Tamil Nadu Urban Habitat Development Board Tender

Refilling with selected excavated earth other than M-Sand complying with relevant standard specifications for refilling in foundation and basement including spreading in layers not exceeding 15cm thick, watering and consolidation by hand ramming, etc., complete as directed by the departmental officers

Filling in foundation and basement with M-Sand in layers not exceeding 15 cms thick well watered rammed and consolidated complying with relevant standard specification including the cost of supplying river M-Sand etc., complete in all respects as directed by the departmental officers.

Filling in foundation and basement with Quarry dust in layers not exceeding 15 cms thick well watered rammed and consolidated complying with relevant standard specification including the cost of supplying river M-Sand etc., complete in all respects as directed by the departmental officers.

Cement concrete 1:4:8 (one of cement, four of M-Sand and eight of hard broken stone) using 40mm size hard broken stone for foundation inclusive of shoring, strutting, bailing out water, ramming, curing, etc complete as directed by the departmental officers

Supply of Ready Mix Concrete M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of M-Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including the cost of conveyance from plant to site,pumping,hire charges, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will b emade by the Department for the excess usage of materials).

Providing form work for centering, shuttering etc., for all reinforced concrete work as plinth beam, raft beam, raft slab, grade beam etc., including shuttering, 3.00mm high using MS sheet of size 90cm x 60cm and BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., complete as directed by the departmental officer..

Providing form work for centering, shuttering etc., for all reinforced concrete work like Column, window boxing, Sun shade etc., including shuttering,upto 3.00mm high using MS sheet of size 90cm x 60cm and BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., complete as directed by the departmental officer.

Fabricating and placing the following kinds of steel grills Fe 500 D grade steel reinforcement bars as per IS 786-1979 for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., complete in all floors (The rate to include the cost of binding wire steel also) steel rods of all sizes.

Brick work in cement mortar 1:5 (One of cement and five of M-Sand) using II class ground moulded chamber burnt bricks of size 9" x 4⅜" x 2¾" including proper setting, curing, etc., complete in all respects in Foundation and Basement

Brick work in cement mortar 1:6 (One of cement and six of M-Sand) using Fly Ash bricks of Minimun size 23cm×11cm×7cm for super structure in the following floors including fixing the frames of doors and windows, scaffolding, proper setting curing etc, complete in all respects.

Brick Partition wall 11cm thick in cement mortar 1:5 (one of cement and five of M-Sand) using Fly Ash bricks of Minimun size 23cm×11cm×7cm including fixing the frames of doors and windows, scaffolding and proper setting, curing, finishing etc., complete as directed by the departmental officers

Plastering the walls with cement mortar 1:5,(One of cement and five of P-Sand) 12mm thick including providing band cornice curing etc., Complete in all respects as directed by the departmental officers.

Cement concrete 1:5:12.5 (One of cement, five of M-Sand and twelve and half of hard broken stone jelly) using 20mm size broken brick jelly including laying, ramming, curing finishing, etc. complete as directed by the departmental officers

Paving the floor with best quality Vitrified tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with ceramic tiles of approved quality, colour and design anti skid type joint free of size 305mm x 305mm x 6mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one of cement three of M-Sand) 20mm thick and laid straight alignment and pointed neatly with colour cement @ 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specification and as directed by the departmental officers.

Dadooing the walls with colour glazed design tiles of minimum size 15cm x 15cm x 6mm laid in cement mortar 1:2 (one of cement and two of M-Sand), 10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joint and pointing flush with tile surface etc. complete as directed by the departmental officers complete

Supplying and fixing of Oriya type Indian water closet 20" or 50cm size with 'P' or 'S' trap ( white glazed earthern ware of best approved) including concrete packing filling the portion with filling sand, flooring the same area with 7.5cm thick stone jelly lime concrete 32:12-1/2 ( Thirty two of broken stone jelly and twelve and half of lime) No sand using 20mm size stone jelly and finishing the surface with Ceramic tile flooring of minimum size 305mmx305mmx6mm with anti-syphonage connection etc., complete in all respects ( IN GROUND FLOOR)

Supplying and fixing in position White / Colour Glazed Model Floor Mounted uropean Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting (SOR pg97)

Supplying and fixing of teak wood of approved quality for door shutter doors fully panelled 5 Nos with 100 *62 mm (4" & 2 1/2 ") fronzed and shutter 38mm (1 1/2 ") thick pands 22mm (9/8") including 6 Nos of hold fants 50mm*3mm*325mm lays 4 Nos of brass tower bolt 300mm *12mm 2 Nos of brss aldrop 300mm *12mm size , 6 Nos of brass butt hinges 125mm deep , 1no of lock rail hinges bolt 12mm, 4nos of brass handles 200mm size 2 nos of 50mm rubber black and complete as per relavent standared speification and the shutter fixed in position etc... complete in all respects directed by the departmental officers....

Supplying and fixing single shutter solid PVC door shutter with frame of overall size 50x 45 mm with suitable rebate for fixing the shutters of approved quality using 19 gauge, 19 mm M.S. square tube for styles of overall size 50 mm x 30 mm and outer frame 15mm M.S. square tubes for top, lock and bottom rail to a overall size of 75mm x 30mm the steel tubes can be covered - with 5 mm thick solid PVC sheets for paneling shall be rigidly fixed in position including cost and fixing of all necessary furniture fittings etc., complete in all respects as directed by the departmental officers.

Suplying and fixing UPVC (Un - Plasticized Polyvinyl Chloride ) Windows of casement type (open) from the profile the size of outer frame 60mm x 58 mm and shutter profile are reinforcement with GI/ 1 mm 125 GSM and 100% corrosion free, the profiles are profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all edges of frame and shutter the shuttter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned .Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action ,security protective hinges ,strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism netween sash and outer frame that enables opening of the window . The window should be fixed be fixed to the wall with 100% packing with screws and silicon packing all round the frames .The window should be got approved from the Executive Engineer before use on work. (pwd sr page.56, sl.no.191)

Providing and fixing iron grills for closing the opening using square rods as including one coat of red oxide primer cutting ,welding,labour for fixing etc. complete as directed by the departmental officers.

Supplying and fixing of 110mm dia UPVC SWR (Type A) rain water down fall pipe 4kg/cm2 confirming to IS 13590 with 1 No. of PVC bend/elbow and 1 No. of shoe with necessary clamps couplers gratings, teak wood plug etc. complete including fixing in proper position with solvent cement, making holes in the walls good of the dismantled portion with necessary brick work in CM etc. in all respects as directed by the departmental officers.

Supplying and fixing PVC Nahini trap / Floor Trap with PVC grating 100mmx75mm over the bed of brick jelly congrete and fixing in position etc., complte in all respect as directed by departmental officers.

Construction of inspection chamber of size 60cm × 60cm for 0.6m depth with Reinforced cement concrete wall of 15cm thick and base slab of 10cm thick of 1:2:4 proportion (One of cement, two of M-Sand and four of hard broken granite stones ) using 20mm gauge hard broken granite stones including the cost of steel and fabrication of reinforcement grills in position shutterring centering etc.,cement concrete 1:4:8 20mm HBSJ of 10cm thick for foundation including channeling benching etc., and top covered withextra heavy duty cover slab SFRC slab with frame 600mm(clear opening) including casting and fixing in position and necessary earth work excavation, refilling the sides of foundation in all soils except hard rock requiring blasting etc. complete as directed by the departmental officers. 0.60 m depth.

Painting two coats of newely plastered wall surface with ready mixed emulsion paint of first class quality and of approved colour over a priming coat including thorough sscrapping, clean removal of dirt, and including necesssary cement based putty, whereever required etc.,complete complying with standard specification.,

Painting two coats of newely plastered wall surface with ready mixed exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough sscrapping, clean removal of dirt, and including necesssary cement based putty, whereever required etc.,complete complying with standard specification.,

Wiring with 2x1.5sqmm PVC insulated single 1100V grade with ISI mark confirming to ISI 694/1990 in suitable PVC rigid pipe 1.8 mm thick with ISI mark on wall and ceiling with suitable size concelaed 16 gauge MS switch box covered by laminated hylem sheet 3mm thick for LIGHT POINT including the cost of cable, pvc pipe and specials ceiling rose, flush type 5ams SP mark switch PVC junction box 16gauge MS switch box 100mm x 100mm x 75mm covered by laminated hylem sheet 3mm thick, T.W.plugs, cement, labour and ciruit mains etc., complete for open wiring. (with ceiling rose)

Wiring with 2x1.5sqmm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick with ISI mark on wall and ceiling with suitable size concelaed 16 gauge MS switch box300mm x 200mm x 75mm covered by laminated hylem sheet 3mm thick for FAN POINT including the cost of cable, PVC pipes and specials, brass screws, ceiling rose, flush type 5ams SP mark switch PVC junction box 16gauge MS switch box covered by laminated hylem sheet 3mm thick, T.W.plugs, cement, labour and ciruit mains etc., complete for open wiring

Supply and run off 2 of 2.50 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed on walls and ceiling for mains including the cost of cable, PVC pipes and specials, cement, brass screws, TW plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. PB to DB

Supplying and fixing of 5 A /15A 3 pin flush type wall socket with15A flush type switch concealed in suitable MS box in flush with wall andcovered with 3mm thick hylem sheet including cost ofwall socket, switch and labour charges fo wall cutting,grouting, flushing and making good, painting withprimary and finishing coat for MS box etc., complete asdirected by the departmental officers. (SD 138)

Earthing as per ISI Specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoat, common salt, G.I.reducer, checj nuts etc., and mansonry workand providing RCC cover slab 38mm thick for the Brick mansory including cost of steel and fabrication of reinforcement etc., complete in all respectes as directed by the departmental officers. (SD 233)

Supplying and fixing of 4 way single phase DB of 16amps/way with 16amps DP switch with metal glad of 500 volt(side handle) with Fuse and Neutral of suitable T.W. Board of size 40cm x30cmx6.3cm with earth connection etc., complete in all respects as directed by the departemental officers (SD 146)

Supply of ISMB steel girder of all section for roof beams & Columns pg no 24 of SOR pg 24

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted alvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification. (SOR pg 55)

Supplying, Fabricating, erecting and fixing Gypsum board of approved good quality false ceiling 10mm thick provided with 1" x 1" x 18G L angle frame work made of aluminum alround and T section frames at the middle at the reqired intervals including stay with GI wire suspension, provision for lighting arrangements etc.,complete in all respects as directed by the departmental officers. ,

Supplying and fixing in position best quality approved make white gazed earthenware wash approved make white gazed earthenware wash approved make white gazed earthenware wash hand basin of size 550 x 400mm with a pair of cast iton brackets, including cost of 15mm dia brass chromium plated pillar tap, 32mm dia C.P waste coupling, 32mm dia "B" G.I waste pipe, 15mm dia g.M wheel vale\ve, 15mm dia nylon connection 15mm dia brass nipples, 15mm c.P

Supplying of HDPE PVC water storage tank of sintex make or its equivalent having a capacity of 1000 liters with inner white and outer balck ( Double wall )etc.,complete in all respects as directed by the departmental officers.

Supplying the following dia of UPVC pipes of approved quality at site of work as per table II specification of ISS 4985 / 1981 in standard length of 6 m each with one coupler at free of cost for every standard length of pipe. 10Kg / cm2.

32 mm water supply from building to tank

20 mm pipe from tank to toilet

Construction of circular RCC manhole of 1.2m internal dia with Reinforced cement concrete wall of 15cm thick and base slab of 15cm thick of 1:4:8 proportion (One of cement, four of sand and eight of hard broken granite stones ) using 40mm gauge hard broken granite stones including the cost of steel and fabrication of reinforcement grills in position shutterring centering etc., including channeling benching etc., and top covered withextra heavy duty cover slab SFRC slab with frame 600mm(clear opening) including casting and fixing in position and necessary earth work excavation, refilling the sides of foundation in all soils except hard rock requiring blasting etc., complete in all respects

Supplying and Laying SN8 Pipes including earthworks excavations for trenches in hard stiff clay, block cotton , hard red earth, shale, muram, gravel, stoney earth and earth mixed with small size boulder and hard gravely soil depositing earth on banks with initial lead of 10m and initial lift of 2m carting to site of work and lowering in to the trenches aligning, refilling the trenches with excaveted soil, watering, ramming to cosolidation etc,.

Supplying and fixing of 110mm dia PVC Soil Pipe of 6 kg/Sq.cm. pressure confirming to IS 13592/1992 (Type B) of Finolex or equivalent with ISI Monogram of approved quality including packing the joints with rubber lubricant and fixing into the wall with specials including necessary Wooden Plugs, Screws, G.I Holding Down Clamps and chipping the walls wherever necessary and making good of the dismantled portion with brick work or cement mortar, necessary scaffolding including testing etc., complete in all respects as directed by the departmental officers.

Supplying and laying the rubber moulded hydralic precast paver of 63 mm size including the precasting ,finishing and curing the slab, laying and pointing with cement motor 1:3 etc.,Complete in all respects as directed by the departmental officers.

Supplying and fixing of following dia PVC pipes fitting/specials as per IS 4985/1988 of approved quality inluding cost of pipes and labour charges for fixing etc., complete in all respects as directed by the departmental officers.

20mm dia coupler

20mm dia elbow

20mm dia tee

20mm dia end cap

20mm dia tap heavy type

Gate valve.

Added GST @ 18%