Tamil Nadu Housing Board Tender

Supply and installation of 8TB SATA harddisk for NVR. (MAKE: Western/ Digital/ Equivalent)

Supply and installation of CAT-6 I/O socket with camera back box.

Supply and installation of 55" monitor having large format display with HDMI.

Supply and installation of 8 Port PoE switch with all the accessories. (MAKE: D-Link/ Equivalent)

Supply and installation of 24 Port patch panel (Fully loaded) with all the accessories. (MAKE: D-Link/ Equivalent)

Supply and installation of Patch cord - 1 Metre Length with all the accessories. (MAKE: D-Link/ Equivalent)

Supply and installation of 12U rack with all necessary accessories. (MAKE: D-Link/ Equivalent)

Supply, installation, testing and commissioning of enhanced unarmoured Cat 6 cable.

Supply, laying and concealing of 25mm dia PVC conduits(Heavy gauge) with necessary specials and other materials inlcuding all the accessories like clamps, saddles, pull boxes for CCTV wiring etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Supplying, laying, joining, cutting and fixing of 65mm dia GI Pipe of class-B with necessary specials etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Cleaning of OHT with bleaching powder and brushes thoroughly scrapping two times inside the wall alround including bailing out dirty water and cleaning the sump two times with clear water including cost of brush , bleaching powder hire charges for ropes , bucket and ladder etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Cleaning of sump with bleaching powder and brushes thoroughly scrapping two times inside the wall alround including bailing out dirty water and cleaning the sump two times with clear water including cost of brush , bleaching powder hire charges for ropes , bucket and ladder etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Provindg UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60 mm x 55 mm with an outer wall thicness of 2.4 mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25 mm steel reinforcement with a thickness of 1 mm to havbe dimensional stability. The sash should be of 60 x 102 mm. The mullon should be 60 x 74 mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforced chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Brick work in CM 1:4 using Stock bricks of size 9"x4-3/8"x2-3/4"

Plastering with cement mortar 1:5 ( One of cement and five of sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer

Painting the old walls two coats with best approved quality weather shield exterior emulsion paint over one coat of primer including cost of brushes, emulsion paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use).

Replacing the Not working Ceiling Fan with 48" Ceiling Fan 5 star Rated (without regulator) HIGHER END

SUB TOTAL

GST @ 18%