Tamil Nadu Tourism Development Corporation Limited Tender

Random Rubble Masonary in cement mortar 1:5 (one cement and five crushed stone sand) - for foundation and Basementl - including simultaneously pointing above ground level with the same mortar etc.,complete - complying with standard specification and as directed by departmental officers.

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 200mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed.

Providing and fixing of artificial synthetic thatch roofing UBUD material winroyal make in sloping surface on corrugated sheet using screws and sealing it with waterproofing membrane and fixing it on fabricated structure as detailed design and drawings. Thatch roof will be screwed in layers by overlaping it. Wherever required thatched ridges are to be provided as per drawing including all cutting and fixing on perimeter of the structure known as strater etc. as complete with all respects complying with relevant standard specification as directed by the departmental officers.

Designing, Providing and fixing in position Hot rolled structural steel Members / Sections consists of MS joists, channels, angles, purlins, pipes, hollow tubes, runners, insert plates, flats etc. at all levels. Surface preparation of all MS members by Sand blasting to SA 21/2 grade and painted with anti corrosive, PU paint (metallic finish) with compatible primer to a minimum film thickness of 75 microns and 2 coats of PU paint of and total dry film thickness 225 microns. Rate to including all materials, labour charges, scaffolding, stagging, transportation, lead & Lifts, wastage, cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for, and the rate to include preparation of fabrication shop drawings for client's approval. etc., as complete with all respects complying with relevant standard specification, as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) The colour of the finish paint shall be approved by the Client / Architect. In case of local weld, fresh treatment shall be repeated with same colour to match with the original and existing Paint. After Service vendor welding works, touch up painting to be done.

Providing Bamboo Structural Support for Roofing Seating Area and Gazebos and Bambpo as cladding in Main pole and in Roof Purlins

Providing the SEATER with best approved quality Stone Slabs of size 1800 x 500/600 of 18 / 20mm thick of stone and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., - complying with standard specifications and as directed by the departmental officers. [The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work]

Supply and laying in position of dressed Stone Slab of 50 to 75mm thick and required size of 0.9m x 0.6m with over a sand bed of 100mm thick for the Eco pathway as directed by Departmental officers etc., complete compling with Standard specifications.

Providing and fixing in position of Architrave Stone pillars - of size 300 x 450 x 1200mm of approved stone pillars - with proper carvings/beadings/scaluptures works - as per the design provided - Neatly dressing, finishing and wax polishing etc. complete - complying with standard specificatons and as directed by the departmental officers. (The Stone size/pattern/quality and design of the scaluptures should be got approved by the Executive Engineer before use on works)

Supplying and fabrication and fixing in position of bambo Readymade Restrooms of Standard Specifications with following sizes. (All materials Should be got approved by the Executive Engineer before fixing in position)

Manufacturing, Supplying and erecting in position of the “ Storage cum First Aid Room” Container of size 10.00m x4.00m x 2.60m (30’L x 12’ W x 8’6”H) made out of 50mm x25mm wooden frames insulated using 35mm thick Thermocoal and lined with 8mm thick MDF sheets paneling. The Container consists of 3 ( three) numbers of Heavy Duty Doors of size 0.90m x 2.10 ( 3’x7’) exterior surface paneled with SS Sheets, 5 ( Five) numbers of Aluminium glazed windows sliding type of size 0.90m x 0.60m ( 3’x2’) with grills using 10mm square rods and G.I sheet rain gutters. The floor of the container fabricated with paywood and the top surface finished with Anti skid vitrified tiles of size 60cm x60cm x8mm thick. 5 (five) numbers of working tables with drawer setup are provided. 7 (seven) numbers of Tube Lights on roof, 1 (one) number 5 AMPS Double switch and 1(one) number 20 AMPS points 8 nos metal clad socket, 3 (three) number of Bulk Head Lights fitted on the top of the Doors on the exterior side, 4 (Four) number of 5AMPS power Sockets for the wall mounted fans, DB with necessary MCB and 32AMPS Tripper and an Electrical inlet provision with 32AMPS Socket. Two wooden partitions to the full height are also provided and 6 (six) numbers of concrete stones of 0.30m x0.30m are provided for mounting the container legs. The Cost is inclusive of all materials, labour charges, transportation charges to the site and all incidental charges.

Providing Volleyball court and all other amenities. Complete., Instruction as per Engineer in-charge.

Supplying and fixing in position best quality approved make, colour glazed Earthenware wash hand basin oval shap of size 500x400mm in granite table top including cost of 15mm brass chromium plated pillar cock 32mm dia CP bottle trap, 15mm dia CP angle valve, 15mm dia brass nipple, 15mm dia Nylon connections including fixing the wash in position with a pair of M.S. angle 50x50x6mm etc. Complete as per standard specification.

Supplying and fixing in position of light colour glazed earthen ware European water closet with 10 litter capacity of low level fiber flush tank of approved quality (Parry ware or equivalent) with 100mm ‘P’ or ‘S’ trap with double flapped colour seat cover with C.P. brass hinges etc. complete with standard specifications

Supplying and fixing in position Indian make colour glazed earthernware lipped mouth flat back magnum urinal of ISI standard and best approved colour urinal of best approved quality with G.I.pipe connection of 32mm, bell mouthed, waste Pipe, 15mm. dia G.M. Gate value bring the urinal to the wall in position with necessary T.W.Plugs, clamps, shellac etc., including dismantling masonry if necessary and readoing the same to original condition fixing the 15mm. dia G.I.pipe and wheel valve. Painting the pipe with two coats of approved paint over one coat of primer and checked without any breakage complete complying with standard specification.

Supplying, laying and jointing of following dia CPVC pipes of approved ISI make and quality including fixing CPVC specials but excluding cost of CPVC specials and cutting, threading of pipes concealing the pipes into wall with necessary clamps and nails , dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete as directed by the Corporation Officers.

40mm dia CPVC pipe

25mm dia CPVC pipe

25mm dia CPVC pipe

Supplying and fixing of CPVC specials of approved quality and make including cost of material but excluding fixing chargerges and conveyance etc. complete.

25 mm Dia CPVC Elbow

25 mm Dia CPVC Tee

25 mm Dia CPVC coupling

25 mm Dia CPVC Union

20mm Dia CPVC Elbow

20mm dia CPVC Tee

20mm dia CPVC Union

20 x 15mm dia CPVC elbow

Supply and installation of FRP/PVC storage water tank with double flab cover of approved quality and make including conveyance and lifting to top of terrace and fixing in position etc., complete. In the tank, necessary holes to be made for inlet, outlet and over flow connections. The rate is including cost and conveyance of all materials and labour for erection etc. complete.

Providing and fixing in position SPIRAL ROTO SLIDERE-03-SLACTUAL EQUIPMENT SIZE:14 X 6 X 10 FT.MINIMUM RECOMMENDED AREA:18 X 10 X 12 FT.CHILDREN CAPACITY: 4 CHILDREN

Providing and fixing in position MULTI SEATER MERRY-GO-ROUNDRE-04-MGR.ACTUAL EQUIPMENT SIZE:DIA 5 FT.MINIMUM RECOMMENDED AREA:DIA 10 FT.CHILDREN CAPACITY: 6 CHILDREN

Providing and fixing in position 2 SEATER ARC SWING RUBBER BELTRE-04-SW ACTUAL EQUIPMENT SIZE:10 X 5 X 10 FT.MINIMUM RECOMMENDED AREA:12 X 8 X 12 FT.CHILDREN CAPACITY: 2 CHILDREN

Providing and fixing in position 4 SEATER SPRING SEE-SAW for ACTUAL EQUIPMENT SIZE:8 X 2 X 3 FT. MINIMUM RECOMMENDED AREA: 12 X 4 X 5 FT. CHILDREN CAPACITY: 4 CHILDREN

Supplying, Providing and fixing Clusttered Wooden logs and stacks. Complete., Instruction as per Engineer in-charge.

Electrical

Supply and fixing of Mars Frost 3ft-03 LED modular Bollard light ORBIT, Havells, Crompton make with suitable concerate pedestal with connection and earthing, Mars Frost 3Ft. 03 LED Modular Bollard Light ORBIT/Havells/Crompton

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (4 points / Coil) Lower End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open PVC conduit Plug point (8 points/ Coil) Lower End

Supply and fixing of 20watts LED Tube light fitting and its electrical connection etc., complete.

Supply and fixing of single box type Lumiline "Havells" 22W Square & Round surface LED wall fitting complete on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting. (ORBIT-ORSF22W) make.

Supply and providing electrical safety & fire fighting accessories complete as detailed below: a) ABC type 6 Kg. Fire Extinguisher. b)ABC type 2 Kg. Fire Extinguisher - 1 No. c) 11KV Rubber Mat of size 2m x 1 m confirming to IS - 1 unit. d) First Aid Box complete with all First Aid medicines - 1 No. e) Shock treatment chart fixed in glass frame - 1 No. f) Fire Buckets - 4 Nos. with MS angle frame stand - No. g) Hand Gloves 11 KV grade - 1 Pair. h) Danger Board with danger caution sticker notices - 1 set.

GST at 18%