Tamil Nadu Warehousing Corporation Tender

For Ground Floor upto 4.50M Height

Plastering the surface of walls with Cement Mortar 1:5 (One of cement and Five of P.sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of cement paint over one coat of white cement as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Engineer incharge before use on work).

Supplying and fixing of MS angle of size 50x50x6mm of length 1.20m cut and bent to shape and fixing in postion with cement concrete 1:2:4 for tying the 2 ply bared wire and painting the angle with two coats of aluminium paint over one coat of primer etc complete complying with standard specifications

Supplying and fixing of 2 ply 10 gauge four pronged Galvanised barbed wire fencing by angle for horizontally 5 rows and vertically 20cm centre to centre including cost of barbed wire required length lying the barbed wire Galvanaised binding wire etc., complete

OFFICE BUILDING

Clean removal of Cement plaster from walls and racking out joints 20mm deep walls as per standard specifications.

Plastering with Cement Mortar 1:3 (One Sulphate Resistant cement and Three sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of cement paint over one coat of white cement as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Engineer incharge before use on work).

Repair and Servicing the Existing worn out wooden Ventilator etc including cost of replacing materials and labour charges etc complete complying with standard specifications

Painting old wood work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer incharge before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer.

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost of 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone pipe connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

32mm PVC pipe

25mm PVC pipe

Supplying and fixing in position of the following PVC specials best approved quality confirming to ISS and providing leak proof joints with PVC adhesive etc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the PVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc. complete complying with standard specifications. (The PVC specials should be got approved from the Engineer incharge before use on works).

32mm PVC specials

Coupler

Elbow

Bend

Tee

Reducer 32mm x 25mm

Reducer Tee 32mm x 25mm

Reducer Elbow 32mm x 25mm

Jet nipple

25mm PVC specials

Coupler

Elbow

Bend

Tee

Sub total

GST in 18%