Tamil Nadu Housing Board Tender

Painting old iron work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers.

Removing the following broken electrical materials and refixing the following materials of good quality Anchor make Dyna white with the ISI mark inlcuidng connection , testing and commissioning etc. all complete and as directed by departmental officers.

Supplying and fixing of 20W 4feet LED tubelight of reputed make including cost of LED fittings,LED tube and labour charges for fixing etc., all complete and as directed by he departmental officers

Removing and refixing of stepped electronic square type fan regulator

6Amps switch 1no (Combined set)

Removing and refixing the unworkable 6Amps switch 4nos & 1no of socket only (Combined set)

Supplying and fixing of 40 Amps 30 MA ELCB (Legrand/(MDS)/Hager (L&T) four pole of best and approved make including cost of materials and labour charges for fixing and of old materials etc., all complete and as directed by departmental officers.

Removing and refixing New 16Amps switch with universal socket and indicator (Combined set)

AC Metal Clad 20 Amps socket with MCB for AC unit

Removing and refixing the unworkable 6Amps switch 2nos (Combined set)

Removing and refixing of 16Amps switch with indicator (Combined set)

Run off mains 4 wires of 4 Sqm.mm copper insulated single core multi strand fire retardent 1.1KV grade copper cable with ISI Mark conforming to IS 694/1990 continous earth by means of 2.5SQ.mm copper PVC insulated unsheathed single core multi starnd fire retardant 1.1KV grade copper cable with ISI Mark conforming to IS 694/1990 in fully concealed 19mm/20mm dia rigid PVC connduit pipe heavy duty complete and as directed by the departmental officers

Supplying and fixing of 9" - 225 mm Exhaust fan of approved make including cost of material and labour charges for fixing etc all complete and as directed by the departmental officers

Removing and refixing New 6Amps switch-1 No, socket -1 No with indicator (Combined)

Removing the corroded unworkable CP fittings from its position and refixing new metro brand CP fitting with CP flange of best approved quality (Metro brand) including cost of scrap value of old materials labour charges for removing and refixing etc. all complete and as directed by the departmental officers.

CP long body - Bib cock with omega handle 15mm dia with CP flange (Metro brand)

EWC PVC Seat double flapped Cover (Parryware)

Health faucet with 1.50m tube connection

CP waste coupling (Metro brand)

PVC Connection hose

PVC waste pipe

PVC FLUSHING TANK 10LITRES CAPACITY

Wash Basin (Parry ware)

CP angle cock (Metro brand)

Removing and refixing the Cast iron floor trap in stainless steel Grating

CP Towel rail

CP Pilller cock with CP flange(Metro brand)

ALUMINIUM BRACKET

Plaining door frames and shutters for making good movement of shutter for closing and opening position by engaging carpenter including cost of hire charges for plaining materials and labour charges etc. all complete and as directed by the departmental officers.

Supply and fixing of Brass Heavy duty door stopper (The brand shall be got approved by the EE & Ad.O before supply)

Supply and fixing of Door Catcher (The brand shall be got approved by the EE & Ad.O before supply)

Labour charges for Dismantling the damaged plastering in the walls and packing the joints with cement morter mixed with bonding agent and finished the surface with good cement neatly etc all complete and as directed by the departmental officer

Servicing the existing PVC door of replacing the aldrops-1nos,Al.butt hinges,PVC synthetic solution for refixing the PVC door portion etc including cost of materials and labour charges for removing and refixing etc. all complete and as directed by the departmental officers

Providing additional19mm thick BWR grade plywood plank for ward robe cupboard with lipping alround painting the same with two coats of synthetic enamel paint over one coat primer of best approved quality including cost of all materials ,labour for fixing,painting etc., complete with standard specification and as directed by the departmental officers.

Removing the damaged unworkable entrance door lock from its position and refixing new mortise lock, brass Décor type 6 levers lock with keys etc. all complete (The brand shall be got approved by the EE & Ad.O before supply)

Brick work in cm 1:5 using 2B categroy stock bricks of size 9"x4-3/8"x2 3/4" for 10 Cum including cost of bricks,labour charges, curing etc., all complete and as directed by departmental officers

Providng cupboard with Teak Wood scantlings of size 3" x 1 1/2" alround and for both verticals and horizontal,water proof 19mm thick BWR plywood for door panels using necessary furniture fitting as required and finishing the both sides lamination sheet including cost of labour ,materials etc., complete with standard specification and as directed by the departmental officers.

Providng box type cupboard using water proof 19mm thick BWR plywood for making partiton and cupboard selves and finishing the both sides lamination sheet including cost of labour,furniture fittings,materials etc., complete with standard specification and as directed by the departmental officers.

Solid Panel PVC door without frame shutter of size (1X0.66X2.05m) using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.etc. complete and as directed by the departmental officers.The materials should be got approved by the EE&ADO before use

plastering the New wall and Floor Finishing with cement mortor 1:5, 12 mm thick using the river sand including curing and finising neatly complying with standard specification and as directed by the departmental officers.

Supplying and fixing of Fiber Netlon of best and approved quality to windows and openings including cost of netlon, Velcro and nails and lobour charges for stitching & fixing etc. all complete and as directed by departmental officers.

Supplying and Fixing of Teak wood reeper of size 50mm x 25mm to withstand the Netlon in the existing Aluminium windows alround including the cost of teak wood reeper and labour for fixing in the position complete.and as directed by the departmental officer

Pre-Painted Galvanized Iron Two Track Sliding Window:Providing and fixing pre-painted two track, two panel slidingsystem fabricated from roll formed sections made ofgalvanized steel powder coated (Base steel as per IS 513 'D'quality, galvanized as per IS 277 with zinc of 120 grams /sqm.) with total coated thickness of 0.58mm.Paint specification: Coated sections should be with primercoat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coatedwith alkyd backer of 5-7 microns.Dimensions of sections: Section for frame two track shouldbe of 59mm x 44mm, section for shutter should be of 35mmx 49mm for window, section for euro groove should be of25mm x 24mm and for lap strip should be 30mm x 41mm.Fixing details: The frame and shutter sections should be cutto length, joined with corner brackets made of glass fillednylon. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass.Accessories: Corner brackets made of glass filled nylongasket made of Ethyl Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows.Single wheel rollers for windows should be provided.Glass: Glass shutter and fixed glass portion should beprovided with a glass of 4mm pinhead glass.Window frame should be fixed to brick / concrete masonry byusing nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.

Sub Total

GST at 18%