Tamil Nadu Housing Board Tender

Cement concrete 1:3:6 (one of cement, three of M-Sand and six of hard broken stone jelly) for foundation and basement using 20mm size hard broken jelly inclusive of shoring, strutting,bailing out water necessary ramming,etc.all complete and as directed by the departmental officer.

Removing and Rearrangeing the aluminium partition, Glass partition and Aluminium door with all fittings including door closure etc., complete in all respects and as directed by the departmental officers.

Supplying, fabricating and fixing in position of Aluminium window/ Ventilator anodized not less than 15 microns confirming to Standard specification made with extruded Aluminium “H” section size 38.5x33x3mm for outer frame. Z section of size 38.5x33x3mm for shutter and intermediate sections of size 59x33x3mm and aluminium clip of size 17.3x17x0.90 mm with MS powder coated stiffner of size 12mm x 3mm for fixing Glass panels with necessary accessories such as Aluminium handles of size 101.6x2.4x3.18mm, Aluminium butterfly hinges of 3”, Aluminium window stay & Pegs of 10”, aluminium hold fast 6”(4mm thick) with suitable Aluminium/ Stainless steel screws and rubber beedings including supplying and fixing of 3mm thick Glass panels and including cost of all materials, labours, power consumption required for fabrication, drilling holes for fixing the aluminium hold fast etc., complete and make the wall in original shape after fixing and as directed by the departmental officers and as per drawings enclosed ( materials should be got approved by Executive Engineer before use) window of size 1.80x1.35m

Supplying and fixing in position of colour Antiskid floor tiles of any size of approved special quality of 6mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete in all respects complying with relevant standard specifications and as directed by the departmental officers. Note:( The colour and quality shall be approved by the competent authority before use .)

Supplying and fixing in position of colour glazed wall tiles of any size 6mm thickness laid in cement mortar 1:2( One of cement and two of sand) 10mm thick for wall facing/adding ,skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete in all respects complying with relevant standard specifications and as directed by the departmental officers. Note:( The Brand, colour and quality should be got approved by the competent authority )

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D – 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials like Elbow, Tee reducers, Plug , union, bend, coupler, nipple etc., wherever required above ground level including the cost of Teflon tape, special clamps, GI Bolts and Nuts, nails, etc., fixing on wall to the proper gradient and alignment and redoing the chipped masonry after the pipes are laid etc., complying with relevant standard specifications & as directed by the departmental officers.

32mm dia ASTM-D schedule 40 threaded Pvc pipe with necessary PVC/GI specials

20mm dia ASTM-D schedule 40 threaded Pvc pipe with necessary PVC/GI specials

'supply and fixing of SS Heavy Duty Long Body Tap 15mm etc., complete in all respects complying with relevant standard specifi- cations and as directed by the Departmental officers

supply and fixing of CP Angle Cock Tap etc., complete in all respects complying with relevant standard specifi- cations and as directed by the Departmental officers

'Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of sand of ten of 40 mm gauge brick jelly) etc., complete as directed by the departmental officers (The PVC Nahani Trap should be got approved from the EE before use)

Supplying and fixing stainless Steel sink of size 600mm x 450mm x 200mm with drain board having thickness not less than 1mm well polished smoothly with necessary C.I .clamps ,screws with sutable waste water pipe etc all complete and as directed by the departmental officers. (The quality and Brand of Sink shall be got approved from the Executive Engineer before use)

Supplying and fixing of Orissa Pan (20”) superior variety 500mm of approved make (to be got approved from EE before use) with P or S trap, including concrete packing filling portion with earth, flooring the area with 75mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of sand and sixteen of brick jelly) using 40mm size brick jelly and top left rough to receive the floor plastering but including antisyphonage connection curing etc. all complete and as directed by the departmental officers.

'Supplying and fixing of wood polymer composit Board (WPC)solid door frame and 25mm thick shutter , frame consist of extruded with size 75mmx50mm . the inner core made if rigid WPC compound minimum shore hardness of 55 and bulk density 0.8 grames/ cub.c mt. the frame shall be fixed to the wall using PVC fasterners . A minumum of 3 nos screw to be provide for each vertical memebers. the overall size of frames shall be suitable rebate for housing the shutters consistes of 25mm thick polymer composite board WPCsingle core extrudedoor shutters with one side single shall have the logo the wpc brand approved.., all complete as directed by the departmental officers. (Fittings provided shall bear ISI mark . All the material used in the construction are approved Brand /reputed Brand as per agreement condition.

Supplying and fixing of curved type High Pressure Laminate Urinal Partition with 3 feet height of with necessary C.I .clamps ,screws etc all complete and as directed by the departmental officers.

Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm necessary clamps ,screws etc all complete and as directed by the departmental officers.

Supplying and fixing of 3 Nos. of 200 amps, 500 volts grade PORCELAIN FUSE UNIT EB.Pole. complete in all respects complying with relevant standard specifications and as directed by the Departmental officers

Supplying and fixing of 3 Nos. of 40 A 4P ISOLATOR . complete in all respects complying with relevant standard specifications and as directed by the Departmental officers

Refilling the Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher etc., including conveyance, all incidental charges, complete as per standard specification and as directed by the Departmental Officers.

Refilling the stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. etc., including conveyance, all incidental charges, complete as per standard specification and as directed by the Departmental Officers.

Painting old wood work with one coats of approved I st class synthetic enamel ready mixed paint in addition to one coat of primer of approved quality and shade. The paint should be supplied by the contractor at his own cost. (The quality and shade of paint should be got approved by the competent authority before use on works) etc., complete in all respects, complying with relevant standard specifications.

Painting old wood work with one coats of approved I st class synthetic enamel ready mixed paint in addition to one coat of primer of approved quality and shade. The paint should be supplied by the contractor at his own cost. (The quality and shade of paint should be got approved by the competent authority before use on works) etc., complete in all respects, complying with relevant standard specifications.

General service charge for 40 Kva Ashok Leyland Genset with the filling of disstiled water, coolant oil and necessary Filters including Labour charge etc.,complete as per standard specification and as directed by the Departmental Officers.

Labour charges for cleaning the OHT such as removing of silt, algae, dead insects impurities, deposited salt at the bottom of tank etc., all including hire charges for rope, bucket, motor for pumping, conveyance, cost of bleaching powder labour charges for washing, cleaning etc. all complete as directed by the departmental officers.

Labour charges for cleaning the Sump such as removing of silt, algae, dead insects impurities, deposited salt at the bottom of sump etc., all including hire charges for rope, bucket, motor for pumping, conveyance, cost of bleaching powder labour charges for washing, cleaning etc. all complete as directed by the departmental officers.

Providing Rain water Harvesting pit by earth work of 90cm dia and 60 cm depth and filling with stone jelly 40mm size including earth work excavation filling work with the stone jelly and covering with precast RCC 1:2:4 slabs, precast well ring RCC 1:2:4 including cost of steel and fabrication of reinforcement and grills pre casting moulding, curing finishing and placed in position and auguring 300mm dia bore pit to a depth of 4.40m and filling the entire depth of bore pit using river sand 15% 20mm H.B Stone jelly 50% and 40mm H.B Stone jelly 35% including Supplying & fixing 1No. Gully trap with 110 mm dia PVC pipe for jointing including the cost of materials and labour charges etc all complete.

SUB TOTAL

GST @ 18%