Back
  1. Home/
  2. Indian Tenders/
  3. Tamil Nadu Tenders/
  4. Tamil Nadu Housing Board/
  5. Overview

Tamil Nadu Housing Board Tender

Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.

Tamil Nadu Housing Board - TNHB Tender

Works
Civil And Construction
Building Construction
Eprocure
Chennai, Tamil Nadu
Opening Date18 Oct 2024
Closing Date15 Nov 2024
Tender Amount₹ 46,89,02,335 
Notes
Download

Costs

Summary

Combined Development Work For Construction Of Commercial Complex Office Multistoried Building 2b Plus G

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Request Call Back

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
2 to 3m

85.02

-

-

... More
3 to 4m

72.27

-

-

... More
Providing pile foundation 500mm dia for a depth of 5.0 m including Metal Sand Lime Mix 1:4:8, using 20mm Broken Stone jally etc. all complete, excluding reinforcement. 500mm dia Metal sand lime pile

140

-

-

... More
Metal Sand Lime Mix 1:4:8 ( One of Lime, four of sand and Eight of 20mm hard broken stone jelly) for foundation and flooring using 20 mm size hard broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., Metal Sand Lime Filling

26.19

-

-

... More
Cement concrete 1:4:8 (One of cement, five of sand and ten of hard broken stone jelly) for foundation and flooring using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

97.66

-

-

... More
Reinforced Cement Concrete with M30 deign mix for all reinforced cement concrete works, namely plinth beams, columns, tie beams, column footings, slab, etc. using 20mm gauge hard broken stone jelly excluding the cost of reinforcement grills, fabrication charges, shuttering and centering but including vibrating, laying, curing, with relevant standard specifications & as directed by the departmental officers.

469.2

-

-

... More
Providing Form work for soffits of reinforced cement concreteworks such as column footings, plinth beams,grade beams,bed block, columns and slabs or plain surfaces ,Staircase steps etc In Foundation and Basement which require normal struting using M.S.sheets of size 90x60 cm,BG 10 gauge of stiffened and welded with M.S.angles of size 25mmx25mmx3mm for boarding laid over country wood joists and supported by casurina props of 10 cm to 13 cm dia spaced at 75 cm centre to centre at suitable intervals and removing the same after a specified period, without damaging the RCC works complying with standard specifications and as directed.

2325.87

-

-

... More
Providing Form work for soffits of reinforced cement concrete works for plain surfaces such as Floor slabs, roof slabs, lintels beams , Staircase waist,landinglslabs,canopy, columns of all shapes and other similar works in all floors using M.S.sheets of size 90x60 cm,BG 10 gauge of stiffened and welded with M.S.angles of size 25mmx25mmx3mm for boarding laid over country wood joists and strutting up to 3.00M height supported by casurina props of 10 cm to 13 cm dia spaced at 75 cm centre to centre at suitable intervals and removing the same after a specified period, without damaging the RCC works in all floors complying with standard specifications and as directed.

-

-

-

... More
Providing form work for R.C.C Column, slab beam etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

965.23

-

-

... More
Providing form work for VERTICAL WALL including cost of labour charges, materials and etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers.

191.25

-

-

... More
Plastering in C.M 1:3 (one of cement and three of sand) 12mm thick mixed with water proof compound 2 kg per 10 sqm including scaffolding, curing ,finishing etc all complete in all respects complying with relevant standard specification and as directed by the departmental officers.

1477.18

-

-

... More
UGT/OHT (inside) waterproofing with Antimicrobial Coating Waterproofing: Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface of the UGT/OHT tank applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break 120% as per ASTM D 412, Tensile strength 1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, 1.5 Mpa as per EN 1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having antialgae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification.

461

-

-

... More
Supplying ,fabricating and placeing in position of Mild steel/Ribbed Tor steel grills for reinforcement for all RCC works in all floors including the cost of binding wire, bending, tying, etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

68.76

-

-

... More
Supplying and Fixing of SFRC manhole cover for size 600x600mm heavy duty including cost of labour charge,etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

18

-

-

... More
Supplying and Fixing of PVC mould CI Steps for Sump complete in all respects complying with relevant standard specification and as directed by the departmental officers.

134

-

-

... More
External Water supply Supplying and delivering of 2HP 3 phase Sub-mercible pump set suitable for collection well of best approved quality

7

-

-

... More
Supply and fixing of 3 phase panel board DOL starter with two level guard,auto start,labour charges etc.,all complete

6

-

-

... More
Supplying and laying of PVC Insulated 3 core flat type 4 sqmm copper cable confirming IS694/90 with ISI mark for three phase submercible pumpset including hire charges for laying cable below ground level including earthwork,refillin,cost of materials etc.,

540

-

-

... More
Supplying and laying of 65mm dia HDPE pipe for submercible of 10kg/cm2 including laying,cutting,jointing etc.,

630

-

-

... More
Nylon rope of good auality tying the motor in proper way and as directed by the departmental officers.

90

-

-

... More
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.as directed by the departmental officers.Above 3 HP upto 7.55 HP

6

-

-

... More
Water Supply Arrangements Supply and delivery of best quality of suitable 7.5HP submersible pumpset as per ISI specification with ISI mark hydraullically testing and commissioning of submersible wet type suitable for sump with pressure gauge and necessary length of 2 nos of PP from pumpset to the top of the sump and other required accessories etc complete in all respect and as directed by the departmental officers . The motor and the pumpset supplied should satisfied the following duty conditions.

1

-

-

... More
THREE PHASE PANEL BOARD STAR- DELTA WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately).

1

-

-

... More
ERECTION OF POWER PUMPSET IN BORE/OPENWELL : Labour charges for the erection of submerisible pump set including fixing and jointing submersibile cable with proper MS clamp upto the starter to the depth and also fixing of riser pipe to the required depth valve errection. Clamp pressure gauge upto the extension wall of pumproom and erection of panel board consiting of TPICN switches, starter, Voltometer, Ammeter, Three phase indicating lamps capacitor, Single phase, water level gauge and laying jointing the cable and earthing as per IE rules etc. complete and testing the pumpset and trail run for 10 days as directed by the departmental officers.

1

-

-

... More
Supplying, laying and fixing ASTM-D Schedule-40 Threaded PVC Pipe with necessary PVC Specials

-

-

-

... More
110 mm dia PVC pipe

70

-

-

... More
50 mm dia PVC pipe

180

-

-

... More
Supplying, Laying, fixing and jointing the following specials for plumbing by threading 65mm Gun Metal gate valve

4

-

-

... More
Supplying and delivery of Submersible XLPE Insulated CONFORMING TO IS 694/1990 and Sheathered 3 Core Flat Type 4.0 Sqmm cable

60

-

-

... More
AMR water flow meter (Screw end -Class B) of 40mm dia for metro water dedicated main with labour charges and required UPVC specials (NRV, Coupling, Solution etc.,) to join main line & Sump

1

-

-

... More
Supply for Domestic Water & FF Water Filling to OHT ( Domestic -120m3 OHT & FF 42m3 OHT x 1no.) :Supply, Installation, Testing, Commissioning and handing over of KSB / Equal make 2Nos. (1 Nos. Working & 1 No. stand-by) Inline Vertical multistage pump with Pump Base & Head in SS 304 constructions , impeller , intermediate chamber and shaft in SS304 . IP 42 Indoor Type control panel with all necessary power contactors , OLR , Single Phase Preventor, pressure gauges, 1no, non return valve per Pump and 2 nos isolation valves per pump on discharge side as per the duty conditions hereunder.The System offered should conform to the components specifications described below : For Pumping water for Domestic needs for Commercial Building. Total System Capacity - 30m3/hr @ 70m Head (Each pump Capacity 30 m3/hr @ 70 m Head. ( No. of Pumps 2 (1 w+1s) Specifications of Component : Pumps : Pumps shall be Inline Vertical Multistage centrifugal with Pump Base & Head in Cast Iron , impeller , Stage Casing in SS 304 and shaft in SS . The pump shall be fitted with mechanical seal.2 No.s (1 Working + 1 Standby) Motor: The pumps shall be fitted with TEFC Squirrel Cage Motor operating on 415 V, 3 Phase, 50 Hz, Power Supply. The motor shall have IP 54 / IP 55 Degree of Protection with Efficiency class will be IE3. CPVC Suction Discharge & Manifold : Pumps shall be fitted with CPVC suction and discharge manifold. The manifolds shall be furnished with flanged / threaded end connections for carrying out pipe connections at site. 1 no Butterfly Valve / Ball Valve of PN 10 rating shall be supplied per Pump and fitted on suction and discharge lines of each of the pumps. 1 No. CI / Brass type check valve shall be fitted at the discharge lines of each of the pumps. 1 No. Pressure Gauge 100mm to be fitted on the Discharge Side. Control Panels ( ON / OFF - Fully Automatic Control Panel) Indoor Type • Automatic changeover in event of motor fault and as a function of operating hours. • Input terminal for all dry running protection types. • Control Panel with lockable master incoming isolation switch for repair safety. Automatic changeover at any start / stop cycle.All necessary protection like , Single Phase Preventor , Over Load Relay for over and under voltage protection.All Power contactor with MCB Dry running protection by means of pressure switch or level switch On/ Off Push Buttons. On/ Off and Trip Indication lights in the panel.The control panel shall house a main disconnect switch into which the power supply will be terminated by the Electrical Contractor. All power and control wiring for the power contactors and control relays as also to the motors shall be wired and shipped

1

-

-

... More
Supply for Flushing Water Filling to OHT ( 162m3 OHT x 1no.) :Supply, Installation, Testing, Commissioning and handing over of KSB / Equal make 2Nos. (1 Nos. Working & 1 No. stand-by) Inline Vertical multistage pump with Pump Base & Head in SS 304 constructions , impeller , intermediate chamber and shaft in SS304 . IP 42 Indoor Type control panel with all necessary power contactors , OLR , Single Phase Preventor, pressure gauges, 1no, non return valve per Pump and 2 nos isolation valves per pump on discharge side as per the duty conditions hereunder.The System offered should conform to the components specifications described below Pumping water for Flushing needs for Commercial Building. Total System Capacity - 40m3/hr @ 70m Head (Each pump Capacity 40 m3/hr @ 70 m Head. ( No. of Pumps 2 (1 w+1s) Specifications of Component :Pumps : Pumps shall be Inline Vertical Multistage centrifugal with Pump Base & Head in Cast Iron , impeller , Stage Casing in SS 304 and shaft in SS . The pump shall be fitted with mechanical seal.2 No.s (1 Working + 1 Standby) Motor : The pumps shall be fitted with TEFC Squirrel Cage Motor operating on 415 V, 3 Phase, 50 Hz, Power Supply. The motor shall have IP 54 / IP 55 Degree of Protection with Efficiency class will be IE3. CPVC Suction Discharge & Manifold : Pumps shall be fitted with CPVC suction and discharge manifold. The manifolds shall be furnished with flanged / threaded end connections for carrying out pipe connections at site. 1 no Butterfly Valve / Ball Valve of PN 10 rating shall be supplied per Pump and fitted on suction and discharge lines of each of the pumps. 1 No. CI / Brass type check valve shall be fitted at the discharge lines of each of the pumps. 1 No. Pressure Gauge 100mm to be fitted on the Discharge Side. Control Panels ( ON / OFF - Fully Automatic Control Panel) Indoor Type: • Automatic changeover in event of motor fault and as a function of operating hours. • Input terminal for all dry running protection types. • Control Panel with lockable master incoming isolation switch for repair safety. Automatic changeover at any start / stop cycle.All necessary protection like , Single Phase Preventor , Over Load Relay for over and under voltage protection.All Power contactor with MCB Dry running protection by means of pressure switch or level switch On/ Off Push Buttons. On/ Off and Trip Indication lights in the panel. The control panel shall house a main disconnect switch into which the power supply will be terminated by the Electrical Contractor. All power and control wiring for the power contactors and control relays as also to the motors shall be wired and shipped .

1

-

-

... More
Supply for Rain Water Supply for Filling the OHT ( 42m3 OHT x 1no.) :Supply, Installation, Testing, Commissioning and handing over of KSB / Equal make 2Nos. (1 Nos. Working & 1 No. stand-by) Inline Vertical multistage pump with Pump Base & Head in SS 304 constructions , impeller , intermediate chamber and shaft in SS304 . IP 42 Indoor Type control panel with all necessary power contactors , OLR , Single Phase Preventor, pressure gauges, 1no, non return valve per Pump and 2 nos isolation valves per pump on discharge side as per the duty conditions hereunder. The System offered should conform to the components specifications described below :For Pumping water for Flushing needs for Commercial Building.Total System Capacity - 10m3/hr @ 70m Head (Each pump Capacity 10 m3/hr @ 70 m Head. ( No. of Pumps 2 (1 w +1 s) Specifications of Component : Pumps: Pumps shall be Inline Vertical Multistage centrifugal with Pump Base & Head in Cast Iron , impeller , Stage Casing in SS 304 and shaft in SS . The pump shall be fitted with mechanical seal.2 No.s (1 Working + 1 Standby) Motor : The pumps shall be fitted with TEFC Squirrel Cage Motor operating on 415 V, 3 Phase, 50 Hz, Power Supply. The motor shall have IP 54 / IP 55 Degree of Protection with Efficiency class will be IE3 CPVC Suction Discharge & Manifold : Pumps shall be fitted with CPVC suction and discharge manifold. The manifolds shall be furnished with flanged / threaded end connections for carrying out pipe connections at site. 1 no Butterfly Valve / Ball Valve of PN 10 rating shall be supplied per Pump and fitted on suction and discharge lines of each of the pumps. 1 No. CI / Brass type check valve shall be fitted at the discharge lines of each of the pumps. 1 No. Pressure Gauge 100mm to be fitted on the Discharge Side. Control Panels ( ON / OFF - Fully Automatic Control Panel) Indoor Type: • Automatic changeover in event of motor fault and as a function of operating hours. • Input terminal for all dry running protection types. • Control Panel with lockable master incoming isolation switch for repair safety. Automatic changeover at any start / stop cycle All necessary protection like , Single Phase Preventor , Over Load Relay for over and under voltage protection All Power contactor with MCB Dry running protection by means of pressure switch or level switch On/ Off Push Buttons. On/ Off and Trip Indication lights in the panel.The control panel shall house a main disconnect switch into which the power supply will be terminated by the Electrical Contractor. All power and control wiring for the power contactors and control relays as also to the motors shall be wired and shipped .

1

-

-

... More
Mechanical Ventilation JET IMPULSE FAN: (Make; Air Flow) Supply of Jet Fan. Fan shall be provided with Dual Speed smoke spill motor with high temperature motor for smoke extraction. Motor shall be suitable for operation on 415±10% volts, 50Hz, 3 phase AC power supply and capable to withstand 300°C deg C temperature for a minimum duration of 2 hours. The Impeller shall be Airfoil design with High efficiency blades. Fans shall be supplied with silencer on both sides of the fan for Quite operation. Axial Fan used in Jet Fan shall be AMCA Certified for Air and Sound Performance. The fan shall be CE/UL Certified for smoke control and exhaust applications. The motor make of smoke/exhaust fan shall be same as mentioned on the fire certificate of the fan. Cost of CFD analysis shall be quoted & shown separately. Duty : Normal & Smoke exhaust. Jet fan diameter of 400 mm with Max Air Volume shall be ( 2729/5458 CFM)

70

-

-

... More
FRESH AIR SUPPLY AXIAL FLOW FAN: (Make; Air Flow) Supply, installation, testing and commissioning of ceiling mounted Tube Axial Flow Fans with adjustable pitch blade, MS / GI long casing ( 2 mm thick upto 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia ), cast aluminum alloy impeller complete with TEFC Sq. Cage Induction Motor suitable for 415 Volts ± 10%, 50 HZ ± 3%, three phase A.C. supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep ( Inlet & Outlet as required ), bird screen ( Inlet & Outlet as required ) etc., of following capacity. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity.Fan static pressure shall be as indicated but actual fan static pressure to be checked by contractor. Fan total efficiency should not be less than 70 %, noise level should not be more than 80 dbA @ 3 m distance for normal operation fans when measured in hemispherical reverberant room conditions. Sound attenuators of appropriate length shall be included in the cost to achieve the desired result. Axial Fan shall be AMCA Certified for Air Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted.Fan Max Air Volume : 28500 CFM @ 20mm SP

8

-

-

... More
EMERGENCY SMOKE EXHAUST AIR AXIAL FLOW FANS ( FIRE MODE) (Make; Air Flow) Supply, installation, testing and commissioning of ceiling mounted Tube/Vane Axial Flow Fans with adjustable pitch blade, MS / GI long casing ( 2 mm thick upto 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia ), cast aluminum alloy impeller complete with TEFC Sq. Cage Induction Motor suitable for 415 Volts ± 10%, 50 HZ ± 3%, three phase A.C. supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep ( Inlet & Outlet as required ), bird screen ( Inlet & Outlet as required ) etc., of following capacity. The complete fan along with motor shall be suitable for 300 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection. Fan static pressure shall be as indicated but actual fan static pressure to be checked by contractor. Fan total efficiency should not be less than 70 %, noise level should not be more than 85 dbA @ 3 m distance for emergency operation fans when measured in hemispherical reverberant room conditions.. Sound attenuators of appropriate length shall be included in the cost to achieve the desired result. Axial Fan shall be AMCA Certified for Air Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with “Power Ventilators for Smoke Control Systems” or shall be EN 12101-3 & CE certified for high temperature for 300 °C for 2 hours.Fan Max Air Volume : 57500 CFM @ 20mm SP

8

-

-

... More
CO GAS DETECTOR Supply, Installation & Commissioning of CO Gas Detector.

28

-

-

... More
Compound wall: Providing pile foundation 300mm dia augur pile for a depth to 4.5m depth including C.C- 2.4m. 1:2:4, using 20mm Hard Broken Stone jelly etc. all complete, excluding reinforcement etc complete complying with standard specification and as directed by the departmental officers

290

-

-

... More
Supplying and filling in foundation and basement with filling stone dust in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand and as directed by the Departmental officers..

118.66

-

-

... More
Providing and laying in position , standardised concrete mix M30 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recomended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about(5.0 cum) 7730 KG OF 20mm machine crushed stone jelly with about (3.3 CUM) 5156 kg of 10 -12mm machine crushed stone jelly with about(4.79 CUM) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering including laying,manufctured in fully automatic batching plant and transported to site of work in transit mixer for all leads, vibrating with mechanical vibrators , finishing, curing, etc., and providing fixtures like fan clamps in the RCC Floor / RCC slabs wherever necessary without claiming extra etc, complete complying with standard specification and as directed by the department officers. the coarse and fine aggregates to be used should comply with the requirements of IS standards (No seperate payment will be made by the department for the excess usage of materials)

-

-

-

... More
Foundation & Basement

35.43

-

-

... More
Ground Floor

15.52

-

-

... More
Providing form work IN SMALL QUANTITY etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers..

157.17

-

-

... More
Fly Ash Brick work in cement mortar 1:5 ( One of cement and six of sand) using chamber burnt Second class ground moulded stock bricks of size 9"x 4 3/8"x 2 3/4" having minimum average crushing strength of 50Kg/sqcm for super structure in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers

66.79

-

-

... More
Fly Ash Brick work for 115mm partition wall in cement mortar 1:5 ( One of cement and five of M-sand) using class II ground moulded stock bricks of size 9"x 4 1/2"x 3" having minimum average crushing strength of 50Kg/sqcm for super structure in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers

142.56

-

-

... More
Plastering with Cement Mortar 1:5 ( One of cement and five of sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer.

1231.23

-

-

... More
Painting the Wall with Texture Finish Paint Including one coat of primer, two coats weather shield emulsion paint and Labour Charges etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the Executive Engineer before use).

541.3

-

-

... More
Supplying and fixing Mild Steel grill Gate as per the approved design including one coat of primer and labour for fixing in position etc. all complete. In all floors.

2417.7

-

-

... More
Painting new iron work with two coats of approved I st class synthetic ready mixed enamel paint of approved quality, brand and shade over the existing priming coat. The paint should be supplied by the contractor at his own cost. (The quality and shade of the paint should be got approved from the Executive Engineer before use on works) etc. all complete complying with relevant standard specifications.

99.66

-

-

... More
Supplying and fixing of 32watts LED decorative gate light fitting complete with suitable length 32mm dia GI pipe Class B on the existing gate piller with supply and fixing of M.S box of 30cm x 20cm x 10cm with angle iron frame work with door and lock key arrangeent with supply and fixing 16amps fare unit 250V 5amps SP switch in side the M.S box with PVC unsheathed copper lead with 32wats retrofit CFL lamp.

4

-

-

... More
Supplying and fixing of 4 way oval up down LED outdoor waterproof IP65 exterior step light fixtue lamp etc., all complete and complying with relevant standard specification.

25

-

-

... More
Steet Lights:Supply of GI steel tubular pole for Street light of 7.50 metre length single bracket pole with base plate (250 x 250 x 6mm) with 114.30mm OD x 5.40mm thick x 4500mm length, 88.90mm OD x 4.85 mm thick x 1500mm length, 76.1mm OD x 3.25mm thick x 1500mm length and mounting it in M20 grade (Maximum W/C ratio=0.55) concrete pedestal of size 450mm x 450mm x 1000mm with 75mm thick sand filling and 75mm thick CC 1:5:10 using 40mm HB stone jelly for foundation below with two coat Aluminium Paint Over one coat red oxide all complete as directed by the departmental officers.

60

-

-

... More
Supply of 60W LED Street Light Fitting. Make: PHILIPS / HAVELLS / EQUIVALENT.

95

-

-

... More
Supply of 3Core 1.5 Sqmm Cable for Street Light Pole Inside

760

-

-

... More
Supply of GI No.8 Wire and No.6 Wire for suitable earthing for street lighting

19.57

-

-

... More
Labour and machinery charges for fixing, testing and commissioning of streetlight pole in pedestal, circuit wiring from panel board, fixing of synthetic moulded compund boxes with MCB and lighting wiring from MCB to LED light fittings and providing earthing including conveyance, all incidental charges, necessary fittings like bolt, nuts with washers & scaffolding wherever found neccessary & two coat Aluminium Paint Over one coat red oxide etc., complete as per standard specification and as directed by the Departmental Officers.

95

-

-

... More
Supply and laying of 1100 V grade 4Core X 16 Sqmm XLPE aluminium conductor armoured UG cable including all clamps,screws when taken on wall / existing cable Tray etc complete in all respects and as directed by the departmental officers.

1162.5

-

-

... More
Locks Supplying and fixing of 7 lever brass padlock. (MAKE : GODREJ / EQUIVALENT)

61

-

-

... More
Rain water HarvestingProviding Rain water Harvesting pit by earth work of 120cm dia and 300cm depth and filling with stone jelly 40mm size including earth work excavation filling work with the stone jelly and covering with precast RCC 1:2:4 slabs, precast well ring RCC 1:2:4 including cost of steel and fabrication of reinforcement and grills precasting moulding, curing finishing and placed in position and augaring 300mm dia bore pit to a depth of 4.40m and filling the entire depth of bore pit using river sand 15% 20mm H.B Stone jelly 50% and 40mm H.B Stone jelly 35% including Supplying & fixing 1No. Gully trap with 110 mm dia PVC pipe for jointing including the cost of materials and labour charges etc all complete.

18

-

-

... More
Supplying and fixing of 110mm dia PVC SWR pipe A Type for Rain water down fall pipe conforming to IS13592 with ISI mark and fittings conforming to IS 14735 , with necessary C I gratings, shoes, bends, offsets, clamps, teak wood plugs, etc., of approved quality and including fixing C.I. gratings at the junction of parapet and floor or roof slab etc., including finishing etc., complete complying with relevant standard specification and as directed by the departmental officer.

259

-

-

... More
CCTV :Supply fixing and Installation of Dahua / DH-HAC-HFW1209CP-LED 2 Megapixel HDCVI, 1-2.9’’ 25/30fps@720p, 3.6mm fixed lens, IR Leds length 20M, IP66,High Speed, Long Distance realtime transmission - Every Each Block , Indoor For Lift Coverage & Steps Entrance Coverage etc complete complying with standard specification and as directed by the departmental officers.

132

-

-

... More
Supply fixing and Installation of Dahua / DH-HAC-HFW1509CP-LED 5 Megapixel HDCVI, 1-2.9’’ 5Megapixel CMOS, 25/30fps, length 30M, IR, ICR,2.8/3.6/6/8MM Lens optional, IR Bullet IP66 - Cameras facing outside compound wall Coverage/ Main Entrance & Exit Entrance Coverage etc complete complying with standard specification and as directed by the departmental officers

20

-

-

... More
Supply fixing and Installation of Dahua / DH-XVR4B16H DVR: up to 5MP@25fps-All Chs 16CH Video, 1CH Audio, HDD 1SATA/ Alarm N/A / RS485 - DVR

12

-

-

... More
Supply and fixing of Seagate 8 TB Hard disk Video Surveillance etc complete complying with standard specifications

12

-

-

... More
Supply and fixing of Accessories :(DC pin - 1 No and BNC Connector - 2 No’s per Camera) Video Balloon etc complete complying with standard specification and as directed by the departmental officers.

304

-

-

... More
Supply and fixing SMPS (12 V,20 Amps)etc complete complying with standard specification and as directed by the departmental officers.

15

-

-

... More
Supply and Installation of Samsung 55"inch Monitor - Samsung - Monitor placed in Security Room etc complete complying with standard specification and as directed by the departmental officers.

4

-

-

... More
Supply and laying of CAT 6 Armoured cable for CCTV cameras

4060

-

-

... More
Supply and Fixing of Finolux / Sunplast Supply & Laying of CCTV Cable & PVC Conduit with Accessories etc complete complying with standard specification and as directed by the departmental officers.

4060

-

-

... More
Supplying and fixing of of 4U CCTV Rack etc complete complying with standard specifications and As directed by the departmental officers.

10

-

-

... More
Lightning Arrester Supply and installation of copper air terminal spike arrester with base and all fittings 1.50m stand

6

-

-

... More
DOWN CONDUCTOR Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection

651.2

-

-

... More
EARTH ELECTRODE Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp

10

-

-

... More
Civil Aviation Supplying and fixing of aviation obstruction light of 2Nos fitted in single arm with neon bulb and mounted on to be the left mavhine room above water rank in terrace ( which ever is higher point) with necessary photo electric sensor for automatic swtiching ON & OFF of the light depending on the outdoor light indensity, the cope incldes providing necessary mounting arrangement is support to with stand the wind pressure of 70 KMPH,wiring from the tapping point earthing including providing necessary battery backup for 10hours all complete as required as per IS 2039 and also as per other statutory and as directed by departmental officers .

1

-

-

... More
SOLAR PANEL Supply, Erection, Commissioning and testing of Solar Power Plant (125kwp) On Grid Solar PV Plant comprising of: i) Solar panels of type Mono Crystline, PERC, etc. ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables, Connectors, Junction Boxes and accessories. iii) D.C. D.B iv) A.C. D.B v) A.C. cables and accessories vi) Lightning arrestor, earthing, etc. vii) Module Metallic Mounting Structures viii) Installation, Testing and Commissioning corresponds to BIS and IEC requirements

125

-

-

... More
Fire Fighting works Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump rated for 2850 LPM at 70 metres head with Electrical Motor of 60HP of 415volt, 3 phase connection complete with base plate and accessories. (Make Kirloskar or Equivalent). The rate inclusive of neessary vibration, bed mounting, etc., as per standard specifications and as directed by the Departmental Officers

3

-

-

... More
Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of followings complete in all respects is required. a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 2850 LPM against a total head of 110 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel. b. 100 BHP, 1500 RPM water cooled with radiator,diesel engine conforming to relevant BS & IS standard complete. c. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches etc. d. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc.

1

-

-

... More
Supply, erection, testing and commissioning of 180 LPM, 70 metres Head Pressurization Pump with 10HP electrical motor of Kirloskar make with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIRLOSKAR / EQUIVALENT.

2

-

-

... More
Supply, erection, testing and commissioning of fire fighting application Monoblock Motor Pumpset of 1100 LPM at 45 metres head to develop 3.5 kg / sq.cm at the highest and farthest hydrant point to make 30m water jet at the time of fire fighting emergency cicumstances, coupled with 15 KW / 20 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast iron body, bronze impeller, rope gland packaging, suction size of 100 mm dia, delivery size of 80 mm dia, including the cost of foundaton concrete, anti-vibration mounting, rain safety hood and etc., complete as directed by the Departmental Officers (Make: Kirloskar KDS 2050+ or Equivalent)

2

-

-

... More
Control Panel Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, partmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings. A. Common Panel in Fire Pump House (i). Incomer a. 1 No. 600A TP & N SDFU with HRC fuses b. 1 set of 600A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supply c. 1 No. (0-500A) digital ammeter with selector switch & CTs d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses (ii). Outgoing a. Main Fire Pump 400 A TPN SDFU with HRC fuses with sutable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual / OFF operation - 1 No. Each 612100.00 b. Jockey Pump 125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual operation - 1 No. c. Diesel Engine Control comprising of:1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start /stop in manual mode. 2. Indication lamp for high / low lubricant oil pressure, high water temperature and engine ON indication.3. Battery charger suitable for 12V /24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter.4. All standard relays and accessories for automatic operation of diesel engine.5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers., as per the standard method and as directed by the Departmental Officers.etc

1

-

-

... More
Supplying, erection, testing and commissioning of Fire Fighting Electrical Control Panel of 10HP, 415V, 50Hz rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions.a. 50 Amps, 4 Pole MCB-Incomer, 6 Amps, 2 Pole MCB for Control Circuit-1 set b. R, Y, B Phase Indication Lamp, Voltmeter (0-500V), Ammeter (0-50A), Voltmeter Selector Switch-1set c. 32 Amps Power Contactor with 230V Coil, 14-23 Amps Over Load Relay-1 set d. Single Phase Preventer-1 No. e. Indication Lamp for Motor On/Off Push Button-1 set f. Auto / Manual Selector Switch, On / Off Push Button-1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover. The above panel mounted on wall using anchor fastners, bolts, plugs, incoming and outgoing cable connection and all works carried out as per standard specifications and as directed by the Departmental Officers.

1

-

-

... More
Water Curtain Control Panel : Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings. 400 A TPN SDFU with HRC fuses with sutable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual /OFF operation - 1 No........... The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification

1

-

-

... More
Supply and laying of following sizes of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc.. The rate inclusive of all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.

-

-

-

... More
3 Core 95 sqmm Armoured Aluminium Cable

160

-

-

... More
25 sqmm 3 core Aluminium Armoured Power Cable ; Conductor Material, Aluminium ; Colour, Black ; Overall Diameter (Strip/Wire), 21.7 mm ; Current Rating, 97 …

80

-

-

... More
10 Core 2.5 sqmm Armoured Copper Cable

20

-

-

... More
2 Core 2.5 sqmm Armored Copper Cable

18

-

-

... More
2 Core 1.5 sqmm Armored Copper Cable

80

-

-

... More
Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

2

-

-

... More
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers &joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.

-

-

-

... More
250mm nominal dia

12

-

-

... More
200mm nominal dia

12

-

-

... More
150mm nominal dia

4843

-

-

... More
100mm nominal dia

727

-

-

... More
80mm nominal dia

187

-

-

... More
65mm nominal dia

239

-

-

... More
50mm nominal dia

1719

-

-

... More
40mm nominal dia

2232

-

-

... More
32mm nominal dia

2963

-

-

... More
25mm nominal dia

5259

-

-

... More
Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to pen and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make:OMEX / KARTAR / LIFE GUARD / SAFE GUARD /EQUIVALENT.

60

-

-

... More
Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make:OMEX / KARTAR/ LIFE GUARD / SAFE GUARD /EQUIVALENT.

120

-

-

... More
Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFEGUARD / EQUIVALENT,.

60

-

-

... More
Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFEGUARD / EQUIVALENT.

60

-

-

... More
Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by theDepartmental Officers. Make: OMEX / KARTAR / LIFEGUARD / SAFE GUARD / EQUIVALENT

52

-

-

... More
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFEGUARD / EQUIVALENT.

2613

-

-

... More
Side Wall Sprinkler : Horizontal Sidewall Sprinklers are designed for use in light and ordinary hazards for standard installation. The design provides a crescent-shaped water discharge pattern for installation along a wall or side of a beam and just beneath a smooth ceiling. The temperature response type is standard response (5mm glass bulb) and quick response (3mm glass bulb). The fast response type glass bulb and the special deflector combine speed of operation and area of coverage making it an ideal choice for standard coverage applications while being aesthetically pleasing. Chrome plating gives the sprinkler a good corrosion resistance in most types of corrosive environments

40

-

-

... More
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response Upright Sprinkler type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

4539

-

-

... More
Water Curtain Nozzle : Water Curtain Nozzles are non-automatic open, outside sprinklers intended for the protection of windows, walls, steel beams, columns, roofs and any other structures against exposure fire and heat penetration. Water Curtain nozzles are generally installed with orifice slot pointing downwards direction. The curtain spray absorbs and reflects heat radiation, minimizing the amount of heat reaching the structure/area to be protected.

196

-

-

... More
Supply, Installing, testing and commissioning of Stainles Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1000mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved.

2613

-

-

... More
Addressable Fire AlarmSupply, installation, testing and commissioning of addressable Fire alarm Control panel :New Flush or Surface Mounting Modularized Panel, Maximum 10 Loops ( 8 with Network ) ,No Loops Fitted, Max Capacity with 10 Loops = 2,420 Addressable Devices, 140 Zone Indication, Big Screen, 2 Bell Circuit,Integrated PSU with Battery Charger, Excluding Batteries. LPCB Approved

3

-

-

... More
Addressable Heat Detector :Intelligent Fixed Temperature and Rate of Rise Heat Detector, 8 Bit Processor with Remote Indicator Output (Certificated by LPCB). suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

476

-

-

... More
Supply, installation, testing and commissioning of addressable Smoke Detector, Drift Compensation, Sensitivity Adjustment, 8 Bit Processor with Remote Indicator Output (Certificated by LPCB). suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel /GST/ Equivalent)

610

-

-

... More
Supply, installation, testing and commissioning of addressable Manual Call Point (MCP) Semi Flush Mounting Re-settable (Non- Breaking Glass), Supplied with Special Reset Tool - Compatible with both I & DI Series (Certified by LPCB) (Make: Ravel /GST/ Equivalent)

124

-

-

... More
Supply, installation, testing and commissioning of Addressable Combined Sounder and Strobe, Loop Powered and 24VDC, (Certificated by LPCB). (Make: Ravel /GST/ Equivalent)

124

-

-

... More
Supply, installation, testing and commissioning of Loop Isolator: Loop Isolator for IFP8, 484 Addressable Devices Capacity

116

-

-

... More
Supply, installation, testing and commissioning of Loop Card: Dual Loop card for IFP8, 484 Addressable Devices Capacity

12

-

-

... More
2 Core 1.5 sqmm Armored Copper Cable

15700

-

-

... More
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’,gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT

-

-

-

... More
250mm dia

2

-

-

... More
200mm dia

4

-

-

... More
150mm dia

18

-

-

... More
100mm dia

4

-

-

... More
Y-Strainer: 'Y' - Type Strainers High Capacity flow through out full size In-let /Out-let connection with large Flow Filteration area to minimize Pressure Drop and screen chocking problems.The cover is connected to the Body with Nuts & Studs and the filter screen is readily accessible and easily exchangeable. Make: NORMEX / KARTAR / EQUIVALENT

-

-

-

... More
200mm

4

-

-

... More
100mm

4

-

-

... More
Flow Meter is an electronic flow meter designed for retrofitting to a Automatic Control Valve to provide accurate flow measurement data. It can also be specified on a new valve to add integral flow metering functionality to an aviation fueling system. Flow Meter employs an innovative swivel mechanism that allows the meter to be inserted into tappings as small as 1/2-inch, making it an ideal means to adding metering capabilities without the need to install a separate in-line flow meter.

1

-

-

... More
water flow switch, is an electro-mechanical device designed to send a signal to a local alarm or monitored panel and/or fire department when a continuous flow of water occurs through a fire sprinkler system’s piping. This flow signifies an activated sprinkler head or a leak in the system.

17

-

-

... More
Lever Deluge Alarm Valves are used as "automatic water control valves" in deluge, pre-action, and special types of fire protection systems such as foam water and double interlock. The Valves also provide for actuation of fire alarms upon system operation.

6

-

-

... More
Providing and fixing of heavy duty C.I Butterfly Valve: IS:13039 in ring mains PN16 complete complying with standard specification and as directed by the departmental officers.

-

-

-

... More
250mm

3

-

-

... More
200mm

3

-

-

... More
150mm

22

-

-

... More
80mm

44

-

-

... More
100mm

22

-

-

... More
65mm

45

-

-

... More
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.

-

-

-

... More
200mm nominal dia

3

-

-

... More
150mm nominal dia

18

-

-

... More
100mm nominal dia

4

-

-

... More
80mm nominal dia

2

-

-

... More
Supply, erection, testing and commissioning of Ball Valve 25mm: Screwed Female Ends to IS 554 / BS 21 / ISO 7. Full Bore, Two Piece Design. Quarter Turn, Lever Operated. Provided with Stainless Steel Ball.Premium Quality PTFE Gland Packing and Seating.Test Pressure (Hydrostatic) :Shell : 25 kg/cm²g (350 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 220°C

12

-

-

... More
Supply, erection, testing and commissioning of Ball Valve 25mm: Screwed Female Ends to IS 554 / BS 21 / ISO 7. Full Bore, Two Piece Design.Quarter Turn, Lever Operated. Provided with Stainless Steel Ball. Premium Quality PTFE Gland Packing and Seating.Test Pressure (Hydrostatic) :Shell : 25 kg/cm²g (350 psig) Seat : 16 kg/cm²g (225 psig) Maximum Working Temperature : 220°C

68

-

-

... More
Fire Extinuisher Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge,discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

80

-

-

... More
Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn,wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT /SAFETY FIRST / EQUIVALENT

20

-

-

... More
Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX /EQUIVALENT.

3

-

-

... More
Supply, Installation and commissioning of FM approved Alarm Check Valve with full valve trim.the alarm check valve shall be equipped with a removable cover assembly. the alarm valve shall be listed for vertical position. T shall be equipped with gauge connections on the system side and supply side of the valve clapper. The alarm valve trim piping shall be externally galvanised. Maximum water working pressure to 250 PSI. This shall be inclusive of hydraulic powered water motor alarm by the way of integral valve alarm line trim piping water pressure retarding chamber to limit the propensity of unnecessary alarms. water motor alarm shall be equipped with a rear closure plate to limit the access of foreign materials of accumulation of debris as per specification. (Make : HD/TYCO/NEW AGE)

10

-

-

... More
Supply and fabrication and fixing of GI Puddle Flange in water tanks & wherever crossing the pipe in RCC walls with making in GI 'C' class with dip galvanizing of 6mm thick HI plate alround 3"/ 6" with proper thread on the pipes etc complete and as directed by the departmental officers.

3

-

-

... More
Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers.

2

-

-

... More
Public Addressable System Supply, erection, testing and commissioning of PA Mixer Amplifier 240W. Amplifiers shall have the following features:b. Power output: 120/240/500 W per channel at 0.05 % harmonic distortion over frequency range 40 to 20,000 Hz + 1 db.c. Frequency response 40 to 20,000 Hz + 1 dB at specified power over the entire speech and music range. d. Signal and noise level: 100 dB below rated output. e. Channel separation: 90 dB at 1 kHz. f. Output: 100V / 70 V. g. Controls and indicators such as volume control, AC power switches etc. h. Hum and noise level below rated output. All volume controls minimum 68 db. One microphone volume and master volume control maximum - 60 db.

2

-

-

... More
Supply, erection, testing and commissioning ofWall Mounted PA Speakers -6W (SOR Page no. 163, M-2152).6 Watts Wall Mounted PA Speaker Designed for Indoor Applications.Up to 30W Continuous Power.5″ Woofer.Strong/Secure Swivel Mounting Bracket.

88

-

-

... More
PA Cum Talk Back Controller Panel:Modular design, plug in type solid state  Advance Micro controller based Fire Alarm Panel.  2 to 48 zone Expandable.  16x2 character LCD Display.  Mains, A. C. Fail, fuse, Charging, Rev. Batt. Indication.  Zone wise fire, open, short LED indications.  Zone wise fire, open, short testing facility.  Trickle & fast charging facility.  Reset ,alarm cancel, Lamp test, controls etc.  Compatible with any make smoke & heat detector.  Designed as per IS: 2189  Analogue meters to measure AC supply, Battery current and DC operating voltage  Amplifier wattage can be customized depending upon requirements  Gooseneck mic attached for public announcement  Zone wise selector switch along with LED indication available  All call switch with LED indication available  Same hooter line is used for speaker also  Hooter cum speaker is used in the hooter line.  Music player attachable facility optional.  Inbuilt battery charger and battery space  Amplifier and Mic will be of Agni Suraksha/Ahuja make.  Max line length is 300 m with 1.5mm cable  Back and top both side cable entry provision is available.

2

-

-

... More
2 core 2.5 sq.mm. armoured copper cable

5675

-

-

... More
Supply, installation, testing and commissioning of Talk Back Unit:The Addressable Talkback Speaker System plays a vital role in facilitating communication during fire emergencies in multi-story buildings. Its primary function is to establish a communication link between building occupants and the rescue support team stationed in the control room.

88

-

-

... More
Signages Supply, installation, testing and commissioning of (MCP).Auto Glow Sign Size: 16"x 6" Sign made in 5mm PVC Foam Board with Self Luminous Film on both side Chains Hooke and Rings Provided for hanging …

124

-

-

... More
SITC of Photo fluorescent self adhesive sticker with 5MM thickness foam 16X6 inchs with Hanging Chain Exit Board.

46

-

-

... More
SITC of photo Fluorescent self adhesive sticker with 3mm thickness foam, Do's & Don'ts 16X24 inchs

16

-

-

... More
Emergency Evacuation plan in Photo Fluorescent Self adhesive Sticker with dual side acrylic, SS studds.

16

-

-

... More
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISIMAKE / EQUIVALENT.

8

-

-

... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipeline in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: HGURU / ISI MAKE /EQUIVALENT.

16

-

-

... More
Supplying and fixing of GI cable tray at suitable heights to carrying fire fighting cables with required accessories etc, complete and as directed by the departmental officers.GI perforated cable tray comes in variety of sizes. Width Available from 50 mm to 1500 mm Side walls 40 mm to 150 mm Rugs from 30 mm to 75 mm Finished available are: Painted, powder coated Epoxy coating Hot Dip Galvanized Made out of : Iron sheets Mill galvanized sheets Aluminium sheets. The Cable tray is manufactured using high grade galvanized iron with advance technology.

-

-

-

... More
GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height

40

-

-

... More
GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height

60

-

-

... More
Wrapping and coating anti-corrosive treatment for the following under ground MS pipe having one coat of anticorrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specifications and as directed by the Departmental Officers.

300

-

-

... More
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.

-

-

-

... More
100mm dia

239

-

-

... More
80mm dia

138

-

-

... More
50mm dia

573

-

-

... More
40mm dia

3480

-

-

... More
Supply and fabrication of MS channel of size 100x50x6mm and 75x40x6mm for MS 'C' class pipes support of size 250mm dia, 200mm dia, 150mm dia with welding cost, wedge anchor fastener for the supports, with black paint and support of 'U' clamp.

3000

-

-

... More
Supply and laying of 240 sq.mm. 3 core HT XLPE 11KV (E) SISMV11E3 x 2402797

100

-

-

... More
Networkable active repeater with full control, semi - flush or wall mounting , includes RS 485 clause a network card. Compatiable with GST200, GST IFP8.

1

-

-

... More
Supply and fixing of 42U rack for mounting all the above equipments

2

-

-

... More
Supply and fixing of 120 minutes Fire rated door

-

-

-

... More
Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1500mm x 2350mm with following specification: a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS g. Door Closer with Standard Arm Finish: Silver h. Lock Set: Dead Lock with both side key i. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame o. Rated Glass Schott Pyran with Frame p. Anchor Bolt with Endcaps The above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the Departmental Officers.

28

-

-

... More
Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1200mm x 2100mm with following specification: a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS g. Door Closer with Standard Arm Finish: Silver h. Lock Set: Dead Lock with both side key i. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame o. Rated Glass Schott Pyran with Frame p. Anchor Bolt with Endcaps The above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the Departmental Officers.

14

-

-

... More
Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1500mm x 2400mm with following specification: a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS g. Door Closer with Standard Arm Finish: Silver h. Lock Set: Dead Lock with both side key i. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame o. Rated Glass Schott Pyran with Frame p. Anchor Bolt with Endcaps The above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the Departmental Officers.

24

-

-

... More
STRUCTURAL GLAZING Design, supply and install unitized four sided structural glazing system curtain wall custom designed to withstand design wind pressure conforming toIS 875part III, with silicon gaskets in exposed grooves and microwave cured EPDM gaskets in unexposed area, structural and weather sealents of DOW Corning or approved make, norton spacer tape Backer rod, bracketing system with mild Steel hot dip galvanised brackets designed to accommodate three dimensional moments with serrated plate serrated washers, fastener and Anchor bolts of approved make, separators to prevent bi- metallic corrosions 1.2mm thick GI trims and flashing to seal gaps between curtain wall and the building structure all complete required to perform as per specification and approved shop drawing.The system shall be designed of 11 floor with wind resistance subcill gutter at floor level and wind load and dead load bracket at top with provision to accommodate movement at all levels and at every grid panels horizontally. The system shall be designed to accommodate 24mm thick DGU in vission area and 6 mm SGU in spandrela area. All fix vision glass should look similar in the elevation. The design shall also provide slope in gutter profile with drain slots of sufficient size. All in between mis transome shall be flush with the million.Note: If required laboratory test for system design of thermal movements, air infiltration, water pentration, seismic movement and structural movement. Silicon sealent structural grade and weathering grade shall be DOW sil make as per the design requirement. Also laboratory test for mentioned the above cost will be added as per testing laboratory rate. The complete system shall demonstrate performance for Air seal or water seal or structural requirement. onsite test for workmanship verification shall be carried out in stages for water penetration hose test. The extruded aluminium sections of alloy 6063 T5/T6 & tolerences confirming to DIN / EN standard from approved extruder. The structural profiles shall have minimum 2mm wall thickness. All the profiles shall have minimum 60-80 microns powder coating finish as per AAMA 2604 specification. The non visible aluminium surfaces shall have minimum chromating tratment. All shade approval shall be as per architects approval.

-

-

-

... More
UNITIZED GLAZING SYSTEM Glass for vision : 24 mm thick DDU of 6mm thick ST series reflective HS glass + 12 mm + 6mm thick clear toughened glass Note: The rate includes both system and glass

3456

-

-

... More
INSULATION OF SPANDREL Providing and fixing Rockwool slab - 48 kg/Cum and having 50mm having 50 mm thick thermal Rock of rockwool India, laminated between factory pressed black glass tissue and using 1.0 mm thick GI tray painted finish insulation with fold alround to a height of 25 mm minimum to fix the stiffner flat and the cable / holding pin as thermal insulation to be fixed behind spandrel area as mentioned. Included screws pins etc. All the edges between tray and frame to be sealed with whether silicon sealent of approved make. System to be designed to withstand designs wind pressure of 200 kg / Sqm

2016

-

-

... More
OPENABLE WINDOW Extra over for top hung openable aluminium window systems integrated with unitized curtain wall system are to be fully prefabricated assembled units completed with factory glazed panels with accessories, limit restricted stay harm, handles, SS friction stay arm excludes glass. All aluminium extrusion shall be powder coating finish 50 microns color to architect selection. Additional framing system to accommodate openable window integratd with unitizd system -glass quantity covered and system price in 1.windows all fittings such as accessories, multi point locking, hardwares etc as per specification and to architect selection

6

-

-

... More
ALUMINIUM COMPOSITE PANEL SYSTEM Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

1684.2

-

-

... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work

24.3

-

-

... More
Supply &fixing Mild steel grill of approved. The cost including of necessary screws, plugs, one coat of red oxide primier of approved quality, labour charges for fixing etc all complete

729

-

-

... More
IInspection chamber : Construction of Inspection chamber of size 60x60x90cm with brick jelly concrete 1:8:16 ( one of cement eight of sand and sixteen of hard broken jelly ) using 40mm gauge broken brickjelly 15cm thick for foundation and 23cm thick brick masonry in C.M. 1:5 ( One of cement and five of sand) using Fly ash bricks of size 9”x4-3/8”x2-3/4” plastering with cement mortar 1:3 ( One of cement and three of sand) 12mm thick on both sides top and bottom including earth work excavation, supply and fixing of SFRC cover slab of size 60cmX60cm including benching charnelling fixing cover slab in position curing finishing etc., complete in all respects.complying with relevant standard specification and as directed by the departmental officers.Inspection chamber - 90x90x120 cm

8

-

-

... More
Supply & Laying of 300mm Dia RCC Hume Pipe Below Ground Level including jointing of pipes with mortor and labour charges for jinting etc., complete at required places and as directed by the departmental officers

290

-

-

... More
DUSTBIN Providing of Dust bin 1100 Liter capacity with 4 wheels including all charges etc.,

6

-

-

... More
Providing of Dust bin (twin bin) 33 litres capacity

96

-

-

... More
Providing of Dust bin (twin bin) 20 litres capacity

24

-

-

... More
Signages Supplying sign boards made in 3mm thickness exterior grade Aluminium composite Sheet CNC cutting with 3M cut vinyl graphics for, Floor indication numbers. Size: Height 6" x Width 6"

140

-

-

... More
Supplying sign boards made in 3mm thickness exterior grade Aluminium Composite Sheet CNC cutting with 3M cut vinyl graphics for indicating, Room names. Size:Height 4" x Width 18"

236

-

-

... More
Supplying sign boards made in 3mm thickness exterior grade Aluminium Composite Sheet CNC cutting with 3M cut vinyl graphics for indicating, GATE-1 IN, GATE-2 IN, GATE-1 OUT & GATE-2 OUT. Size: Height 6" x Width 12"

7

-

-

... More
Supplying sign boards made in 3mm thickness exterior grade Aluminium Composite Sheet CNC cutting with 3M cut vinyl graphics for indicating Block No. Size: Height 12" x Width 12"

2

-

-

... More
Installation charges for total Signages

1

-

-

... More
Supplying and Painting the numbering & car parking slot with 2 coats approved Enamel paint in Stilt Floor and Open area car marking of 5m x 2.5m with 4" thick including labour charges and etc., complete in all respect complying with relevant standard specification and as directed by the departmental officers.

607

-

-

... More
Supplying and Painting Drive way 4"thk including Labour charges and etc., complete in all respect complying with relevant standard specification and as directed by the departmental officers.

1323.04

-

-

... More
Paver block Supplying and filling in foundation and basement with filling M sand in layers of 100mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand as directed by the Departmental officers.

21.81

-

-

... More
Supplying and Laying rubber moulded cement concrete paver block of 63mm thick using this cement concrete 1:1.5:3 (One cement One and half sand and three aggregate) complete and as directed by the department officer.The rate is inclusive of labour charges for laying compacting using earth rammer,conveyence charges etc..

218.1

-

-

... More
Fly Ash Brick work in cement mortar 1:6 ( One of cement and six of Msand) using chamber burnt Second class ground moulded stock bricks of size 9"x 4 3/8"x 2 3/4" having minimum average crushing strength of 50Kg/sqcm for super structure in the following floors including labour for fixing the doors ,windows and ventilator frames in position fixing of hold fast ,scaffolding ,curing etc complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers

15.05

-

-

... More
STP WATER PROOFING Providing and doing waterproofing work by following specifications and procedures. 1. Prepare the surface thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles. Well prepared substrate. 2. Before applying the primer make the surfaces free from the dust and sand particles by brooming and allow it dry 3. One coat of SHALITEX primer should be thoroughly stirred before use and applied to the substrate by means of brush, roller. 4. After primer dry, Apply two coats of TANKMASTIC primering area. 5. Allow coating to dry for 5-6 hours prior to applying first coat & second coat.

965

-

-

... More
OWC Supply of CERMOSIS organic waste composter OWC CER 125 (Semi- Automatic (250 Kg/hr) dimension of the machine CER 250: 2.2m Length * 0.9mbreath*1.3m Height 125KG Semi-Automatic organic waste converter Conversion chamber, motor for agitation Conversion chamber • Tank material: SS 304round bottom tank • Agitator Shaft: SS304 Seamless • Gearbox: Transtec/Equivalent Outer Body • Outer Body Material: mild steel • Structures and frame: mild steel • Completely open able housing for maintenance

1

-

-

... More
External Shredder 100kg/Hr

1

-

-

... More
Rack System for storing crate Length:2000mm Breadth:600mm Height:1000mm (10 Nos)

1

-

-

... More
Storing Crate Colors: Blue/Green Capacity:20Kgs/per crate size OD:600 x 400 x 175mm (350Nos)

1

-

-

... More
STP FOR STP (Sewage Treatement Plant) -200 KLD Raw Sewage Pumps: Collection tank to Equilizaion TankFlow rate 50 cu.m / hr. Head - 20-25 Mtrs Pump : CI Motor - 7.5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
M.S. Bar ScreenTo remove the large sized particles present in the sewage water associated with set of guide angles in MS flat of 6.0 mm thick and 50 mm wide kept inclined at 45 degree to the horizontal at 20 mm c/c with one no. handrack in GI. Bar rack fabricated from MS bars shall be provided to cover the width of the screen chamber with a racking arm for manual operation. Size: 1500mm x 1500 mm. Opening: 10 mm MOC: MSEP

1

-

-

... More
Oil Skimmer The skimmer works by using a specially designed floating head that attracts and separates the oil from the water surface. The collected material is then removed and taken for disposal Type : Belt & Manual Slotted Motor & Oil removal : ½ HP & 30 lph Supporting in Tank:To be provided (MS Frame) as per skimmer size MOC of Belt: Oleophyllic Polymer, Motor & Size & MOC:Motor: 1/2 HP, Belt Size: 100mm Width x 2500mm Depth, Triple Belt

1

-

-

... More
Sewage Transfer Pumps : ( Equalization Tank To SBR I & II ) Flow rate 50 cu.m / hr. Head - 20-25 Mtrs Pump : CI Motor - 7.5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
SBR I Transfer Pumps : ( SBR I To Decanting Tank ) Flow rate 50 cu.m / hr. Head - 20-25 Mtrs Pump : CI Motor - 7.5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
SBR II Transfer Pumps : ( SBR II To Decanting Tank ) Flow rate 50 cu.m / hr. Head - 20-25 Mtrs Pump : CI Motor - 7.5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
SBR I Sludge Transfer Pumps : ( SBR I To Sludge HoldingTank ) Flow rate 15 cu.m / hr. Head - 20 mtr Pump : CI Motor - 2 HP Make :Kirlosakar / Equivalent

2

-

-

... More
SBR II Sludge Transfer Pumps : ( SBR II To Sludge HoldingTank ) Flow rate 15 cu.m / hr. Head - 20 mtr Pump : CI Motor - 2 HP Make :Kirlosakar / Equivalent

2

-

-

... More
Decanting Pumps : ( Decant To FFT )Flow rate 50 cu.m / hr. Head - 20-25 Mtrs Pump : CI Motor - 7.5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
Decanting Sludge Pumps : ( Decant To Sludge Holding Tank ) Flow rate 15 cu.m / hr. Head - 20-25 Mtrs Pump : CI Motor - 2 HP Make :Kirlosakar / Equivalent

2

-

-

... More
Filrer Feed Pumps : ( FFT to PSF & ACF ) Flow rate 15 cu.m / hr. Head - 20-25 Mtr Pump : CI Motor - 5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
Blowers : ( Aeration to Collection/EQ/SBR I &II )Rotary twin lobe compressor comprising Common base frame, Suction filter, Suction & Discharge Silencer, NRV, V-belt, V-belt Guard, Drive & Driven pulleys, Inter connecting piping, Set of foundation bolts, Safety valve, Pressure Gauge Capacity 600 cu.m / hr. Pressure - 0.5 Kg/Cm2 Blower RPM : 1309 Motor - 20 HP Motor RPM :1440 Make : Kay / Equivalent

2

-

-

... More
Blowers : Acoustic Hood

2

-

-

... More
Fine Bubble Air Diffusers:Fine bubble air diffusers in EQ/SBR tanks to provide oxygen required for biodegradation in EQ/SBR Tank.

100

-

-

... More
Sludge Handling System : ( SHT to Screw Pump Feed pump ) Flow rate 15 cu.m / hr. Head - 20 mtr Pump : CI Motor - 2 HP Make :Kirlosakar / Equivalent

2

-

-

... More
Screw Pump : ( Screw Pump to Filter Press ) Flow rate 6 cu.m / hr. Head - 7-8 Bar Pump : CI Motor - 5 HP Make :Hexical Pumps / Equivalent

1

-

-

... More
Filter Press Specifications:Size : 915mm x 915mm No.of Plates : 50 No. of Chambers : 49 Material : Virgin Poly propylene Structure : MS Fabricated Structure Load : 75 Tons Filter Cloth : Butterfly [50 Nos] Motor : 5 HP

1

-

-

... More
Control Panel : [Sewage Treatment Plant] Fabrication, Erection testing of Control panel. Incoming switch protection unit and all outgoing are DOLfeeder, MCB, amps as required, RYB indication with meter unit, non compartment type with group starters. Type : Semi Automatic

1

-

-

... More
Pressure Sand Filter : Supply, of sand pressure filter for filtration of suspended impurities in treated sewage water and designed to remove suspended particals / impurity in treated sewage water. The sand pressure filter unit shall comply with the following technical requirements: Flow rate - 10 Cu.m / hr Back wash duration - 15 minutes Filtering Media - Sand/Pebbles. Pressure drop across unit. - 0.3-0.5 Kg/ sq.cm (max) Height of sand pressure filter unit - 1800 mm dia. (Approx.) Dia of sand pressure filter unit - 1200 mm dia. (Approx.) Further, the sand pressure filter unit shall comprise of the following: The sand pressure filter vessel shall be fabricated out of MS plate not less then 6mm thick with dish ends out of 8 mm thick plate and painted internally with two coats of anticorrosive epoxy paint after sand blasting and externally with two coats epoxy primer followed by two coats of enamel paint of approved colour. The Sand Pressure filter shall be fitted with top inlet distribution and bottom collecting system. Pressure gauge shall be provided at inlet and out let of Sand Pressure filter.Initial charge of underbed and multigrade filtering media as required. Complete set of valves, pressure gauge with needle valve and frontal piping at inlet, outlet backwash and drain out point etc., with UPVC (sch- 80) pipe.

1

-

-

... More
Activated Carbon Filter : Supply, of Activated Carbon filter for filtration of Colour & Odour in treated sewage water and designed to remove suspended particals / impurity in treated sewage water. The sand pressure filter unit shall comply with the following technical requirements: Flow rate - 10 Cu.m / hr Back wash duration - 15 minutes Filtering Media - Sand/Pebbles. Pressure drop across unit. - 0.7Kg/ sq.cm (max) Height of sand pressure filter unit - 1200 mm dia. (Approx.) Dia of sand pressure filter unit - 1800 mm dia. (Approx.) Further, the sand pressure filter unit shall comprise of the following: The sand pressure filter vessel shall be fabricated out of MS plate not less then 6mm thick with dish ends out of 8 mm thick plate and painted internally with two coats of anticorrosive epoxy paint after sand blasting and externally with two coats epoxy primer followed by two coats of enamel paint of approved colour. The Sand Pressure filter shall be fitted with top inlet distribution and bottom collecting system.Pressure gauge shall be provided at inlet and out let of Sand Pressure filter.Initial charge of underbed and multigrade filtering media as required.Complete set of valves, pressure gauge with needle valve and frontal piping at inlet, outlet backwash and drain out point etc., with UPVC (sch- 80) pipe.

1

-

-

... More
Pump Lifting Chain Back Pully for Pump Lifting MOC Lifting - Stainless Steel MOC Hand chain - GI Capacity : 1 Ton

16

-

-

... More
Media for Activated Carbon Filter & Pressure Filter Sand Pebbles Carbon

1

-

-

... More
Chlorine Doser :Supply, of online electronic Dosing System Comprising for sodium hypo dosing unit single moulded PP cylindrical type chemical solution tank of 50 litres capacity having detachable lids with moulded inserts for mounting of pumps and stirrer. 1 No Electronic diaphragm type positive displacement pumpfor chemical dosing with plastic head. Complete set of pipes, valves and fittings, foot valve magnetic float switch to trip the dosing pump at low level of chemical in the tank. The free chlorine content in the filtered water shall not be less than 0.5 PPM. Min. Actuating Pressure - 0.3 kg/sq cm Max. Working Pressure - 0.5 kg/sq cm Max. Temperature - 50 degree Centigrade Dosing flow range- 3 Litre / day. Head - 5 - 10 mtr Make : e- Dose / Equivalent

5

-

-

... More
Electro Magnetic Flow meter Size: 50 NB Make : Frehnig Accesssories : Complete set Qty : 2 Nos Location : (Sewage EQ Inlet & UF Outlet )

2

-

-

... More
Ultra Fitration Feed Pump Flow rate 10 cu.m / hr. Head - 20-25 mtr Pump : CI Motor - 5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
MCP-Filter Cartridge Filter Housing

2

-

-

... More
Ultra Fitration Backwash Pump Flow rate 12 cu.m / hr. Head - 20 - 25 mtr Pump : SS Motor - 5 HP Make :Kirlosakar / Equivalent

2

-

-

... More
Ultra Fitration CIP Pump with System Flow rate 12 cu.m / hr. Head - 20 - 25 mtr Pump : SS Motor - 5 HP Make :Kirlosakar / Equivalent CIP Tank - 1000 Lts

1

-

-

... More
Ultra Fitration Module Flow rate 10 cu.m / hr. QTY - 4 Nos Type : Hollow Fiber SQ. FT - 200 Sq.m Make :Team

4

-

-

... More
Ultra Fitration - SKID MOC - MSEP Inter Connecting - uPvc Piping Pressure Gauges - Included [3 Nos] Valve type - Actuator [5 Nos] Header - Inluded uPVC

1

-

-

... More
Control Panel : [Ultra Filtration] Fabrication, erection testing of Control panel. Incoming protction unit and all outgoing are DOLfeeder, non compartment type with group starters.

1

-

-

... More
Instruments: [ Pressure Gauges / NRV / Floaty / Roto meter ] Pressure Guages : 21 Nos NRV : 42 Nos, Float Switches : 7 Nos Roto meter - 2 No scope: From Collection Tank to Treated water Tank

1

-

-

... More
Inter Connection of Piping: Supply, of piping works including Suction and delivery of all pumps, blowers, Filters complete alingment with following specification. Pipes & Fitting : UPVC (SCH-40) & GI [Blower / Diffuser]Scope: Complete piping from Collection Tank to Treated water Tank along with bend, Elbow, T Joint, Unions, Coupling, Valves, Reducers, Bushes , Male thread Adaptor & Female thread Adaptors required as per site requirements

1

-

-

... More
Electrical Cables & Tray for Lying Supply, of electrical cables /Tray to all related suppling scope of motors, Pumps , Components & Equipments. - Make: Orbit / Equivalent Cables : 4 Core Scope: From Collection Tank to Treated water Tank along with Supporting items

1

-

-

... More
Fabrications Work:Fabrication of MS channels and square tubes for Grey treatment plant. The channels and tubes are used to support the structure of the plant and to provide strength and stability. The fabrication process involves cutting, bending, welding and finishing of the MS materials according to the design specifications. ( incl Bolts, Nuts & Washers, Puddle Pipes , Painting , Display Process Diagram Supplied Electro Mechanical items as required ) Scope: From Collection Tank to Treated water Tank all supporting structure works

1

-

-

... More
Commisioning Chemicals: [STP/UF]

-

-

-

... More
Initial trail commisioning chemicals only

1

-

-

... More
Erection , Testing, Installation, commmissioning incl Transporation, Loading / Unloading, Crane Charges, for the complete setup of electro mechanical activities - Sewage Treatement Plant & Ultra Filtration Plant

1

-

-

... More
CIVIL WORKS Supply &fixing Mild steel grill as per the design approved to door enclosure or gate including one coat of primer of approved including 3mm thick MS plate to cover the grill gate. The cost including of necessary screws, plugs, one coat of red oxide primier of approved quality, labour charges for fixing etc all complete and as directed by the departmental officers

176.4

-

-

... More
White washing three coats using clean shell lime slacked and screened including cost of lime, gum, blue brushes, scaffolding etc., complete in all respects and as directed by the departmental officers.

81.84

-

-

... More
Painting the New Walls with two coats of approved Plastic Emulsion paint over one coat of primer with two coats of putty to Cement Plastered wall surface and as directed by the departmental officers

244

-

-

... More
Painting two coat over new wall with weather shield emulsion paint over the prime coat and Labour Charges etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. (The quality and shade of paint should be got approved by the Executive Engineer before use).

282

-

-

... More
Painting new iron work with two coats of approved I st class synthetic ready mixed enamel paint of approved quality, brand and shade over the existing priming coat. The paint should be supplied by the contractor at his own cost. (The quality and shade of the paint should be got approved from the Executive Engineer before use on works) etc. all complete complying with relevant standard specifications and as directed by the departmental officers

10.08

-

-

... More
IBMS Supply and Fixing Panic bar for fire and smoke oheck doors with following specifications.Stainless steel latch and security anti-thrust latch Certified as per UL 10C, 1-3 Hours fire rated Nodogging device External body part material of SS 304 grade Push bar body material of SS 304 grade Steel mechanism housing SS Rear cover plateAluminium SSS head cover Compatible with external trim OZ-PB-CTRIM- F-STD SSS etc complete complying relavant with standardspecifications and as directed by the departmental officer.

66

-

-

... More
Supply, Installation, testing, commissioning, trainging and AMC ofB uilding Management System PLC, Remote Processor, Siganl lnterfacew iring and cabling with field equipment interface and provision ofs upervisory control and monitoring for M&E SCADAco ntractor usings tandard protocol over Ethernet(Station LAN-Provided by Others(S&TC ontractor)) as per specification and Tender clauses.SOFTWARE - RPU Programming and Configuration Software(Ratei ncluded in item 11.1)(Complies to SIL-2)Programme software for RPU logic develolpment and debugging foru se withc ompatible Personal Computer with Licence to carry requirede ngineeringa nd maintenance function with below marked minimum functions:R PU Programming and Configuartion Functionality RPU digriosis and data monitoring function locally.RPU histroic data download function for record and faull segregation process.R PU software interlock and logic development for process or data management Communication and Integration mangement and configuration of 1/0s fucntion a The RPU shall be capable of fully stand-alone operation and shall be independent of any centml computer for all specified control or communication applications. The software shall include all necessary routines and modules required to implement any control strategy and shall be user programmable. The programming language shall be English and shall use standard conools terminology. b Input and Output point processing shall include: (i) Continuous update of input and output values, conditions and status. All connected points are to be updated at a maximum of 5 second intervals, under worst conditions. (ii) Analog to digital conversion of input values shall be carried out with at least 11 bit resolution with typically 40 dB series mode rejection @50 Hz. It shall be possible to calibrate the inputs by means of movable jumpers or links to suit the sensor type in use, to achieve a high accuracy reading. (iii) Input reading shall be automatically checked to determine that the reading is within the sensor's range and within the range of the input circuit, i.e. 0-10V or 4-20mA. Should this not be the case then an alami

1

-

-

... More
Supply installation testing and commissioning of Occupancy sensor based movement detector with a build-in switch suitable for recessed mounting at a height of 3m with detection pattern of 6m X 8m. The sensor should have an operating voltage range of 230VAC +/10%; 50/60Hz and should be able to taLe upto 6A of electrical load and should be able to provide the switch off delay from 1 minute to 30minutes range. The sensor should be in compliance with EN/IEC 60669- 2-1, IEC (EN) 60669-2-1, IEC (EN) 61547, IEC (EN) 55015 and IEC (EN)55022, olass B.eto complete complying relavant with standard specifications and as directed by the departmental officers.

100

-

-

... More
Supply and fixing Timing Sensor Power Saver Auto On and Off Imagine Pir Switch for Light etc complete complying with standard specification and as directed by the departmental officers.

200

-

-

... More
Supply and fixing Temperature Sensor etc complete complying with standard specification and as directed by the depamnental officers.

56

-

-

... More
Supply and fixing Humidity Sensor etc complete complying with standard specification and as directed by the departmental officers.

56

-

-

... More
Supply and fixing of Ultrasonic type water flow meter etc complete complying with standard specification and as directed by the departmental officers.

14

-

-

... More
Supply and fixing of piezo-electric type pressure transmitter for water etc complete complying with standard specification and as directed by the departmental officers.                 

14

-

-

... More
Supply, installation, Testing and Commissioning of Water leak detection control panel of 4/2/8 zone type consisting with features like, Auxiliary alarm contacts, Monitored alarm outputs, Open & short circuit line monitoring, Bright LED's for indication. Panel shall have lockable enclosure. The panel shall work. The Panel shall be compactable to BMS system showing. The vendor shall consider the necessary (if required) interface modules, integrators etc and all module necessary for successful operation and BMS integration of the complete system as per the site requirement.

-

-

-

... More
Water Leak Cable with end Connections (Each Length of 5 X 20 Mtrs)

980

-

-

... More
6 Zone Water Leak Detection Panel

14

-

-

... More
Alarm modules for constantly monitoring the cable and sends the alarm to panel.

14

-

-

... More
PVC Junction Box

48

-

-

... More
2 x 1 sq mm sc Un Armoured Cable.

700

-

-

... More
PVC Conduit 25mm including all fittings.

14

-

-

... More
Install and supply Tempyature & Ventilation sensor for Monitoring’ •

14

-

-

... More
Strom water Drain Earthwork excavation in sand silt or other loose soil wet sand or silt, light black cotton, sandy loam soil and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and bailing out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 metre and lifts as specified hereunder etc., all complete in all respects complying with relevant standard specification excluding refilling ( OPEN EXCAVATION)

1232.8

-

-

... More
Supplying and filling in foundation and basement with filling sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling sand and as directed by the Departmental officers..

85.7

-

-

... More
Providing and Fixing of FRP Gratings of 600 x 300 mm size with M.S Flats of size 25 x 10mm for outer frames 25 x 6mm for inner braces and PVC pipe 150mm dia fixed with mild steel gratings including cost and conveyance of pipes and gratings and fixing them in position (PWD SOR 2024-25 V-I Pg.no.278) W-0066

98

-

-

... More
External Electricals, DG, Transformer, RMU, Cable Tray Sub Head No: I - RMG & HT PANEL SITC of Indoor type Ring Main Gear (RMG), 11 KV, 630A, with a rated breaking capacity of 500MVA and rated short time current of 60KA, 3phase, with 2 nos Air break switch as Incoming and 1 no Vacuum circuit breaker as outgoing, and panel with air insulated copper bus bars. The panel shall have both manual as well as motorized operation and shall conform to relevant IS/EB standards. The panel shall comprise of all necessary CT, PT, indication lamps, power pack, space heating thermostat, Electronic trivector meter, IDMTL Relay etc. complete as required. INCOMER (2 Sources) :11kV, 630A, 26.2kA LOAD Break Switch (Air Break) with necessary required accessories - 2Nos OUTGOING :11kV, 630A, 26.2kA VACCUM Circuit Breaker with necessary required accessories : 1No

1

-

-

... More
Design, supply, installation, testing and commissioning of VCB 3 panel, comprising of 1 Each of 11KV, 630A, 25kA VCB as incomer and 2 Nos of 11KV, 630A, 25kA VCB as outgoings, HT Outdoor 3 Panel VCB Board with all accessories and all metering, protection for satisfactory operation.

1

-

-

... More
Supplying of following sizes of 11KV, 3 core, Earthed, XLPE Insulated, Aluminium conductor individual core screened, flat steel strip armoured cable. 300 sq.mm.

65

-

-

... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for the following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 300 sq.mm

6

-

-

... More
Sub Head No: II - TRANSFORMER Supply & Installation of 2000 KVA, 11KV/433 V, 50 Hz, DY 11, 3 Phase Oil Type Transformer with ON LOAD TAP CHANGER & RTTC Panel with all standard accessories.

2

-

-

... More
Supply,laying,testing and commissioning of 19 core 2.5 sqmm PVC insulated, Multi stranded, PVC sheathed armoured copper conductor cable.

55

-

-

... More
Supply, erection, testing and commissoning of terminations for 19 core 2.5 sqmm armoured copper cable.

2

-

-

... More
Supply,laying, testing and commissioning of 16 core 2.5 sqmm PVC insulated, Multi stranded, PVC sheathed copper conductor cable.

40

-

-

... More
Supply, terminations,testing and commissioning of 16 core 2.5 sqmm PVC insulated, PVC sheathed copper conductor cable.

2

-

-

... More
Supply,laying,testing and commissioning of 4 core 2.5 sqmm PVC insulated, Multi stranded, PVC sheathed armoured copper conductor cable.

150

-

-

... More
Supply, erection, testing and commissoning of terminations for 4 core 2.5 sqmm armoured copper cable.

10

-

-

... More
Sub Head No: III - SWITCH BOARDS MAIN MV PANEL - 1 Supply, Installation, Testing and Commissioning of Medium Voltage floor mounting Cubicle Type Single bus bar system Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached A) Incomer - 2Nos. (Transformer ) :3200 AMPS ACB, 65 KA (Ics) AC Motor operated Draw Out ( EDO )Type Four Pole Microprocessor based relay having Over current, short circuit with time setting and 6NO + 6 NC,indication for test,service,isolated ON /OFF trip indications, ShutterAssembly,Racking interlock Manual /Electrical closing& tripping . as specified in the technicalSpecifications.Metering Compartment:1 No- Digital Load Manager of Enercon Make (No.3460) or eqvt. With RS 485 Modubus protocal 1 Set – 3200/5A CT CL0.5 15VA for Measurement 1 Set – 3200/5A CT CL 1 15VA for PF Correction Relay 1 Set – Indication lamps for R,Y,B, Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control fuses, Auto Manual selector switch, TNC Switch.1No - Earth fault relay -CDG11 1 Set – 3200/5A CT CL5P10 15VA for Protection Relay Note: Provision should be made to connect 3200A TPN Aluminium busduct at top.B) Incomer - 2Nos. (DG Set ) :1600 AMPS ACB, 50 KA (Ics) AC Motor operated Draw Out ( EDO )Type Four Pole Microprocessor based relay having Over current, short circuit with time setting and 6NO + 6 NC,indication for test,service,isolated ON /OFF trip indications, ShutterAssembly,Racking interlock Manual /Electrical closing& tripping . as specified in the technicalSpecifications.Metering Compartment:1 No. Multiparameter Enercon make 6400 or eqvt. With RS 485 MODUBUS protocal with suitable CTs .1 Set – 2500/5A CT CL0.5 15VA for Measurement1 Set – Indication lamps for R,Y,B, Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control fuses.Auto Manual selector switch, TNC Switch.Note: Provision should be made to connect 2500A TPN Aluminium busduct at top.BUS COUPLERS- 1 Nos 4000 AMPS ACB, 65 KA (Ics) 4 Pole AC Motor operated Draw out( EDO ) type without relesae with ON/ OFF indication lamps with control fuses, Auto Manual selector switch, TNC Switch.OUTGOINGS: Bus-A 1600 A, TPN, Draw out type Air Circuit Breaker of 50 KA short circuit rating at 1 sec and Manual operated mechanism for closing with accessories with OC & SC releases as per specification.- 2 NOs. 1250 A, TPN, Draw out type Air Circuit Breaker of 50 KA short circuit rating at 1 sec and Manual operated mechanism for closing with accessories with OC & SC releases as per specification.- 2 NOs. 800 A, TPN, MDO type Air Circuit Breaker of 50 KA short circuit rating at 1 sec and Manual operated mechanism for closing with accessories with OC & SC releases as per specification.- 1 NO. 630 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 50 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 1 NO. 400 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 50 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 1 NO.250 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 50 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 1 NO. OUTGOINGS: Bus-B 1600 A, TPN, Draw out type Air Circuit Breaker of 50 KA short circuit rating at 1 sec and Manual operated mechanism for closing with accessories with OC & SC releases as per specification.- 2 NOs.1250 A, TPN, Draw out type Air Circuit Breaker of 50 KA short circuit rating at 1 sec and Manual operated mechanism for closing with accessories with OC & SC releases as per specification.- 1 N800 A, TPN, MDO type Air Circuit Breaker of 50 KA short circuit rating at 1 sec and Manual operated mechanism for closing with accessories with OC & SC releases as per specification.- 1 NO. 630 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 50 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 1 NO. 400 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 50 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 1 NO. 250 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 50 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 1 NO. Busbar:1 Set of 4000 A, TP& N Aluminium Busbar Bar for the entire length of the MV Panel as per specification with suitable RYBN color coding heat shrink sleevNote : Outgoing feeder shall be having digital type Energy meter, Voltmeter,Ammeter ( Multifunctional Meter ) and selector switch with suitable rating CTs with communication port RS 485 having MODBUS Protocol.All the transformers incomer, DGs incomer and bus coupler shall be electrical & mechnical interlocking arrangements and also provided Auto/Manual Selecter Switch with PLC Control ..Incoming feeders shall be having digital type multi parameters, meters with communication port RS 485 having MODBUS Protocol,all relays and releases shall be micro processor based.

1

-

-

... More
ESSENTIAL PANEL Supply, Installation, Testing and Commissioning of Medium Voltage Floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached.INCOMER A) Incomer - 2Nos. 800 AMPS ACB, 35 KA (Ics) AC Motor operated Draw Out ( EDO )Type Four Pole Microprocessor based relay having Over current,short circuit with time setting and6NO + 6 NC,indication for test,service,isolated ON/OFF tripindications,ShutterAssembly,Racking interlock Manual /Electrical closing& tripping Then Incomers provided with mechanical interlock with two locks and single key as specified in the technicalSpecifications.Each Metering Compartment: 1 No- Multi function meter With RS 485 Modubus protocal 1 Set – 800/5A CT CL0.5 15VA for 1 Set – 800/5A CT CL 1 15VA for EB sensing to Dg startMeasurement 1 Set – Indication lamps for R,Y,B, Breaker ON(Red), Breaker OFF (Green), Breaker Trip (Amber) with control fuses, Auto Manual selector switch, TNC Switch. OUTGOINGS:400 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 35 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 1 NO. (Spare) 250 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 35 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 2 NOs. (Chiller Pump Panel & Utility Panel)200 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 35 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 2 NOS. (Lift Pane 1 & 2)125 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 35 kA Short Circuit Rating with Thermal Adjustable O/L and Magnetic Fixed S/C Protection - 2 NOS. (Ventilation Panel-1) Busbar:1 Set of 800 A, TP& N Aluminium Busbar Bar for the entire length of the Panel as per specification with suitable RYBN color coding heat shrink sleev.All the MV panel incomer 1&2 shall be electrical & mechnical interlocking arrangements and also provided Auto/Manual Selecter Switch with PLC Control.. Incoming feeders shall be having digital type multi parameters, meters with communication port RS 485 having MODBUS Protocol, all relays and releases shall be micro processor based

1

-

-

... More
600KVAR CAPACITOR PANEL Supply, Installation, Testing and Commissioning of Medium Voltage floor mounting Cubicle type APFCR panel suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached including necessary control wiring for automatic correction of Power factor ( 8 Stage )and as specification. Incomer 1600 AMPS ACB, 65 KA (Ics) 4 Pole AC Motoroperated Draw out( MDO ) type without relesae with ON/ OFF indication lamps with control fuses, Auto Manual selector switch, TNC Switch.1 Set of R Y B LED Type Indicating Lamps with HRC fuses and toggle switches .1 No Automatic Power factor correction relay for automatic correction of Power factor. Busbars 1600 amps TPN Al Bus bar with suitable RYBN color coding heat shrink sleev.OUTGOINGs 3 Set of 100KVAR capacitor bank each comprising of:i) 1 no. 400 A TP&N Fixed Type MCCB with manual closing mechnism of 25 kA rating with Thermal and Magnetic Short Circuit Protection ii) 1 No Triple pole capacitor duty contactor suitable for rating of capacitor.iii) 1 Set of ON/ OFF push button and indicating lamps. iv) 2 Nos. 50 KVAR MPP-H based capacitor 4 sets of 50KVAR capacitor bank each comprising of:i) 1 no.200A TP&N Fixed Type MCCB with manual closing mechnism of 25 kA rating with Thermal and Magnetic Short Circuit Protection ii) 1 No Triple pole capacitor duty contactor suitable for rating of capacitor.iii) 1 Set of ON/ OFF push button and indicating lamps. iv) 1 No. 50 KVAR MPP-H based capacitor2 sets of 25KVAR capacitor bank each comprising of:i) 1 no.100A TP&N Fixed Type MCCB with manual closing mechnism of 25 kA rating with Thermal and Magnetic Short Circuit Protection ii) 1 No Triple pole capacitor duty contactor suitable for rating of capacitor iii) 1 Set of ON/ OFF push button and indicating lamps iv) 1 No. 25 KVAR MPP-H based capacitor 2 sets of 15KVAR capacitor bank each comprising of:i) 1 no.63A TP&N Fixed Type MCCB with manual closing mechnism of 25 kA rating with Thermal and Magnetic Short Circuit Protection ii) 1 No Triple pole capacitor duty contactor suitable for rating of capacitor.iii) 1 Set of ON/ OFF push button and indicating lamps. iv) 1 No. 15 KVAR MPP-H based capacitor 2 sets of 10KVAR capacitor bank each comprising of:i) 1 no.63A TP&N Fixed Type MCCB with manual closing mechnism of 25 kA rating with Thermal and Magnetic Short Circuit Protection ii) 1 No Triple pole capacitor duty contactor suitable for rating of capacitor.iii) 1 Set of ON/ OFF push button and indicating lamps. iv) 1 No. 10 KVAR MPP-H based capacitor

2

-

-

... More
LIFT PANEL Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed INCOMER:1 Nos 200Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Fixed O/L and Fixed Magnetic S/C Protection INCOMER1 Nos 200Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Fixed O/L and Fixed Magnetic S/C Protection Metering 1 Set of R Y B LED Type Indicating Lamps with HRC fuses and toggle switches incomer shall have digital type Multi function meter to read KWH,suitable rating of CTs, with communication port RS 485 having MODBUS Protocol.. OUT GOINGS 6 Nos 100Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Fixed O/L and Fixed Magnetic S/C Protection 1 Nos 32Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Fixed O/L and Fixed Magnetic S/C Protection Busbar: 1 Set of 200 A, TP& N Aluminium Busbar with suitable RYBN color coding heat shrink sleev.

2

-

-

... More
UTILITY PANEL Supply, Installation, Testing and Commissioning of Medium Voltage Floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached.INCOMER 1 Nos 250 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C ProtectionBUS BARS 1 Sets of 250 Amps TP&N Aluminium Bus Bars with suitable RYBN color coding heat shrink sleev.Metering 1 Set of R Y B LED Type Indicating Lamps with HRC fuses and toggle switches incomer shall have digital type multi function meter, suitable rating of CTs, with communication port RS 485 having MODBUS Protocol..OUT GOING 2 Nos 100 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection with suitable digital type Multi function meter, suitable rating of CTs, with communication port RS 485 having MODBUS Protocol for each outgoings.1 Nos 80 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection with suitable digital type Multi function meter, suitable rating of CTs, with communication port RS 485 having MODBUS Protocol for each outgoings 2 Nos 63 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection with suitable digital type Multi function meter, suitable rating of CTs, with communication port RS 485 having MODBUS Protocol for each outgoings.2 Nos 32 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection with suitable digital type Multi function meter, suitable rating of CTs, with communication port RS 485 having MODBUS Protocol for each outgoings.

1

-

-

... More
Fire Pump Panel Supply, Installation, Testing and Commissioning of Medium Voltage Floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached.INCOMER2 Nos 630 Amps TP&N Type Motorised MCCB with ElectricalT he panel should be suitable for changeover the power automatically from source-1 (I/C-1) to source-2 (I/C-2) and vise versa while power failure happened at any one source with necessary Single phasing preventer, LVM’s and control contactors, On Delay Timer,EB ON / DG ON Lamps and Control MCB - 2 Sets and all required accessories. And also provide the selector switch for selecting auto / manual mode. In normal case the power shall be feed from source-1.BUS BARS 1 Sets of 630 Amps TP&N Aluminium Bus Bars with suitable RYBN color coding heat shrink sleev.Metering 1 Set of R Y B LED Type Indicating Lamps with HRC fuses and toggle switches incomer shall have Multi Function meter,suitable rating CTs with communication port RS 485 having MODBUS Protocol..OUT GOINGS2 Nos 400 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection with suitable digital type Multi Function meter, suitable rating CTs with communication port RS 485 having MODBUS Protocol for each outgoings.2 Nos 63 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection with suitable digital type Multi Function meter, suitable rating CTs with communication port RS 485 having MODBUS Protocol for each outgoings.2 Nos 32 Amps TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Thermal O/L and Magnetic S/C Protection with suitable digital type Multi Function meter, suitable rating CTs with communication port RS 485 having MODBUS Protocol for each outgoings. interlocking

1

-

-

... More
TERRACE VENTILATION PANEL-1 Supply, Installation, Testing and Commissioning of Medium Voltage Floor mounting Cubicle Type switch board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached. INCOMER 1 Nos 125 Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C ProtectioBUS BARS1 Sets of 125 Amps TP&N Aluminium Bus Bars with suitable RYBN color coding heat shrink sleev. Metering1 Set of R Y B LED Type Indicating Lamps with HRC fuses and toggle switches incomer shall have digital type multi function meter, suitable rating of CTs, with communication port RS 485 having MODBUS Protocol..OUT GOINGS 2 Nos 63 Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C Protection. 6 Nos 32 Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C Protection.

2

-

-

... More
VENTILATION PANEL-2 Supply, Installation, Testing and Commissioning of Medium Voltage Floor mounting Cubicle Type Motor Control centre with Type -II co- ordination components suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached.INCOMER 1 Nos 80 Amps TP&N Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C ProtectionBUS BARS 1 Sets of 100 Amps TP&N Aluminium Bus Bars with suitable RYBN color coding heat shrink sleevMetering 1 Set of R Y B LED Type Indicating Lamps with HRC fuses and toggle switches incomer shall have digital type multi function meter, suitable rating of CTs, with communication port RS 485 having MODBUS Protocol..OUT GOINGS9 Nos 16 Amps TP&N Type MCCB with Manual Closing Mechanism of 16 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C Protection.

1

-

-

... More
COMMON AREA METERING PANEL ( FLOORS Gnd to 11th) Supply, Installation, Testing and Commissioning of Medium Voltage Floor mounting Cubicle Type Distribution Board suitable for 415 V, 3 Phase, 50 Hz Power Distribution System with the following mounting complete as per specifications attached. INCOMER 2 Nos 125 Amps TP&N Type Motorised MCCB with Electrical The panel should be suitable for changeover the power automatically from source-1 (I/C-1) to source-2 (I/C-2) and vise versa while power failure happened at any one source with necessary Single phasing preventer, LVM’s and control contactors, On Delay Timer, EB ON / DG ON Lamps and Control MCB - 2 Sets and all required accessories. And also provide the selector switch for selecting auto / manual mode. In normal case the power shall be feed from source-1. interlocking BUS BARS 1 Sets of 125 Amps TP&N Aluminium Bus Bars with suitable RYBN color coding heat shrink sleev.Metering1 Set of R Y B LED Type Indicating Lamps with HRC fuses and toggle switches incomer shall have digital type energy meter with class 0.5 accuracy, suitable rating of CTs with communication port RS 485 having MODBUS Protocol for each outgoingOUT GOINGS1 Nos. 63 Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C Protection with suitable digital type energy meter with class 0.5 accuracy, suitable rating of CTs with communication port RS 485 having MODBUS Protocol for each outgoings.1 Nos. 40 Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C Protection with suitable digital type energy meter with class 0.5 accuracy, suitable rating of CTs with communication port RS 485 having MODBUS Protocol for each outgoings.5 Nos. 32 Amps TP&N Type MCCB with Manual Closing Mechanism of 25 kA Short Circuit Rating with Adjustable Thermal O/L and Fixed Magnetic S/C Protection with suitable digital type energy meter with class 0.5 accuracy, suitable rating of CTs with communication port RS 485 having MODBUS Protocol for each outgoings.

12

-

-

... More
Sub Head No: IV - Sandwich BUSDUCT & RISING MAIN Sandwich BUSDUCT

-

-

-

... More
Supply,Erection,Testing and Commissioning of 3200 A TPN 433v, 50HZ, LV BUS duct comprising of TPN Al Busbar housed in CRCA sheet enclosure necessary right angle bends, Adapter chambers.

30

-

-

... More
Supply,Erection,Testing and Commissioning of 3200A Flexible expansion joints.

4

-

-

... More
Supply,Erection,Testing and Commissioning of 1600 A TPN 433v, 50HZ, LV BUS duct comprising of TPN Al Busbar housed in CRCA sheet enclosure necessary right angle bends, Adapter chambers.

20

-

-

... More
Supply,Erection,Testing and Commissioning of 1600A Flexible expansion joints.

4

-

-

... More
Sandwich RISING MAIN

-

-

-

... More
Supply, Erection, Testing and Commissioning of 1600 A rated TPN Al Busbar Raising Main/ Rising main incomer.

96

-

-

... More
Supply,erection, testing and commissioning of 1 No 1600 A TP&N Fixed Type ACB with Manual Closing Mechanism of 50 KA Short Circuit Rating with Both Adjustable Thermal O/L and Magnetic S/C Protection as incomer to the Raising Main.

2

-

-

... More
Supply,Erection,Testing and Commissioning of 1600A Flexible expansion joints.

18

-

-

... More
Supply,erection, testing and commissioning of Tap off Boxes of the following rating on the Raising Main including interconnection to the Raising Main.

-

-

-

... More
400 A Tap off box with 400 A TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 KA Short Circuit Rating with both adjustable Thermal O/L and Magnetic S/C Protection.

48

-

-

... More
125 A Tap off box with 200 A TP&N Fixed Type MCCB with Manual Closing Mechanism of 25 KA Short Circuit Rating with both adjustable Thermal O/L and Magnetic S/C Protection.

24

-

-

... More
Sub Head No: V - Cabling Supply and Laying of XLPE insulated and PVC sheathed, aluminium conductor, 1.1 KV grade armoured.

-

-

-

... More
3.5C X 400 sqmm

1100

-

-

... More
3.5C X 300 sqmm

2200

-

-

... More
3.5C X 240 sqmm

750

-

-

... More
3.5C X 185 sqmm

650

-

-

... More
3.5C X 150 sqmm

400

-

-

... More
3.5C X 120 sqmm

400

-

-

... More
3.5C X 95 sqmm

400

-

-

... More
3.5C X 70 sqmm

780

-

-

... More
3.5C X 50 sqmm

300

-

-

... More
3.5C X 35 sqmm

350

-

-

... More
4C x 25 sqmm

500

-

-

... More
4C x 16 sqmm

500

-

-

... More
4C x 10 sqmm

400

-

-

... More
4C x 6 sqmm

200

-

-

... More
4C x 4 sqmm

200

-

-

... More
Sub Head No: V - Cabling Supply and Laying of XLPE insulated and PVC sheathed, aluminium conductor, 1.1 KV grade armoured.

-

-

-

... More
4C x 4 sqmm

50

-

-

... More
4C x 2.5 sqmm

500

-

-

... More
3C x 6 sqmm

230

-

-

... More
3C x 2.5 sqmm

465

-

-

... More
Supply and Installation of cable end termination with Single brass compression gland and Aluminium lugs for the following sizes of PVC Insulated XLPE Aluminium armoured conductor cable of 1.1KV grade complete as required..

-

-

-

... More
3.5C X 400 sqmm

36

-

-

... More
3.5C X 300 sqmm

34

-

-

... More
3.5C X 240 sqmm

16

-

-

... More
3.5C X 185 sqmm

8

-

-

... More
3.5C X 150 sqmm

30

-

-

... More
3.5C X 120 sqmm

24

-

-

... More
3.5C X 95 sqmm

12

-

-

... More
3.5C X 70 sqmm

38

-

-

... More
3.5C X 50 sqmm

24

-

-

... More
3.5C X 35 sqmm

12

-

-

... More
4C x 25 sqmm

8

-

-

... More
4C x 16 sqmm

50

-

-

... More
4C x 10 sqmm

40

-

-

... More
4 x 6 sqmm

12

-

-

... More
4 x 4 sqmm

12

-

-

... More
Supply and Installation of cable end termination with Single brass compression gland and Aluminium lugs for the following sizes of PVC Insulated XLPE Aluminium armoured conductor cable of 1.1KV grade complete as required..

-

-

-

... More
3.5C X 400 sqmm

2

-

-

... More
3.5C X 300 sqmm

30

-

-

... More
3.5C X 240 sqmm

4

-

-

... More
3C x 2.5 sqmm

20

-

-

... More
SUB HEAD: VI - CABLE TRAYS Supply, erection of following sizes GI ladder type cable rack system made out of sheet steel folded to required shape with adequate number of supports. (Cable tray support price is not included in this Items)

-

-

-

... More
450 mm width

600

-

-

... More
600 mm.width

102

-

-

... More
750 mm.width

300

-

-

... More
900 mm.width

100

-

-

... More
1000 mm width

650

-

-

... More
MS Supports

-

-

-

... More
Supply and erection of M.S. Material for above mention Cable tray, steel structure painted with two coats of primer and two coats of enamel paint.

14000

-

-

... More
Design, cutting, and fixing of 6 mm thick chequered plate with required MS angles for closing around the Panel & Internal trench closing. It should be covered with neatly without any gap around the rising mains as per IE Regulation. The gap between Wall and the chequred plate shall be covered with insulating materials.(External trench closing Refer Civil BOQ)

50

-

-

... More
Sub Head No: VII - EARTHING Body Earth Earthing with GI. earth pipe 3.0 metre long, 40 mm dia including accessories, and providing masonry enclosure with Man hole Covers Heavy duty, and watering pipe etc. with charcoal/ coke and salt as required.

16

-

-

... More
Neutral Earth Earthing with copper earth plate 600X600X3 mm including accessories, and providing masonry enclosure with Man hole Covers Heavy duty and watering pipe 2.5 Metre long etc. with charcoal/ coke and salt as required.

10

-

-

... More
Supplying,Erecting, connecting & commissioning a of 750mm. Long 50x6 mm. Cu flat in open fashion with necessary clamps, screws, etc. as earth link.

10

-

-

... More
Providing and fixing following sizes of copper wire on surface or in recess for connections etc. as required. 8 SWG Copper

1500

-

-

... More
Providing and fixing 75mm x 10 mm copper strip on surface or in recess for connections etc. as required.

100

-

-

... More
Providing and fixing 60mm x 10 mm copper strip on surface or in recess for connections etc. as required.

100

-

-

... More
Providing and fixing 50 mm x 6 mm GI strip surface or in recess for connections etc. as required.

1000

-

-

... More
Providing and fixing 25 mm x 6 mm GI strip on surface or in recess for connections etc. as required.

1500

-

-

... More
Sub Head No: VIII - SAFETY EQUIPMENTS : Supply and installing the following items as per local Electrical Inspectorate's requirement.

-

-

-

... More
2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

10

-

-

... More
Fire Buckets stand suitable for 4 Nos. fire buckets with Fire Buckets filled with stand.

2

-

-

... More
First Aid Box with stand.

2

-

-

... More
Shock Treatment Chart in 2 Language (Local Language and English)

2

-

-

... More
Supply & Fixing HT cable route marker with 10cm. x 10cm. 5mm thick G.I.plate with inscription thereon, bolted/ welded to 35mm x 35mm x 6mm angle iron, 60 cm. long and fixing the same in ground as required.

10

-

-

... More
Supply and fixing of 11 KV Al Danger Boards of size 12" x 8" both in Tamil and English

3

-

-

... More
Supply and fixing of 440V Al Danger Boards of size 6"x 4" both in Tamil and English

25

-

-

... More
Supply of 11 KV Tested Gloves with Box filled with chalk powder.

1

-

-

... More
Supply, Erection, Testing and commissioning of "EXIT" sign lamp fitted with integral inverter and battery for half an hour back up power with necessary suspension arrangement,connecting wires and all as required as per site requirement.

10

-

-

... More
Supply, Erection, Testing and commissioning of "ENTRY" sign lamp fitted with integral inverter and battery for half an hour back up power with necessary suspension arrangement,connecting wires and all as required as per site requirement.

10

-

-

... More
Dry chemical powder type fire extinguishers complete with initial charges, carbon dioxide gas cartridge, hose and fixing brackets etc of the following capacities confiriming to IS: 2171 5 KG capacity.

8

-

-

... More
AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

4

-

-

... More
Sub Head No: IX - DG Set 1010KVA, 415V, 0.8pf Silent Type DG Set with acoustic enclosure, Day Tank, Silencer, Starting Batteries, AVM pads, Skid type Control Panel along with Genset Controller, DG Set Isolator complete with required interconnections.

2

-

-

... More
SITC of Above nos D.G. Set 2 X 1010 - D.G. Exhaust chimney 30 mtr high approx, for above D.G. with silencer, insulation, cladding & adequate supporting, insulation with Al cladding,clamps to take out the flute to safe location.

1

-

-

... More
Fire Prone Lightening Arrestor above DG exhaust chimney SITC of Cu. Five Prone Lightening Arrestor to be installed on top of the Building, Pole etc

1

-

-

... More
SITC of Disconnecting link box for above LA For lightning down conductor at 1mtr. from GL with SMC insulator & Gunmetal disconnecting link

1

-

-

... More
LIFT LOBBY - HVAC WORK SH:- I VRF Units Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required 60 HP OUTDOOR UNIT The Quoted rate is including supply installation lifting leading

2

-

-

... More
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF 4Way Cassette 3' x 3' type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, with drain pump outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. 4.0TR

24

-

-

... More
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

780

-

-

... More
Providing, fixing, testing and commissioning of Variable refrigerant flow distribution REFNUTS /Y Joints including brazing complete in the suction & Liquid lines of copper refrigerant piping including insulation etc. as required.

24

-

-

... More
Supplying, drawing of following sizes of PVC insulated, PVC sheathed , Copper Conductor communication cable in pvc pipes as required. (For IDU Network, ODU network, for remote control units and for centralized monitoring & control system). 2 Core X 1.0 Sq.mm copper shielded communication cable.

540

-

-

... More
Supplying and fixing following sizes of regid / flexible PVC drain pipe with suitable clamps etc., for drain water connections from AC indoor units of all types & models upto the location as desired by the Engineer-In-Charge complete with all accessories etc., , as required.

-

-

-

... More
32 mm dia regid/ flexible PVC pipe with nitrile rubber insulation.

100

-

-

... More
25 mm dia regid/ flexible PVC pipe with nitrile rubber insulation.

90

-

-

... More
Towards pressure testing vaccummsing and Commissioning of above systems with additonal gas Charging R410 A

1

-

-

... More
LIFT Passenger Lift with M/C room, Speed 1.75 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Firerated doors and ARD. (20 Persons) Number of Lift /Type of Lift:12 Nos / NEXTRA-Passenger Capacity (Load / Speed):20 Persons (1360Kgs / 1.75m/Sec) Drive:MICRO Processor based VVVF Travel /PIT / Head Room:67.20M /PIT 1600mm /Head room Number of Floors / Stops:11 (2B+Slit+11Upper Floors) / 14 Floor Display Chart:B2,B1,S,1,2,3,4,5,6,7,8,9,10 & 11 Number of Landing Entrance:14 (2B+Stilt+11Upper Floors) Number and Position of car Entrances:1(ONE),In Front Only Position of Machinery:Directly above the Lift Well -Gearless Size of Lift Well:2400x2650mm (Length & Breath) Lift Car Inside Size:1700 x 1800mm (Length & Breath) Clear Opening of Gates/doors/Lintel:1000 x 2000mm (Wide and Height) Type or Design of Lift car:Stainless Steel (1.5mm) -Hairline Finish Additional Car Space:No Car ceiling -Car Floor:Sleek (Small Circular -JLFC 03)-SS Hairline Finish-20mmReccess -Granite flooring Car Fittings:LED Light & Regular (Circular)-FAN Type of Car font Enrance Protection:Power Operated Telescopic opening sliding Stainless Steel (1.5mm)-Hairline Finish Land Entrance Protection(0,1,2,3,4,5,6,7,8,9):Centre opening sliding Stainless Steel (1.5mm)-Hairline Finish Landing door Frame (0,1,2,3,4,5,6,7,8,9):Stainless Steel (1.5mm)-Hairline Finish Type Of Control System:Micro Processor based Triplex Selective Collective Control With /Without attendent Electric Supply:AC 415Volts, 3Phase, 50 Cycles Delivery Priod / Time of Erection:2Months / Ex-Works / 8 Weeks Special Additional Spcification 1.Battery operated Emergency Light and alaram bell 2.Call register signal and VF door operator 3.Landing push button landing door frames 4.Automatic resuce device 5.Vandal proof S.S button with S.S cover 6.Braille button 7.Full car operating panel 8.Dot matrix led D& P indicators in car & landing orange colour 9.Floor annunciator with music 10.firemans switch 11.False ceiling in car 12.Fire rating of landing door 2Hrs 13.Infra red screen 14.Overload warning indicator 15.Scaffloding 16.3Way intercom /press and speak phone 17.Free service for one year 18.Pit ladder 19 SS handrail 20.Lift license 21.Minor builders work 22.Mirror

12

-

-

... More
Land scapping Planting of Mahagony to a height of 9' to 10' at entrance front border landscape including earth work excavation,manur red earth caseno post including 1 year maintance Etc all complete

30

-

-

... More
Planting of saraca asoca to a height of 9' to 10' at entrance front border landscape including earth work excavation,manur red earth caseno post including 1 year maintance Etc all complete

30

-

-

... More
Planting of border plants at entrance front border landscape including earth work excavation,manur red earth caseno post including 1 year maintance Etc all complete

1000

-

-

... More
Planting of mecxican grass outdoor lawn including earth work excavation,manur red earth caseno post including 1 year maintance Etc all complete

800

-

-

... More
Planting of border plants at lawn area including earth work excavation,manur red earth caseno post including 1 year maintance Etc all complete

600

-

-

... More
Ficus benjamina

13

-

-

... More
Buddha bamboo

200

-

-

... More
Ficus starlight

13

-

-

... More
Spanish cherry

20

-

-

... More
Supply and fixing of Garden bench

4

-

-

... More
Border plants - Entrance front lawn area

200

-

-

... More
Garden soil & Fertilizer (filled with 60% of Red earth and balance 40% filled with mixture of garden soil and manure - Cow dung composition the ratio of 3:1:1)

289.98

-

-

... More
Providing and Planting of pot plants- Areca including pot, garden soil manure

15

-

-

... More
Providing and Planting of pot plants- Heliconia including pot, garden soil manure

15

-

-

... More
Engaging Garden Male

35

-

-

... More
Transport, Loading and unloading charges

13

-

-

... More
Sub Total 1

-

-

-

... More
Sub Total 2

-

-

-

... More
Sub total 3

-

-

-

... More
GST 5%

1

-

-

... More
GST 18%

1

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Combined ShapeCreated with Sketch.Sign In
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
TENDER BY COUNTRIES
View All
United States Tenders|
United Kingdom Tenders|
Spain Tenders|
France Tenders|
Qatar Tenders|
Australia Tenders|
Canada Tenders|
China Tenders|
Malaysia Tenders|
Maldives Tenders|
Singapore Tenders|
Bangladesh Tenders|
Ethiopia Tenders|
Bhutan Tenders|
Kuwait Tenders|
Oman Tenders|
Germany Tenders|
Egypt Tenders|
Ghana Tenders|
Saudi Arabia Tenders
TENDER BY AUTHORITIES
View All
Federal Road Agency Tenders|
Bangladesh Railway Tenders|
Area Metropolitana De Barcelona Tenders|
Jsc Russian Railways Tenders|
Kuwait Oil Company Tenders|
Civil Aviation Authority Tenders|
Food And Agriculture Org. Tenders|
Eskom Tenders|
Energy Regulation Commision Tenders|
Dept Of Defence Tenders
TENDER BY CATEGORIES
View All
Agriculture Or Forestry Works Tenders|
Automobiles And Auto Parts Tenders|
Civil And Construction Tenders|
Consultancy Services Tenders|
Education And Training Services Tenders|
Electrical And Electronics Tenders|
Finance And Insurance Sectors Tenders|
Food Products Tenders|
Furnitures And Fixtures Tenders|
Healthcare And Medicine Tenders
TENDER BY PROCUREMENT
Goods Tenders|
Works Tenders|
Services Tenders
OFG MANUFACTURING BUSINESSES PRIVATE LIMITED
  • Head Office
    6th Floor, Global Business Park, Tower A, Besides Guru Dronacharya Metro Station, Gurugram, Haryana - 122002, India
  • Sales Office
    B - 705 & 706, Sankalp Iconic Tower, Opp. Vikramnagar Colony, Iscon Cross Road, S. G. Highway, Ahmedabad - 380054, India
COMPANY
POLICIES
SUPPORT
MOBILE APPS
© Powered by OFG MANUFACTURING BUSINESSES PRIVATE LIMITED, All Rights Reserved