Technical Education Department Tender

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of single box type 4 feet 20W LED fitting complete with 20W LED tube light with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting with necessary connections. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Renewal by Supply and fixing of single box type 4'20 W LED Fitting complete with electronic driver with TW round block Suspension type with LED Tube with PVC unsheathed leads from terminals to the fitting.etc., complete complying with standard specification and as directed by the departmental officers.

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 4'20W twin box type LED flu Fitting (Higher end) complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the departmental officers.

supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 150W High bay LED IP66 with suitable special type of MS clamps with PVC unsheathed copper leads from terminals to the fittings. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 150Watts LED Flood light Fittings (Higher end) Philips/Havells/ Equivqlent complete with suitable angle iron frame work on the existing post /on wall with PVC Unsheathed Copper leads with MS Clamps and with painting etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb etc., complete complying with standard specification and as directed by the departmental officers.

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 450 mm Air circulator wall fan with suitable bolts and nuts complete with connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 3 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. 63A 4P MCB-1 No 63A 4P 30MA RCCB/ELCB - 1 No 63A DP MCB isolator - 3 Nos 6A to 32A SP MCB - 12 Nos etc., complete complying with standard specification and as directed by the departmental officers.

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 32A DP MCB in suitable sheet steel enclosure in flush with wall with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of 32A FP MCB in suitable sheet steel enclosure in flush with wall with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed FRLS Cu Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire and making good of the concealed position. etc., complete complying with standard specification and as directed by the departmental officers.

Sub switch Panel: Supply and Errection of 315A capacity dust and vermin proof cubical panel board made up of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting fuse switch with HRC fuses arrangement in two vertical rows with one switch over the other, with a central bus bar chamber and two ends one on each side next to the fuse switch chamber and cable alloy conforming to IE rules INCOMER: 315A FP switch disconnector fuse units interior only with HRC fuse Double Break Switch -2 Nos OUTGOING: 250A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch - 2 Nos 125A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch - 5 Nos 63A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -3 Nos (All the TPN Switch should be Siemens with Front Handle)

The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans 2Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus. The fuse Switches should be connected with the phase and natural buses with suitable size of rigid copper flat/rod and each switch should be connected with the 2 Nos earth bus with 2 runs of No.8 SWG rigid Tinned copper rod with suitable lugs. Phase and neutral tinned buses should be tinned properly. The panel should have a separate metering chamber at the top side consisting of 0-600V Voltmeter with Selector Switch, 0-400A Ammeter with Selector Switch and CT arrangement Pilot lamps, toggle switches, fuse unit (Siemens) indicator lamps should be provided with control switches and fuse unit The panel should be Powder Coat paint of approved colour, approved by the site officer and also the danger board .The capacity of the switches size of incoming and out going cable the place to which the supply is feed shall be mounted on switch chamber. The pannel board should be mounted on 75mm x37mm MS channel provided all round at bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 0.75 m from the ground level with necessary earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Sub switch Panel: Supply and Erection of 400A capacity Dust and Vermin Proof Cubical Panel Board made up of 16 SWG CRCA steel with supply and fixing of the following interior mounting fuse switches with HRC fuses arranged in two Horizontal rows with one switch over the other with a central bus bar chamber and two nos of Horizontal cable chambers at the two ends one on each side next to the fuse switch chamber and confirming to IE rules. EB INCOMER: 400A FP switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No DG INCOMER: 400A FP switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No OUTGOING: 315A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch - 1 No 250A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch - 2 Nos 200A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -2Nos 125A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -3 Nos 63A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch -2 Nos (All the TPN Switch should be Siemens / L&T with Front Handle) Suitable

The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans. 2 Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus. The fuse Switches should be connected with the phase and natural buses with suitable size of rigid copper flat/rod and each switch should be connected with the 2 Nos earth bus with 2 runs of No.8 SWG rigid Tinned copper rod with suitable lugs. Phase and neutral tinned buses should be tinned properly. The panel should have a separate metering chamber at the top side consisting of 0-600V Voltmeter with Selector Switch, 0-400A Ammeter with Selector Switch and C.T arrangement Pilot lamps, toggle switches, fuse unit (Siemens) indicator lamps should be provided with control switches and fuse unit The panel should be Powder Coat paint of approved colour, approved by the site officer and also the danger board . The capacity of the switches size of incoming and out going cable the place to which the supply is feed shall be mounted on switch chamber. The pannel board should be mounted on 75mm x37mm MS channel provided all round at bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 0.75 m from the ground level with necessary earth connection. etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 2Run 3 1/2 X 150 sq mm PVC armoured LTUG cable ins suitable size HDPE pipt in a trench excavated at a depth of 0.75 metre and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 2Run 3 1/2 X 150 sq mm PVC armoured LTUG cable in Suitable GI pipe and covering the cable completely with refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 2Run 3 1/2 X 150 sq. mm PVC armoured LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 3 1/2 X 150 sqmm PVC LTUG armoured cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3 1/2 X 150 sq. mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 3 1/2 x 25 sq.mm PVC armoured LTUG cable in as suitable size HDPE pipe in a trench to be excavated at a depth of 0.75metre and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clarnping of 3 1/2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and providing cable end termination of 3-1/2x25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Run of 1 of No.8 SWG copper wire for earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/supports on wall /floor/ground for earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mmx 50mmx 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of LT cable route indicator with suitable angle not less than 38mm x 38mm x 6mm and 0.6mtr long excavation of earth to a depth of 0.6mtr and concreting the ground level and making good of the ground etc., complete complying with standard specification and as directed by the departmental officers.

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench in suitable size HDPE pipe to be excavate data depth of 0.75 metre and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and laying of 4 X 16 sq mm PVC armoured LTUG cable in Suitable GI pipe and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clamping of 4 x 16 sq.mm PVC armoured LTUG cable in GI pipe on post with MS Clamps etc., complete complying with standard specification and as directed by the departmental officers.

Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officers.

Sub Total

GST 18 %