioner panel with smart integrated hybrid controller and active filters with 3 level topology. The hybrid PQ filter panel shall be fabricated out of 1.6 for side doors and 2mm for structure and front door CRCA sheet steel in cubicle compartment, free-standing, floor mounted, dust and vermin proof with reinforcement of suitable size, angle iron, channel, ‘T’ sections and/or flats wherever necessary. Pre-treatment of the panel shall be carried out before epoxy powder coating of minimum 120 um thickness with nine tank process shall be ensured. The panels shall be designed as per IS16636 and shall adhere to IP 42 protection standard as per IEC 60529. The color of powder coating shall be standard RAL 7035. Louvers shall be of Rittal make only. The locks should be push type 3 pin locks with key. Two numbers of earthing terminals shall be provided on either side of the panel. Cable gland plates with minimum 3mm thickness shall be provided on bottom (or as per client’s requirements) of the panel for top / bottom entry.
The panel shall be suitable for 415V +/- 10%, 3 phase, 4 wire 50Hz +/- 5% supply system. It shall seamlessly integrate active power filters, SVG and passive sections to have a integrated single control and deliver highest performance. The Summation CT reference to to be taken /considered for the PF correction from the two transformer incomer breakers. Vendor to incorporate the CTs and functional components accordingly. Minimum five years free replacement warranty to be provided from the date of commissioning.
The hybrid PQ panel shall be type tested as per IS 16636 / IEC 61921 and should have a valid temperature rise test report from a third party for a rating higher than the proposed rating. The Active filter panel shall comply and should be type tested through any third party testing agency of international repute with IEC 62477-1 : Safety for semiconductor converters and IEC 61000-6-2 and IEC 61000-6-4 for EMI/EMC compliance. The type test report shall be made available for all the active filter ratings individually for which the vendor is quoting. Hybrid PFC Panel shall have a rating of (500KVAR+800A AHF) @ 415V. It shall comprise at least 25% to 30% harmonic with full load required . 800Amp Modular AHF shall be suitable to upgrade in future
The hybrid PQ panel shall be designed for operation in an ambient temperature of 45⁰C as per Indian environmental conditions. The passive section shall be two stage thyristor controlled with minimum 1800 PIV and protected through semiconductor fuses. The passive section shall comprise of MPP type super heavy duty capacitors and 7% Al. detuned reactors with minimum 180% linearity. The audible noise level shall be lesser than 70db at a distance of 1m from the panel. Active filter panel shall have an efficiency of at least 98%. Temperature based de-rating shall be provided to ensure that the system works upto 55 degC with 3% derating with every deg rise in temperature, to protect the system and longer operational life. The response time for the active filter shall be less than 100 usec. suitable Three phase MPCC bus CTs for both incomers and summation cts to be provided by the vendor
-
-
-
... More
The Hybrid PQ conditioner panel shall, in its default configuration, implement the following:
Step-less Power Factor Correction for both leading and lagging current (1st Priority)
Harmonics Compensation up to 31st order (2nd priority)
Load Current Balancing in the three phases (3rd priority)
Neutral compensation (4th priority) (optional, based on user requirement)
Incomer 2500A 65 KA TP N ACB (1.3 times the rating of the panel) having microprocessor based over-current and short-circuit protection and 50kA breaking capacity (Ics) as the incomer of the panel 100% Icu breakers shall be used.
The main incomer shall provide supply to all the passive banks and also to the active filter modules.
Control MCB of rating 10A-FP-10kA-C Curve to provide power supply to the control circuit of the active filter which shall be accessible on opening the front door of the active filter to switch off the control section when necessary.
Display and indications
R,Y,B Indication LED lights and Three phase digital multi function meter should be provided at the main incomer for displaying the three phase current and voltages
Physical On/Off IP66 selector switch shall be provided on the front of the active filter
IP66 7” color touch-screen HMI (human machine interface) with USB connectivity to download log history with ease shall be provided.
The LCD should display all parameters like Currents, Fundamental Current, iTHD, iTDD, Aunb, Voltages, vTHD, kW, kVAr, kVA, PF, dPF, Filter Current, Filter Loading (%), Stack Temperature, Ambient Temperature, Filter Runtime, System Runtime etc and also have the provision of a proper fault log with minimum 2 lac logs which can be exported to an external storage device
LCD interface should be able to log 2,00,000 time stamped events and faults in memory
LCD should be capable of displaying individual harmonics for currents and voltages upto 51st order
LCD should be capable of simultaneously displaying current and voltage waveforms. User should be able to select the phases to display.
-
-
-
... More
IGBT based Active technology; 3-Level Topology with Efficiency 98% along with IEC 62477-1 and IEC 61000-6-2, 6-4 EMI/EMC certification from TUV / CPRI
IGBT shall be Infineon/Semikron make Power module IGBTs will be used with junction temperature of 175 degC with TIM
IGBT based 3-Level stacks with complete forced cooling arrangement with high speed blowers .Active filter shall be modular type with master master configuration and the minimum module size should be 150A for ratings above 150A, to ensure high efficiency
Single phase, toroidal, powder core, low loss, low noise inductor designed for high frequency application with noise level 70dB at a distance of 1m. System should use a single inductor/phase . Gate drivers shall be mounted directly on the IGBTs without any interface wires to ensure minimal interference.
Suitably sized three phase stack with provision to overload at least 20% shall be provided to avoid heat runway due to dust accumulation. For example, 60A filter should be designed to run at 75A so that overloading due to thermal runway is inbuilt in the system.
All required hardware’s, software’s, protections, cards, inscription plates, Danger notice board etc., as required to be provided to complete the system
LCL filtering circuit should be present to ensure maximum ripple filtration and to avoid resonance with other loads in the facility. Film capacitors should be used for ripple circuit without deviation. Panel shall also have provision for selection of individual harmonic orders upto 51st for compensation in the harmonic compensation mode through the HMI
All live parts of the system shall be properly shrouded.
The system should be compatible with MODBUS TCP and Ethernet, USB device connectivity to extract logs directly and should have a provision for SD Card for storage
Protections
High speed semi conductor fuses to protect power stack from Bussman / Mersen
Under voltage, Over voltage, Over load, Over DC, Over temperature, Fuse failure, Contactor abnormal etc protections to be implemented
Type 2 surge protection should be present in the system
-
-
-
... More
Passive section (Detuned capacitor banks)
Semiconductor fuses shall be used at the input of thyristor modules
AC capacitors shall be MPP super heavy duty with minimum 10 micron film and 3 year complete replacement warranty. The capacitors shall be 525V and have a standard rating of 33.1 kVAR (@525V) for all banks above 25 kVAR (@415V). For example, in case of 50 kVAR bank, 2 nos of 33.3 kVAR capacitors shall be connected in parallel. Detuned reactor shall be Al. with a minimum linearity of 180% with maximum loss less than 5W per kVAR
Thyristor modules shall have inbuilt power supply and zero crossing detection. The module should display the current flowing in the thyristor module along with the temperature of the module. APFC relay should be provided as a slave to the Active DSP controller and shall have atleast 5mA senstivity and shall be able to function in master when the DSP fails. Single Integrated hybrid controller
The active and passive section shall be able to communicate with each other seamlessly to ensure instantaneous reponse. The Active DSP controller shall communicate with the passive controller to ensure that only coarse correction is done by the passive banks and the fine tuning of the reactive requirement is taken care by the active portion. The active portion shall simultaneously also correct harmonics. HT sensing should be done and the hybrid controller shall be tuned to take care of transformer losses instantaneously APF shall be programmed for reactive compensation on first prioirty and harmonics on second priority to achieve the above scenario. APFC relay should be provided as a backup to the integrated controller to ensure AC capacitors are still in operation even during malfunction of Active filter. Active filter DSP shall act as master and APFC relay as slave and should automatically make APFC relay as master when the DSP fails.
Targets to be achieved :Current and Voltage THD levels as per IEEE 519 - 2014 standard Power factor at the main HT incomer level shall be above 0.995 lag
3
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. HVAC PUMP PANEL-1.
Incoming
630A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer with E & M interlock
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63A TPN MCCB 36 kA - 5 Nos.
200A TPN MCCB 36 kA - 3 Nos.
With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
630 Amps 36kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. HVAC PUMP PANEL-2 630A 4P MCCB 36 kA with all connected accessories –1 No.as incomer with E & M interlock
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63A TPN MCCB 36 kA - 5 Nos. 200A TPN MCCB 36 kA -2 Nos
With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
630 Amps 36kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. HVAC PUMP PANEL-3 630A 4P MCCB 36 kA with all connected accessories –1 No.as incomer with E & M interlock
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63A TPN MCCB 36 kA - 5 Nos. 200A TPN MCCB 36 kA -2 Nos
With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
630 Amps 36kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. CRITICAL PANEL
Incoming
1600A 4P ACB EDO - 50 KA with RS 485 – 2 No.as incomer with Auto change over option Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
1000A TPN ACB 50 kA - 1 No
400A TPN MCCB 50 kA - 4 No
250A TPN MCCB 50 kA - 1 No
With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
1600 Amps 36kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. TERRACE FLOOR VENTILATION PANEL 1 - OUTDOOR TYPE- WEATHER PROOF ENCLOSURES
Incoming
400A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32 A TPN MCCB 36 kA -8 No
63A TPN MCCB 36 kA - 6 No
100A TPN MCCB 36 kA -3 No
With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
400 Amps 36kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. BASEMENT FLOOR VENTILATION PANEL Incoming
400A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63A TPN MCCB 36 kA - 3 No
125A TPN MCCB 36 kA -4 No
With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
400 Amps 36kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. DATA CENTER GF PANEL -1
Incoming
1600 A 4P ACB EDO 50 KA with LSIG and all connected accessories – 2 No with Mechanical interlock
With necessary CU bus bars, interconnections, providing Combined Dual source Digital type Multifunction Meter, cum Energy consumption reading with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
1600 Amps 50 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. VENTILATION PANEL-2 (OUTDOOR TYPE)
Incoming
250 A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A TPN MCCB 36kA -2 No 63A TPN MCCB 36 kA - 2 No 100 TPN MCCB 36 kA -3 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
250 Amps 36 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. LIFT PANEL (OUTDOOR TYPE)
Incoming
400 A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A TPN MCCB 36kA -6 No 63A TPN MCCB 36 kA - 12 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
400 Amps 36 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. VENTILATION PANEL -1 FOR UTILITY
Incoming
315 A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A TPN MCCB 36kA -2 No 63A TPN MCCB 36 kA - 12 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
315 Amps 36 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. MAIN COMMON PANEL
Incoming
400 A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63A TPN MCCB 36kA -2 No 100A TPN MCCB 36 kA - 3 No 200A TPN MCCB 36 kA - 2 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
400 Amps 36 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. COMMON AREA LIGHTING PANEL 1&2 Incoming
100 A 4P MCCB 25 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A 4P MCCB 25kA -5 No 32A DP MCCB 25 kA -9 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
100 Amps 25 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
2
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. COMMON AREA POWER PANEL 1&2 Incoming
200 A 4P MCCB 25 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63 A TPN MCCB 25kA -15 No 100A TPN MCCB 25kA -1 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
200 Amps 25 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
2
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. UTILITY PANEL -1
Incoming
630A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63 A TPN MCCB 36kA -13 No 100A TPN MCCB 36kA -1 No 125A TPN MCCB 36 A -2 No 200A TPN MCCB 36 A -1 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
630 Amps 36 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. UTILITY PANEL -2
Incoming
400A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
63 A TPN MCCB 36kA -2 No 250 TPN MCCB 36kA -3 No 100A TPN MCCB 36kA -1 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
400 Amps 36 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. UTILITY LIGHTING PANEL (SUBSTATION)
Incoming
200A 4P MCCB 25 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A TPN MCCB 25kA -07 No 63A TPN MCCB 25kA -07 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
200 Amps 25 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. KIOSK PANEL Incoming
100A 4P MCCB 25 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A 4P MCCB 25kA -9 No With Dual source Multi function with energy consumption With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
100 Amps 25 kA CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. UG SUMP PANEL - Outdoor Type
Incoming
250A 4P MCCB 36 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A TPN MCCB 36kA -4 No 63A TPN MCCB 36kA -7 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
250 Amps 36 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, erection, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. STP &ETP PANEL - & PLUMBING PANEL Outdoor type
Incoming
200A 4P MCCB 25 kA with all connected accessories – 1 No.as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32A TPN MCCB 25 kA -5 No 63A TPN MCCB 25 kA -5 No With necessary CU bus bars, interconnections, providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
200 Amps 25 kA TPN CU bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
2
-
-
... More
Design, Supply, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. UPS INCOMING PANEL-1
Incoming
250 4P MCCB 36 kA - 2 No with mechanical and electrical interlock with all connected accessories – as incomer- Motorized breaker with Auto, manual On and Off
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
160 4P MCCB 36 kA -3 Nos With necessary CU bus bars, interconnections and providing Combined Digital type dual source Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
250 Amps 36 kA CU TPN bus bars:- All the neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. UPS OUTGOING PANEL-1
Incoming
160 4P MCCB 25 kA - 2 No with suitable for parallel operation Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
100 4P MCCB 25 kA -4 Nos 63 4P MCCB 25 kA -2 Nos With necessary CU bus bars, interconnections and providing Combined Digital type dual source Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
315 Amps 25 kA CU TP+2N bus bars:- Neutral bus bars shall have the twice capacity of phase bus bars.
1
-
-
... More
Design, Supply, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. COMMON AREA EMERGENCY LIGHTING PANEL
Incoming
100A 4P MCCB 25 kA - 1 No with all connected accessories – as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32 A 4P MCCB 25 kA -04 Nos 32 A DP MCCB 25 kA -10 Nos With necessary CU bus bars, interconnections and providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
100 Amps 25 kA CU TPN bus bars:-Neutral bus bars shall have the same capacity of phase bus bars.
1
-
-
... More
Design, Supply, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. UPS HVAC PANEL
Incoming
100A 4P MCCB 25 kA - 1 No with all connected accessories – as incomer
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32 A TPN MCCB 25 kA -03 Nos 32 A DP MCCB 25 kA -11 Nos With necessary CU bus bars, interconnections and providing Combined Digital type Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
100 Amps 25 kA CU TPN bus bars:-Neutral bus bars shall have the same capacity of phase bus bars.
2
-
-
... More
Design, Supply, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. (COMMON AREA EMERGENCY LIGHTING PANEL -2)
Incoming
125 4P MCCB 25 kA - 1 No suitable for parallel operation
Outgoing - All outgoing feeders should be provided with ON/OFF/Trip indication lamp with protection MCB
32 2P MCCB 25 kA -11 Nos 32 4P MCCB 25 kA -7 Nos With necessary CU bus bars, interconnections and providing Combined Digital type dual source Multifunction Meter with RS485, Surge protection device, phase indication lamps etc. in the incoming feeder and also providing ON,OFF,TRIP indication lamps with control MCB/MPCB/ELCB/RCBOs, and necessary CTs, PTs etc. All MCCBs should have two (spare) potential free contactor for BMS monitoring and the same to be wired up to the cable chamber/any common feeder and all as per the specifications and drawings.
200 Amps 25 kA CU TP+2N bus bars:- Neutral bus bars shall have the twice capacity of phase bus bars.
1
-
-
... More
SECTION: D DISTRIBUTION BOARDS
All installation works should be as complete and as directed by Employer / Empolyer's representative. The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Supply, erection, earthing, testing and commissioning of the following MCB DB's IP 42 & WP type Protection Double Door type with powder coated including all interconnections and accessories like bolts, nuts and associated civil works, etc; The rate shall be inclusive of necessary cable/conduit adopter boxes for IN and OUT wiring. 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD WITH MCB 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type/Weather proof type fitted with bus bars and neutral links with single /VTPN,- three phase MCB outgoings and separate way provision for accommodating as per below mentioned MCCBS /MCB/ELCB. .For sub incomers in 3 segments with label holder and provisions for taking up cable for size not less than 35 sq.mm. Space should be covered by suitable blank plates. Contractor to incorporate the all the components specified at SLD and BOQ. All breaker shall be "C" curve type.
-
-
-
... More
PDB (VTPN DB) - 8 WAY: VENTILATION DB -1 &2 and Transformer room( Outdoor Type-) - Supply, fixing, testing and commissioning of the double door type VTPN 8 way MCCB DB comprising of the following :
100 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
32 A TP MCB 10KA – 8 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
3
-
-
... More
PDB (VTPN DB) - 12 WAY: VENTILATION DB -1 ,2,3,4 &5 ( Outdoor Type-) -
Supply, fixing, testing and commissioning of the double door type VTPN 12 way MCCB DB comprising of the following :
63 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
16/20 A TP MCB 10KA – 12 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
5
-
-
... More
PDB (VTPN DB) - 12 WAY: VENTILATION DB -6,7,8,9 Supply, fixing, testing and commissioning of the double door type VTPN 12 way MCCB DB comprising of the following :
63 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
16/20 A TP MCB 10KA – 12 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
4
-
-
... More
PDB (VTPN DB) - 8 WAY: VENTILATION DB -1 &2 ( Outdoor Type-) - Stair Pressurization
Supply, fixing, testing and commissioning of the double door type VTPN 8 way MCCB DB comprising of the following :
100 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
32 A TP MCB 10KA – 8 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
LDB (7 segment DB) - 6 WAY ( For Common Area Normal Lighting - Basement Floor)
Supply, fixing, testing and commissioning of the double door type 6way phase segregation MCB DB comprising of the following :
32A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
32A DP RCBO 30mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 6nos.6/10A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
LDB (7 segment DB) - 6 WAY Outdoor Type ( For Common Area Normal Lighting - Terrace Floor)
Supply, fixing, testing and commissioning of the double door type 6way phase segregation MCB DB comprising of the following :
32A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
32A DP RCBO 30mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 6nos.6/10A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
SPN DB - 12 WAY ( COMMON AREA LIGHTING GF TO 8TH FLOOR )
Supply, fixing, testing and commissioning of the double door type 12way SPN DB comprising of the following with double door Protection IP 54
32A DP RCBO 30 mA – 1 Each as incomer.
6/10A SP MCB 10KA – 10 Nos. as outgoings. C Curve With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
18
-
-
... More
PDB (7 segment DB) - 8 WAY ( For Common Area RAW POWER- Basement Floor) Supply, fixing, testing and commissioning of the double door type 8 way phase segregation MCB DB comprising of the following :
63 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
63 A DP RCBO 100mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 8 nos.20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
PDB (7 segment DB) - 8 WAY (GF,FF,SF)
Supply, fixing, testing and commissioning of the double door type 8 way phase segregation MCB DB comprising of the following :
63 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
63 A DP RCBO 100mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 8 nos.20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
3
-
-
... More
PDB (7 segment DB) - 4 WAY ( For Common Area RAW POWER- GF TO 8TH FLOOR )
Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
63 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
63 A DP RCBO 100mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos.20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
18
-
-
... More
PDB (7 segment DB) - 4 WAY OUTDOOR TYPE ( For TERRACE FLOOR )- Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
63 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
63 A DP RCBO 100mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos.20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc
c.
2
-
-
... More
PDB (VTPN DB) - 12 WAY: ( Outdoor Type-) - FAÇADE CLEARING Supply, fixing, testing and commissioning of the double door type VTPN 12 way MCCB DB comprising of the following :
100 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
32 A TP MCB 10KA – 12 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
LPDB (7 segment DB) - 6 WAY OUTDOOR TYPE ( For LIFTWELL ) & UG SUMP
Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
32 A DP RCBO 30mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 6 nos.6/10/20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
5
-
-
... More
LDB (7 segment DB) - 4 WAY ( For UTILITY BUILDING , STP & SECURITY )
Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
32A DP RCBO 30mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos.6/10A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
6
-
-
... More
EXTERNAL FEEDER PILLAR (for street lights)- Outdoor type Supply, fixing, testing and commissioning of the powder coated weather proof double door type 6way phase segregation MCB DB comprising of the following with suitable 450mm concrete pedestal , mounting frame etc. DB should be suitable fot outdoor condition 63 A 4P MCCB 16KA (C-Curve) – 1Each as main incomer. WITH TIMER , Day light sensor AND 63 A 4P CONTACTOR WITH Auto manual selector 32 A TPN MCCB with ELM – 6 Nos. as Outgoing
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
5
-
-
... More
PDB (VTPN DB) - 8 WAY: PUMP ROOM DB -1,2 ( Outdoor Type-) Supply, fixing, testing and commissioning of the double door type VTPN 8 way MCCB DB comprising of the following :
63 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
32 A TP MCB 10KA – 8 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
PDB (7 segment DB) - 4 WAY OUTDOOR TYPE ( For Security 1 and 2 )- Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
63 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
63 A DP RCBO 100mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos.6/10/ 20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
PDB (VTPN DB) - 6 WAY: Utlity room GF&FF,SF Supply, fixing, testing and commissioning of the double door type VTPN 6 way MCCB DB comprising of the following :
63 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
32 A TP MCB 10KA – 6 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
PDB (VTPN DB) - 6 WAY: Utlity room - Terrace - Outdoor type Supply, fixing, testing and commissioning of the double door type VTPN 6 way MCCB DB comprising of the following :
63 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
32 A TP MCB 10KA – 6 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
1
-
-
... More
LPDB (7 segment DB) - 6 WAY OUTDOOR TYPE Supply, fixing, testing and commissioning of the double door type 6 way phase segregation MCB DB comprising of the following :
32 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
32 A DP RCBO 30mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos.6/10/20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
1
-
-
... More
PDB (VTPN DB) - 8 WAY: UG SUMP DB -1, ( Outdoor Type-) Supply, fixing, testing and commissioning of the double door type VTPN 8 way MCCB DB comprising of the following :
63 A 4P MCCB 16KA with ELM and all other required accessories – 1 Each as incomer.
32 A TP MCB 10KA – 8 Nos. as outgoings.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc. .
1
-
-
... More
PDB (7 segment DB) - 4 WAY OUTDOOR TYPE ( For STP ETP)- Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
63 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
63 A DP RCBO 100mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos. 20A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
1
-
-
... More
ELDB (7 segment DB) - 4 WAY ( For BF )- Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
32 A DP RCBO 30mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos. 6/10A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
1
-
-
... More
SPN - ELDB - 8 WAY DB ( For GF TO 8TH FLOOR )- Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A DP RCBO 30mA – 1 Nos. as phase incomer
6/ 10 A SP MCB – 6 Nos. as outgoing- C Curve
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
9
-
-
... More
SPN ELDB - 8 WAY DB ( For TERRACE )- OUTDOOR TYPE
Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A DP RCBO 30mA – 1 Nos. as phase incomer
6/ 10 A SP MCB – 6 Nos. as outgoing- C Curve
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
1
-
-
... More
SPN -HVAC- 8 WAY DB ( For BF TO TERRACE )- Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A DP RCBO 30mA – 1 Nos. as phase incomer
6/ 10 A SP MCB – 6 Nos. as outgoing- C Curve
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc. .
10
-
-
... More
SPN HVAC - 8 WAY DB ( For TERRACE )- OUTDOOR TYPE
Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A DP RCBO 30mA – 1 Nos. as phase incomer
6/ 10 A SP MCB – 6 Nos. as outgoing- C Curve
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
1
-
-
... More
SPN ELDB ,HVAC , IBMS RMG - 8 WAY -FOR UTILITY AREA, Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A DP RCBO 30 mA10KA (C-Curve) – 1Each as main incomer.
6/ 10 A SP MCB – 6 Nos. as outgoing- C Curve
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
23
-
-
... More
ELDB (7 segment DB) - 4 WAY ( For HVAC , RMG - 4 WAY -FOR UTILITY AREA, )
Supply, fixing, testing and commissioning of the double door type 4 way phase segregation MCB DB comprising of the following :
32 A 4P MCB 10KA (C-Curve) – 1Each as main incomer.
32 A DP RCBO 30mA – 3 Nos. as phase incomer
Each phase incomers shall consist of 4 nos. 6/10A 10KA SP MCB (C-Curve) as outgoings in a separate compartment with necessary phase segregation as required by the Electrical Inspectorate.
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.
2
-
-
... More
ISOLATORS/MCB/COS AND STARTER PANELS :Design, Supply, Installation, testing and commissioning of MS powder coated following type isolator/ MCB enclosure boxes and the boxes shall be fixed in floor/wall with suitable MS frames. The boxes should have suitable knock out provisions for cable IN and OUT and earth connecting terminals in both the sides.
-
-
-
... More
16/20 A 2P MCB 10 KA (C-Curve) with connected accessories. (Outdoor Type )
63
-
-
... More
16/20 A 2P RCBO 10 KA (C-Curve) with connected accessories. (Outdoor Type )
10
-
-
... More
32A 4P MCB 10 KA (C-Curve) with connected accessories.(Outdoor Type )
20
-
-
... More
32A 4P RCBO 10 KA (C-Curve) with connected accessories.(Outdoor Type )
12
-
-
... More
63A 4P MCB 10 KA (C-Curve) with connected accessories.(Outdoor Type )
4
-
-
... More
63A 4P RCBO 10 KA (C-Curve) with connected accessories.(Outdoor Type )
2
-
-
... More
32A 4P MCCB 16 KA with all other necessary connected accessories. (Outdoor Type )
22
-
-
... More
63A 4P MCCB 16 KA with all other necessary connected accessories. (Outdoor Type )
20
-
-
... More
100A 4P MCCB 25 KA with all other necessary connected accessories. Outdoor Type )
4
-
-
... More
STARTER PANELS: Design, supplying, fixing, testing and commissioning of the following 3 phase Starter with MPCB/MCCB breaker, contactor, (type-2 co-ordination) in the suitable size weather proof MS enclosure.The stater panel should have ON, OFF, TRIP indication lamps, MPCBs,control MCB's, Auto / Manual selector switch, ON/OFF push button's,Ammeter with selector switch, single phase preventer, under & over voltage relay, necessary CT's, PTs, indication lamps,NO/NC for remote ON/OFF,TRIP provision to intergrate with BMS systems,Auto/Mannual selector switch.
-
-
-
... More
0.5 to 1.5 KW DOL (single and three phase)starter control panel with, MPCB protection remote on and off thru BMS , status monitoring to BMS
21
-
-
... More
1.1KW DOL Starter
1
-
-
... More
2.2KW DOL Starter
1
-
-
... More
3.7KW DOL Starter
1
-
-
... More
5.5KW DOL Starter
1
-
-
... More
7.5KW STAR/DELTA
1
-
-
... More
Supply, Installation, Testing and Commissioning of the ON/OFF-key lockable push button station with ON/OFF indication lamps fixed in a suitable Weather proof MS enclosure,painting,earthing etc., with necessary frame works & fixing accessories near the equipments as required.
20
-
-
... More
SECTION – E : WIRING AND CONNECTED ACCESSORIES (POWER CIRCUIT WIRING) All installation works should be as complete and as directed by Employer / Employer's representative. The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Supply and laying of 2R-4Sq.mm and 1R - 2.5Sq.mm multistrand copper Fire retardant flexible conductor wire laid with 25mm heavy duty MS Conduit in open system in ceiling and wall with required all supply & fixing accessories. The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface. ) for power sockets
1875
-
-
... More
Supply and laying of 4R-4Sq.mm and 1R - 2.5Sq.mm multistrand copper Fire retardant flexible conductor wire laid with suitable heavy duty MS Conduit in open system in ceiling and wall with required all supply & fixing accessories. The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface. ) for power sockets
810
-
-
... More
Supply and laying of 2R-2.5 Sq.mm and 1R - 2.5Sq.mm multistrand copper Fire retardant flexible conductor wire laid with 25mm heavy duty MS Conduit in open system in ceiling and wall with required all supply & fixing accessories. The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface. ) for power sockets
1750
-
-
... More
Supply and laying of 2R-4Sq.mm and 1R - 2.5Sq.mm multistrand copper Fire retardant flexible conductor laid with 25mm heavy duty PVC Conduit in concealed system with required all accessories.(6/16A General Raw power etc. including necessary bends,elbow,etc, in concealed system below for Power socket Wiring Note: The rate shall be inclusive of necessary chipping, fixing conduit, plastering and to make good finish surface to match with the existing finish.
875
-
-
... More
Supply and laying of 4R-4Sq.mm and 1R - 2.5Sq.mm multistrand copper Fire retardant flexible conductor laid with suitable heavy duty PVC Conduit in concealed system with required all accessories.(6/16A General Raw power etc. including necessary bends,elbow,etc, in concealed system below for Power socket Wiring Note: The rate shall be inclusive of necessary chipping, fixing conduit, plastering and to make good finish surface to match with the existing finish.
225
-
-
... More
Supply and laying of 2R-2.5 Sq.mm and 1R - 2.5Sq.mm multistrand copper Fire retardant flexible conductor laid with 25mm heavy duty PVC Conduit in concealed system with required all accessories.(6/16A General Raw power etc. including necessary bends,elbow,etc, in concealed system below for Power socket Wiring Note: The rate shall be inclusive of necessary chipping, fixing conduit, plastering and to make good finish surface to match with the existing finish.
825
-
-
... More
Supply and laying of following size PVC/MS conduits in floor / wall /ceiling etc. including necessary bends,elbow,etc, in concealed system below the false ceiling on wall/floor and open system on above false ceiling.(for general purpose & for work station etc.)The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface.
-
-
-
... More
40mm dia Heavy duty PVC conduits.
100
-
-
... More
32mm dia Heavy duty PVC conduits.
100
-
-
... More
25mm dia Heavy duty PVC conduits for under floor power wiring
150
-
-
... More
20mm dia Heavy duty PVC conduits.
100
-
-
... More
40mm dia Heavy duty MS conduits.
100
-
-
... More
32mm dia Heavy duty MS conduits.
100
-
-
... More
25mm dia Heavy duty MS conduits.
150
-
-
... More
20mm dia Heavy duty MS conduits.
100
-
-
... More
Supply and fixing of 100mm X100 mmx 75 mm 16 SWG MS BOX with cover , paint ( concealed /surface in floor/wall )
100
-
-
... More
Supply and laying of following runs of Fire retardant flexible multistrand cu conductor in existing floor trunking.
-
-
-
... More
1.5 Sq.mm copper conductor
150
-
-
... More
2.5 Sqmm copper conductor
150
-
-
... More
4.0 Sq.mm copper conductor
200
-
-
... More
6.0 Sq.mm copper conductor
100
-
-
... More
Supply, wiring & termination to the lighting using 2C of 1.5 sqmm Multistrand cu FRLS flexible cable in existing cable tray/ conduit/Cubical panel ( For Meter Loop in Loop Out)
1000
-
-
... More
Supply, wiring & termination to the lighting using 4C of 2.5 sqmm Multistrand cu LSF flexible cable in existing cable tray/ conduit/Cubical panel
250
-
-
... More
Supply, wiring & termination to the lighting using 4C of 4 sqmm Multistrand cu LSF flexible cable in existing cable tray/ conduit/Cubical panel
500
-
-
... More
SECTION – F : WIRING AND CONNECTED ACCESSORIES (POINT WIRING AND CIRCUIT MAINS)
-
-
-
... More
Supply, Wiring to the light points/ 6A plug point using 2 Runs of 2.5 Sq.mm and 1 Run of1.5 Sqmm multi strand Fire retardant flexible conductor in 25 mm MS pipe in concealed /surface mount system in ceiling and wall etc. . The rate should inclusive of supply and fixing of 6 A modular type switch in a suitable size modular box in concealed or in surface mount system including wiring up to the light fittings ,inclusive of metal reinforced flexible hose , ceiling rose, junction boxes, loop in boxes , clamps , supports as required for the complete installation and functions and as per Engineer in charge instructions. Note : Suitable surface mount box switch should be used for the the surface installations
-
-
-
... More
1 Light controlled by 1 switch
400
-
-
... More
1 Fan point controlled by 1 switch with stepped 2 M electronic regulator
10
-
-
... More
Supply, Fixing and testing of 6A socket controlled by 1 switch in existing switch board.
30
-
-
... More
Note: Group light points shall consider as a single points. The successive points will be measured in running meter only.
-
-
-
... More
Supply, wiring & termination to the lighting using 2 Runs of 2.5 sqmm and 1 Run of 1.5 sqmm multi strand Fire retardant flexible conductor in 25mm MS conduit in open system for common area lighting circuit with complete accessories . .Note:-The Quoted rate shall include the cost of conduit and all accessories. (switch control emergency lighting /Direct MCB control lighting /Circuit mains/ shaft lighting/Lift lighting and Successive Light points for the group control lights, w
7500
-
-
... More
Supply, Wiring to the light points/ 6A plug point using 2 Runs of 2.5 Sq.mm and 1 Run of1.5 Sqmm multi strand Fire retardant flexible conductor in 25 mm heavy duty PVC pipe in concealed mount system in ceiling and wall . The rate should inclusive of supply and fixing of 5 A modular type switch in a suitable size modular box in concealed system including wiring up to the light fittings in metal reinforced flexible hose if required as per site condition
-
-
-
... More
1 Light controlled by 1 switch
150
-
-
... More
1 Fan point controlled by 1 switch with stepped 2 M electronic regulator
10
-
-
... More
Note: Group light points shall consider as a single points. The successive points will be measured in running meter only.
-
-
-
... More
Supply, wiring & termination to the lighting using 2 Runs of 2.5 sqmm and 1 Run of 1.5 sqmm multi strand Fire retardant flexible conductor in 25mm PVC conduit in open /Concealed system for common area lighting circuit. Note:-The Quoted rate shall include the cost of conduit and all accessories. (switch control emergency lighting /Direct MCB control lighting /Circuit mains/ shaft lighting/Lift lighting and Successive Light points for the group control lights
2000
-
-
... More
Supply, wiring & termination to the lighting using 3C of 2.5 sqmm XLPE/ CU / FRLS conductor armoured cable in existing cable tray for direct DB control lighting circuit. for direct MCB control General, Emergency lightings
3200
-
-
... More
Supply, Wiring from DB to Circuit mains using 2 Runs of 2.5 Sqmm and 1 Run of 1.5 sqmm multi strand Fire retardant flexible conductor in suitable size MS pipe in surface conduit system in ceiling and wall for circuit main & emergency lighting & staircase lighting
200
-
-
... More
Supply, Wiring from DB to Circuit mains using 2 Runs of 2.5 Sqmm and 1 Run of 1.5 sqmm multi strand Fire retardant flexible conductor in suitable size PVC pipe in concealed system in ceiling and wall for circuit main & emergency lighting & staircase lighting
200
-
-
... More
Supply, laying, testing and commissioning of 3core 2.5 sqmm multistrand PVC- FRLS insulated flexible copper power cable in a existing race ways / conduit in concealed system in floor/ wall / column etc. all complete complying with relevant standard specifications
2500
-
-
... More
Supply, laying, testing and commissioning of 3core 4sqmm multistrand PVC- FRLS insulated flexible copper power cable (FRLS) in a existing race ways / conduit in concealed system in floor/ wall / column etc. all complete complying with relevant standard specifications
1000
-
-
... More
Supply, fixing, testing and commissioning of 1No. 6A modular type Universal socket controlled by 1 Each 10A switch with a suitable size front plate, frame and metal box in recessed/Concealed system.
103
-
-
... More
Supply, fixing, testing and commissioning of 1Each 6/16A modular type socket controlled by 1Each 16A switch with suitable size front plate, frame and metal box in recessed/Concealed system. system.
129
-
-
... More
Supply, fixing, testing and commissioning of 1Each 16A modular type socket controlled by 1Each 16A switch with suitable size front plate, frame and metal box in recessed/Concealed system. system.
95
-
-
... More
Supply, fixing, testing and commissioning of 1 No 6A modular switch and socket socket with suitable size front plate, frame and metal/surface box in recessed/concealed system. (For VRV/ exhaust fan point)
200
-
-
... More
supply, fixing, testing and commissioning of 1 Each of 16A modular switch with front plate, frame and metal box and all other necessary accessories.
25
-
-
... More
Supply, fixing, testing and commissioning of 1 No 16A modular socket and socket socket with suitable size front plate, frame and metal/surface box in recessed/concealed system. (For VRV/ exhaust fan point)
25
-
-
... More
supply, fixing, testing and commissioning of 1 Each of 6A modular switch with front plate, frame and metal box and all other necessary accessories.
20
-
-
... More
supply, fixing, testing and commissioning of 1 Each of 6A modular socket with front plate, frame and metal box and all other necessary accessories.
20
-
-
... More
Design, supply, fixing, testing and commissioning of 32A 5 pin metal clad socket controlled by 32A 4P MCB in a suitable size MS enclosure fixed in open system.
10
-
-
... More
Design, supply, fixing, testing and commissioning of 20A 3 pin metal clad socket controlled by 20A DP MCB in a suitable size MS enclosure fixed in open system.
10
-
-
... More
Design, supply, fixing, testing and commissioning of 32A 5 pin metal clad socket controlled by 32A 4P MCB in a suitable size Weather proof MS enclosure fixed at outdoor
10
-
-
... More
Design, supply, fixing, testing and commissioning of 20A 3 pin metal clad socket controlled by 20A DP MCB in a suitable size Weather proof MS enclosure fixed at outdoor
10
-
-
... More
Supply, fixing, testing and commissioning of RJ-11 shutered modular typeVoice socket with a suitable size front plate, frame and metal box in recessed/Concealed system.
10
-
-
... More
CEILING CABLE MANAGEMENT SYSTEM:
-
-
-
... More
Supply and fixing of the 50mm x 50mm x 1.6mm thick GI cable management system fixed on wall/column/ceiling, including the removable top cover, cable divider and required accessories like flat, tee, angle, end cap etc. complete as required.
50
-
-
... More
Supply and fixing of the 100mm x 50mm x 1.6mm thick GI cable management system fixed on wall/column/ceiling, including the removable top cover, cable divider and required accessories like flat, tee, angle, end cap etc. complete as required.
75
-
-
... More
Supply and fixing of the 100mm x 100mm x 1.6mm thick GI cable management system fixed on wall/column/ceiling, including the removable top cover, cable divider and required accessories like flat, tee, angle, end cap etc. complete as required.
50
-
-
... More
Supply and fixing of the MS powder coated MS Junction for loop-in loop-out cables for EL light points with suitable knock out holes for cable glands, termination arrangement with with earthing and power terminal connector and necessary mounting arrangement on Tray/ roof with MS clamping, screws etc.as required. The rate shall be inclusive of 2 mtr length 3C x 1.5sqmm flexible fire resistant (FRLS) cable with fire rated gland . (For emergency lighting) and 2 No fire rated cable glands with the complete in and out cables terminations to the specified armored FS /FRLScable.
234
-
-
... More
SECTION : G POWER CABLES / TERMINATIONS:
-
-
-
... More
All installation works should be as complete and as directed by Employer / Employer's representative.
-
-
-
... More
The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Supply, laying of following size XLPE insulatated / PVC FRLS insulated armoured cables with aluminium / copper conductors partly laid in existing cable tray and partly laid in wall/ ceiling with suitbale clamps for working voltages up to and including 1100V conforming to IS 1554 part I 1988 for PVC and IS 7098 Part I for XLPE. Cable tray will be measured and paid separately.
-
-
-
... More
3.5 Core 300 Sq.mm XLPE Aluminium armoured cable (FRLS)
12556
-
-
... More
4 Core 300 Sq.mm XLPE Aluminium armoured cable (FRLS)
150
-
-
... More
3.5 Core 240 Sq.mm XLPE Aluminium armoured cable (FRLS)
433
-
-
... More
4 Core 240 Sq.mm XLPE Aluminium armoured cable (FRLS)
1440
-
-
... More
3.5 Core 185 Sq.mm XLPE Aluminium armoured cable (FRLS)
670
-
-
... More
4 Core 185 Sq.mm XLPE Aluminium armoured cable (FRLS)
240
-
-
... More
3.5 Core 120 Sq.mm XLPE Aluminium armoured cable (FRLS)
70
-
-
... More
3.5 Core 70 Sq.mm XLPE Aluminium armoured cable (FRLS)
175
-
-
... More
4 Core 70 Sq.mm XLPE Aluminium armoured cable (FRLS)
110
-
-
... More
3.5 Core 50 Sq.mm XLPE Aluminium armoured cable (FRLS)
325
-
-
... More
4 Core 50 Sq.mm XLPE Aluminium armoured cable (FRLS)
630
-
-
... More
4 Core 35 Sq.mm XLPE Aluminium armoured cable (FRLS)
700
-
-
... More
4 Core 25 Sq.mm XLPE Copper armoured cable (FRLS)
480
-
-
... More
4 Core 25 Sq.mm XLPE Aluminium armoured cable (FRLS)
260
-
-
... More
4 Core 16 Sq.mm XLPE Copper armoured cable -FRLS
3811
-
-
... More
4 Core 10 Sq.mm XLPE Aluminium armoured cable (FRLS)
1500
-
-
... More
4 Core 10 Sq.mm XLPE Copper armoured cable (FRLS)
3498
-
-
... More
3 Core 10 Sq.mm XLPE Copper armoured cable (FRLS)
4901
-
-
... More
4 Core 4 Sq.mm XLPE Copper armoured cable (FRLS)
3040
-
-
... More
3 Core 4 Sq.mm XLPE Copper armoured cable (FRLS)
2540
-
-
... More
1 Core 70 Sq.mm XLPE Copper un armoured cable (FRLS)
1210
-
-
... More
1 Core 50 Sq.mm XLPE Copper unarmoured cable (FRLS )
785
-
-
... More
1 Core 25 Sq.mm XLPE Copper Unarmoured cable (FRLS)
100
-
-
... More
1 Core 16 Sq.mm XLPE Copper Unarmoured cable (FRLS)
100
-
-
... More
Supply and termination of the following size cables with suitable double compression glands with suitable size PVC boot and suitable crimping socket, gland earthing by using copper flexible and all other necessary accessories. (copper sockets for copper cables and Alu. Sockets for alum. Cable)
-
-
-
... More
3.5 Core 300 Sq.mm XLPE Aluminium armoured cable (FRLS)
166
-
-
... More
4 Core 300 Sq.mm XLPE Aluminium armoured cable (FRLS)
4
-
-
... More
3.5 Core 240 Sq.mm XLPE Aluminium armoured cable (FRLS)
6
-
-
... More
4 Core 240 Sq.mm XLPE Aluminium armoured cable (FRLS)
18
-
-
... More
3.5 Core 185 Sq.mm XLPE Aluminium armoured cable (FRLS)
16
-
-
... More
4 Core 185 Sq.mm XLPE Aluminium armoured cable (FRLS)
8
-
-
... More
3.5 Core 120 Sq.mm XLPE Aluminium armoured cable (FRLS)
4
-
-
... More
3.5 Core 70 Sq.mm XLPE Aluminium armoured cable (FRLS)
6
-
-
... More
4 Core 70 Sq.mm XLPE Aluminium armoured cable (FRLS)
4
-
-
... More
3.5 Core 50 Sq.mm XLPE Aluminium armoured cable (FRLS)
14
-
-
... More
4 Core 50 Sq.mm XLPE Aluminium armoured cable (FRLS)
10
-
-
... More
4 Core 35 Sq.mm XLPE Aluminium armoured cable (FRLS)
40
-
-
... More
4 Core 25 Sq.mm XLPE Copper armoured cable (FRLS)
8
-
-
... More
4 Core 25 Sq.mm XLPE Aluminium armoured cable (FRLS)
8
-
-
... More
4 Core 16 Sq.mm XLPE Copper armoured cable (FS)- FRLS
128
-
-
... More
4 Core 10 Sq.mm XLPE Aluminium armoured cable (FRLS)
40
-
-
... More
4 Core 10 Sq.mm XLPE Copper armoured cable (FRLS)
92
-
-
... More
3 Core 10 Sq.mm XLPE Copper armoured cable (FRLS)
124
-
-
... More
4 Core 4 Sq.mm XLPE Copper armoured cable (FRLS)
143
-
-
... More
3 Core 4 Sq.mm XLPE Copper armoured cable (FRLS)
81
-
-
... More
1 Core 70 Sq.mm XLPE insulated Copper un Armoured cable (FRLS)
64
-
-
... More
1 Core 50 Sq.mm XLPE insulated Copper un Armoured cable (FRLS )
30
-
-
... More
1 Core 25 Sq.mm PVC Copper Unarmoured cable (FRLS)
4
-
-
... More
1 Core 16 Sq.mm PVC Copper Unarmoured cable (FRLS)
4
-
-
... More
SECTION – H : EARTHING SYSTEM, CABLE TRAY AND MS ITEMS
-
-
-
... More
All installation works should be as complete and as directed by Employer / Employer's representative.
-
-
-
... More
The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
EARTHING SYSTEM
-
-
-
... More
Supply and installation of earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia 'B' class G.I. pipe and GI earth plate of size 600mm x 600mm x 6mm including 2 runs of 65 x 10mm GI flat up to test link from plate earth electrode, watering funnel and necessary bolt, nut and double washer. Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements (Common body earth)
41
-
-
... More
Supply and installation of earth pipe electrode as per IS 3043 complete with 3 mtr long with 40mm dia 'B' class G.I. pipe and copper earth plate of size 600mm x 600mm x 3mm including 2 runs of 75 x 12mm CU. flat up to test link from plate earth electrode, watering funnel and necessary bolt, nut and double washer. Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements (Transformer Neutral )
6
-
-
... More
Supply and installation of earth pipe electrode as per IS 3043 complete with 3 mtr long with 40mm dia 'B' class G.I. pipe and copper earth plate of size 600mm x 600mm x 3mm including 2 runs of 50 x 10 mm CU. flat up to test link from plate earth electrode, watering funnel and necessary bolt, nut and double washer. Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements (HT panel & Transformer body earth )
20
-
-
... More
Supply and installation of UL listed and CPRI tested copper bonded steel electrode of 17.2 mm dia. With a min. coating thickness of 250 microns and length of 3 meters. 25 kgs of earth enhancing compound needs to be considered to fill the 100mm hole hawker surrounding to the electrode.25x6x300mm copper busbar to be exothermically welded to the electrode. All connection to the busbar shall be exothermically welded as per the drawing and should comply with IEEE 837 and UL approved .The rate shall include excavation of earth, filling with back fill compound, exothermic welding and earth pit marking. The Complete installation shall be as per the drawing and technical specifications. Supply of UL Listed 17.2 mm dia. Copper bonded carbon steel core Electrode tested according to IEC 62561-2 - Similar to OBO Bettermann Universal clamp made of stainless steel - Similar to OBO Bettermann
2
-
-
... More
Supply and laying of following sizes of cu / GI strips with all necessary accessories. The cost is including the required bimetallic strip to make a smooth connectivity between GI and copper strip and also the cost is including the excavation and refilling the soil. The strip should be run minimum 600mm depth from finished ground level /or in the wall with suitable size conical type insulator or clamp with complete fixing accessories. Colour sleeves to be provided for wherever required and as per Engineer in charge instruction
-
-
-
... More
Supply and laying of 75 x 12 mm CU. Flat with required black colour sleeves for transformer neutral
210
-
-
... More
Supply and laying of 50 x 10 mm CU. Flat
662
-
-
... More
Supply and laying of 50 x 6 mm CU. Flat
40
-
-
... More
Supply and laying of 25 x 6 mm CU. flat
100
-
-
... More
Supply and laying of 25 x 3 mm CU. Flat
576
-
-
... More
Supply and laying of 65 x 10 mm G.I flat
2000
-
-
... More
Supply and laying of 50 x 10 mm G.I flat
7594
-
-
... More
Supply and laying of 50 x 6 mm G.I flat
40
-
-
... More
Supply and laying of 40 x 6 mm G.I flat
490
-
-
... More
Supply and laying of 25 x 6 mm G.I flat
760
-
-
... More
Supply and laying of 25 x 3 mm G.I flat
1440
-
-
... More
Supply and laying of 8 gauge bare copper wire
1000
-
-
... More
Supply and laying of 8 gauge bare GI wire
1000
-
-
... More
Supply and Erection of Earth bus 0.5 mtr long using 50 x 6 mm copper flat with suitable conical type insulator
10
-
-
... More
Supply and Erection of Earth bus 0.5 mtr long using 25 x 6 mm copper flat with suitable conical type insulator
15
-
-
... More
Supply and Erection of Earth bus 0.5 mtr long using 50 x 6 mm GI flat with suitable conical type insulator
25
-
-
... More
Perforated type: For Perforated Cable trays designed, tested and confirming to IEC 61537, thickness of cable tray should be according to the manufacturers catalogue. For locally fabricated and non tested tray, thickness should be 2 mm up to span length of 1.5 meter, 2.5 mm for span length between 2 to 3 meter and 3 to 4 mm for span length between 4 and 10 meter NOTE :upto 450 mm all the trays should be supported using the Theread rods. Above 600mm to be used with angle /chennal support which will be measured in sl. 8.36 structrural steel
-
-
-
... More
150mm x 50mm
100
-
-
... More
300mm x 50mm
1200
-
-
... More
450mm x 75mm
250
-
-
... More
600mm x 75mm
392
-
-
... More
Ladder type: For Ladder Cable trays designed, tested and confirming to IEC 61537, thickness of cable tray should be according to the manufacturers catalogue. For locally fabricated and non tested tray, thickness should be 2.5 mm up to span length of 1.5 to 2 meter, 3 mm for span length between 2.5 to 4 meter and 3 to 4 mm for span length between 5 and 10 meter Note upto 450 mm all the trays should be supported using the Theread rods. Above 600mm to be used with angle /chennal support which will be measured in sl. 8.36 structrural steel
-
-
-
... More
300mm x 50mm
165
-
-
... More
450mm x 75mm
30
-
-
... More
600mm x 75mm
30
-
-
... More
1000mm x 110mm
1300
-
-
... More
Supply and erection of GI Cable Tray top cover made out of sheet steel (1.6 mm thick) folded to required shape with adequate number of supports
300
-
-
... More
Supply and Installation of MS flat / angles / channels supports for various purpose if required with various sizes including cutting,welding,grinding,fixing accessories and one coat of primer & two coats of enamel paints, minor civil works like grouting existing floors and walls etc. as required. (Note: The flat / angles/channels weights will be arrived on the basis of theoretical calculation only).
15
-
-
... More
Design, fabrication, supply, erection ,cutting, and fixing of 8 mm thick chequered plate with required MS angles , frame, flats anchors, grouting bridge consisting of columns, beams, bracings, stiffeners, ties, chequered plate covering, railing, ladder etc., with all other accessories for supporting including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying two coats of zinc
chromate red oxide primer and three coats of approved synthetic enamel paint etc. as per site requirements / Engineers in charge instructions. for cable trench covering with structural steel components and all lead sand other materials
200
-
-
... More
GI Mesh (Grid system ) - 3 M x 3 M - for Each floor considered individual Grid - For Individual Floors :Grid Supply of Galvanized Steel Flat 75x 10 mm thickness from earth electrode directly in ground as required. Flat conductor shall be of Hot Dipped and Should be tested and used exclusively for lightning protection earthing system and ring equipotential bonding. ( Each grid : Forming 3 Mx3 M with 1 Mtr interval cross connecting flat with suitable clamp at all cross over portion ,laid in 1.5 Mtr ground from the FFL level, covered with recommended earthing enhancing chemical compound Earth to be connected at earth electrode)
400
-
-
... More
Supply and applying of OBO make Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested
250
-
-
... More
supply and fixing of Cross connector for 75 x 10 GI Flat
160
-
-
... More
supply and fixing of SS Revit /Bolt Nut to make a joint .
500
-
-
... More
Supply and installation of Exothermic welding of 50x6 Cu flat into 75x10mm GI flat for tapping connection
80
-
-
... More
Supply and fixing of CPRI tested maintenance free ,Low carbon copper coated earth rod of 3 meter electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 ( OBO Type No.25 3000 CCER), universal clamp made of SS to connect rod with flat conductor ( OBO Type No. 25 25 RTC) . ,Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested(OBO Type No.OEC 2 25) .Heavy duty earth chamber of 5000kg load bearing capacity to ensure the safety of earthing system (OBO Type No.UFE)
20
-
-
... More
Supply and fixing of 50 x 6 mm OBO make Copper flat conductor with 99.99% pure Oxygen free copper with up to 101 % Conductivity . ( soft temper & 52-58 Harness (Hv))
640
-
-
... More
supply and fixing of Equipotential Bonding Earth Bar ( Main EBB Bar in Ground floor ) with suitable Metal enclosure ( 16 Number of connections ) Main Potential equalization to VDE 0100 part 410 & part 540 , Quick & simple assembly of connection conductors to the contact rail using lock bolts M 10 , The copper Busbar with 6mm thickness , 11 mm Dia. Hole spacing 50 mm for earthing termination . Complies to the requirement of IEC 62561 -1 Tightening torque : 20 Nm ( OBO Type No. 1802 16 )
40
-
-
... More
SECTION – I : SAFETY EQUIPMENTS
-
-
-
... More
All installation works should be as complete and as directed by Employer / Employer's representative.
-
-
-
... More
The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Supply and laying of 1000mmx2000mm wide chequered rubber mat suitable for 33KV installation with ISI mark ( IS 15652:2006)
10
-
-
... More
Supply of tested hand gloves of 33KV grade.
4
-
-
... More
Supply and laying of 2.0mm thick 1000mmx2000mm wide chequered rubber mat with ISI mark suitable for 440V installation .(IS 15625)
150
-
-
... More
Supply and fixing of HT cable route indicator made out of MS flat and angle iron. The cable route marker shall be fixed at both the ends of cable at joints and 15mtrs spacing for straight runs.
30
-
-
... More
Supply and fixing of LT cable route indicator made out of MS flat and angle iron. The cable route marker shall be fixed at both the ends of cable at joints and 15mtrs spacing for straight runs.
150
-
-
... More
Supply and providing shock treatment chart in English, Hindi and Tamil duly framed with 2mm thick glass in front & 6mm thick ply on back as required
10
-
-
... More
Supply and fixing of GI fire buckets with round bottom, each set comprising 4Nos.fire buckets of 9Kg capacity including supply of M.S pedestal stand with hooks suitable for holding of 4Nos of fire buckets, painted with Post Office Red oil paint and letter FIRE on each bucket and filling with sand complete as required. .
8
-
-
... More
Supply and providing St. John make first aid box 18SWG MS sheet duly painted as approved by Indian red cross society complete with all first aid medicines.
10
-
-
... More
Supply & Fixing HT danger notice plate 250mm x 200mm made of MS steel 2mm thick & Vitreous enameled white on both sides and with inscriptions in signal Red on front side as required by the electrical authorities.
4
-
-
... More
Supply & Fixing LT danger notice plate 200mm x 150mm made of MS steel 2mm thick & Vitreous enameled white on both sides and with inscriptions in signal Red on front side as required
15
-
-
... More
Supply & Fixing of MS sheet board of size 500mm x 300mm of 16 SWG with Entry Restricted To Authorized Persons Only near the Main entrance of the Substation. The lettering shall be Black painted on Yellow Back ground.
20
-
-
... More
Supply and fixing of Self contained rechargeable emergency lights consists of 2x 10W LED lamps, automatically switches - ON during power fails and provides illuminations through battery source for 2 hrs, after which the battery automatically cut off to facilitate to quick recharge on the resumption on mains power supply. Once the battery is fully charged it automatically slides into trickle charge to constantly retain the charge and be ready for the immediate use
10
-
-
... More
Supply and fixing of Self contained rechargeable emergency lights consists of 2x 3 W LED lamps, automatically switches - ON during power fails and provides illuminations through battery source for 2 hrs, after which the battery automatically cut off to facilitate to quick recharge on the resumption on mains power supply. Once the battery is fully charged it automatically slides into trickle charge to constantly retain the charge and be ready for the immediate use
10
-
-
... More
SECTION – J LIGHTING LUMINAIRES ( INTERNAL / EXTERNAL ) & FANS
-
-
-
... More
All installation works should be as complete and as directed by Employer / Employer's representative. The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. Samples to be submitted and get approval fom Architect / Consultant before procurement
For LED light fittings, the complete luminaire should have a warranty for 5 years which includes the housing + LED + Driver Supply, fixing, testing and commissioning of the following lighting luminaires with all other necessary accessories inclusive of supports, suspension wire, flexible cable, suitable loop in loop out connector /boxes/ plug in boxes , hooks , ceiling rose etc. all functional components for the satisfactory operation
-
-
-
... More
5.5 WLED down lighter Equivalent to PHILIPS - DN295B LED6S 6500 PSE
Supply , installation of LED down lighter compatible for cell ceiling with system wattage not more than 5.5W and luminaire lumens not less than 600 lumens. The system efficacy shall be 105 lm/W. The housing shall be pressure die-cast aluminium with diffused optics with polycarbonate diffuser for better distribution of light. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 30000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.9, Inbuilt Surge protection in CM ≥ 2.5KV, LED Driver with Voltage range 150-270V AC, Electrical Safety with Class 1 Insulation. Driver shall be potted driver with two terminals of P,L and both driver and luminaire shall be BIS compliance.
89
-
-
... More
7.5W LED down lighter Equivalent to PHILIPS - DN295B LED8S 6500 PSU WH
Supply and installation of LED down lighter compatible with system wattage not more than 7.5W and luminaire lumens not less than 800 lumens. The system efficacy shall be 105 lm/W. The housing shall be die-cast aluminium with diffused optics with polycarbonate diffuser for better distribution of light. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.95, Inbuilt Surge protection in CM ≥ 2.5KV, LED Driver with Voltage range 150-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Driver shall be potted driver with three terminals of P,L,E and both driver and luminaire shall be BIS compliance.
563
-
-
... More
12 W LED down lighter Equivalent to PHILIPS -BN021 LED12S CW PSU / BN150 Supply and installation of 2' LED batten with Co-extruded polycarbonate housing and mounded end caps. The system wattage shall be 12W with system lumens of 1200 lumens and system efficacy of 100 lm / W. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 30000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.95, Inbuilt . BN021 LED12S CW PSU / BN150
40
-
-
... More
14.5 W LED down lighter Equivalent to PHILIPS: DN296B LED15S 6500 PSU WH Supply and installation of IP20 recess round LED down lighter compatible with system wattage not more than 14.5W and luminaire lumens not less than 1500 lumens. The system efficacy shall be 105 lm/W. The housing shall be die-cast aluminium with diffused optics with polycarbonate diffuser for better distribution of light. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.95, Inbuilt Surge protection in CM ≥ 2.5KV, LED Driver with Voltage range 150-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Driver shall be potted driver with three terminals of P,L,E and both driver and luminaire shall be BIS compliance.
14
-
-
... More
Down Light fixture Equivalent to PHILIPS -WTWT150C LED 20S 6500 PSU L120
Supply and installation of IP65 and IK08 4' LED luminaire with special application luminaire shall be designed to provide undisrupted lighting for dusty and humid indoor application. The luminaire shall be with all-weather polycarbonate housing and highly efficient electronics with LED system to offer long useful life even in adverse application and environmental conditions. The luminaire shall be with Co-extruded polycarbonate housing and mounded end caps. The system wattage shall be 16W with system lumens of 2000 lumens and system efficacy of 120 lm / W. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 30000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD20%, Power factor0.95, Inbuilt Surge protection in CM ≥ 2.5KV, Constant Current - Constant Voltage LED Driver with APFC Construction, LED Driver Voltage range 150-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, Electrical Safety with Class 1 Insulation.
260
-
-
... More
LED Bulk head Light fixture Equivalent to PHILIPS -WT202W LED10S CW PSU S3 PC
Supply and installation of IP66 and IK09 LED bulkhead luminaire with PDC Aluminium housing and PC diffuser. The system wattage shall be 10W with system lumens of 1100 lumens and system efficacy of 110 lm / W. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.9, Inbuilt Surge protection in CM ≥ 2.5KV, Constant Current - Constant Voltage LED Driver with APFC Construction, LED Driver Voltage range 150-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, Electrical Safety with Class 1 Insulation.
282
-
-
... More
Surface mount LED Equivalent to PHILIPS - SM261C LED15S-6500PSU WH
Supply and installation of surface mounted LED down lighter with system wattage not more than 15W and luminaire lumens not less than 1600 lumens. The system efficacy shall be 100 lm/W. The housing shall be plastic with diffused optics with polycarbonate diffuser for better distribution of light. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 30000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.9, Inbuilt Surge protection in CM ≥ 2.5KV, LED Driver with Voltage range 150-270V AC. Driver shall be potted driver with BIS compliance.
160
-
-
... More
34 W LED down lighter Equivalent to PHILIPS -BN308C LED40S-6500 L12O PSU WH
Supply and installation of of 4' LED luminaire shall be designed to provide undisrupted lighting for dusty and humid indoor application. The luminaire shall be with all-weather polycarbonate housing and highly efficient electronics with LED system to offer long useful life even in adverse application and environmental conditions. The luminaire shall be with Co-extruded polycarbonate housing and mounded end caps. The system wattage shall be 34W with system lumens of 4000 lumens and system efficacy of 120 lm / W. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.95, Driver Voltage range 140-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, high voltage cutoff & auto restart @320V, phase to phase 440V protection up to 8hrs, Electrical Safety with Class 1 Insulation, Constant Current - Constant Voltage LED Driver with APFC Construction, Driver shall be compatible for auto cut off and restart with deviation to operating voltage also the ripple shall be less 5%.
121
-
-
... More
LED 4' IP 65 Down lighter : Equivalent to PHILIPS - WT201C LED44S 6500 PSU
Supply and installation of IP65 4' LED luminaire with special application luminaire shall be designed to provide undisrupted lighting for dusty and humid indoor application. The luminaire shall be with all-weather extruded aluminium housing and highly efficient electronics with LED system to offer long useful life even in adverse application and environmental conditions. The luminaire shall be with Co-extruded polycarbonate housing and mounded end caps. The system wattage shall be 38W with system lumens of 4400 lumens and system efficacy of 100 lm / W. LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.95, Inbuilt Surge protection in CM ≥ 4.0KV, Constant Current - Constant Voltage LED Driver with APFC Construction, high voltage cutoff & auto restart @320V, phase to phase 440V protection up to 8hrs, LED Driver Voltage range 150-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, Electrical Safety with Class 1 Insulation.
137
-
-
... More
2'x2' recess mount LED fixture Equivalent to PHILIPS -RC380B LED36S 6500 G5 L60 W60
Supply and installation of 2'X2' Recess mounted Full panel LED Luminaire with Housing: CRCA powder coated housing with ABS plastic top cover for better aesthetic finish, high efficient PMMA diffuser, electronic driver duly wired up to terminal block, Wattage ≤ 28W Luminaire lumen≥ 3600lm, LED make: that satisfies IEC62471 Photo biological/RoHS Standards with and system Efficacy of 115lm/W, Colour Temperature-4000K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.95, Inbuilt Surge protection in CM ≥ 3.0KV, Driver Voltage range 150-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard also driver shall be capable of auto restart post auto shut off if the voltage greater 325V, Electrical Safety with Class 1 Insulation. Driver shall be potted driver and both driver and luminaire shall be BIS compliance. driver shall be potted driver and both driver and luminaire shall be BIS compliance. Driver shall be compatible for auto cut off and restart with deviation to operating voltage also the ripple shall be less 5%.
10
-
-
... More
Supply and fixing of Aviation Warning lights LED single doom Aviation fixture Pole mounted or tower mounted Aviation Warning lighting fixture suitable for LED single and double doom options with IP 65/55 rated as per the standard and authority requirements
4
-
-
... More
Surface/Recess/Suspend mount Exit Sign light fixtures -10watts with inbuilt battery back up of 2 hrs proposal should meet the fire and safety code of practice & the respective standard and greater than IP 43
30
-
-
... More
Directional Exit Sign light fixtures -10 watts with inbuilt battery back up of 2 hrs the proposal should to meet the fire and safety code of practice & the respective standards and greater than IP 43
40
-
-
... More
Supply, fixing, testing and commissioning of occupancy sensor for switching off lights in a room or area when it is vacated and thus saving energy. The sensor should be able to load up to 6A and control an area of around 20 sq m for small movements (e.g. deskwork) and 50 sqm for large movements (e.g. walking). It should also have daylight sensing functionality for additional savings. It should switch off lights when sufficient daylight is available or prevent lights from switching on even if presence is detected. The product should operate on 230V AC and have maximum wire length of 100m. It should provide a switch off delay of 1 to 30 mins and should be recess mounted. (Equivalent to Philips - OccuSwitch "LRM1071/00")
40
-
-
... More
Supply, fixing, testing and commissioning of 1200mm sweep single phase ceiling fan with standard down rod, similar to Bajaj Electra 50 (White).
10
-
-
... More
Supply, fixing, testing and commissioning of 1400 RPM heavy duty 380 mm dia single phase exhaust fan with louvers.
50
-
-
... More
External Lighting System For all items in section-I, the rate includes necessary connected civil works, concrete foundation with anchors required and necessary suitable loop in loop out connector flexible cables from the luminaries , Joints, glands supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Design, supply, erection and testing of Hotdip GI octagon pole of 130 A/F in bottom and 70 A/F in top with 3mm thick Single Ornamental bracket. Height of Pole 10Mtrs. above ground level with necessary long bracket including providing necessary base plate fixing arrangements providing . Construction of pillar accommodating MCB and switch housed in weather proof box including wiring to the light fittings with 2 runs of 4 Sq.mm PVC insulated copper conductor, supplying and fixing 4 way 30 A rated terminal block loop in loop out cable arrangements coil earthing etc. the rate shall included for cable in and out through pipe. Note:-The rate shall be quoted for complete set of Pole, Base foundation with cable entry pipe, ,Anchor fastener, internal wiring, pole and terminal earting materials,6A DP MCB box with suitable loop in loop out connector and all necessary accessories and civil cost etc. should be provided as suitable to the requirement
Single bracket type.
52
-
-
... More
Same as above with Double Bracket type
27
-
-
... More
supply and fixing of SITC of high quality integrated LED Luminaire with a system lumen not less than 15000Lm and system wattage of not greater than 120W with an efficiency 110lumen/watt. CCT of 5700K with SDCM of 5 and CRI 70. The housing should be top openable & of high quality pressure die cast aluminum LM6 Alloy with PF 0.95 and THD 10% & Surge Protection of 4KV. Input voltage of 140-270V. Lifetime of 50K hours @L70. Product should be suitable for continuous operation (16-18 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. The luminaire should have Integrated peanut optics to provide a high quality glare free lighting system. The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. The LED used in the luminaire shall be SMD type only of make Lumileds, Osram, Nichia, and CREE & no other make. The luminaire should be compliant to CISPR 15 & IES 61547 (EMC, EMI compliant). The Driver should be potted /encapsulated & should be a BIS approved driver and not a printed circuit board without casing, mounted inside the luminaire. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The minimum length of the luminaire should be 400 mm and the width of the Luminaire should be more than 250mm ensuring a stable optical and thermal management. The number of LED’s should be High Power and not more than 42 in count ensuring uniform light distribution and thermal management . The weight of the luminaire should be 4.5 Kg. It should have a provision of 10KV series SPD. BIS approval for Both Driver and the luminaire needs to be submitted for records. Model Similar to BRP340 LED150 CW SLC
106
-
-
... More
Sup[ply and fixing of 37W LED flood light (IP66) with with a nominal system lumen output of 3500 lumens and a minimum system efficacy of 90 lm/W. System wattage should not exceed 37W.Similar to Philips - BVP 120 LED 35CW FG S1 PSU GR Note: Fixture to be supplied with Suitable wall bracket of Max - 1.5 Mtr long or suitable site requirement with clamp and mounting accessories with loop in out IP 65 metal enclosure
5
-
-
... More
Supply, Installation, Testing and Commissioning of LED Ground Mounted Bollard (0.8 m height) The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI75. The luminaire shall meet IP65 & IK10 rating with THD 20% and PF 0.9. The luminaire housing should made of pressure die cast aluminium with polycarbonate diffuser. The total power consumption should not exceed 8W (including driver). Model similar to Philips Make LED BOLLARD II BCP151 LED3000/WW PSU GR . Note : The rate should inclusive of necessary concrete pedestal , anchors, loop in loop out provision with IP rated junction box with connectors and control
42
-
-
... More
Supply and fixing of of high quality integrated LED Luminaire with a system lumen of 2800Lm and system wattage between 25W with an efficiency 110lumen/watt. CCT of 4000K with SDCM of 5 and CRI 70. The housing should be high quality pressure die cast aluminum LM6 Alloy with PF 0.95 & Surge Protection of 4KV. Input voltage of 140-270V. Operating temperature should be -0 to +50 Deg C. Lifetime of 50K hours @L70. Product should be suitable for continuous operation (16-18 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. The luminaire should have Integrated optics to provide a high quality glare free lighting system. The luminaire should be of Class B Serviceability, Driver Voltage range 140-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, high voltage cutoff & auto restart @320V, phase to phase 440V protection up to 8hrs. The luminaire should be compliant to CISPR 15 & IES 61547 (EMC, EMI compliant). The Driver should be potted /encapsulated & should be a BIS approved driver and not a printed circuit board without casing, mounted inside the luminaire. . BIS approval for Both Driver and the luminaire needs to be submitted for records. Model similar to Philips make : BGP300 LED28 740 PSU PC IN S1 Note : The rate should inclusive of necessary concrete pedestal , anchors, loop in loop out provision with IP rated junction box with connectors and control
4
-
-
... More
supply and Erection of one number of 2 Mtr Lamp post suitable to fix 15W to 25 W LED post top lantern light with 2 core SMC fuse /control box with Hot dip zinc galvanizing and other necessary GI bracket / MS with powder coated bracket and all necessary fixing accessories necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application , inclusive of foundation Foundation materials & labour, Elec. Materials & Al. Paint, Labour for erection & Painting, Ladder hire charge. Rate shall include of (ANCHOR BOLT FOUNDATION ) (Fuse box to Luminaries shall be wired with pvc insulated multistranded flexible copper Trailing Flat/round cable) (Material ratio - 1:1.5:3)
20
-
-
... More
Supply, erection , testing and commissioning of LED POST TOP luminaire of 15 W LED flood light with high pressure die cast housing acting as heat sink in order to ensure better performance of the luminaries. With necessary GI bracket / MS with powder coated bracket and all necessary fixing accessories necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application .
20
-
-
... More
Supply, erection , testing and commissioning of LED midbay symmetric beam luminaire with housing made of single piece pressure die-cast aluminium of system wattage not more than 105W. Luminaire should be best in class energy efficient High bay with innovative Aluminium heat sink ensures longer service life & with dedicated optics to provide precise light distribution of symmetric wide beam angle of 110Deg. Luminaire ambient temperature shall be with +45 Deg C. Luminaire Lumen Output 13500lm, with Luminaire Efficacy of 128lm/W.The luminaire is designed to meet IP 66 and toughened glass with IK 08 classification and compliant with relevant immunity, safety and performance and EMI standards. LED Make that satisfies IEC62471 Photo biological/RoHS Standards with and LED Efficacy of 150lm/W, Colour Temperature-6500K or Higher with LED binning as per ANSI Bin C78.377A, 60deg LED Beam Angle that can be adopted for better height of installation, CRI 80, Life of LED as per L70 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency85%, THD10%, Power factor0.95, Inbuilt Surge protection in CM ≥ 4.0KV, Driver Voltage range 140-270V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard, high voltage cutoff & auto restart @320V, phase to phase 440V protection up to 8hrs, Electrical Safety with Class 1 Insulation, Luminaire luminous Efficacy≥128lm/W. Luminaires and Driver shall be with BIS approved and driver ripple shall be less than 5%. . Model Similar to BY225P LED135S WB CW PSU FG GR
46
-
-
... More
Supply, erection , testing and commissioning of flood light with system wattage less than 100W integral, LED, Surface Mounted Device (SMD), Floodlight luminaire with System efficacy of more than 110 lm/W and with System Lumen Output Minimum 11000 Lumen. LED Flood Light shall be made up of Aluminium Die cast Housing, powder coated. Luminaire shall have two separate compartments for LEDs and driver and both compartments should be hermitically sealed to achieve IP 66 ingress protection. Optical compartment shall be provided with highly efficient, high purity polycarbonate anti dust exposed lenses optics for superior performances. The luminaire shall have PC lens plate with silicon gaskets for IP66 & IK07 protection. LM 80-08 compliant. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. LED Flood Light shall use multiple no's of high power LEDs. The LEDs used shall have High Purity Lens to provide asymmetrical flood light distribution for Uniform lighting and glare free lighting. Operating temperature shall be -0 to 50deg C. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs. The LEDs used in Flood Light should be with CCT of 5700 K and CRI of Minimum 70. LED Driver shall be Isolated type, multistage Constant Current topology driver in metal enclosure with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 4KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. LED driver shall have output short circuit & over voltage protection inbuilt. Driver should have self protection of 440V P2P for 8 hrs and high cut of 325V with auto restart provision. Both LED driver and luminaire should have BIS compliance. Model similar to philips:BVP192 LED110 CW HO NB FG GR PSU
30
-
-
... More
Excavation
-
-
-
... More
Excavation of the 300mm(W) x 750mm(D) cable trench in soil including river sand cushioning (150mm thick both at top and bottom of the cable), brick protection covering (size of brick 220 x 100 x 70 mm) after laying the cable, back filling, ramming and compacting the soiled., as required.
800
-
-
... More
Supply and laying of the following size RCC hume pipes with collar. The cost including excavation to a depth of 750mm to 1000mm from existing ground level,plasterings, back filling, ramping the soil, making the surface to match the original surface as required. 200 mm dia
50
-
-
... More
-same as above with 300 mm dia-
50
-
-
... More
Supply, providing, construction of following size Masonry inspection (Man hole) chamber with cover for hume pipes .The man hole cover shall be provided with heavy duty CI/RCC type for inspection chamber. Chamber size: 600 (L) x1200 (W) x1200mm (D)
10
-
-
... More
Supply, providing, construction of following size Masonry inspection (Man hole) chamber with cover for hume pipes .The man hole cover shall be provided with heavy duty CI/RCC type for inspection chamber. 'Chamber size: 1000 (L) x1200 (W) x1200mm (D)
5
-
-
... More
SECTION - K : LIGHTNING PROTECTION SYSTEM-
-
-
-
... More
Column raising (down conductor & services)
-
-
-
... More
Supply and fixing of Galvanized Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor shall be of Hot Dipped & Cross sectional area of 90mm square According to DIN EN 50164-2 (VDE 0185 part 202) Meets the requirement of VDE0185/305(IS-IEC 62305) Zinc coating: 500 g/m square (Approx:70 micron coating) Should be tested and used exclusively for lightning protection earthing system and ring equipotential bonding. simillar to OBO Type No. 5052 DIN 30X3
880
-
-
... More
Providing and fixing of diagonal clamp at every 1mtr once, For reinforced steel dia incl. corrugation of up to 37mm, Easy and quick installation via only one M10 screw . simillar to OBO Type no : 1814 ST D37
740
-
-
... More
Providing and fixing of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts.simillar to OBO Type No. 166 LS 70 (5226570)
140
-
-
... More
Providing and fixing of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanized iron with necessary screws etc. as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts . simillar to OBO Type No.251 8-10 ( 5312 03 5 )
225
-
-
... More
Providing & fixing of earth fixed point: Made of Stainless Steel, grade 316L. Connection to earthing systems, air terminals and reinforcement. Contact plate: 79 mm diameter, made of rustproof stainless steel (V4A). Clamping bolt 10mm diameter, rustproof (V2A). Including plastic cover for simple installation. simillar to OBO Type no : 205 DG L180 V4A(5420 02 2)
60
-
-
... More
Providing of diagonal clamp ,For reinforced steel dia incl. corrugation of up to 37mm, Easy and quick installation via only one M10 screw . simillar to OBO Type no : 1814 ST D37
60
-
-
... More
Supply and fixing of Lightning counter - To count no of lightning strike & it can record the date and time of the lightning incident also tested as per IEC 62561-6. simillar to OBO Type No. LSC I+II ( 5091 72 2 )
1
-
-
... More
Air Terminal
-
-
-
... More
Supply and fixing of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) , simillar to OBO Type No. RD 8/ALU I (5450 08 6)
620
-
-
... More
Supply and fixing of conductor holder for parapet- Polyamide Conductor holder:
With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.
Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance simillar to OBO Type No. 177 30 M8(5207 46 0 )
510
-
-
... More
supply and fixing of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. simillar to OBO Type No. 165 MBG 8-10 ( 5218 70 0)
110
-
-
... More
Providing of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanized iron with necessary screws etc. as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts . simillar to OBO Type No.251 8-10 ( 5312 03 5 )
46
-
-
... More
Providing and fixing of of expansion piece with connector: For equalizing temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. simillar to OBO Type No. 172 AR ( 5218 92 6 )
25
-
-
... More
Supply and fixing of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanized. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC 62305)(2nos/expansion piece ). simillar to OBO Type No. 249 8-10 ST ( 5311 50 0 )
50
-
-
... More
supply and fixing of Vertical air terminal with accessories: Providing of Air terminals as per IS-IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod :
Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202).
Meets the requirement of VDE0185/305(IS/IEC 62305) 2Mtr Air terminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. simillar to OBO Type No. 101 VL 3000 ( 5401 98 9 ).
10
-
-
... More
Supply and fixing of Accessories : System consist of Fang Fix with base and clamp, on the top air terminal is erected. simillar to OBO Type No. F-FIX 16 ( 5403 20 0 ).
10
-
-
... More
supply and fixing of Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform.16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked.simillar to OBO Type No. F-FIX S16 I ( 5450 08 0 )
20
-
-
... More
Providing & fixing of earth fixed point: Made of Stainless Steel, grade 316L. Connection to earthing systems, air terminals and reinforcement. Contact plate: 79 mm diameter, made of rustproof stainless steel (V4A). Clamping bolt 10mm diameter, rustproof (V2A). Including plastic cover for simple installation. simillar to OBO Type no : 205 DG L180 V4A(5420 02 2)
20
-
-
... More
Providing and fixing of diagonal clamp ,For reinforced steel dia incl. corrugation of up to 37mm, Easy and quick installation via only one M10 screw . simillar to OBO Type no : 1814 ST D37
20
-
-
... More
Providing and fixing of connector -To connect air terminal with earth fixing point . simillar to OBO Type No. 249 8-10 ST ( 5311 50 0 )
20
-
-
... More
Supply and fixing of Fang Fix Junior system - Inclusive of Al interception rod of 1Mtr length(10mm dia ) , Quick mounting of the interception rod in the base using plug technology . simillar to OBO Type No. F-FIX JUNIOR ( 5403 30 8 )
21
-
-
... More
Earthing
-
-
-
... More
Supply and laying of Galvanized Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor shall be of Hot Dipped & Cross sectional area of 90mm square According to DIN EN 50164-2 (VDE 0185 part 202) Meets the requirement of VDE0185/305(IS-IEC 62305) Zinc coating: 500 g/m square (Approx:70 micron coating) Should be tested and used exclusively for lightning protection earthing system and ring equipotential bonding. simillar to OBO Type No. 5052 DIN 30X3
280
-
-
... More
Providing and fixing of Cross connector for Flat: Suitable for 30mm Galvanized steel strip. Installed with 4 nos of hexagonal plate. simillar to OBO Type No. 255 FL30 FT (5314 53 4 )
35
-
-
... More
Providing and fixing of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts.simillar to OBO Type No. 166 LS 70 (5226570)
16
-
-
... More
Providing and fixing of Plastic Corrosion Protection strip: Approx. 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. simillar to OBO Type No.356 50 ( 2360 05 5 )
2
-
-
... More
Supply and fixing of CPRI tested maintenance free ,Low carbon copper coated earth rod of 3 meter electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 ( simillar to OBO Type No. 17 3000 CCER)& is provided with universal clamp made of SS to connect rod with flat conductor ( simillar to OBO Type No. 17 25 RTC) . Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested(simillar to OBO Type No.OEC 2 25) . The above arrangements shall be provided with Heavy duty earth chamber of 5000kg load bearing capacity to ensure the safety of earthing system (simillar to OBO Type No.UFE) .
16
-
-
... More
Lightning protection system: Utility Building, 33KV EB switch room, Security kiosk and Pump house
-
-
-
... More
Supply and fixing of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) , simillar to OBO Type No. RD 8/ALU (5450 086 )
695
-
-
... More
Supply and fixing of Roof conductor holder for parapet- Polyamide Conductor holder:
With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.
Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance simillar to OBO Type No. 177 30 M8(5207 46 0 )
260
-
-
... More
Supply and fixing of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. simillar to OBO Type No. 165 MBG-8-10(5218 70 0)
150
-
-
... More
Supply and fixing of Fang air-termination rod 8 Meter
• Suitable for wind loads according to Euro code 1: DIN EN 1991-1-4
• Tapered air-termination rod
• Suitable for 40 mm isFang tripod stand and isFang support systems simillar to OBO Type No. 101 3B-8000( 5402880 )
12
-
-
... More
Supply and fixing of Isfang interception rod stand : Made of Aluminium . Folding tripod stand for screw less installation of free standing interception rods with dia of 40mm. Roof slope to max.5deg .Incl round 8-10 cross bar for round conductor fastening. simillar to OBO Type No.isFang 3B-150 ( 5408 96 9)
16
-
-
... More
Providing and fixing of Isfang threaded rod : Made of SS,length is of 430mm. Threaded rod to fasten 3 concrete base with tripod stand . To mount the threaded rod edge protection must be drilled. simillar to OBO Type No.isFang 3B-G3 ( 5408 97 3)
48
-
-
... More
Providing and fixing of base for concrete block for mounting the Iscon tripod stand : Made of Polypropylene, Edge protection with through hole. For mounting of isfang threaded rod and concrete block.simillar to OBO Type No. F-FIX - B16 3B ( 5403 23 8 )
48
-
-
... More
Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform.16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked.simillar to OBO Type No. F-FIX S16 I ( 5450 08 0 )
132
-
-
... More
Providing and fixing of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanized iron with necessary screws etc. as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts . simillar to OBO Type No.251 8-10 ( 5312 03 5 )
58
-
-
... More
Providing and fixing of expansion piece with connector: For equalizing temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. simillar to OBO Type No. 172 AR ( 5218 92 6 )
10
-
-
... More
Supply and fixing of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanized. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC 62305)(2nos/expansion piece ). simillar to OBO Type No. 249 8-10 ST ( 5311 50 0 )
16
-
-
... More
Vertical air terminal with accessories: Providing of Air terminals as per IS-IEC -62305 part-3 16mm rod tapered to 10 mm aluminium rod : Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IS/IEC 62305) 4Mtr Air terminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. simillar to OBO Type No. 101 VL 4000 ( 5401 995 ).
1
-
-
... More
Supply and fixing Accessories : System consist of Fang Fix with base and clamp, on the top air terminal is erected. simillar to OBO Type No. F-FIX 16 ( 5403 20 0 ).
1
-
-
... More
Supply and fixing of Fang fix clamp made of SS, lightning tested for 100 KA 10/350 micro sec waveform.16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked.simillar to OBO Type No. F-FIX S16 I ( 5450 08 0 )
2
-
-
... More
Supply and fixing of Folding clamp :To hold 8 mm Al conductor at every 1m dist on the sheet, Holds good up to seaming thickness of up to 20mm . simillar to OBO Type No. FCAH(5450 096)
350
-
-
... More
Supply and fixing of Fang Fix Junior system - Inclusive of Al interception rod of 1Mtr length(10mm dia ) , Quick mounting of the interception rod in the base using plug technology . simillar to OBO Type No. F-FIX JUNIOR ( 5403 30 8 )
22
-
-
... More
Down Conductor
-
-
-
... More
Supply and fixing of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 62305) , simillar to OBO Type No. RD 8/ALU (5450 086 )
325
-
-
... More
Supply and fixing of conductor holder for Side sheet as specified in drawing , Bottom section stainless steel (V2A) with Ø 8.5 mm slot made of Conductor holder of stainless steel (V2A) @ every 1mtr distance. simillar to OBO Type No. 159 VA-V (5217 07 5)
100
-
-
... More
Supply and fixing of Conductor holder for Side wall- Polyamide Conductor holder:
With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.
Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance simillar to OBO Type No. 177 30 M8 (5207 46 0 )
225
-
-
... More
Supply and fixing of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer simillar to OBO Type No. 271 8-10 ( 5317 40 1 )
20
-
-
... More
Supply and fixing of Enclosure for Test joint: RoHS Complied, IP66, 6mm², 500V, IK08, UV resistant, Halogen free Thermoplastic junction box ,installation of cables either directly through the 7 x M25 seals, polypropylene, Light grey.
Overall Dimensions: 114mm X 114mm X57mm, Internal Dimensions: 100mm X 100mm X 48mm simillar to OBO TYPE : T 60 (2007 061)
20
-
-
... More
Supply and fixing of Lightning counter - To count no of lightning strike & it can record the date and time of the lightning incident also tested as per IEC 62561-6. simillar to OBO Type No. LSC I+II ( 5091 72 2 )
2
-
-
... More
Earthing
-
-
-
... More
Supply and fixing of Galvanized Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor shall be of Hot Dipped & Cross sectional area of 90mm square According to DIN EN 50164-2 (VDE 0185 part 202) Meets the requirement of VDE0185/305(IS-IEC 62305) Zinc coating: 500 g/m square (Approx:70 micron coating) Should be tested and used exclusively for lightning protection earthing system and ring equipotential bonding. simillar to OBO Type No. 5052 DIN 30X3
515
-
-
... More
Providing and fixing of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts.simillar to OBO Type No. 166 LS 70 (5226570)
24
-
-
... More
Providing and fixing of Plastic Corrosion Protection strip: Approx. 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. simillar to OBO Type No.356 50 ( 2360 05 5 )
3
-
-
... More
Supply of CPRI tested maintenance free ,Low carbon copper coated earth rod of 3 meter electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 ( simillar to OBO Type No. 17 3000 CCER)& is provided with universal clamp made of SS to connect rod with flat conductor ( simillar to OBO Type No. 17 25 RTC) . Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested(simillar to OBO Type No.OEC 2 25) . The above arrangements shall be provided with Heavy duty earth chamber of 5000kg load bearing capacity to ensure the safety of earthing system (simillar to OBO Type No.UFE) .
24
-
-
... More
SECTION - L : UPS,BATTERIES
-
-
-
... More
All UPS should have at least one spare potential free contacts to integrate with BMS system to know the status like ON, OFF, TRIP, etc.,
-
-
-
... More
Supply, Installation, Testing and commissioning of UPS Rectifier, Inverter, Battery DC Circuit Breaker with necessary MS enclosure, Inbuilt Static BYPASS( Input & output switches and Auto Static & Manual Bypass Switches), necessary cable alley shall be provided if cable entry/exit for UPS unit is from bottom/sides and necessary hardware & software for BMS Integration with communication port RS 485 ( Status Monitoring ), all interconnecting Copper cables (Battery bank to Battery DC Circuit breaker, Battery DC Circuit breaker to UPS complete as required) with necessary adequate size of copper lugs etc., with necessary base channels/supports complete as required and all other necessary accessories required as per below detailed specification.
-
-
-
... More
Design, manufacturing, supply, installation, testing and commissioning of Double conversion, IGBT based rectifier and Inverter, Modular, On-line UPS with 3Phase, 400Volts, 50 Hz, True sine wave, Microprocessor based, transformer less Static UPS system. The Static Switch and intelligent controller shall be suitable for rated capacity of the UPS System. The Display module shall show clear graphical / text based overview of alarms, status data & instructional help. The UPS supplied shall be suitable for Bottom cable entry provision. . The UPS system shall confirming to latest standards and as per detailed specifications along with this BOM & Q. The capacity of UPS system is as below and Technical Datasheet
60kVA/60kW, 3 Phase, 4 wire, ONLINE DOUBLE CONVERTION UPS with inbuilt static and Maintenance bypass switch Load bank testing- There should be provision for UPS functional testing without external load bank. If this is not available in-built, then SAT with load bank and necessary cabling is mandatory. Waveform capture- In-built provision for measuring and recording waveform is required. If this facility is not available in-built, then oscilloscope with aux power supply to be considered in BOQ by UPS vendor . Internal connection between UPS and oscilloscope, and oscilloscope to aux power supply to be done by UPS vendor
AC/DC Capacitor Replacement cost for 5 years & Conformal Coating for Critical PCBs of 60kVA UPS system
-
-
-
... More
Switches within UPS frame-Input, Output, Bypass, Maintenance Bypass Switches required, rated for full frame capacity. If switches are not in-built, then separate termination panel with 4 switches (Input, Output, Bypass, Maintenance Bypass) along with cables to be considered by UPS vendor as per BOQ
Battery Protection- The DC protection shall be ensured by a DC MCCB with under voltage trip coil to isolate the battery bank from UPS during fault at the either side of the DC bus. It shall provide protection against deep discharge of the batteries by automatically disconnecting battery bank from UPS after low battery shutdown. It should have aux contacts to notify the UPS of BCB status
Phase Sequence Corrector kit for each UPS to avoid battery discharging during Input phase sequence reversal & Dust Filter for UPS capacity of 60kVA UPS SNMP and Modbus card for each 60kVA UPS
Paralleling Kit for each 60kVA UPS, VRLA battery System :Supply, installation, testing and commissioning of 12V VRLA batteries for load PF of 0.8 Load for 90min back up for each UPS on full load. Design life should 3-5 years for these batteries. complete with intercell connectors & copper cables, battery stand made out of Powder Coated MS Angles with adequate supports to carry the load of the batteries.
Battery Cables and End termination: Supply, Laying & End termination of Multi strand copper conductor, heat resistant rubber insulated single core flexible Uninywin cable suitable to carry suitable DC current operating voltage.
Uninywin cable suitable to carry DC current as per Back up requirement (10 Meter / as per site requirement )
Cable end termination : The vendor shall submit dimensional GA drawing of complete UPS system, battery rack with batteries, Service bypass Panel and Battery bank calculations along with offer.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements