Tamil Nadu Housing Board Tender

Supply, and fixing in position of Fire fighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.(Make;OMEX/KARTAR/LIFE GUARD/SAFE GUARD/EQUIVALENT.

Supply, and fixing in position of Fire fighting application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.(Make;OMEX/KARTAR/LIFE GUARD/SAFE GUARD/EQUIVALENT

Supply of Fire fighting application M.S. Hose Box Cabinet to keep two number of Hoses and one number of branch pipe with nozzle. having proper glass window type double door with universe open key, painted inside white and outside PO red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers.(Make;OMEX/KARTAR/LIFE GUARD/SAFE GUARD/EQUIVALENT.

Supply, erection, testing and commissioning of MS ‘C’ Class heavy duty pipe as per IS 1239, to withstand a developing pressure of 10 kg/Sq.cm including necessary fittings like MS flange of table ‘E’, Elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding. Including one coat metal primer and two coat P.O red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make;JINDAL/EQUIVALENT.

150mm NB Heavy grade

100 mm NB Heavy grade

80 mm NB Heavy grade

65 mm NB Heavy grade

50 mm NB Heavy grade

40 mm NB Heavy grade

25mm NB Heavy grade

Wrapping and coating anti-corrosive treatment for under ground MS pipe having one coat of anti-corrosive metal primer, one layer of Asphalt Tar tape wound over the M.S Pipe as per standard methods as per standard specification as directed by the departmental officers.

150/100 mm dia pipe

Supply, erection, testing and commissioning of following sizes heavy duty foot valve including all accesories such as MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 150/100/80 mm dia suction pipeline at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers.Make:NORMEX/KARTAR

150mm dia

100mm dia

80mm dia

Supply, erection, testing and commissioning of cast iron body and bronge internal non-raising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table "E" gaskets,bolts and nuts including conveyance ,all incidentqal charges,necessary scoffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers.Make:NORMEX/KARTAR/equivalent

150 mm dia

100 mm dia

80 mm dia

65 mm dia

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 . including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers.

150mm dia

100mm dia

50mm dia

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.

Supply and providing 1000 Litres capacity priming tank made up of PVC. Make:SINTEX/EQUIVALENT

Supply and laying of following sizes of armoured Aluminium/Copper cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.

3 core 95 sqmm armoured Aluminium cable for Main Pump

4 Core 16 sqmm armoured Aluminium cable for jockey pump

Supply, erection, testing and commissioning of Earthing arrangements with GI Earth Plate of size 50 X 6 mm including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

2 Core 2.5 sqmm armoured Copper cable for instruments

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14kg range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers.Make: H- GURU / ISI MAKE / EQUIVALENT.

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line indfos or Donfos including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start & auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the departmental officers. Make: DONFOSS/ INDFOSS / ISI MAKE / EQUIVALENT.

Supply and Erection of Motor control centre with suitable incoming MCCB Floor mounted with mechanical inter locking facility, suitable for diesel driven fire fighting pumpset, electrical driven fire fighting pumpset and Jockey pumpset with necessary MCCB's, contactors, suitable for star Delta starting mechanism and also potential free contacts shall be provided. The detailed specification is as under 120HP STAR/DELTA STARTER MAIN PUMP,Panel Floor Mounting Type with Powder Coating Base Channel,Incomer: 250A/TPN FSU with HRC Fuse Links, AC Voltmeter (0-500V),AC Ammeter (250/5A),Voltmeter Selector Switch,Ammeter Slector Switch,CT's (250/5A),CT Wiring,95A/3P Power Contactor with 230Vac,80A/3P Power Contactor with 230Vac,OLR (66-110)A, Star Delta Timer,Indication Lamps,Push Button,Auto Manual Selector Switch,Add on Block,Control MCB 6A/2P,Control MCB 6A/3P,Auxiliary Contactor,Terminal Block,Single Phase Preventer, Control and Power Wiring,Wiring Accessories, 12.5HP DOL STARTER JOCKEY PUMP ,63A/TPN FSU with HRC Fuse Links,32A/3P Power Contactor with 230Vac,Add on Block,Auxiliary Contactor,OLR (14-23)A,Control MCB 6A/2P,Indication Lamps,On delay Timer,Push Button,Auto Manual Selector Switch,Control and Power Wiring,Terminal Block,Wiring Accessories etc., complete as per standard specification and as directed by the Engineer In Charge .

Supply, erection, testing & commissioning of electrical motor driven main pump of horizontal end suction type with gland packing and capable to deliver 180LPM 7.5kw /10HP at 70MWC. The pump set shall be coupled to TEFC motor of suitable HP & speed and complete set shall mounted on common base frame including conveying, , fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIRLOSKAR / EQUIVALENT.

Supply erection testing and commissioning of Electric motor driven fire pumpset suitable for automatic operation and consisting of following: (a) 1 No. Horizontal End-suction top discharge centrifugal type fire pump capable of delivering 2280 LPM against a total head of 70 mtrs so as to ensure a minimum presure of 3.5 Kg per sq cm at the farthest top most hydtrant /Outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like Impeller, shaft sleeve, bearing ring etc of non corrosive metal either like Bronze, brass or Gun metal and shaft of stainless steel. (b) 1 No. Squirrel cage induction motor of 60HP, 415 Volt, 3 phase 50 Hz rating, conforming to IS:325-1978 with class "F" insulation, totally enclosed, IP 55 for enclosure fan cooled type conforming to relevant protection clause of IS 4691, synchronous speed of 2900 rpm, (c) Common bed plate fabricated with MS Channel/Cast iron type for assembling the pump and motor flexible coupling between the pump and the motor with coupling guard for protection - 1 no (d) Making cement concrete foundation suitable for the above pumpset including vibration isolation pads as necessary, foundation bolts, brackets, clamp fixtures, grouting etc in accordance with the manufacturer's design and as per standard methods and as directed by the department officers.

Supply, erection, testing and commissioning of Fire Fighting 2 Way Fire Brigade Inlet with necessary gun metal 63mm dia non-return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: KIARTAR / OMEX / EQUIVALENT)

Supply, erection, testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, as directed by the department officers. Make : Kartar / Equivalent

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) 6 kgs capacity Fire Extinguisher as per New IS No. 15683, complete with Pressure gauge, discharge hose and control nozzle wall mounting bracket, safety clip etc., including conveyance ,all incidential charges , neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: EXCELLENT / SAFETY FIRST / EQUIVALENT)

Supply and Fixing of water stored Corban-Di-Oxide gas Type-2 Kg capacity Fire Extinguisher as per New IS No. 15683, complete with control valve, discharge hose with horn ,wall mounting bracket, safety clip etc., including conveyance ,all incidential charges , neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: EXCELLENT / SAFETY FIRST / EQUIVALENT)

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Office

Supply, Installation, testing and commissioning of Micro processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230/24 volt SMPS unit, 2 Nos of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental officers.

Supply, Installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)

Supply, Installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamp and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)

Supply and laying of FRLS PVC Insulated 2 core 1.5 sq.mm Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamp and etc., as per standard methods and as directed by the Departmental Officers.

Supply, Installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS Junction box / false ceiling using gixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Supply & installtion of 80 Alarm Contorl Valve with all arrnagemetns etc.,as per standard methods and as directed by the Departmental Officers.

Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.

100mm dia

80 mm dia

50mm dia

40 mm dia

Supply and kept in position of 9 Litres capacity Fire Buckets of 4Nos with Bucket stand as per standard specifications and as directed by the Departmental Officers

Sub Total- I

Sub Total -II

GST @ 12%

GST @ 18%